Features * Tested and proved in RECOM filter design * RoHS compliant Line Inductors A c c e s s o r y * SMD RLS-186 Line Inductors for RECOM Power Supply Model Numbering RLS-186-R Inductance Packaging (1) Notes: Note1: with suffix -R", standard packaging tape and reel without suffix optional airbag packaging Specifications (measured @ Ta= 25C, unless otherwise stated) BASIC CHARACTERISTICS Parameter Condition Inductance DC Resistance Value L 100kHz/250V 18H 10% RDC @ 25C 100m max. Rated Current IR T 40C 1.89A max. Saturation Current Isat I L/LI < 10% 2.14A typ. Inductance vs. Current graph 18.5 Inductance [H] 18.0 17.5 17.0 16.5 16.0 15.5 0.0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Current [A] Impedance graph 105 Impedance [] 104 103 102 101 0 105 106 107 108 109 Frequenzy [Hz] www.recom-power.com REV.: 0/2019 P-1 RLS-186 A c c e s s o r y Specifications (measured @ Ta= 25C, unless otherwise stated) ENVIRONMENTAL Parameter Condition Value Operating Temperature Range with derating -40C to +105C Operating Humidity non-condensing 95% RH max. DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Dimension (LxWxH) 7.8 x 7.0 x 5.0mm Weight 1.00g typ. XXX 7.0 7. 8 Dimension Drawing (mm) 5.00.5 marking Recommended Footprint Details 8.0REF 7.5REF Tolerance: xx.x= 0.3mm 3.0REF APPLICATION INFORMATION Classification Reflow Profile for SMT 350 Temperature [C] 300 Peak Temperature 2505C 10 seconds max. 250 max. ramp up rate = 3C/s max. ramp down rate 6C/s 200 150 100 preheating liquidous 50 0 1 to 2 minutes 40 secondes Time www.recom-power.com REV.: 0/2019 P-2 RLS-186 A c c e s s o r y Specifications (measured @ Ta= 25C, unless otherwise stated) PACKAGING INFORMATION Parameter Packaging Dimension (LxWxH) Packaging Quantity Type tape and reel (carton) airbag tape and reel airbag Tape Width 1000pcs 50pcs 16.0mm Storage Temperature Range Storage Humidity Value 355.0 x 340.0 x 35.0mm 120.0 x 100.0 x 30.0mm -55C to +125C non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM's explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 0/2019 P-3