Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-89 09
(800) 544-24 14
+44 2392-232392
Model A150N50
X
4B
Features:
• RoHS Compliant
• 150 Watts
• DC - 2.7 GHz
• AlN Ceramic
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Chip Termination
150 Watts, 50
Ω
Description
The A150N50X4B is high performance Aluminum Nitride (AlN) chip
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
combiners. The termination is also RoHS compliant!
General Specifications
Resistive Element Thick film
Substrate AlN Ceramic
Terminal Finish Matte Tin over Nickel Barrier
Operating Temperature -55 to +200°C (see de rating chart)
Tolerance is
±
0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
Electrical Specifications
Resistance Value: 50 Ohms, ± 2%
Power: 150 Watts
Frequency Range: DC – 2.7 GHz
Return Loss >26dB to 2.0 GHz
>20dB to 2.7 GHz
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change.
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
1 of 2
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
Model A150N50X4B
Typical Performance:
Power De-rating: Mounting Footprint and Procedure:
*Actual performance could be limited by the solder properties of the
application
Mounting Footprint and Procedure:
2 of 2
A150N50X4B
A
150N50X4B
