SIDACtor® Protection Thyristors
138
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
Electrical Characteristics
SIDACtor® Series - DO-214
SIDACtor® Series DO-214AA are designed to protect
baseband equipment such as modems, line cards, CPE and
DSL from damaging overvoltage transients.
The series provides a surface mount solution that enables
equipment to comply with global regulatory standards.
Description
AGENCY AGENCY FILE NUMBER
E133083
Agency Approvals
Features and Benefits
t Low voltage overshoot
t Low on-state voltage
t Does not degrade with
use
t Fails short circuit when
surged in excess of
ratings
t Low Capacitance
Part Number Marking
VDRM
@lDRM=5μA
VS
@100V/μs IHISIT
VT
@IT=2.2 Amps
Capacitance
@1MHz, 2V bias
V min V max mA min mA max A max V max pF min pF max
P0080SALRP P-8A 6 25 50 800 2.2 4 25 150
P0220SALRP P22A 15 32 50 800 2.2 4 25 150
P0300SALRP P03A 25 40 50 800 2.2 4 15 140
P0640SALRP P06A 58 77 150 800 2.2 4 40 60
P0720SALRP P07A 65 88 150 800 2.2 4 35 60
P0900SALRP P09A 75 98 150 800 2.2 4 25 55
P1100SALRP P11A 90 130 150 800 2.2 4 30 50
P1300SALRP P13A 120 160 150 800 2.2 4 25 45
P1500SALRP P15A 140 180 150 800 2.2 4 25 40
P1800SALRP P18A 170 220 150 800 2.2 4 25 35
P2100SALRP P21A 180 240 150 800 2.2 4 20 35
P2300SALRP P23A 190 260 150 800 2.2 4 25 35
P2600SALRP P26A 220 300 150 800 2.2 4 20 35
P3100SALRP P31A 275 350 150 800 2.2 4 20 35
P3500SALRP P35A 320 400 150 800 2.2 4 20 35
P0080SBLRP P-8B 6 25 50 800 2.2 4 25 150
P0220SBLRP P22B 15 32 50 800 2.2 4 25 150
P0300SBLRP P03B 25 40 50 800 2.2 4 15 140
P0640SBLRP P06B 58 77 150 800 2.2 4 40 80
Applicable Global Standards
t TIA-968-A
t TIA-968-B
t ITU K.20/21 Enhanced
Level*
t ITU K.20/21 Basic Level
t GR 1089 Inter-building*
t GR 1089 Intra-building
t IEC 61000-4-5
t YD/T 1082
t YD/T 993
t YD/T 950
*A/B-rated parts require series resistance
Pinout Designation
Schematic Symbol
Not Applicable
Table continues on next page.
SIDACtor® Protection Thyristors
139
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
Electrical Parameters (continued)
Part Number Marking
VDRM
@lDRM=5μA
VS
@100V/μs IHISIT
VT
@IT=2.2 Amps
Capacitance
@1MHz, 2V bias
V min V max mA min mA max A max V max pF min pF max
P0720SBLRP P07B 65 88 150 800 2.2 4 35 75
P0900SBLRP P09B 75 98 150 800 2.2 4 35 70
P1100SBLRP P11B 90 130 150 800 2.2 4 30 70
P1300SBLRP P13B 120 160 150 800 2.2 4 25 60
P1500SBLRP P15B 140 180 150 800 2.2 4 25 55
P1800SBLRP P18B 170 220 150 800 2.2 4 25 50
P2100SBLRP P21B 180 240 150 800 2.2 4 20 35
P2300SBLRP P23B 190 260 150 800 2.2 4 25 50
P2600SBLRP P26B 220 300 150 800 2.2 4 20 45
P3100SBLRP P31B 275 350 150 800 2.2 4 20 45
P3500SBLRP P35B 320 400 150 800 2.2 4 20 40
P0080SCLRP P-8C 6 25 50 800 2.2 4 45 260
P0220SCLRP P22C 15 32 50 800 2.2 4 30 240
P0300SCLRP P03C 25 40 50 800 2.2 4 25 250
P0640SCLRP P06C 58 77 150 800 2.2 4 55 155
P0720SCLRP P07C 65 88 150 800 2.2 4 50 150
P0900SCLRP P09C 75 98 150 800 2.2 4 45 140
P1100SCLRP P11C 90 130 150 800 2.2 4 45 115
P1300SCLRP P13C 120 160 150 800 2.2 4 40 105
P1500SCLRP P15C 140 180 150 800 2.2 4 35 95
P1800SCLRP P18C 170 220 150 800 2.2 4 35 90
P2100SCLRP P21C 180 240 150 800 2.2 4 30 90
P2300SCLRP P23C 190 260 150 800 2.2 4 30 80
P2600SCLRP P26C 220 300 150 800 2.2 4 30 80
P3100SCLRP P31C 275 350 150 800 2.2 4 30 70
P3500SCLRP P35C 320 400 150 800 2.2 4 25 65
Surge Ratings
Series
IPP ITSM
50/60 Hz di/dt
0.2x310 1
0.5x700 2
2x10 1
2x10 2
8x20 1
1.2x50 2
10x160 1
10x160 2
10x560 1
10x560 2
5x320 1
9x720 2
10x360 1
10x360 2
10x1000 1
10x1000 2
5x310 1
10x700 2
A min A min A min A min A min A min A min A min A min A min Amps/μs max
A2015015090507575457520 500
B 25 250 250 150 100 100 125 80 100 25 500
C 50 500 400 200 150 200 175 100 200 30 500
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Devices are bi-directional.
