CHEMTRONICS(R) TDS # 1217 Technical Data Sheet Duster PRODUCT DESCRIPTION Duster is a high pressure duster that removes particulates from electronic devices. This duster / cleaner is nonflammable, residue-free and won't scratch delicate surfaces. Nonflammable Leaves no residue High pressure for contamination control Nonabrasive Excellent material compatibility Penetrates hard to reach areas Contains no ozone depleting compounds TYPICAL APPLICATIONS Duster is engineered for all phases of electronic equipment maintenance and is particularly suited for applications involving: Audio/Video Equipment Fax Machines Keyboards Laboratory Instruments Microcomputers Photo Equipment Printers TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Boiling Point -15.7F 3.18 Vapor Density (air=1) @ 77F 0.10% by weight Solubility in Water @ 77F F/1 atm 1.21 Specific Gravity (water = 1 @77F) Evaporation Rate (butyl acetate=1) Appearance Odor Flash Point (TCC) Shelflife >1 Clear, Colorless Gas Slight Ethereal None 5 years RoHS/WEEE Status COMPATIBILITY Duster is generally compatible with most materials used in printed circuit board fabrication, including sensitive plastics and compounds. As with any duster/cleaner, compatibility must be determined on a noncritical area prior to use. ASSISTANCE Chemtronics(R) provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. Compatibility Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent Material Buna-N Graphite HDPE LDPE LexanTM Neoprene Cross-Linked PE Polyacrylate Polystyrene PVC Silicone Rubber TeflonTM VitonTM ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC CL Solv. VOC HFC ODP 0.0% 100.0% 0.0 CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown are the content by weight. Ozone depletion potential (ODP) is determined in accordance with the Montreal Protocol and U.S. Clean Air Act of 1990. The ODP of this product is 0.0. It is the sum of the ODP of the substances that may contribute to the depletion of stratospheric ozone, based upon the weight of each substance in the product's formulation. PERFORMANCE Pressure PSIG / Temperature F 200 P S I G 0.0% 0.0% 0.0% 150 100 - NOTE: 50 0 20 40 60 80 Temperature F 100 120 140 USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. No special surface preparation is required prior to using Duster. Direct high pressure spray onto the area to be cleaned to remove dust, dirt and other contaminants. For optimum performance and pin point control, use Duster with the attached extension tube. AVAILABILITY ES517 ES1017 ES1217 ES1617 5 oz. Aerosol 10 oz. Aerosol 8 oz. Aerosol 12 oz. Aerosol TECHNICAL & APPLICATION This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS(R) does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. MANUFACTURED BY: ITW CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 REV. G (06/06) 1-770-424-4888 DISTRIBUTED BY: