MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 1Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Interference Suppression Film Capacitors
MKP Radial Potted Type
FEATURES
• AEC-Q200 qualified
• 7.5 mm to 27.5 mm lead pitch
• Supplied loose in box, taped on ammopack
or reel
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
For standard across the line X2 applications.
See also application note: www.vishay.com/doc?28153
Note
•For more detailed data and test requirements, contact rfi@vishay.com
QUICK REFERENCE DATA
Capacitance range (E12 series) 0.001 µF to 4.7 µF (preferred values acc. to E6)
Capacitance tolerance ± 20 %; ± 10 %; ± 5 %
Rated AC voltage 310 VAC; 50 Hz to 60 Hz
Permissible DC voltage 800 VDC at 85 °C
630 VDC at 110 °C
Climatic testing class (according to IEC 60068-1) 55/110/56/C for product volumes 1750 mm3
55/110/56/B for product volumes > 1750 mm3
Maximum application temperature C 470 nF: 110 °C (125 °C for less than 1000 h)
C > 470 nF: 110 °C
Leads Tinned wire
Reference standards
IEC 60384-14 and EN 60384-14
IEC 60065 requires pass. flamm. class B for volumes > 1750 mm3
UL 60384-14
CSA-E384-14
CQC
Dielectric Polypropylene film
Electrodes Metallized film
Construction
Mono construction
Encapsulation Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0
Marking
C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation;
code for dielectric material, manufacturer location; manufacturer’s logo or name;
year and week; safety approvals
DIMENSIONS in millimeters
w
Ø dt
l
P
h
lt
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 2Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
COMPOSITION OF CATALOG NUMBER
Notes
(1) For detailed tape specification refer to “Packaging Information”: www.vishay.com/doc?28139
(2) Taped on reel pitch = 27.5 mm is not available
BFC2 339 XX XX X
REBMUN EDOC.LOT-CSNOISNEMID DRADNATSGNIGAKCAPEPYT
339
X2
Loose in box
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
± 20 %
BFC2 339 20...
...22 933 2CFBmm0.1 ± mm0.5 htgnel daeL
...42 9
33 2CFBmm0.2 ± mm0.52 htgnel daeL
Taped (1)
Taped (1)
Taped (1)
Reel: H = 18.5 mm; P
0
...62 933 2CFBmm 0.51 ro mm 7.21 =
Ammopack: H = 18.5 mm; P
0
...82 933 2CFBmm 7.21 =
Loose in box
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
± 10 %
BFC2 339 10...
...21 933 2CFBmm0.1 ± mm0.5 htgnel daeL
...41 933 2CFBmm0.2 ± mm0.52 htgne
l daeL
Reel: H = 18.5 mm; P
0
...61 933 2CFBmm 0.51 ro mm 7.21 =
Ammopack: H = 18.5 mm; P
0
...81 933 2CFBmm 7.21 =
Loose in box
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
± 5 %
BFC2 339 50...
...25 933 2CFBmm0.1 ± mm0.5 htgnel daeL
...45 933 2CFBmm0.2 ± mm0.52 htgne
l daelL
Reel: H = 18.5 mm; P
0
...63 933 2CFBmm 0.51 ro mm 7.21 =
Ammopack: H = 18.5 mm; P
0
...83 933 2CFBmm 7.21 =
PACKAGING ALTERNATIVE LARGER PITCH SIZES C-TOL. CODE NUMBER
Loose in box
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
± 20 %
BFC2 339 21...
...32 933 2CFBmm0.1 ± mm0.5 htgnel daeL
...52 933 2CFBmm0.2 ± mm0.52 htgn
el daeL
Taped
(1)(2)
Reel or ammopack: H = 18.5 mm; P
0
...72 933 2CFBmm7.21=
Loose in box
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
± 10 %
BFC2 339 11...
...31 933 2CFBmm0.1 ± mm0.5 htgnel daeL
...51 933 2CFBmm0.2 ± mm0.52 htgnel d
aeL
Taped
(1)(2)
Reel or ammopack: H = 18.5 mm; P
0
...71 933 2CFBmm7.21=
Loose in box
Lead length 3.5 mm + 1 mm/- 0.5 mm or 3.5 mm ± 0.3 mm
± 5 %
BFC2 339 51...
...35 933 2CFBmm0.1 ± mm0.5 htgnel daeL
...55 933 2CFBmm0.2 ± mm0.52 htgnel d
aeL
Taped
(1)(2)
Reel: H = 18.5 mm; P
0
...64 933 2CFBmm 0.51 ro mm 7.21 =
Ammopack: H = 18.5 mm; P
0
...84 933 2CFBmm 7.21 =
TYPE AND PITCHES
339
X2
7.5 mm
10.0 mm
15.0 mm
22.5 mm
27.5 mm
MULTIPLIER
(nF)
CAPACITANCE
(numerically)
Example:
104 = 10 x 10 = 100 nF
0.1 2
3
4
5100
10
1
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 3Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169
SPECIFIC REFERENCE DATA
DESCRIPTION VALUE
Rated AC voltage (URAC)310 V
Permissible DC voltage (URDC)630 V
Tangent of loss angle: at 1 kHz at 10 kHz
C < 470 nF 10 x 10-4 20 x 10-4
470 nF C 1 µF 20 x 10-4 70 x 10-4
C > 1 µF 30 x 10-4 -
Rated voltage pulse slope (dU/dt)R at 435 VDC:
Pitch = 7.5 mm 600 V/µs
Pitch = 10 mm 600 V/µs
Pitch = 15 mm 400 V/µs
Pitch = 22.5 mm 150 V/µs
Pitch = 27.5 mm 100 V/µs
R between leads, for C 0.33 µF at 100 V; 1 min > 15 000 M
RC between leads, for C > 0.33 µF at 100 V; 1 min > 5000 s
R between leads and case; 100 V; 1 min > 30 000 M
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s:
C 1 µF 2200 V; 1 min
C > 1 µF 1800 V; 1 min
Withstanding (AC) voltage between leads and case 2120 V; 1 min
Max. application temperature for 0.001 µF C 0.47 µF 110 °C (125 °C for less than 1000 h)
Max. application temperature for C > 0.47 µF 110 °C
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 7.5 mm
URAC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (2)
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
LOOSE IN BOX AMMOPACK (1)
SHORT LEADS LONG LEADS H = 18.5 mm
P0 = 12.7 mm
It = 3.5 mm
+ 1 mm/- 0.5 mm
It = 5.0 mm
± 1.0 mm SPQ It = 25.0 mm
± 2.0 mm SPQ SPQ
310
PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 20 %
0.0010
4.0 x 9.0 x 10.0 0.4
20102 22102
1500
24102
1000
28102
1250
0.0015 20152 22152 24152 28152
0.0022 20222 22222 24222 28222
0.0033 20332 22332 24332 28332
0.0047 20472 22472 24472 28472
0.0068 20682 22682 24682 28682
0.010 20103 22103 24103 28103
0.015 20153 22153 24153 28153
0.022 20223 22223 24223 28223
0.033 20333 22333 24333 28333
0.047 5.0 x 10.5 x 10.0 0.4 20473 22473 1000 24473 1250 28473 1000
0.068 6.0 x 11.5 x 10.0 0.8 20683 22683 750 24683 1000 28683 750
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 4Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information
(2) Weight for short lead product only
310
PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 10 %
0.0010
4.0 x 9.0 x 10.0 0.45
10102 12102
1500
14102
1000
18102
1250
0.0012 10122 12122 14122 18122
0.0015 10152 12152 14152 18152
0.0018 10182 12182 14182 18182
0.0022 10222 12222 14222 18222
0.0027 10272 12272 14272 18272
0.0033 10332 12332 14332 18332
0.0039 10392 12392 14392 18392
0.0047 10472 12472 14472 18472
0.0056 10562 12562 14562 18562
0.0068 10682 12682 14682 18682
0.0082 10822 12822 14822 18822
0.010 10103 12103 14103 18103
0.012 10123 12123 14123 18123
0.015 10153 12153 14153 18153
0.018 10183 12183 14183 18183
0.022 10223 12223 14223 18223
0.027 10273 12273 14273 18273
0.033
5.0 x 10.5 x 10.0 0.6
10333 12333
1000
14333
1250
18333
10000.039 10393 12393 14393 18393
0.047 10473 12473 14473 18473
0.056 6.0 x 11.5 x 10.0 0.8 10563 12563 750 14563 1000 18563 750
PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-TOL. = ± 5 %
0.0010
4.0 x 9.0 x 10.0 0.45
50102 52102
1500
54102
1000
38102
1250
0.0012 50122 52122 54122 38122
0.0015 50152 52152 54152 38152
0.0018 50182 52182 54182 38182
0.0022 50222 52222 54222 38222
0.0027 50272 52272 54272 38272
0.0033 50332 52332 54332 38332
0.0039 50392 52392 54392 38392
0.0047 50472 52472 54472 38472
0.0056 50562 52562 54562 38562
0.0068 50682 52682 54682 38682
0.0082 50822 52822 54822 38822
0.010 50103 52103 54103 38103
0.012 50123 52123 54123 38123
0.015 50153 52153 54153 38153
0.018 50183 52183 54183 38183
0.022 50223 52223 54223 38223
0.027 50273 52273 54273 38273
0.033 5.0 x 10.5 x 10.0 0.6 50333 52333 1000 54333 1250 38333 1000
0.039 50393 52393 54393 38393
0.047 6.0 x 11.5 x 10.0 0.8 50473 52473 750 54473 1000 38473 750
0.056 50563 52563 54563 38563
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 7.5 mm
URAC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (2)
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
LOOSE IN BOX AMMOPACK (1)
SHORT LEADS LONG LEADS H = 18.5 mm
P0 = 12.7 mm
It = 3.5 mm
+ 1 mm/- 0.5 mm
It = 5.0 mm
± 1.0 mm SPQ It = 25.0 mm
± 2.0 mm SPQ SPQ
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 5Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 10 mm
URAC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
LOOSE IN BOX AMMOPACK (1) LARGE REEL
(500 mm) (1)(2)
SHORT LEADS LONG LEADS H = 18.5 mm
P0 = 12.7 mm
H = 18.5.mm
P0 = 15.0 mm
It = 3.5 mm
+ 1 mm/- 0.5 mm
It = 5.0 mm
± 1.0 mm SPQ It = 25.0 mm
± 2.0 mm SPQ SPQ SPQ
310
PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 %
0.0010
4.0 x 10.0 x 12.5 0.6
21102 23102
1000
25102
1250
27102
950 - -
0.0015 21152 23152 25152 27152
0.0022 21222 23222 25222 27222
0.0033 21332 23332 25332 27332
0.0047 21472 23472 25472 27472
0.0068 21682 23682 25682 27682
0.010 21103 23103 25103 27103
0.015 21153 23153 25153 27153
0.022 21223 23223 25223 27223
0.033 21333 23333 25333 27333
0.047 21473 23473 25473 27473
0.068 5.0 x 11.0 x 12.5 0.82 21683 23683 1000 25683 1000 27683 750 - -
0.100 6.0 x 12.0 x 12.5 1.1 20104 22104 750 24104 750 28104 600 26104 1500
PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 %
0.0010
4.0 x 10.0 x 12.5 0.6
11102 13102
1000
15102
1250
17102
950 - -
0.0012 11122 13122 15122 17122
0.0015 11152 13152 15152 17152
0.0018 11182 13182 15182 17182
0.0022 11222 13222 15222 17222
0.0027 11272 13272 15272 17272
0.0033 11332 13332 15332 17332
0.0039 11392 13392 15392 17392
0.0047 11472 13472 15472 17472
0.0056 11562 13562 15562 17562
0.0068 11682 13682 15682 17682
0.0082 11822 13822 15822 17822
0.010 11103 13103 15103 17103
0.012 11123 13123 15123 17123
0.015 11153 13153 15153 17153
0.018 11183 13183 15183 17183
0.022 11223 13223 15223 17223
0.027 11273 13273 15273 17273
0.033 11333 13333 15333 17333
0.039 11393 13393 15393 17393
0.047 11473 13473 15473 17473
0.056 5.0 x 11.0 x 12.5 0.82 11563 13563 1000 15563 1000 17563 750 --
0.068 10683 12683 14683 18683 16683 1900
0.082 6.0 x 12.0 x 12.5 1.1 10823 12823 750 14823 750 18823 600 16823 1500
0.100 10104 12104 14104 18104 16104
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 6Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
310
PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 %
0.0010
4.0 x 10.0 x 12.5 0.6
51102 53102
1000
55102
1250
48102
950 - -
0.0012 51122 53122 55122 48122
0.0015 51152 53152 55152 48152
0.0018 51182 53182 55182 48182
0.0022 51222 53222 55222 48222
0.0027 51272 53272 55272 48272
0.0033 51332 53332 55332 48332
0.0039 51392 53392 55392 48392
0.0047 51472 53472 55472 48472
0.0056 51562 53562 55562 48562
0.0068 51682 53682 55682 48682
0.0082 51822 53822 55822 48822
0.010 51103 53103 55103 48103
0.012 51123 53123 55123 48123
0.015 51153 53153 55153 48153
0.018 51183 53183 55183 48183
0.022 51223 53223 55223 48223
0.027 51273 53273 55273 48273
0.033 51333 53333 55333 48333
0.039 51393 53393 55393 48393
0.047 51473 53473 55473 48473
0.056 5.0 x 11.0 x 12.5 0.82 51563 53563 1000 55563 1000 48563 750 46563 1900
0.068 50683 52683 54683 38683 36683
0.082 6.0 x 12.0 x 12.5 1.1 50823 52823 750 54823 750 38823 600 36823 1500
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 10 mm
URAC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
LOOSE IN BOX AMMOPACK (1) LARGE REEL
(500 mm) (1)(2)
SHORT LEADS LONG LEADS H = 18.5 mm
P0 = 12.7 mm
H = 18.5.mm
P0 = 15.0 mm
It = 3.5 mm
+ 1 mm/- 0.5 mm
It = 5.0 mm
± 1.0 mm SPQ It = 25.0 mm
± 2.0 mm SPQ SPQ SPQ
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 7Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 15 mm
URAC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
LOOSE IN BOX LARGE REEL
(500 mm) (1)(2)
SHORT LEADS LONG LEADS H = 18.5 mm
P0 = 12.7 mm
It = 3.5 mm
± 0.3 mm
It = 5.0 mm
± 1.0 mm SPQ It = 25.0 mm
± 2.0 mm SPQ SPQ
310
PITCH = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 20 %
0.010
5.0 x 11.0 x 17.5 1
90001 90007
1250
90014
1000
90021
1100
0.015 90002 90008 90015 90022
0.022 90003 90009 90016 90023
0.033 90004 90011 90017 90024
0.047 90005 90012 90018 90025
0.068 90006 90013 90019 90026
0.10 21104 23104 25104 27104
0.15 6.0 x 12.0 x 17.5 1.4 20154 22154 1000 24154 1000 26154 900
PITCH = 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 %
0.22 7.0 x 13.5 x 17.5 1.8 20224 22224 750 24224 500 26224 800
0.33 8.5 x 15.0 x 17.5 2.4 20334 22334 750 24334 500 26334 650
0.47 10.0 x 16.5 x 17.5 3.0 20474 22474 500 24474 450 26474 600
8.5 x 17.5 x 18.0 3.1 90165 90166 300 90143 500 - -
0.56 11.0 x 18.5 x 18.0 4.3 90174 90175 225 90176 350 - -
0.68 11.0 x 18.5 x 18.0 5.5 90168 90169 225 90145 350 - -
PITCH = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 10 %
0.010
5.0 x 11.0 x 17.5 1.0
90027 90039
1250
90052
1000
90064
1100
0.012 90028 90041 90053 90065
0.015 90029 90042 90054 90066
0.018 90031 90043 90055 90067
0.022 90032 90044 90056 90068
0.027 90033 90045 90057 90069
0.033 90034 90046 90058 90071
0.039 90035 90047 90059 90072
0.047 90036 90048 90061 90073
0.056 90037 90049 90062 90074
0.068 11683 13683 15683 17683
0.082 11823 13823 15823 17823
0.100 11104 13104 15104 17104
0.12 6.0 x 12.0 x 17.5 1.4 10124 12124
1000 14124 1000 16124 900
0.15 10154 12154 14154 16154
PITCH = 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 %
0.18 7.0 x 13.5 x 17.5 1.8 10184 12184 750 14184 500 16184 800
0.22 10224 12224 14224 16224
0.27 8.5 x 15.0 x 17.5 2.4 10274 12274 750 14274 500 16274 650
0.33 10334 12334 14334 16334
0.33 9.3 x 14.0 x 18.5 2.9 - - - 74334 500 - -
0.39 10.0 x 16.5 x 17.5 3.0 10394 12394 500 14394 450 16394 600
0.47 10474 12474 14474 16474
0.56 11.0 x 18.5 x 18.0 4.3 90167 90157 225 90144 400 - -
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 8Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
310
PITCH = 15 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-TOL. = ± 5 %
0.010
5.0 x 11.0 x 17.5 1.0
90221 90232
1250
90243
1000
90254
1100
0.012 90222 90233 90244 90255
0.015 90223 90234 90245 90256
0.018 90224 90235 90246 90257
0.022 90225 90236 90247 90258
0.027 90226 90237 90248 90259
0.033 90227 90238 90249 90261
0.039 90228 90239 90251 90262
0.047 90229 90241 90252 90263
0.056 90231 90242 90253 90264
0.068 51683 53683 55683 46683
0.082 51823 53823 55823 46823
0.10 50104 52104 54104 36104
0.12 6.0 x 12.0 x 17.5 1.4 50124 52124 1000 54124 1000 36124 900
