09/2008
169
R.41
Y2 / X1 CLASS (IEC 60384-14) MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: Interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor could lead to danger of electric shock.
PRODUCT CODE: R41
Note: R.41 series has replaced the R73 series (available
only upon request). For new design we suggest the
use of the R.41 series.
Ø
d ±0.05
p = 7.5 p = 10 p = 15 15<p≤27.5 p = 37.5
0.5 0.6 0.6 or 0.8* 0.8 1
* See size table.
All dimensions are in mm.
Loose Taped
Fig.1 Fig.2
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: Ø ≥ 0.6 tinned wire.
Ø = 0.5 tinned wire, low thermical conductivity.
Protection: plastic case, thermosetting resin lled. Box
material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic
category, passive ammability category, manufacturing date
code, approvals, manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to+110°C
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 300Vac / 1000Vdc; 50/60Hz
Capacitance range: 1000pF to 1.0µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Dissipation factor (DF):
tgδ x 10-4 at +25°C ±5°C: ≤30 (20)* at 1kHz
* Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
≥1 x 105 MΩ (5 x 105 MΩ )* for C ≤0.33µF
≥30000 s (150000 s)* for C >0.33µF
* Typical value
Test voltage between terminations (on all pieces):
2500Vac for 1 s + 5000Vdc for 1 s at +25°C±5°C
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40±2°C
Relative humidity (RH): 93 ±2%
Test duration: 56 days
Performance
Dielectric strength: no dielectric breakdown or
ashover at 1500Vac/1 min
Capacitance change |∆C/C|: ≤5%
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: 110°C±2°C
Test duration: 1000 h
Voltage applied: 1.7 x VR + 1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 1500Vac/1 min
Capacitance change |∆C/C|: ≤10%
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |∆C/C|: ≤2%
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
7.5 All B +0.1 H +0.1 L +0.2
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008 170
R.41
Y2 / X1 CLASS (IEC 60384-14) MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: Interference suppression and across-
the-line applications. Suitable for use in situations where
failure of the capacitor could lead to danger of electric shock.
PRODUCT CODE: R41
Rated
Cap.
300 Vac/1000Vdc
Std dimensions
Ø dMax
dv/dt at
420Vdc
(V/ µs)
Part Number
B H L p
1000 pF 4.0 9.0 10.0 7.5 0.5 800 R413D 1100 - - 00 -
2200 pF 4.0 9.0 10.0 7.5 0.5 800 R413D 1220 - - 00 -
3300 pF 5.0 10.5 10.0 7.5 0.5 800 R413D 1330 - - 00 -
4700 pF 6.0 12.0 10.5 7.5 0.5 800 R413D 1470 - - 00 -
1000 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1100 - - 00 -
1500 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1150 - - 00 -
2200 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1220 - - 00 -
3300 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1330 - - M1 -
4700 pF 5.0 11.0 13.0 10.0 0.6 800 R413F 1470 - - M1 -
6800 pF 6.0 12.0 13.0 10.0 0.6 800 R413F 1680 - - 00 -M
3300 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1330 - - 00 -
4700 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1470 - - 00 -
6800 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1680 - - 00 -
0.010 µF 5.0 11.0 18.0 15.0 0.6 600 R413I 2100 - - 00 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 600 R413I 2150 - - M1 -
0.022 µF 6.0 12.0 18.0 15.0 0.6 600 R413I 2220 - - M1 -
0.033 µF 7.5 13.5 18.0 15.0 0.6 600 R413I 2330 - - M1 -
0.047 µF 8.5 14.5 18.0 15.0 0.6 600 R413I 2470 - - M1 -
0.068 µF 11.0 19.0 18.0 15.0 0.8 600 R413I 2680 - - 00 -
0.047 µF 6.0 15.0 26.5 22.5 0.8 500 R413N 2470 - - 00 -
0.068 µF 6.0 15.0 26.5 22.5 0.8 500 R413N 2680 - - M1M -
0.068 µF 7.0 16.0 26.5 22.5 0.8 500 R413N 2680 - - 00 -
0.10 µF 8.5 17.0 26.5 22.5 0.8 500 R413N 3100 - - M1 -
0.15 µF 10.0 18.5 26.5 22.5 0.8 500 R413N 3150 - - M1 -
0.22 µF 13.0 22.0 26.5 22.5 0.8 500 R413N 3220 - - 00
0.22 µF 13.0 22.0 32.0 27.5 0.8 400 R413R 3220 - - 00 -
0.33 µF 14.0 28.0 32.0 27.5 0.8 400 R413R 3330 - - 00 -
0.47 µF 18.0 33.0 32.0 27.5 0.8 400 R413R 3470 - - 00 -
0.68 µF 18.0 33.0 32.0 27.5 0.8 400 R413R 3680 - - 00 -
0.47 µF 13.0 24.0 41.5 37.5 1.0 300 R413W 3470 - - 00 -
0.68 µF 16.0 28.5 41.5 37.5 1.0 300 R413W 3680 - - 00 -
1.0 µF 20.0 40.0 41.5 37.5 1.0 300 R413W 4100 - - 00 -
E12 Series available upon request
All dimensions are in mm.
Mechanical version and packaging (Table1)
Tolerance: K (±10%); M (±20%)
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESS
IN PROGRESS
IN PROGRESS
IN PROGRESS
IN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
IN PROGRESSIN PROGRESS
IN PROGRESS
1000 pF
IN PROGRESS
1000 pF
9.0
IN PROGRESS
9.0
10.0
IN PROGRESS
10.0
7.5
IN PROGRESS
7.5
0.5
IN PROGRESS
0.5
800
IN PROGRESS
800
R413D 1100 - - 00 -
IN PROGRESS
R413D 1100 - - 00 -
2200 pF
IN PROGRESS
2200 pF2200 pF
9.0
IN PROGRESS
9.09.0
10.0
IN PROGRESS
10.010.0
7.5
IN PROGRESS
7.57.5
0.5
IN PROGRESS
0.50.5
800
IN PROGRESS
800800
R413D 1220 - - 00 -
IN PROGRESS
R413D 1220 - - 00 -R413D 1220 - - 00 -
3300 pF
IN PROGRESS
3300 pF
5.0
IN PROGRESS
5.0
10.5
IN PROGRESS
10.5
10.0
IN PROGRESS
10.0
7.5
IN PROGRESS
7.5
0.5
IN PROGRESS
0.5
800
IN PROGRESS
800
R413D 1330 - - 00 -
IN PROGRESS
R413D 1330 - - 00 -
4700 pF
IN PROGRESS
4700 pF4700 pF
6.0
IN PROGRESS
6.06.0
12.0
IN PROGRESS
12.012.0
10.5
IN PROGRESS
10.510.5
7.5
IN PROGRESS
7.57.5
0.5
IN PROGRESS
0.50.5
800
IN PROGRESS
800800
R413D 1470 - - 00 -
IN PROGRESS
R413D 1470 - - 00 -R413D 1470 - - 00 -
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
AMMO-PACK
6.35
12.70
19.05
1
1
2
7.5
10.0/15.0
22.5
DQ
DQ
DQ
REEL Ø 355mm
REEL Ø 500mm
REEL Ø 500mm
6.35
12.70
19.05
1
1
2
7.5
10.0/15.0
22.5/27.5
CK
CK
CK
Loose, short leads
Loose, long leads
(p<10mm)
Loose, long leads
(p=10mm)
Loose, long leads
(p≥15mm)
44 +2
17 +1/-2
25 ±1
25 +2/-1
30 +5
00
Z3
JY
50
40
Note: Ammo-pack is the preferred packaging for taped
version
APPROVALS
(*)
ENEC
IEC 60384-14 Class Y2 / X1 File No. V4160
UL 1414
(250Vac- 85°C) Across-the-line FileNo.E97797
CSA - C22.2 No.1
(250Vac- 85°C)
Across-the-line
certi ed for
Canada
File No. E 97797
UL 1283
(300 Vac-110°C)
Electromagnetic
Interference
Filters
File No. E85238
CSA - C22.2 No.8
(300 Vac-110°C)
Electromagnetic
Interference
Filters certi ed
for Canada
File No.E85238
GB IT 14472 Class Y2 / X1
File CQC03001006820
CQC03001006821
(in progress for pitch 7.5 mm)
Approved according to IEC 60384-14
According to IEC 60065.
(*) ENEC mark has replaced all the following European
National marks:
Not for use in series with the mains.
See www.kemet.com for more information.