25TTS08STRL - International Rectifier

SURFACE MOUNTABLE

PHASE CONTROL SCR

Bulletin I2117 rev. D 12/98

SAFE

Series

25TTS..S

VT< 1.25V @ 16A

ITSM = 300A

RRM 800 to 1600V

www.irf.com

Major Ratings and Characteristics

D2 PAK (SMD-220)

IT(AV) Sinusoidal 16 A

waveform

IRMS 25 A

VRRM/

VDRM up to 1600 V

ITSM 300 A

VT@ 16 A, TJ = 25°C 1.25 V

dv/dt 500 V/µs

di/dt 150 A/µs

TJ- 40 to 125 °C

Characteristics 25TTS..S Units

Output Current in Typical Applications

TA = 55°C, TJ = 125°C, footprint 300mm2

NEMA FR-4 or G10 glass fabric-based epoxy 3.5 5.5

with 4 oz (140µm) copper

Aluminum IMS, RthCA = 15°C/W 8.5 13.5 A

Aluminum IMS with heatsink, RthCA = 5°C/W 16.5 25.0

Applications Single-phase Bridge Three-phase Bridge Units

Description/Features

The 25TTS..S SAFE

series of silicon controlled

rectifiers are specifically designed for medium

power switching and phase control applications.

The glass passivation technology used has reli-

able operation up to 125° C junction temperature.

Typical applications are in input rectification (soft

start) and these products are designed to be used

with International Rectifier input diodes, switches

and output rectifiers which are available in identical

package outlines.

25TTS..S SAFEIR Series

Bulletin I2117 rev. D 12/98

www.irf.com

Part Number

VRRM, maximum VDRM , maximum IRRM/IDRM

peak reverse voltage peak direct voltage 125°C

VVmA

25TTS08S 800 800 10

25TTS12S 1200 1200

25TTS16S 1600 1600

Voltage Ratings

IT(AV) Max. Average On-state Current 16 A @ TC = 93° C, 180° conduction half sine wave

IRMS Max. RMS On-state Current 25

ITSM Max. Peak One Cycle Non-Repetitive 3 00 10ms Sine pulse, rated VRRM

applied

Surge Current 350 10ms Sine pulse, no voltage reapplied

I2t Max. I2t for fusing 450 A2s 10ms Sine pulse, rated VRRM

applied

630 10ms Sine pulse, no voltage reapplied

I2√t Max. I2√t for fusing 6300 A2√s t = 0.1 to 10ms, no voltage reapplied

VTM Max. On-state Voltage Drop 1.25 V @ 16A, TJ = 25°C

rtOn-state slope resistance 12.0 mΩTJ = 125°C

VT(TO) Threshold Voltage 1.0 V

IRM/IDM Max.Reverse and Direct 0.5 mA TJ = 25 °C

Leakage Current 10 TJ = 125 °C

IHHolding Current Typ. Max. Anode Supply = 6V, Resistive load, Initial IT=1A

-- 100 mA 25TTS08S, 25TTS12S

100 150 25TTS16S

IL Max. Latching Current 200 mA Anode Supply = 6V, Resistive load

dv/dt Max. Rate of Rise of off-state Voltage 500 V/µs

di/dt Max. Rate of Rise of turned-on Current 150 A/µs

Absolute Maximum Ratings

Parameters 25TTS..S Units Conditions

VR = rated VRRM/ VDRM

25TTS..S SAFEIR Series

Bulletin I2117 rev. D 12/98

www.irf.com

Triggering

PGM Max. peak Gate Power 8.0 W

PG(AV) Max. average Gate Power 2.0

+ IGM Max. paek positive Gate Current 1.5 A

- VGM Max. paek negative Gate Voltage 10 V

IGT Max. required DC Gate Current 60 mA Anode supply = 6V, resistive load, TJ = - 10°C

to trigger 45 Anode supply = 6V, resistive load, TJ = 25°C

20 Anode supply = 6V, resistive load, TJ = 125°C

VGT Max. required DC Gate Voltage 2.5 V Anode supply = 6V, resistive load, TJ = - 10°C