0.15 50154 52154 54154 36154
PITCH = 15 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 %
0.18 7.0 x 13.5 x 17.5 1.8 50184 52184 750 54184 500 36184 800
0.22
8.5 x 15.0 x 17.5 2.4
50224 52224
750
54224
500
36224
6500.27 50274 52274 54274 36274
0.33 50334 52334 54334 36334
0.39 10.0 x 16.5 x 17.5 3.0 50394 52394 500 54394 450 36394 600
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 22.5 mm
URAC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
LOOSE IN BOX LARGE REEL
(500 mm) (1)(2)
SHORT LEADS LONG LEADS H = 18.5 mm
P0 = 12.7 mm
It = 3.5 mm
± 0.3 mm
It = 5.0 mm
± 1.0 mm SPQ It = 25.0 mm
± 2.0 mm SPQ SPQ
310
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 %
0.15
6.0 x 15.5 x 26.0 2.4
21154 23154
300
25154
250
27154
6000.22 21224 23224 25224 27224
0.33 21334 23334 25334 27334
0.47 7.0 x 16.5 x 26.0 2.9 21474 23474 200 25474 250 27474 500
0.68 8.5 x 18.0 x 26.0 3.8 20684 22684 200 24684 250 26684 450
1.0 10.0 x 19.5 x 26.0 6.8 20105 22105 200 24105 200 26105 350
1.5 12.5 x 22.5 x 26.5 10 90103 90138 140 90139 400 90141 300
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 15 mm
URAC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
LOOSE IN BOX LARGE REEL
(500 mm) (1)(2)
SHORT LEADS LONG LEADS H = 18.5 mm
P0 = 12.7 mm
It = 3.5 mm
± 0.3 mm
It = 5.0 mm
± 1.0 mm SPQ It = 25.0 mm
± 2.0 mm SPQ SPQ
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 9Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• SPQ = Standard Packing Quantity
(1) H = In-tape height; P0 = Sprocket hole distance; for detailed specifications refer to packaging information
(2) Reel diameter = 356 mm is available on request
(3) Weight for short lead product only
310
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 %
0.12
6.0 x 15.5 x 26.0 2.4
11124 13124
300
15124
250
17124
600
0.15 11154 13154 15154 17154
0.18 11184 13184 15184 17184
0.22 11224 13224 15224 17224
0.27 11274 13274 15274 17274
0.33 11334 13334 15334 17334
0.33 8.5 x 14.0 x 26.5 3.6 - - - 75334 800 - -
0.39 7.0 x 16.5 x 26.0 2.9 11394 13394 200 15394 250 17394 500
0.47 11474 13474 15474 17474
0.47 8.5 x 14.0 x 26.5 3.6 - - - 75474 800 - -
0.56 8.5 x 18.0 x 26.0 3.8 10564 12564 200 14564 250 16564 450
0.68 10.0 x 19.5 x 26.0 6.8 10684 12684 200 14684 200 16684 350
0.82 10824 12824 14824 16824
1.0 12.0 x 22.0 x 26.0 7.8 10105 12105 150 14105 200 16105 300
PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 %
0.12
6.0 x 15.5 x 26.0 2.4
51124 53124
300
55124
250
46124
600
0.15 51154 53154 55154 46154
0.18 51184 53184 55184 46184
0.22 51224 53224 55224 46224
0.27 51274 53274 55274 46274
0.33 7.0 x 16.5 x 26.0 2.9 51334 53334 200 55334 250 46334 500
0.39 51394 53394 55394 46394
0.47 8.5 x 18.0 x 26.0 3.8 51474 53474 200 55474 250 46474 450
0.56 50564 52564 54564 36564
0.68 10.0 x 19.5 x 26.0 6.8 50684 52684 200 54684 200 36684 350
0.82 50824 52824 54824 36824
1.0 12.0 x 22.0 x 26.0 7.8 50105 52105 150 54105 200 36105 300
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 22.5 mm
URAC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (3)
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
LOOSE IN BOX LARGE REEL
(500 mm) (1)(2)
SHORT LEADS LONG LEADS H = 18.5 mm
P0 = 12.7 mm
It = 3.5 mm
± 0.3 mm
It = 5.0 mm
± 1.0 mm SPQ It = 25.0 mm
± 2.0 mm SPQ SPQ
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 10 Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• SPQ = Standard Packing Quantity
(1) Weight for short lead product only
ELECTRICAL DATA AND ORDERING INFORMATION - PITCH: 27.5 mm
URAC
(V)
CAP.
