Corcom EMI/RFI Filter Product Overview TE Connectivity offers over 300 solutions for EMI/RFI problems associated with susceptibility, as well as compliance with international emissions standards. Corcom filters are available in a wide range of single and 3-phase designs as well as IEC inlet and power entry modules which can combine several functions to reduce cost, space and labor. Solutions are also available for DC applications and applications requiring extremely high performance with feedthrough filters and capacitors for a wide range of applications. TE Connectivity Corcom Filter Products FILTER TYPE POWER LINE FILTERS SERIES B Series K Series Approvals UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE Features General purpose RFI Filters for high impedance load / low current General purpose RFI power line filters for high impedance loads Enhanced differential mode performance K Series RFI line filters * General purpose * Well suited to applications * Higher performance line to line PERFORMANCE DK Series General Purpose * Wide variety of termination options * Meets low leakage current requirements of VDE portable equipment and non-patient medical equipment where pulsed, continuous and/ or intermittent RFI interference is present * EK models meet the very low leakage current requirements for VDE portable equipment and nonpatient care medical equipment * Available with ground line inductor (choke) attenuation than the K Series * E version meets the very low leakage current requirements for VDE portable equipment and nonpatient care medical equipment * V version features same high performance with more cost-effective design ELECTRICAL PARAMETERS Max. voltage 250 VAC 250 VAC 250 VAC Current Ratings 1, 2, 3, 5, 10, 20 or 30A 1, 2, 3, 5, 10, 20, 30, 40 or 60A 1, 3, 6, 10 or 20A Leakage current each Line to Ground @ 120VAC 60Hz / 250VAC 50Hz VB Models: .4 mA / .7 mA EB Models: .21 mA / .36 mA VK Models: .5 mA / 1.0 mA EK Models: .21 mA / .36 mA VDK Models: .4 mA / .7 mA EDK Models: .22 mA / .38 mA Electrical Setup Single stage Single stage Dual stage Mounting features Screw mounting Screw mounting (flange or panel) Screw mounting Termination inputs .25 [6.3] spade terminals, 8-32 terminal bolt & nut or wire leads .25 [6.3] spade terminals, 8-32 terminal bolt & nut, wire leads or IEC 60320-1 C14 or C20 .25 [6.3] spade terminals, 8-32 terminal bolt & nut or wire leads Termination outputs .25 [6.3] spade terminals, 8-32 terminal bolt & nut or wire leads .25 [6.3] spade terminals, 8-32 terminal bolt & nut or wire leads .25 [6.3] spade terminals, 8-32 terminal bolt & nut or wire leads Wide band RFI suppression for applications requiring low attenuation including: Universal filter for applications requiring mid-range attenuation including: Universal filter for applications requiring improved attenuation including: * HVAC * TV / Audio / Video * TV / Audio / Video * TV / Audio / Video * Computing & accessories * Computing & accessories * Computing & accessories * Home appliances * Home appliances * Home appliances * Medical equipment * Medical equipment * Medical equipment * Gaming machines * Gaming machines * Battery charging systems * Exercise equipment * Exercise equipment * Exercise equipment * Test measurement equipment MECHANICAL PARAMETERS TYPICAL APPLICATIONS corcom.com TE Connectivity Corcom Filter Products POWER LINE FILTERS (Continued) R Series EBP, EDP, EOP Series WG Series General Purpose X, Y & Z Series Wide Range Performance UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE Two-stage general purpose RFI power line filter PC board mountable general purpose RFI filters High performance, low cost filter ideal for appliance equipment * Dual T section RFI filter provides * General purpose * Cost effective Chassis or PC Board Mountable Power Line Filters for Emission Control * Low leakage current * Tubular design * Cost-effective * WGD, WGE and WGF versions premium performance * Well suited for low impedance loads where noisy RFI environments are present * Controls pulsed, continuous and/or intermittent interference * ER model offers low leakage current without deterioration of insertion loss * Compact size * EDP model features