Page 1HPR7XX REV B 6/98
3400 E. Britannia Drive • Tucson, Arizona 85706 • Phone: 520.295.4100 • Fax: 520.770.9369 • Internet: http://www.cdpo werelectronics.com
Product Data Sheet 5 WATT UNREGULATED
SIP DC/DC CONVERTER
HPR7XX
DESCRIPTION
The HPR7XX Series provides high power densities where space
is critical. The small SIP package measures only 2.2" x .3" x .4"
(56 x 9 x 10 mm). Designed for high density boards, the package
is non-conductive, which presents advantages over painted
metal enclosures.
The series includes many different voltage models (other input
and output voltages are available upon request), all set in a low
thermal resistance molding compound, called Iso-ThermoFlex,
which provides excellent heat dissipation of internal compo-
nents. The use of surface mount devices and manufacturing
processes, combined with the encapsulation process, assure the
user that the product is more environmentally rugged than any
other DC/DC converter of its type.
Operation down to no load will not impact the reliability of the
series, although this product has a 10mA minimum load for
specification purposes. It is recommended that all pins be used
for current carrying capacity even though duplicate pin-outs are
internally connected.
The HPR7XX has 500VDC isolation barrier between input and
output, offering the designer maximum flexibility in grounding
options and polarity configurations. The outstanding MTTF,
superior reliability, and low cost make it an excellent choice for
any high power- density applications.
FEATURES
●●
●●
●EFFICIENCY >80%
●●
●●
●SIP PACKAGE
●●
●●
●HIGH POWER DENSITY: > 16 WATTS/INCH3
●●
●●
●LOW COST
●●
●●
●SINGLE AND DUAL OUTPUTS
●●
●●
●INTERNAL INPUT AND OUTPUT FILTERING
●●
●●
●SIX-SIDED SHIELDING
MECHANICAL
15. COM
19. COM
20. -VOUT
15. +VOUT
19. -VOUT
20. -VOUT
7. -VIN
9. -VIN
14. +VOUT
1. +VIN
2. +VIN
6. -VIN
All dimensions are in inches (millimeters)
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ±0.015"
1. +VIN
2. +VIN
6. -VIN
7. -VIN
9. -VIN
14. +VOUT
PIN CONNECTIONS: Duals
PIN CONNECTIONS: Singles
TOP
VIEW
FRONT
VIEW
BOTTOM
VIEW
RIGHT SIDE
VIEW
2.210 + 0-.10
(56.13)
0.020 + .002
(0.51)
0.155 + -.15
(3.94)
0.030 + -.010
(0.76)
0.400 + .010
(10.16)
0.140 + .020
(3.56)
0.340 + .010
(8.64)
0.010 + .002
(0.25)
0.050 + .015
(1.27)
0.140 + .020
(3.56)
C L
1 2 6 7 9 14 15 19 20
Page 2 HPR7XX REV B 6/98
NOMINAL RATED RATED INPUT CURRENT REFLECTED
INPUT OUTPUT OUTPUT NO LOAD RATED LOAD RIPPLE EFFICIENCY
VOLTAGE VOLTAGE CURRENT CURRENT
MODEL (VDC) (VDC) (mA) (mA) (mA) (mAp-p) (%)
HPR700 5 5 1000 70 1250 15 80
HPR703 5 ± 5 ±500 70 1250 15 80
HPR704 5 ±12 ±208 70 1190 15 84
HPR705 5 ±15 ±167 70 1190 15 84
HPR706 12 5 1000 25 490 15 80
HPR710 12 ±12 ±208 25 490 15 85
HPR711 12 ±15 ±167 25 490 15 85
HPR712 15 5 1000 20 407 15 82
HPR717 15 ±15 ±167 20 392 15 85
Note: Other input to output voltage options may be available. Please consult factory.
ELECTRICAL CHARACTERISTICS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
ORDERING INFORMATION
HPR 7XX /H
Device Family
HPR indicates DC/DC converter
Model Number
Screening Option
COMMON SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
PARAMETER CONDITIONS MIN TYP MAX UNITS
INPUT
Voltage Range 4.75 5 5.25 VDC
11.4 12 12.6 VDC
14.2 15 15.8 VDC
Voltage Rise Time See Application Note: "Capacitive Loading Effects on Start-Up of DC/DC Converters"
ISOLATION
Rated Voltage 500 VDC
Test Voltage 60 Hz, 10 seconds 500 Vpk
Resistance 1 GW
Capacitance 55 pF
Leakage Current VISO= 240VAC, 60Hz 5 µArms
OUTPUT
Rated Power 5 W
Voltage Setpoint Accuracy Rated Load, Nominal VIN ±3 %
Temperature Coefficent ±0.05 %/Deg C
Ripple & Noise BW = DC to 10MHz 50 mVp-p
BW =10Hz to 2MHz 5 mVrms
Voltage IL=10mA, VOUT = 5V 5.75 VDC
IL=10mA, VOUT = ±12V 13.10 VDC
IL=10mA, VOUT = ±15V 16.25 VDC
REGULATION
Line Regulation High Line to Low Line 1.2 %/%Vin
Load Regulation (5V out only) Rated Load to No Load 15 %
Load Regulation (All other Models) Rated Load to No Load 10 %
GENERAL
Switching Frequency 170 kHz
Package Weight 7 g
MTTF per MIL-HDBK-217, Rev. E Circuit Stress Method
Ground Benign TA = +25°C 2000 kHr
TEMPERATURE
Specification -25 +25 +70 °C
Operation -40 +85 °C
Storage -40 +110 °C
ABSOLUTE MAXIMUM RATINGS
Internal Power Dissipation.......................................................................1.7W
Short Circuit Protection..................................................................Momentary
Lead Temperature (soldering, 10 seconds max)................................+300°C
Page 3HPR7XX REV B 6/98
The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracie s or omissions. C&D TECHNOLOGIES assumes no responsibility
for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any
of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life support devices/systems
or in aircraft control applications.
TYPICAL PERFORMANCE CURVES
Specifications typical at TA = +25°C, rated input voltage, rated output current unless otherwise specified.
5.6
5.4
5.2
5.0
4.810 250 500 750 1000
5.6
5.4
5.2
5.0
4.810 250 500 750 1000
12.6
12.4
12.2
12.0
11.810 250 500 750 1000
15.6
15.4
15.2
15.0
14.810 250 500 750 1000
Output Current (mA) Output Current (mA)
Output Current (mA) Output Current (mA)
VOUT VS LOAD
(5VOUT Models) VOUT VS LOAD
(+5VOUT Models)
VOUT VS LOAD
(+15VOUT Models)
VOUT VS LOAD
(+12VOUT Models)
Vout
Vout
Vout Vout
Page 4 HPR7XX REV B 6/98
ENGINEERING NOTES
