SB05-05C Ordering number : ENA0409 SANYO Semiconductors DATA SHEET SB05-05C Schottky Barrier Diode 50V, 500mA Rectifier Applications * High frequency rectification (switching regulators, converters, choppers). Features * * * * Low forward voltage (VF max=0.55V). Fast reverse recorvery time (trr max=10ns). Low switching noise. Low leakage current and high reliability due to highly reliable planar structure. Specifications Absolute Maximum Ratings at Ta=25C Parameter Repetitive Peak Reverse Voltage Symbol Conditions Ratings Unit VRRM VRSM 50 55 V Average Output Current IO 500 mA Surge Forward Current IFSM Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle V 5 A Junction Temperature Tj --55 to +125 C Storage Temperature Tstg --55 to +125 C Electrical Characteristics at Ta=25C Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR Interterminal Capacitance C Reverse Recovery Time trr Ratings Conditions min IR=200A, Tj=25C IF=500mA, Tj=25C Rthj-a(2) VR=25V, Tj=25C VR=10V, f=1MHz IF=IR=100mA, Tj=25C, See specified Test Circuit. Mounted in Cu-foiled area of 16mm20.2mm on glass epoxy board Unit max 50 Rthj-a(1) Thermal Resistance typ V 0.55 V 50 A 17 pF 10 ns 420 C / W 330 C / W Marking : B Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein. TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 71206 / 42506SB MS IM TB-00000745 No. A0409-1/3 SB05-05C trr Test Circuit 0.5 2.9 0.1 50 100 10 3 10s trr 1 0.5 2.5 1.5 5V 2 0.95 SANYO : CP 0.3 1.1 1 : Anode 2 : No Contact 3 : Cathode 0.05 0.4 IF -- VF 5 IR -- VR 5 2 3 C Ta=125 1000 1.0 7 5 Reverse Current, IR -- A 2 Ta 3 C C 5 2 =1 25 Forward Current, IF -- A 10mA Duty10% 100mA 100mA Package Dimensions unit : mm 7013A-004 2 0.1 7 5 3 5 100C 2 100 75C 5 2 50C 10 5 25C 2 1.0 5 2 2 0.1 0.01 0 0.2 0.4 0.6 0.8 1.0 0 1.2 500 (4) Rectangular wave (3) (2) (1) 360 Sine wave 100 180 360 0 0 100 200 40 50 60 70 ID00340 C -- VR f=1MHz 400 200 30 2 (1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180 300 20 Reverse Voltage, VR -- V PF(AV) -- IO 600 10 ID00339 300 400 Average Output Current, IO -- A 500 600 ID00341 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- mW Forward Voltage, VF -- V 100 7 5 3 2 10 7 5 3 1.0 2 3 5 7 10 2 3 Reverse Voltage, VR -- V 5 7 100 ID00342 No. A0409-2/3 SB05-05C IFSM -- t Surge Forward Current, IFSM(Peak) -- A 7 Current waveform 50Hz sine wave 6 IS 20ms t 5 4 3 2 1 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00343 Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 2006. Specifications and information herein are subject to change without notice. PS No. A0409-3/3