Notes:
1 Current waveform in μs
2 Voltage waveform in μs
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product.
- IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP$
- The device must initially be in thermal equilibrium with -40°C < TJ <¡$
SIDACtor® Protection Thyristors
140
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
25°C
Case Temperature (TC) - ºC
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-40 -20 0 20 40 60 80 100 120 140 160
Ratio of I
H
I
H
(T
C
= 25ºC)
Normalized VS Change vs. Junction Temperature
Normalized DC Holding Current vs. Case Temperature
IH
IT
IS
IDRM
VDRM
VT
+V
-V
+I
-I
VS
50
100
0
t
r
t
d
0
Peak
Value
Half Value
t – Time (μs)
I
PP
– Peak Pulse Current – %I
PP
t
r
= rise time to peak value
t
d
= decay time to half value
Waveform = t
r
x t
d
V-I Characteristics tr x td Pulse Waveform
Package Symbol Parameter Value Unit
DO-214AA TJOperating Junction Temperature Range UP °C
TSStorage Temperature Range UP °C
R0JA Thermal Resistance: Junction to Ambient 90 °C/W
Thermal Considerations
-8
-40 -20 0 20 40 60 80 100 120 140 160
-6
-4
0
2
4
6
8
10
12
14
Junction Temperature (T
J
) – °C
Percent of V
S
Change – %
25 °C
SIDACtor® Protection Thyristors
141
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
Physical Specifications Environmental Specifications
Lead Material Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material UL recognized epoxy meeting flammability
classification 94V-0
Time
Temperature
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
Soldering Parameters
Part Numbering
CONSTRUCTION
VARIABLE
REEL PACK
IPP RATING
RoHS COMPLIANT
TYPE
P = SIDACtor
P xLRP
MEDIAN VOLTAGE
PACKAGE TYPE
xxx 0S
High Temp Voltage
Blocking
80% Rated VDRM (VAC Peak ¡$PS¡$
504 or 1008 hrs. MIL-STD-750 (Method 1040)
JEDEC, JESD22-A-101
Temp Cycling
¡$UP¡$NJOEXFMMVQUP
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
Biased Temp &
Humidity
52 VDC¡$3)VQUPIST&*"
JEDEC, JESD22-A-101
High Temp Storage ¡$IST.*-45%.FUIPE
JEDEC, JESD22-A-101
Low Temp Storage -65°C, 1008 hrs.
Thermal Shock
¡$UP¡$NJOEXFMMTFDUSBOTGFS
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
Autoclave (Pressure
Cooker Test)
¡$3)BUNVQUPIST&*"
JEDEC, JESD22-A-102
Resistance to Solder
Heat ¡$TFDT.*-45%.FUIPE
Moisture Sensitivity
Level
3)¡$ISTSFnPXDZDMFT
¡$1FBL+&%&$+45%-FWFM
Reflow Condition Pb-Free assembly
(see Fig. 1)
Pre Heat
- Temperature Min (Ts(min))¡$
- Temperature Max (Ts(max))¡$
- Time (Min to Max) (ts)60-180 secs.
Average ramp up rate (Liquidus Temp (TL)
to peak) 3°C/sec. Max.
TS(max) to TL - Ramp-up Rate 3°C/sec. Max.
Reflow
- Temperature (TL) (Liquidus) ¡$
- Temperature (tL)60-150 secs.
Peak Temp (TP)¡$
Time within 5°C of actual Peak Temp (tp)30 secs. Max.
Ramp-down Rate 6°C/sec. Max.
Time 25°C to Peak Temp (TP)8 min. Max.
Do not exceed ¡$
Part Marking
Pxxx
Date Code
Part Marking Code
(Refer to Electrical Characteristics Table)
xxxxx
SIDACtor® Protection Thyristors
142
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
Baseband Protection (Voice-DS1)
Package Type Description Quantity Added Suffix Industry Standard
SDO-214AA
Tape & Reel Pack 2500 RP EIA-481-D
Packing Options
Tape and Reel Specification — DO-214AA
0.472
(12.0) 0.36
(9.2)
0.315
(8.0)
0.157
(4.0)
0.49
(12.4)
0.512 (13.0)
Arbor Hole Dia.
12.99
(330.0) Dimensions are in inches
(and millimeters).
Direction of Feed
0.059 DIA
(1.5)Cover tape
Dimensions — DO-214AA
0.079
(2.0)
0.110
(2.8)
0.079
(2.0)
Pad Outline
H
K
E
F
G
AC
B
D
Case
Temperature
Measurement
Point
inch
(millimeter)
Dimensions Inches Millimeters
Min Max Min Max
A 0.130 0.156 3.30 3.95
B 0.201 0.220 5.10 5.60
C 0.077 0.087 1.95 2.20
D 0.159 0.181 4.05 4.60
E 0.030 0.063 0.75 1.60
F 0.075 0.096 1.90 2.45
G 0.002 0.008 0.05 0.20
H 0.077 0.104 1.95 2.65
K 0.006 0.016 0.15 0.41