enhanced differential mode performance * EBP model features compact size designed to comply with leakage current requirements for appliances which may be easily moved from one place to another * Available in a variety of styles (less than 1" square) * Compact chassis or PC board mountable * Three levels of performance * Complete filtering solution in minimal size * X Series for FCC Part 15J, Class B * Y Series for EN55022, Level A * Z Series for EN55022, Level B * Medical version available in the HZ Series 250 VAC 250 VAC 250 VAC 250 VAC 1, 2, 3, 5, 10 or 20A 1, 3, 6 or 10A 16A 1, 2, 3, 4 or 6A VR Models: .4 mA / .7 mA ER Models: .21 mA / .36 mA EDP/EOP Models: .22 mA / .38 mA EBP Models: .13 mA / .21 mA A, B & C Models: .76 mA / 1.27 mA D, E & F Models: .10 mA / .20 mA .3 mA / .5 mA Single stage Single stage Single stage Single stage Screw mounting (flange or panel) PC board pins Screw-in mounting stud Screw mount or PC board pins .25 [6.3] spade terminals, 8-32 terminal bolt & nut, wire leads or IEC 60320-1 C14 PCB pins .025 [.635] square .25 [6.3] spade terminals, wire leads or RAST 5 header interface .25 [6.3] spade terminals or PCB pins .065[1.65] diagonal .25 [6.3] spade terminals, 8-32 terminal bolt & nut or wire leads PCB pins .025 [.635] square .25 [6.3] spade terminals, wire leads or RAST 5 header interface .25 [6.3] spade terminals or PCB pins .065[1.65] diagonal Universal filter for applications with low impedance loads including: Designed for PCB mounting for a wide range of applications including: * Motors * Gaming machines Specially designed for the white goods / appliance market. Offers wide band RFI suppression for many applications including: * Semiconductor actuators * Cash terminals * Washing machines / dryers * Home appliances * Office equipment * Dishwashers * Gaming machines * Small consumer electronics * Refrigerators & freezers RFI filter designed to bring most digital equipment (including those with switching power supplies) into compliance with EN55022, Level A or B and FCC Part 15J, Class B conducted emission limits. Ideal for all applications with limited space including: * Exercise equipment * TV / Audio / Video * Coffee Machines * Security systems * Computing & accessories * Hand held appliances & tools * Industrial equipment & controls corcom.com * Ovens & ranges * Switching Power Supplies * Industrial single phase applications TE Connectivity Corcom Filter Products FILTER TYPE POWER LINE FILTERS (Continued) SERIES S, V & W Series G & N Series Approvals UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE Features Multipurpose Power Line RFI Filter for Emission Control High Performance RFI Filters for Switching Power Supplies For increased filtering requirements High Performance B Series RFI Line Filters PERFORMANCE Wide Range Performance * Effective when used to control emissions in equipment using SCR and T2L circuits * S & W Series designed for high impedance frequencies * V Series designed for low impedance frequencies * Medical version available in the ELECTRICAL PARAMETERS SB Series MV Series * Designed to provide excellent attenuation for most digital electronics equipment and help comply with EN55022 Level A and FCC Part 15J Class B * Enhanced performance version of our popular B Series of RFI line filters * Small size with enhanced performance * Broad frequency range of * 30A version half the size of other * Size and cost-effective solution * Low leakage version available performance from 20kHz to 30MHz 30A filters Max. voltage 250 VAC 250 VAC 250 VAC Current Ratings 3, 6, 10, 20 & 60A (60A S Series only) 6 & 10A 6, 10, 20 & 30A Leakage current each Line to Ground @ 120VAC 60Hz / 250VAC 50Hz .4 mA / .7 mA (S Series 3-10A) .75 mA / 1.25 mA (S Series 60A) .5 mA / .82 mA (V & W Series) .07 mA / .13 mA (MV Series) .3 mA / .5 mA (EG models) 1.2 mA / 2.0 mA (VG & N models) .75 mA / 1.25 mA (VSB models) .22 mA / .36 mA (ESB models) Electrical Setup Dual stage Single stage (6A models) Dual stage (10A models) Single stage Mounting features Screw mounting Screw mounting Screw mounting Termination inputs .25 [6.3] spade terminals or terminal bolt & nut .25 [6.3] spade terminals .25 [6.3] spade terminals or 