MEDIUM INTENSITY - TINTED ENCAPSULATION
LED
-BCR
-BCA
-BCG
Color
RED
AMB
GRN
Viewing
Angle
35
35
24
V/C
Table[3]
I
I
I
Iv[2]
(mcd)
120
100
80
λpk
(nm)
635
583
565
HIGH INTENSITY - WATERCLEAR ENCAPSULATION
LED
-NWR
-NWO
-NWA
-NWG
-NWB
-NWW[7]
-NWL[7]
-NKR
-NKO
-NKA
-NKG
-NKB
-NKW[7]
-NKL[7]
Color
RED
ORG
AMB
GRN
BLU
CWHT
WWHT
RED
ORG
AMB
GRN
BLU
CWHT
WWHT
Viewing
Angle
30
30
30
45
45
50
50
15
15
15
15
15
20
15
V/C
Table[3]
I
I
I
II
II
II
II
I
I
I
II
II
II
II
Iv[2]
(mcd)
2800
2000
2800
2400
700
2500
1800
3600
8000
3600
10000
3000
9200
9200
λpk
(nm)
634
605
592
520
465
634
605
592
520
465
.312" MOUNT PANEL LIGHTS
50 Series
445 S. Douglas Street, El Segundo, CA 90245-4630 • (800) 421-6815 • (310) 640-0442 • FAX (310) 640-7639
www.datadisplay.com
© 2005 Data Display Products
52
- Mounting Hardware Provided - For Detailed LED Data, See Discrete Section, MODEL 200
Data Display Products®
Model Wires
51 W
53[1] (optional)
54
56
561
564
TO ORDER, FOLLOW THE EXAMPLE:
Voltage[4]
2
5H
12H
15H
24H
28H
48H
60H
120[5]
Lens
Diffusion
-C
Clear
-N
Diffused
Bezel
Color
0
Black
9
White
Lens Lens Bezel
Model LED Voltage Diffusion Color Color
54 -ALP 2 -C A 9
1
3
4
Lens Color
R Red
A Amber
Y Yellow
GGreen
5
6
BBlue
WWater
Clear
-S Smoke[8]
1234 5 6
Select one BOLD component from each numbered category in the tables below.
Part Number 54-ALP2-CA9
➜
[1] Model 53 is available with Clear (-C) Lens only.
[2] Iv = typical luminous intensity @ If = 20mA (Ta =25°C). Iv is measured without lenses. For Low
Power LEDs, If = 2mA.
[3] See Voltage/Current table for design specifications. Design current for low power LEDs = 2mA.
[4] Ta = 25°C. Voltage 2 indicates external resistor required. Voltages 5H through 60H are VDC.
For AC operation, insert D after Voltage (e.g. 24HD), D indicates built-in rectifier; not required for 5H
or 120VAC. DC operation not available for 120V. Bi-Color and Tri-Color not available in AC voltages.
[5] Select high intensity LEDs only.
[6] Omit H when selecting a voltage (e.g. 51-RLP12-CWO).
[7] Select -CW or -NW lens only. -RAG wire leads: green anode/black cathode/red anode. -GAR wire
leads: green cathode/black anode/red cathode. Common lead is the first lead clockwise from
reference mark on header. Tri-Color 5 or 12 volt, omit H in part number.
[8] Omit Lens Diffusion when selecting smoked lens (e.g. 51-NWA12H-SO).
Voltage/Current
Design Max
Vf/If Vf/If
V/C Table II
5V/15mA 5.5V/23mA
12V/15mA 14V/20mA
15V/15mA 16.5V/18mA
24V/15mA 26V/18mA
28V/15mA 30V/17mA
48V/9.5mA 50V/10mA
60V/7mA 65V/8mA
120VAC/3.5mA 130VAC/4mA
Voltage/Current
Design Max
Vf/If Vf/If
V/C Table I
5V/22mA 5.5V/28mA
12V/20mA 14V/25mA
15V/24mA 16.5V/28mA
24V/17mA 26V/20mA
28V/16.5mA 30V/18mA
48V/15mA 50V/16mA
60V/9mA 65V/10mA
120VAC/3.5mA 130VAC/4mA
SPECIALTY LEDs
LED
-RLP[6]
-ALP[6]
-GLP[6]
-LRG[7]
-RAG[7]
-GAR[7]
Color
RED
AMB
GRN
RED/GRN
RED/AMB/GRN
GRN/AMB/RED
Viewing
Angle
50
50
50
60
60
50
V/C
Table[3]
[3]
[3]
[3]
I
I
I
Description
Low Power
Low Power
Low Power
Bi-Color. Red Cathode
Tri-Color, Common Cathode
Tri-Color, Common Anode
2
Iv[2]
(mcd)
2.3
2.1
2.3
90/40
6/6/6
5/5/5
λpk
(nm)
635
583
565
660/565
630/565
635/565
445 S. Douglas Street, El Segundo, CA 90245-4630 • (800) 421-6815 • (310) 640-0442 • FAX (310) 640-7639
www.datadisplay.com
© 2005 Data Display Products
53
.312" MOUNT PANEL LIGHTS
50 Series
Data Display Products®
51
53 54 (flush lens)
56 561
564 TC5 & NW5 Mounting Hardware
Standard Wire Leads:
6.0" total length(nominal)/.50" stripped (nominal), red
anode/black cathode, 24 AWG TPB UL1061 insulation.
Contact factory for other lengths, gauges and colors.
All dimensions are in inches (mm)
Tolerances: .xx"(.x) ±.025"(.63) / .xxx"(.xx)±.010"(.25)
Specifications are subject to change without notice.