to trigger 2.0 Anode supply = 6V, resistive load, TJ = 25°C

1.0 Anode supply = 6V, resistive load, TJ = 125°C

VGD Max. DC Gate Voltage not to trigger 0.25 TJ = 125°C, VDRM = rated value

IGD Max. DC Gate Current not to trigger 2.0 mA TJ = 125°C, VDRM = rated value

Parameters 25TTS..S Units Conditions

Switching

Parameters 25TTS..S Units Conditions

tgt Typical turn-on time 0.9 µs TJ = 25°C

trr Typical reverse recovery time 4 TJ = 125°C

tqTypical turn-off time 110

TJMax. Junction Temperature Range - 40 to 125 °C

Tstg Max. Storage Temperature Range - 40 to 125 °C

Soldering Temperature 240 °C for 10 seconds (1.6mm from case)

RthJC Max. Thermal Resistance Junction 1.1 °C/W DC operation

to Case

RthJA Typ. Thermal Resistance Junction 40 °C/W

to Ambient (PCB Mount)**

wt Approximate Weight 2 (0.07) g (oz.)

T Case Style D2 Pak (SMD-220)

Thermal-Mechanical Specifications

Parameters 25TTS..S Units Conditions

**When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W

For recommended footprint and soldering techniques refer to application note #AN-994

25TTS..S SAFEIR Series

Bulletin I2117 rev. D 12/98

www.irf.com

Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics

Fig. 3 - On-state Power Loss Characteristics Fig. 4 - On-state Power Loss Characteristics

Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current

100

110

120

130

0 5 10 15 20

30°60° 90° 120° 180°

Maximum Allow abl e Case T emperature (°C)

Conduction Angle

Averag e On-sta te Curren t (A )

25TTS.. Series

R (DC) = 1.1 °C/W

thJC

100

110

120

130

0 5 10 15 20 25 30

30°60° 90°120°180°

Average On-state Current (A)

Max imum A llowable C as e Tem pera t ur e ( °C)

Conduction Period

25T TS.. Series

R (DC) = 1.1 °C/W

thJC

048121620

RMS Limit

Conduction Angle

Maximum Averag e On-state Powe r Lo ss (W)

A vera ge On-stat e Current (A)

180°

120°

90°

60°

30°

2 5TTS.. Series

T = 125°C

0 5 10 15 20 25 30

180°

120°

90°

60°

30°

RM S Limit

Conduction Period

Maxi mum Averag e On-state Po wer Loss (W )

Average On-state Current (A)

25TTS.. Series

T = 125°C

150

200

250

300

350

1 10 100

Number Of Equal Amplitude Half Cycle Current Pulses (N)

Peak Half Sine Wave On-state Current (A)

Initial T = 125°C

@ 60 H z 0. 0083 s

@ 50 H z 0. 0100 s

25TTS.. Series

At Any R at e d L oad Con d itio n A nd With

Rated V Applied Following Surge.

RRM

100

150

200

250

300

350

400

0.01 0.1 1

P ea k Ha l f Sine Wav e On-s tate Current (A)

Pulse Train Duration (s)

Max imum N on Repe titi ve Surge C urrent

Versus Pulse T rain Durati on. Control

Of Con duc ti on M a y Not Be Ma i ntai n ed.

Initial T = 125°C

No Voltage Reapplied

Rated V Reapplied

RRM

25T TS. . Se ri es

25TTS..S SAFEIR Series

Bulletin I2117 rev. D 12/98

www.irf.com

Fig. 7 - On-state Voltage Drop Characteristics

Fig. 8 - Gate Characteristics

Fig. 9 - Thermal Impedance ZthJC Characteristics

100

1000

012345

T = 25°C

Instantaneous On-state Current (A)

In s tan ta n eou s O n -s ta te V ol tage ( V )

T = 125°C

25TTS.. Series

0.01

0.1

0.0001 0.001 0.01 0.1 1 10

Square Wave Pulse Duration (s)

Steady State Valu e

(DC O per atio n)

Single Pulse

D = 0. 50

D = 0. 33

D = 0. 25

D = 0. 17

D = 0.08

25TTS.. Series

thJC

T r ansient Ther m al Imped ance Z (°C/W)

0.1

100

0.001 0.01 0.1 1 10 100

(b) (a)

Rectangular gate pulse

(4) (3) (2) (1)

Inst anta ne ous Ga te C urrent (A)

I nstantaneous Gate Voltage (V)