8-32 terminal bolt & nut Termination outputs .25 [6.3] spade terminals or terminal bolt & nut .25 [6.3] spade terminals .25 [6.3] spade terminals or 8-32 terminal bolt & nut Multipurpose power line RFI filter for emission control and high noise industrial environments and applications that require compliance with FCC Part 15, Subpart J and EN55022, Level A, down to 150kHz including: Specifically designed for most digital electronic equipment requiring a high range of symmetric and asymmetric attenuation including: Wide band RFI suppression for applications requiring enhanced performance including: * Consumer electronics * Small machine tools * Small machine tools * Industrial single-phase applications MECHANICAL PARAMETERS TYPICAL APPLICATIONS * Food service equipment * Measurement & Instrumentation corcom.com * Switching power supplies * Motor drives * TV / Audio / Video * Computing & accessories * Home appliances * Medical equipment * Gaming machines * Exercise equipment TE Connectivity Corcom Filter Products POWER LINE FILTERS (Continued) SK Series RK Series UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE High Performance K Series RFI Line Filters for SMPS Emission Control High Performance Compact Power Line Filter Compact and Cost-effective Dual Stage RFI Power Line Filters Single and 2-phase RFI Filters for Industrial Applications * Designed to reduce conducted * Compact * Compact dual stage filter series * Excellent performance for * Single stage * Current rating up to 30A * Significant differential mode * High differential mode attenuation * Designed for single or two-phase * Suitable for industrial machinery * High common mode performance * Available touch safe terminals * Low input leakage current makes it * Ideal for switching mode power 250 VAC 250 VAC 250 VAC 500 VAC MAX. Line to Ground 3, 6, 10, 20, 30 & 40A 3, 6, 10, 15 & 20A 3, 6, 10, 15, 20 & 30A 1, 6, 16, 35, 50 & 80A .4 mA / .7 mA (3-10A VSK models) .21 mA / .36 mA (3-10A ESK models) .75 mA / 1.25 mA (3-10A VSK models) .3 mA / .5 mA (3-10A ESK models) .16 mA / .26 mA .21 mA / .43 mA (3-10A models) .73 mA / 1.52 mA (15-30A models) .06 mA / 1.2 mA* (1 & 6A models) 1.7 mA / 3.2 mA* (16 - 50A models) 5.2 mA / 9.9 mA* (80A model) Single stage Single stage Dual stage Dual stage (6-80A models) Dual stage + ground choke (1A only) Screw mounting (flange or panel) Screw mounting Screw mounting Screw mounting .25 [6.3] spade terminals, terminal bolt & nut, wire leads or IEC 60320-1 C14 .25 [6.3] spade terminals .25 [6.3] spade terminals, 8-32 terminal bolt & nut or wire leads .25 [6.3] spade terminals or DIN type terminal block and bolt/nut .25 [6.3] spade terminals, terminal bolt & nut or wire leads .25 [6.3] spade terminals .25 [6.3] spade terminals, 8-32 terminal bolt & nut or wire leads .25 [6.3] spade terminals, wire leads or DIN type terminal block and bolt/nut Universal filter for consumer electronic applications requiring a premium range of attenuation including: Wide band RFI suppression for applications requiring high attenuation level including: Wide band RFI suppression for applications requiring high attenuation levels including: * Consumer electronics * Consumer electronics * Industrial machinery equipment * Single phase industrial equipment Wide band RFI filter for small to medium sized industrial equipment, power converters and variable speed motors. Provides suppression of industrial 2-phase applications with high RFI emissions including: * Small machine tools * Inverters * Transportation vehicles * Home appliances * Switching power supplies * Site applications EMC Series IK Series Wide Range Performance noise to acceptable limits for equipment that must comply with FCC / EN specifications * Utilizes significantly higher element values than the general purpose K Series * ESK6C and VSK6C incorporate separate ground circuit inductor * TV / Audio / Video * Computing & accessories * Home appliances * Medical equipment * Industrial equipment & controls * Exercise equipment corcom.com performance suitable for portable equipment in the lower frequency range supplies applications with high interference levels applications provide easy connections and prevent inadvertent