Corrib(R) resistors are ideal for applications involving high currents at very low resistance values--as low as 0.1 for the 300 Watt units. These large, heavy-duty resistors are designed to withstand frequent start-stop cycles characteristic of motor starting, dynamic braking and other similar applications. Special order units are available to accommodate up to 1500 watts. Corribs(R) are manufactured with corrugated resistive wire. To accelerate cooling, the wire is securely fused to the ceramic core by the protective vitreous enamel coating to improve durability Corrib resistors are hollow-core units which can be securely fastened to chassis surfaces with thru bolts and brackets. FEATURES * Ribbed construction aids in rapid cooling. * Designed for equipment requiring low resistance loads at low ohmic values and high current capacity. * Especially constructed for motor starting, dynamic braking, etc. SPECIFICATIONS Material Coating: Lead free vitreous enamel except for extreme low resistance 35 watt models, and very large models (1000 watts and up), which are supplied in Silicone Ceramic. Core: Tubular Ceramic. Terminals: Tinned lug with hole. Adjustable Lug: Supplied with adjustable 300 watt models. Part No. 1974-A or 1974-B. Electrical Tolerance: 10% (K) Power rating: Based on 25C free air rating. Derating: Linearly from 100% @ +25C to 0% @ +400C. Overload: 10 times rated wattage for 5 seconds. Temperature coefficient: 400 ppm/C. Dielectric withstanding voltage: 1000 VAC measured from terminal to mounting bracket. To calculate max. amps: use the formula P/R 280 Series Corrib(R) Fixed and Adjustable Vitreous Enamel Power Resistors Fixed 35 watt Diam. 0.173 in. 4.394 mm 0.375 in. 9.525 mm 0.094 in. 2.381 mm 0.563 in. 14.288 mm 0.625 in. 15.88 mm 2.0 in. 50.80 mm 0.3125 in. 7.938 mm Fixed/Adjustable 300 watt* Diam. 0.196 in. +.015/-.006 0.500 in. .030 4.979 mm +.381/-.153 12.7 mm .79 0.25 in. 6.35 mm 1.125 in. 28.58 mm 0.032 in. 0.813 mm min. 0.75 in. 19.05 mm 8.5 in. 215.90 mm 0.75 in. 19.05 mm * for values over 0.16, terminal dimensions same as 35 watt at above. Also available in low cost Centohm coating. Consult Factory. RESISTOR HARDWARE Thru Bolts Mounting Brackets for 300 Watt Corrib Includes 2 each bracket, bolt, washers (centering, mica, lock) and nut. Note: Single unit mounting contains 1 each bolt and nut; 2 each all Washers. Mounting Part No. No. of Derating Slotted Elongated Resistors % 6110-81/2 6126-P-81/2 1 100% - 6127-P-81/2 2 83% - 6128-P-81/2 3 80% - 6129-P-81/2 4 80% Extra Adjustable Lugs for 300 Watt Adjustable Corrib Part No. For 300 Watt Adjustable Corrib E300KR10 - E300KR63 1974-A E300K1R0 - E300K5R0 E300K8R0 - E300K20R 1974-B E300KR10 - E300KR31 E300KR80 & E300K6R3 STOCK PART NUMBERS FOR STANDARD RESISTANCE VALUES (Adjustable) Ohmic value (Adjustable) E300K---300 E300K---300 ---R80 ---1R0 ---1R2 ---1R25 ---1R6 ---2R0 ---2R5 ---3R1 ---4R0 ---5R0 ---6R3 ---8R0 ---10R ---12R ---16R ---20R ---100 C300K---300 0.8 1.0 1.2 1.25 1.6 2.0 2.5 3.1 4.0 5.0 6.3 8.0 10.0 12.0 16.0 20.0 100.0 Part No. Prefix Suffix C35K --- 35 C300K---300 ---R02 ---R04 ---R06 ---R08 ---410 ---R12 ---R15 ---R16 ---R20 ---R25 ---R30 ---R31 ---R40 ---R50 ---R60 ---R63 C35K --- 35 0.02 0.04 0.06 0.08 0.1 0.12 0.15 0.16 0.2 0.25 0.3 0.31 0.4 0.5 0.6 0.63 Other Available Sizes (Partial List) Wattage Part No. Prefix Suffix Ohmic value Wattage Prefix* C90 C100 C110 C135 C150 C160 C180 C190 C215 C220 C270 C375 C500 C750 C1000 C1500 Wattage Core Length 90 4.0" 100 3.5" 110 5.0" 135 6.0" 150 5.0" 160 6.0" 180 6.5" 190 6.0" 215 7.0" 220 6.0" 270 5.0" 375 10.5" 500 10.5" 750 12.0" 1000 15.0" 1500 20.0" *Substitute "C" in prefix with "E" for adjustable versions. Core O.D. 0.563" 0.75" 0.563" 0.563" 1.0" 0.75" 0.75" 1.0" 1.0" 1.125" 1.5" 1.125" 1.625" 2.5" 2.5" 2.5" Min. Ohms 0.021 0.021 0.029 0.028 0.043 0.038 0.031 0.056 0.068 0.063 0.065 0.130 0.190 0.310 0.410 0.560 Max. Ohms 12 11 16 21 27 26 29 35 43 39 41 80 117 198 258 358 = Most popular stock values = Stock values = Non-stock values subject to minimum handling charge per item Ohmite Mfg. Co. 1600 Golf Rd., Suite 850, Rolling Meadows, IL 60008 * Tel. 1-866-9-OHMITE * Fax 1-847-574-7522 * www.ohmite.com * info@ohmite.com 25