(μF)
DIMENSIONS
w x h x l
(mm)
MASS
(g) (1)
CATALOG NUMBER BFC2 339 XXXXX AND PACKAGING
LOOSE IN BOX
SHORT LEADS LONG LEADS
It = 3.5 mm ± 0.3 mm It = 5.0 mm ± 1.0 mm SPQ It = 25.0 mm ± 2.0 mm SPQ
310
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 20 %
0.47
9.0 x 19.0 x 31.5 5.5
90076 90078
100
90081
150
0.68 21684 23684 25684
1.0 11.0 x 21.0 x 31.0 7.4 21105 23105 100 25105 125
1.5 13.0 x 23.0 x 31.0 9.2 20155 22155 100 24155 125
2.2 15.0 x 25.0 x 31.5 12.3 20225 22225 100 24225 125
3.3 18.0 x 28.0 x 31.5 16.1 20335 22335 100 24335 100
4.7 21.0 x 31.0 x 31.0 20.3 20475 22475 50 24475 75
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 10 %
0.68 9.0 x 19.0 x 31.5 5.5 11684 13684 100 15684 150
0.82
11.0 x 21.0 x 31.0 7.4
11824 13824
100
15824
1251.0 11105 13105 15105
1.2 10125 12125 14125
1.5 13.0 x 23.0 x 31.0 9.2 10155 12155 100 14155 125
1.8
15.0 x 25.0 x 31.5 12.3
10185 12185
100
14185
125
2.2 10225 12225 14225
2.7 18.0 x 28.0 x 31.5 16.1 10275 12275 100 14275 100
3.3
21.0 x 31.0 x 31.0 20.3
10335 12335
50
14335
75
3.9 10395 12395 14395
PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-TOL. = ± 5 %
0.68 9.0 x 19.0 x 31.5 5.5 51684 53684 100 55684 150
0.82
11.0 x 21.0 x 31.0 7.4
51824 53824
100
55824
125
1.0 51105 53105 55105
1.2
13.0 x 23.0 x 31.0 9.2
50125 52125
100
54125
125
1.5 50155 52155 54155
1.8 15.0 x 25.0 x 31.5 12.3 50185 52185 100 54185 125
2.2
18.0 x 28.0 x 31.5 16.1
50225 52225
100
54225
100
2.7 50275 52275 54275
3.3 21.0 x 31.0 x 31.0 20.3 50335 52335 50 54335 75
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 11 Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MOUNTING
Normal Use
The capacitors are designed for mounting on printed circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the
printed-circuit board:
• For pitches 15 mm capacitors shall be mechanically fixed by the leads.
• For larger pitches the capacitors shall be mounted in the same way and the body clamped.
Space Requirements on Printed Circuit-Board
The maximum space for length (Imax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings:
• For products with pitch 15 mm, w = l = 0.3 mm, h = 0.1 mm
• For products with 15 mm < pitch 27.5 mm, w = l = 0.5 mm, h = 0.1 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
SOLDERING
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
•T
stg = - 25 °C to + 35 °C, RH maximum 75 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
APPROVALS
SAFETY APPROVALS X2 VOLTAGE VALUE FILE NUMBERS
EN 60384-14 (ENEC)
(= IEC 60384-14) 310 VAC 1 nF to 4.7 µF FI 2013003
UL 60384-14 310 VAC 1 nF to 4.7 µF E354331
CSA-E384-14 310 VAC 1 nF to 4.7 µF E354331
CQC 310 VAC 1 nF to 4.7 µF CQC 07001021281 (L)
CQC 06001018290 (F)
CB test certificate 310 VAC 1 nF to 4.7 µF FI 5123
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden; Switzerland and United Kingdom.
CBA116
Eccentricity
wmax. = W + Δ
hmax. = h + Δ
Imax. = I + Δ
Seating plane
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 12 Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CHARACTERISTICS
Capacitance as a function of ambient temperature
(typical curve)
Tangent of loss angle as a function of frequency
(typical curve)
Max. RMS voltage as a function of frequency
(typical curve)
Impedance as a function of frequency
(typical curve)
Resonant frequency as a function of capacitance
(typical curve)
Max. RMS current as a function of frequency
(typical curve)
typical
- 50
ΔC/C
(%)
2
- 2
- 4
- 6
0
T
amb
(°C)
4
max.
min.
050100
Dissipation
factor (x 10-4)
C ≤ 10 nF
10 nF < C ≤ 47 nF
103
102
101
100
101102103104105
f (Hz)
C > 1 µF
220 nF < C ≤ 1 µF
47 nF < C ≤ 220 nF
103
102
101
101102103104105
f (Hz)
T
amb
≤
110 °C
AC voltage
(V)
f (Hz)
103
100
10-1
102
101
10-2
10
6
10
5
10
4
10
7
10
8
Impedance
(Ω)
4700 nF
10 nF
47 nF
100 nF
470 nF
1000 nF
4.7 nF
1 nF
100
10-1
102
101
f (MHz)
C (nF)
X2
1 10 100 1000 10 000
103
104
100
10-1
102
101
101102103104105
f (Hz)
AC current
(mA)
470 nF
100 nF
47 nF
10 nF
1000 nF
1nF
4700 nF
4.7 nF
T
amb
≤ 110 °C
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 13 Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Insulation resistance as a function of ambient temperature
(typical curve)
APPLICATION NOTES
• For X2 electromagnetic interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum
mains voltage of 310 VAC.
• For series impedance applications we refer to application note www.vishay.com/doc?28153.
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For
information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com.
• These capacitors are not intended for continuous pulse application. For these situations capacitors of the AC and pulse
programs must be used.
• The maximum ambient temperature must not exceed 110 °C (125 °C for less than 1000 h) for C 470 nF and 110 °C for
C > 470 nF.
• Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 435 VDC and
divided by the applied voltage.
INSPECTION REQUIREMENTS
General Notes
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, IEC publication
IEC 60384-14 ed-3 and Specific Reference Data.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.1 Dimensions (detail) As specified in section “General data” of this
specification
Initial measurements Capacitance
Tangent of loss angle:
For C 1 µF at 10 kHz
For C > 1 µF at 1 kHz
4.3 Robustness of terminations Tensile: Load 10 N; 10 s
Bending: Load 5 N; 4 x 90°
No visible damage
106
105
104
020 40 60 80 100
Tamb (°C)
RC (s)
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 14 Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB-GROUP C1A PART OF SAMPLE OF
SUB-GROUP C1
4.4 Resistance to soldering heat No pre-drying
Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s
4.19 Component solvent resistance Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time:
Min. 1 h, max. 2 h
4.4.2 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 5 % of the value measured initially.
Tangent of loss angle Increase of tan :
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured initially
Insulation resistance As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
Initial measurements Capacitance
Tangent of loss angle:
For C 1 µF at 10 kHz
For C > 1 µF at 1 kHz
4.20 Solvent resistance of the marking Isopropylalcohol at room temperature
Method: 1
Rubbing material: Cotton wool
Immersion time: 5 min ± 0.5 min
No visible damage
Legible marking
4.6 Rapid change of temperature A = - 55 °C
B = + 110 °C
5 cycles
Duration t = 30 min
4.6.1 Inspection Visual examinationNo visible damage
4.7 Vibration Mounting: see section “Mounting” of this
specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
acceleration 98 m/s
(whichever is less severe)
Total duration 6 h
4.7.2 Final inspection Visual examinationNo visible damage
4.9 Shock Mounting: see section “Mounting” for more
information
Pulse shape: half sine
Acceleration: 490 m/s
Duration of pulse: 11 ms
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 15 Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB-GROUP C1B PART OF SAMPLE OF
SUB-GROUP C1
4.9.2 Final measurements Visual examination No visible damage
Capacitance |C/C| 5 % of the value measured initially.
Tangent of loss angle Increase of tan :
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured initially
Insulation resistance As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1
COMBINED SAMPLE OF SPECIMENS OF
SUB-GROUPS C1A AND C1B
4.11 Climatic sequence
4.11.1 Initial measurements Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
Measured initially in C1A and C1B
4.11.2 Dry heat Temperature: 110 °C
4.11.3 Damp heat cyclic
Test Db
First cycle
Duration: 16 h
4.11.4 Cold Temperature: - 55 °C
4.11.5 Damp heat cyclic
Test Db
remaining cycles
Duration: 2 h
4.11.6 Final measurements Visual examination
No visible damage
Legible marking
Capacitance |C/C| 5 % of the value measured in 4.11.1.
Tangent of loss angle Increase of tan :
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured in 4.11.1.
Voltage proof
1350 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB GROUP C2
4.12 Damp heat steady state 56 days; 40 °C; 90 % to 95 % RH
no load
4.12.1 Initial measurements Capacitance
Tangent of loss angle: at 1 kHz
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 16 Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB GROUP C2
4.12.3 Final measurements Visual examination No visible damage
Legible marking
Capacitance|C/C| 5 % of the value measured in 4.12.1.
Tangent of loss angle Increase of tan :
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured in 4.12.1.
Voltage proof
1350 VDC; 1 min between terminations
No permanent breakdown or flash-over
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C3
4.13.1 Initial measurements Capacitance
Tangent of loss angle:
For C 1 µF at 10 kHz
For C > 1 µF at 1 kHz
4.13 Impulse voltage 3 successive impulses, full wave, peak
voltage:
X2: 2.5 kV for C 1 µF
X2: 2.5 kV/C for C > 1 µF
Max. 24 pulses
No self healing breakdowns or flash-over
4.14 Endurance Duration: 1000 h
1.25 x URAC at 110 °C
Once in every hour the voltage is increased
to 1000 VRMS for 0.1 s via resistor of
47 ± 5 %
4.14.7 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 10 % compared to values measured
in 4.13.1.
Tangent of loss angle Increase of tan :
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured in 4.13.1.
Voltage proof
1350 VDC; 1 min between terminations
2120 VAC; 1 min between terminations
and case
No permanent breakdown or flash-over
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
MKP339 X2
www.vishay.com Vishay BCcomponents
Revision: 10-Jul-13 17 Document Number: 28138
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SUB-GROUP C4
4.15 Charge and discharge 10 000 cycles
charged to 435 VDC
Discharge resistance:
4.15.1 Initial measurements Capacitance
Tangent of loss angle:
For C 1 µF at 10 kHz
For C > 1 µF at 1 kHz
4.15.3 Final measurements Capacitance |C/C| 10 % compared to values measured
in 4.15.1.
Tangent of loss angle
Increase of tan :
0.008 for: C 1 µF or
0.005 for: C > 1 µF
Compared to values measured in 4.15.1.
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C5
4.16 Radio frequency characteristic Resonance frequency 0.9 times the value as specified in section
“Resonant Frequency” of this specification.
SUB-GROUP C6
4.17 Passive flammability
Class B
Bore of gas jet: Ø 0.5 mm
Fuel: butane
Test duration for actual volume V in mm:
V 250: 10 s
250 < V 500: 20 s
500 < V 1750: 30 s
V > 1750: 60 s
One flame application
After removing test flame from capacitor, the
capacitor must not continue to burn for more
than 10 s. No burning particle must drop
from the sample.
SUB-GROUP C7
4.18 Active flammability 20 cycles of 2.5 kV discharges on the test
capacitor connected to URAC
The cheese cloth around the capacitors shall
not burn with a flame.
No electrical measurements are required.
GROUP C INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
R435 VDC
1.25 x C dU dt
-------------------------------------------------
=
45.0°
~ 8 mm
12 mm
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