contact * 1A @ 289 VAC, 16-80A @ 277 VAC 50Hz * Power supplies * Small construction machinery TE Connectivity Corcom Filter Products FILTER TYPE POWER LINE FILTERS (Continued) SERIES Q Series FC Series Approvals UL / CSA / VDE UL / CSA / VDE * UL / CSA / VDE Features Highest Performance RFI Filters for Switching Power Supplies Single Phase Power Line Filter for Frequency Converters Dual Stage RFI Power Line Filters for Switching Mode Power Supplies * High attenuation for common and * Designed for frequency inverters * Dual stage filter offers high * Effective from 10kHz to 30MHz * Suitable for electronically noisy * Well suited for meeting CISPR 22 A * Protects programmable logic * EP model meets very low leakage PERFORMANCE EP & VP Series Superior Performance differential mode interference * Optimized for attenuation and size * 3 or 6A versions available with IEC inlet * Medical version available in the HQ Series and variable speed motor drives environments controllers from RF noise on the AC power line * Touch safe terminals insertion loss and FCC Part 15J, Class B current requirements * 7 and 12A versions offer optimum package size ELECTRICAL PARAMETERS Max. voltage 250 VAC 250 VAC 250 VAC Current Ratings 3, 6 & 20A 6 & 10A 3, 6, 7, 10, 12 & 20A Leakage current each Line to Ground @ 120VAC 60Hz / 250VAC 50Hz .73 mA / 1.27 mA (3 & 20A VQ models) .22 mA / .38 mA (3 & 20A EQ models) .29 mA / .51 mA (6A EQ models) 3.9 mA / 7.0 mA (B suffix, single stage) 3.8 mA / 6.7 mA (no suffix, dual stage) .73 mA / 1.27 mA (VP models) .21 mA / .36 mA (EP models) Electrical Setup Dual stage Single stage (B suffix) Dual stage (no suffix) Dual stage (medical versions without y-capacitors) Mounting features Screw mounting (flange or panel) Screw mounting Screw mounting (flange or panel) Termination inputs .25 [6.3] spade terminals, wire leads or IEC 60320-1 C14 DIN type terminals .25 [6.3] spade terminals, wire leads, terminal bolt & nut, or IEC 60320-1 C14 Termination outputs .25 [6.3] spade terminals or wire leads DIN type terminals .25 [6.3] spade terminals, wire leads, or terminal bolt & nut Trouble shooter for wide banded RFI suppression of applications with very high RFI emissions including: Wide band RFI suppression of industrial single phase applications with very high RFI emissions including: Wide band attenuation for applications with very high RFI emissions. This filter series offers excellent attenuation for applications such as: MECHANICAL PARAMETERS TYPICAL APPLICATIONS * Consumer electronics * Single phase industrial applications * Switching power supplies with transient currents * Drives with long motor-cables * Variable speed motor drive applications * Single phase industrial applications * Drive motors and controllers * HVAC * VDE approvals for dual stage models up to 36A only corcom.com * Consumer electronics TE Connectivity Corcom Filter Products POWER LINE FILTERS (Continued) T Series AQ Series Superior Performance DC FILTERS FEEDTHROUGH FILTERS DA, DB, DC and DCP Series FFA, FFD, AFC, AFD Series General & High Purpose Superior Performance UL / CSA / VDE UL / CSA UL / CSA / VDE High Performance RFI Power Line Filters for Switching Power Supplies High Frequency Power Line Filter or Power Entry Module DC filters available in a wide variety of versions for DC system RFI issues * High common and differential * DA Series - Compact RFI Line Filter * Superior common-mode and premium differential-mode attenuation * Smaller package sizes than the EP Series * ET models with low leakage current * Medical versions available in the mode performance from 10kHz to 1GHz * Available with an IEC inlet, fuseholder and switch * Suitable for applications where computers are used to process secret or confidential information HT Series with DC Inlet Connection * DB Series - High Current DC Inlet Filter and Connectors * DC Series - General purpose line filters for DC applications up to 125VDC with many options * P Series - adaptable power entry module for DC rated applications AC & DC rated feedthrough filters and capacitors for highest rated performance * FFA (AC rated) & FFD ( DC rated) feedthrough filters * AFC (AC rated) & AFD (DC rated) feedthrough capacitors * Offers high reliability & performance for high frequency applications * Custom versions available 250 VAC 250 VAC 125 VDC (DA, DB) & 80VDC (DC, P) 250 VAC / 130 VDC 3, 6, 10, 15 & 20A 3, 6, 10, 15 & 20A 3, 6, 10 & 15A (DA Series) 60A (DB Series), 3 & 6A (P Series) 15, 30, 60, 100 & 125A (DA Series) 10 to 300A (FFA/AFC/DFC) 10 to 200A (FFD) .3 mA / .5 mA (ET models) .75 mA / 1.2 mA (VT models) 1.2 mA / 2.3 mA (3A models) .7 mA / 1.2 mA (6A models) Single (3-10A) & Dual stage (10-20A) Multi stage Screw mounting Screw mounting (flange or panel) Screw mounting & snap-in Screw mounting .25 [6.3] spade terminals, wire leads, terminal bolt & nut, or IEC 60320-1 C14 Wire leads Spade terminals, PCB pins, wire leads, DA or DCB connector, or terminal bolt & nut Screw terminal .25 [6.3] spade terminals, wire leads, or terminal bolt & nut Wire leads, or IEC 60320-1 C14 Spade terminals, PCB pins, wire leads, DA or DCB connector, or terminal bolt & nut Screw terminal Wide band attenuation for applications with very high RFI emissions including: Ideal filter series for hardened applications where computers are used to process secret or confidential information. * Network routing equipment Universal applications including; * Servers * Servers and routers * Switching equipment * Base stations * Single phase industrial applications * Wireless cabinets * Transportation * Drive motors and controllers * Ethernet hubs * Telecom * Commercial & building equipment * Base stations * MRI rooms * Repeater stations * High current switch mode power (medical versions without y-capacitors) * Consumer electronics * Power supplies for all types of communications equipment corcom.com supplies * Military and aerospace TE Connectivity Corcom Filter Products FILTER TYPE 3-PHASE FILTERS SERIES AYO Series PERFORMANCE General & High Purpose Approvals UL / CSA / VDE UL Recognized UL / CSA / VDE Features Compact Low Current 3-phase WYE RFI Filters 3-phase WYE RFI Power Line Filters High Performance 3-phase RFI Filters for WYE Applications * For 3-phase, four wire, WYE * For 3-phase, four wire, WYE * Common mode and differential * Filters each of the three lines plus * Cost-effective, universal 3-phase * Good for attenuation beginning at * Good attenuation over the applications neutral 100kHz * Space saving design * Low leakage current ELECTRICAL PARAMETERS AYA Series A Series Wide Range Performance applications filters complete frequency range of 10kHz to 30MHz mode suppression from 50kHz to 30MHz * Optional end bell kits available to shield input and output terminals * AYP single stage for lower noise environments * Two different mounting styles * AYT dual stage provides highest available performance Max. voltage 440 VAC Phase to Phase 250 VAC Phase to Neutral / Ground 440 VAC Phase to Phase 250 VAC Phase to Neutral / Ground 440 VAC Phase to Phase 250 VAC Phase to Neutral / Ground Current Ratings 3, 6, 10 & 20A 16, 25, 36, 50, 63 & 100A 20, 30, 45 & 60A 2.0 mA / 3.0 mA (3 - 10A models) 3.5 mA / 5.5 mA (20A models) 1.62 mA / 2.82 mA 1.4 mA / 3.4 mA Single stage Single stage Single stage (AYP Models) & Dual stage (AYT Models) Mounting features Screw mounting (flange or panel) Screw mounting (flange or inserts) Screw mounting (inserts) Termination inputs .25 [6.3] spade terminals Terminal bolt & nut or DIN type terminals Terminal bolt & nut Termination outputs .25 [6.3] spade terminals Terminal bolt & nut or DIN type terminals Terminal bolt & nut Wide band RFI suppression for general purpose 3-phase applications with low to middle RFI emissions including: Universal filter series equipped with 2 different connecting versions including: Wide band RFI suppression for industrial 3-phase applications with high noise emissions (AYP models) and lower noise emissions (ATY models) including: Leakage current each Line to Ground @ 120 VAC 60Hz / 250 VAC 50Hz @ 120 VAC 60Hz / 250 VAC 50Hz @ 120 VAC 60Hz / 250 VAC 50Hz Electrical Setup MECHANICAL PARAMETERS TYPICAL APPLICATIONS * Vending machines * Food service equipment * Gaming machines * Uninterruptible power supplies * Industrial control systems * Large machine tools * Machine tools * Customer machinery * Input filter for motor drives * Small machine tools All models except 16AYA10, 30AYA10, 63AYA6, 63AYA6A and 100AYA6A corcom.com TE Connectivity Corcom Filter Products 3-PHASE FILTERS (Continued) AYC Series FCD Series BCF Series UL Recognized UL & VDE UL Recognized UL Recognized 3-phase Delta External Power Line Filter for Frequency Converters Compact 3-phase Delta RFI Filters for Universal Applications 3-phase WYE RFI Power Line Filters for High Noise Applications High Performance High Current 3-phase Delta RFI Filters * Very high attenuation & high * Compact, light weight book-form * For 3-phase, four wire, WYE * Designed for very high insertion * BS models optimized for very high * Insulated, high quality safety * Very high attenuation with low * BS models suitable for infeed/ * Good common and differential * Ideal for EMC troubleshooting and * Touch safe terminals provide * Touch safe terminals provide * Touch safe terminals provide 480 VAC Phase to Phase 277 VAC Phase to Neutral / Ground 480 VAC Phase to Phase 277 VAC Phase to Neutral / Ground 480 VAC Phase to Phase 277 VAC Phase to Neutral / Ground 480 VAC Phase to Phase 277 VAC Phase to Neutral / Ground 6 to 230A 7 to 130A 16 to 200A 63, 100, 160 & 200A Varies from .26 mA/V for 6A model to 3.25 mA/V for FCD10BS models 30 mA Varies from 62 / 106 mA/V for 16A to 111 / 192 mA/V for 200A model 1.3A (ADT6) 2.6A (63ADT6S) 4.6A (100, 160, 200ADT6S) ADT Series Superior Performance insertion loss insertion loss regenerative (ER) applications easy connections and prevent inadvertent contact for safety design terminals for input and output mode performance below 100kHz easy connections and prevent inadvertent contact for safety @ 277 VAC 50Hz refer to catalog or website for full ratings voltage drop to virtual N to PE/V applications leakage current loss for Delta three phase, three wire applications * Available with common or differential mode coils refurbishing in the field easy connections and prevent inadvertent contact for safety refer to catalog or website for full ratings @ 120 VAC 60Hz / 277 VAC 50Hz @ 277VAC 60Hz Single stage (B suffix models) & Dual stage (blank suffix models) Single stage Single stage Single stage with feedthrough capacitors Screw mounting (flange) Screw mounting (flange) Screw mounting (flange) Screw mounting (flange) DIN type terminals DIN type terminals DIN type terminals Terminal bolt & nut DIN type terminals DIN type terminals DIN type terminals Terminal bolt & nut Wide band RFI suppression for industrial 3-phase applications with very high RFI emissions including: Specially suited for regeneration systems of returning power. Wide banded RFI suppression for industrial 3-phase applications with very high RFI emissions including: Wide band RFI suppression for WYE applications with very high RFI emissions including: Ideal for industrial 3-phase applications with extremely high noise emissions including; * Frequency converters with very * High current motor drives * Machine tools * Elevators & escalators * 3-phase inverters & converters * Frequency converters * Variable speed motor drives * Industrial cabinets * Process automation equipment long motor cables * Machine tools corcom.com * Any difficult application with very difficult noise suppression * Elevators & escalators * Machine tools * Spot-welding machines All models except 200AYC10B TE Connectivity Corcom Filter Products FILTER TYPE POWER ENTRY MODULES SERIES SRB Series PERFORMANCE EEJ Series General Purpose C Series Wide Range Performance Approvals UL / CSA / VDE* UL / CSA / VDE UL / CSA / VDE* Features Minimum Depth, Cost-effective Shielded Power Inlet Filter Cost-effective Medium Performance Power Inlet Filter Including the EJH/EJHS, EJM/EJMS and EJS Models * Two function power entry module * Wide range of capacitor values * Attenuates coupled EMI up to 300MHz * Minimal to low leakage current versions are suitable for patient and non-patient contact medical equipment. * Full range of mounting and termination options including unique vertical and horizontal orientation slide in mounts eliminate the need for mounting hardware * Enhanced two element circuit provides medium attenuation to 30MHz * EJH & EJHS models feature minimal leakage