TJ = 25 °C

TJ = 125 °C

b)Recommended load line for

Frequency Limited by PG(AV )

a)Recommended load line for

rated di/dt: 10 V, 20 ohms

tr = 0.5 µs, tp >= 6 µs

TJ = -10 °C

25 TTS.. Ser ies

IGD

VGD

<= 30% rated di/dt: 10 V, 65 ohms

tr = 1 µs, tp >= 6 µs

( 1) PGM = 40 W, tp = 1 m s

( 2) PGM = 20 W, tp = 2 m s

(3) PG M = 8 W, tp = 5 ms

(4) PGM = 4 W, tp = 10 ms

25TTS..S SAFEIR Series

Bulletin I2117 rev. D 12/98

www.irf.com

9G3A

25TTS16S

9512

EXAMPLE: THIS IS AN 25TTS16S

INTERNATIONAL

RECTIFIER LOGO

PART NUMBER

Marking Information

DATE CODE (YYWW)

YY = YEAR

WW = WEEK

ASSEMBLY

LOT CODE

Tape & Reel Information

Dimensions in millimeters and inches

TRR

FEED DIRECT ION

TRL

F EED D IRECTION

10.90 (0.429)

10.70 (0.421) 16.10 (0.634)

15.90 (0.626)

1.75 (0. 069)

1.25 (0. 049)

1.85 (0.073)

1.65 (0.065)

4.10 (0.161)

3.90 (0.153)

1.60 (0.063)

1.50 (0.059)

DIA.

1.60 (0.063)

1.50 (0.059)

DIA.

11.60 (0.457)

11.40 (0.449)

15.42 (0.609)

15.22 (0.601)

4.72 (0. 186)

4.52 (0. 178)

24.30 (0.957)

23.90 (0.941)

0.368 (0.014 5)

0.342 (0.013 5)

360 (1 4.173)

DIA. MAX.

26.40 (1.039)

24.40 (0.961)

13.50 (0.532)

12.80 (0.504)DIA.

60 (2.3 62)

DIA. MIN.

SMD- 220 Tape & Reel

When ordering, indica te the part

number, part orientation, and the

quantity . Q uantit ies are in multiples

of 800 pieces per reel for both

TRL and TRR.

(K) (G)

(A)

25TTS..S SAFEIR Series

Bulletin I2117 rev. D 12/98

www.irf.com

Outline Table

(K) (G)

1 (K) Cathode

2 (A) Anode

3 (G) Gate (A)

10.1 6 (0.40)

REF.

8.89 (0.35)

4.57 (0.18)

4.32 (0.17)

0.61 (0.02) MAX.

5.08 (0 .20) REF.

1.32 (0.05)

1.22 (0.05)

6.47 (0.25)

6. 18 (0.24)

93°

REF.

2. 61 (0.10)

2. 32 (0.09)

5.28 (0.21)

4.78 (0.19)

4. 69 ( 0.18)

4.20 (0.16)

0.55 (0.02)

0.46 (0.02)

14. 73 (0.58)

15. 49 (0.61)

1.40 (0.055)

1.14 (0.045)

0.93 (0.37)

0. 69 ( 0.27)

2X 11.4 3 (0.45)

17.7 8 (0 .70)

8.89 (0.3 5)

3. 81 (0.15)

2.08 (0.08)

2. 54 ( 0. 10)

MINIMUM RECOMMENDED FO OTPRINT

25 T T S 16 S TRL

Device Code

1524

Ordering Information Table

1- Current Rating, RMS value

2- Circuit Configuration

T = Single Thyristor

3- Package

T = TO-220AC

4- Type of Silicon

S = Converter Grade

5- Voltage code: Code x 100 = VRRM

6- S = TO-220 D2Pak (SMD 220) Version

7- Tape and Reel Option

TRL = Left Reel

TRR = Right Orientation Reel

08 = 800V

12 = 1200V

16 = 1600V

Dimensions in millimeters and inches

(G) 3

(A)

1 (K)

25TTS..S SAFEIR Series

Bulletin I2117 rev. D 12/98

www.irf.com

WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332.

EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408.

IR CANADA: 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801.

IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933.

IR ITALY: Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220.

IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086.

IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630.

IR TAIWAN: 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936.

http://www.irf.com Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice.