PRODUCT DESCRIPTION
Duster is a high pressure duster that removes
particulates from electronic devices. This
duster / cleaner is nonflammable, residue-free
and won’t scratch delicate surfaces.
Nonflammable
Leaves no residue
High pressure for contamination control
Nonabrasive
Excellent material compatibility
Penetrates hard to reach areas
Contains no ozone depleting compounds
TYPICAL APPLICATIONS
Duster is engineered for all phases of
electronic equipment maintenance and is
particularly suited for applications involving:
Audio/Video Equipment
Fax Machines
Keyboards
Laboratory Instruments
Microcomputers
Photo Equipment
Printers
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.7°F
Vapor Density (air=1)
@ 77°F
3.18
Solubility in Water
@ 77°F F/1 atm 0.10% by weight
Specific Gravity
(water = 1 @77°F) 1.21
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless Gas
Odor Slight Ethereal
Flash Point (TCC) None
Shelflife 5 years
RoHS/WEEE
Status
COMPATIBILITY
Duster is generally compatible with most
materials used in printed circuit board
fabrication, including sensitive plastics and
compounds. As with any duster/cleaner,
compatibility must be determined on a non-
critical area prior to use.
TDS # 1217
CHEMTRONICS®
Technical Data Sheet
Duster
Material Compatibility
Buna-N Excellent
Graphite Excellent
HDPE Excellent
LDPE Excellent
Lexan™ Excellent
Neoprene Excellent
Cross-Linked PE Excellent
Polyacrylate Excellent
Polystyrene Excellent
PVC Excellent
Silicone Rubber Excellent
Teflon™ Excellent
Viton™ Excellent
PERFORMANCE
Pressure PSIG / Temperature F
200
-
P 150
S -
I 100
G -
50
-
0
20 40 60 80 100 120 140
Temperature F
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required
prior to using Duster. Direct high pressure
spray onto the area to be cleaned to remove
dust, dirt and other contaminants. For
optimum perform ance and pin point control,
use Duster with the attached extension tube.
AVAILABILITY
ES517 5 oz. Aerosol
ES1017 10 oz. Aerosol
ES1217 8 oz. Aerosol
ES1617 12 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics® provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 0.0%
HCFC 0.0% HFC 100.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of this
product is 0.0. It is the sum of the ODP of the substances
that may contribute to the depletion of stratospheric ozone,
based upon the weight of each substance in the product’s
formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate and
use the data properly. CHEMTRONICS® does not
guarantee the accuracy of the data and assumes no liability
in connection with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. G (06/06)
DISTRIBUTED BY:
