Product Bulletin
1510/1550 and 1550/1625 nm
Filter Wavelength Division
Multiplexers
The filter wavelength division multiplexers use
interference filters to add a supervisory channel for
active fiber monitoring. Stable and reliable, the
filter WDMs have wide bandwidth, low insertion
loss, and high channel isolation options.
Key Features
•Wide bandwidth
•High channel isolation
•Low insertion loss
•Low polarization sensitivity
•Stable and reliable
Applications
•Network control applications
•Amplifier chain control
•Network protocol information
Compliance
•Telcordia 1209 and 1221
FWDM 1510 | 2
Package Dimensions for 1510/1550 nm Package Dimensions for 1550/1625 nm
Performance for 1510/1550 nm Performance for 1550/1625 nm
5.5 mm
P
C (1510+1550)
R32 or 40 mm
5.5 mm
P
C (1625+1550)
R32 or 40 mm
0
5
10
0
1
5
20
0
2
5
30
0
35
1
5
1
0
1
5
4
0
1
5
7
0
1
600
1
630
1
660
WAVELENGTH
(
nm
)
A
TTENUATION
(
dB
)
REFLE
C
T
C
HANNE
L
PA
SS
C
HANNE
L
FWDM 1510 | 3
Ordering Information
ndicate your requirements by selecting one option from each configuration table. Please print the corresponding codes in the
available boxes to form your part number. For more information on this or other products and their availability, please
contact your JDS Uniphase account manager, or call 1-877-550-JDSU toll free in the U.S. and Canada, or visit
www.jdsuniphase.com.
Sample: FWDMDS1111110
Specifications
Parameter Standard Standard High Isolation High Isolation
Pass 1510 nm/ Pass 1550 nm/ Pass 1510 nm/ Pass 1550 nm/
Reflect 1550 nm Reflect 1510 nm Reflect 1550 nm Reflect 1510 nm
Pass port (C↔P) wavelength range λP1500 to 1520 nm 1529 to 1565 nm 1500 to 1520 nm 1529 to 1565 nm
Pass port (C↔P) insertion loss Typ. 0.7 dB 0.7 dB 1.1 dB 1.1 dB
Max. 0.9 dB 0.9 dB 1.4 dB 1.4 dB
Pass port (C↔P) flatness Max. 0.3 dB 0.3 dB 0.6 dB 0.6 dB
Pass port (C↔P) isolation at λRMin. 20 dB 20 dB 40 dB 40 dB
Reflect port (C↔R) wavelength range λR1529 to 1565 nm 1500 to 1520 nm 1529 to 1565 nm 1500 to 1520 nm
Reflect port (C↔R) insertion loss Typ. 0.3 dB 0.3 dB 0.3 dB 0.3 dB
Max. 0.5 dB 0.5 dB 0.5 dB 0.5 dB
Reflect port (C↔R) flatness Max. 0.1 dB 0.1 dB 0.1 dB 0.1 dB
Reflect port (C↔R) isolation at λPMin. 12 dB 12 dB 12 dB 12 dB
Directivity Min. 55 dB 55 dB 55 dB 55 dB
Optical return loss Min. 50 dB 50 dB 50 dB 50 dB
Polarization dependent loss Max. 0.1 dB 0.1 dB 0.1 dB 0.1 dB
Polarization mode dispersion Max. 0.1 ps 0.1 ps 0.1 ps 0.1 ps
Thermal stability Max. 0.005 dB/°C 0.005 dB/°C 0.005 dB/°C 0.005 dB/°C
Optical power Max. 250 mW 250 mW 250 mW 250 mW
Tensile load Max. 5 N 5 N 5 N 5 N
Operating temperature 0 to 70 °C 0 to 70 °C 0 to 70 °C 0 to 70 °C
Storage temperature -40 to 85 °C -40 to 85 °C -40 to 85 °C -40 to 85 °C
D1 1 1
Code Connector2
0 No connector1
1 FC/PC
2 FC/SPC
3 FC/APC
4 SC/SPC
5 SC/SPC
7D4
8ST
9 FC/UPC
A SC/UPC
1. Standard.
2. Insertion loss and return loss depend on
connector type.
Code Fiber Length
1 1 meter1
2 2 meters
3 3 meters
4 0.5 meters
5 1.5 meters
6 2.5 meters
Code Package
1 5.5 (D) x 32 (L) mm
250 µm fiber1
3 5.5 (D) x 40 (L) mm
900 µm loose tube
Code Wavelength
D 1510/1550 nm
FWDM
Code Model
1 Pass 1510 /reflect 1550
2 Pass 1550/reflect 1510 Code Fiber Type
1 Corning SMF-28
Code Isolation
S Standard
H High isolation
All information contained herein is believed to be accurate and is subject to change without notice. No responsibility is assumed for
its use. JDS Uniphase Corporation, its subsidiaries and affiliates, or manufacturer, reserve the right to make changes, without notice, to
product design, product components, and product manufacturing methods. Some specific combinations of options may not be
available. Please contact JDS Uniphase for more information. ©JDS Uniphase Corporation. All rights reserved.
10113903
U.S. and Canada Toll Free: 877-550-JDSU
www.jdsuniphase.com
FWDM 1510 | 4
Specifications
Parameter Pass 1550 nm/Reflect 1625 nm Pass 1625 nm/Reflect 1550 nm
Pass port (C↔P) wavelength range λP1529 to 1565 nm 1600 to 1650 nm
Pass port (C↔P) insertion loss Typical 0.7 dB 0.7 dB
Maximum 0.9 dB 0.9 dB
Pass port (C↔P) flatness Maximum 0.3 dB 0.3 dB
Pass port (C↔P) isolation at λRMinimum 30 dB 30 dB
Reflect port (C↔R) wavelength range λR1600 to 1650 nm 1529 to 1565 nm
Reflect port (C↔R) insertion loss Typical 0.3 dB 0.3 dB
Maximum 0.5 dB 0.5 dB
Reflect port (C↔R) flatness Maximum 0.1 dB 0.1 dB
Reflect port (C↔R) isolation at λPMinimum 12 dB 12 dB
Directivity Minimum 55 dB 55 dB
Optical return loss Minimum 50 dB 50 dB
Polarization dependent loss Maximum 0.1 dB 0.1 dB
Polarization mode dispersion Maximum 0.1 ps 0.1 ps
Thermal stability Maximum 0.005 dB/°C 0.005 dB/°C
Optical power Maximum 250 mW 250 mW
Tensile load Maximum 5 N 5 N
Operating temperature 0 to 70 °C 0 to 70 °C
Storage temperature -40 to 85 °C -40 to 85 °C
Ordering Information
Indicate your requirements by selecting one option from each configuration table. Please print the corresponding codes in
the available boxes to form your part number. For more information on this or other products and their availability, please
contact your JDS Uniphase account manager, or call 1-877-550-JDSU toll free in the U.S. and Canada, or visit
www.jdsuniphase.com.
Sample: FWDME01111110
SMF-28 is a registered trademark of Corning Incorporated.
ST is a registered trademark of Lucent Technologies.
Telcordia is a trademark of Telcordia Technologies, Inc.
E1 1 1
Code Connector2
0 No connector1
1 FC/PC
2 FC/SPC
3 FC/APC
4 SC/SPC
5 SC/SPC
7D4
8ST
9 FC/UPC
A SC/UPC
Code Fiber Length
1 1 meter1
2 2 meters
3 3 meters
4 0.5 meters
5 1.5 meters
6 2.5 meters
Code Package
1 5.5 (D) x 32 (L) mm
250 µm fiber1
3 5.5 (D) x 40 (L) mm
900 µm loose tube
Code Wavelength
E 1550/1625 nm
FWDM
Code Model
1 Pass 1625/reflect 1550
2 Pass 1550/reflect 1625
Code Fiber Type
1 Corning SMF-28
0
1. Standard.
2. Insertion loss and return loss depend on
connector type.