current suitable for patient contact medical applications * EJM & EJMS models feature low leakage current, suitable for most medical applications * EJS models feature EEJ Power Entry Module with Switch combining a DPST switch and an IEC 60320-1 inlet * Snap-in or flange mounting * Available with or without a shielded general purpose or medical grade filter * Two element circuit provides enhanced EMI attenuation * Reduce OEM wiring time with optional pre-connected line and switch terminals performance in snap-in mounting ELECTRICAL PARAMETERS Max. voltage 250 VAC 250 VAC 250 VAC Current Ratings 15A* 1 to 20A 1, 3, 6, 10 or 15A* Leakage current each Line to Ground @ 120VAC 60Hz / 250VAC 50Hz Varies by model from .2 A to .24mA refer to catalog or website for full ratings EEJ/EJS Models: .22 mA / .38 mA EJH Models: 2 A / 5 A EJM Models: .01 mA / .017 mA F models: .25 mA / .40 mA H & non-filtered models: 2 A / 5 A Capacitive, 8 options available values from 33pF to 3300pF Single stage Mounting features Screw and snap-in mounting Screw and snap-in mounting Screw and snap-in mounting Termination inputs IEC 60320-1 C14 IEC 60320-1 C14 or C20 IEC 60320-1 C14 Termination outputs .25 [6.3] spade terminals, wire leads or PC board pins .25 [6.3] spade terminals, wire leads or PC board pins .187 [4.8] spade terminals (non-filtered) or .25 [6.3] spade terminals (Filtered) Electrical Setup Single stage & unfiltered MECHANICAL PARAMETERS Available with or without pre-connected switch terminals TYPICAL APPLICATIONS Wide band RFI suppression for any application with very limited space for the suppression unit including: * TV / Audio / Video * Computing & accessories * Home appliances * Consumer electronics *15A versions are tested by UL to US and Canadian requirements and are VDE approved at 10A corcom.com Wide band RFI suppression for a wide range of applications including: * TV / Audio / Video * Computing & accessories * Home appliances * Medical equipment * Gaming machines * Exercise equipment * Appliances Wide band RFI suppression for applications with limited space including: * TV / Audio / Video * Computing & PC powers supplies * Network & cabeling systems * Medical equipment *15A versions are tested by UL to US and Canadian requirements and are VDE approved at 10A TE Connectivity Corcom Filter Products POWER ENTRY MODULES (Continued) CU Series GG & HG Series P Series EJT Series UL / CSA / VDE* UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE* Compact 1U Height Switched Power Entry Module Smallest Power Entry Module with Metric Fuse Holders Versatile Power Entry Module with Small Footprint High Performance Power Inlet Filter * Designed for popular 1U (1 3/4") * Single or dual fusing * Snap-in or flange mounting * Two element circuit provides basic * Standard IEC 60321-1 C14 power * Available with an internal ground- * Both North American and metric General Purpose height rack mounted equipment * Two function power entry module combining a SPST switch and an IEC 60320-1 inlet * Snap-in, flange and flush mounting * Reduce OEM wiring time with optional pre-connected line and switch terminals attenuation circuit inductor (C versions) to isolate equipment chassis from power line ground at radio frequencies * Multiple termination and mounting styles * Medical version as the HG Series Superior Performance inlet fusing capabilities * Superior EMI filter with IEC 60320-1 inlet * Double three element differential mode circuit attenuates noise up to 1GHz * Up to 15A with IEC 60320-1 C14 * Two voltage selection options * 20A rating with IEC 60320-1 C20 * Optional DPST on/off switch * Spade terminals or wire leads * Filter options for general purpose, medical and high-performance EMI filtering identical to GG with dual fuse only 250 VAC 250 VAC 250 VAC 250 VAC 1, 3, 6, 10 or 15A* 1, 3, 6 & 10A 3, 6 & 10A Filtered, 10A non-filtered 1, 3, 6, 10 or 15A Filtered models: .25 mA / .40 mA Non-filtered models: 2 A / 5 A HG Models: 2 A / 5 A GG Models: .25 mA / .42 mA H & L Models: 2 A / 5 A S & Z Models: .25 mA / .50 mA .21 mA / .36 mA Single stage & unfiltered Single stage Single stage Dual stage Screw and snap-in mounting Screw and snap-in mounting Screw and snap-in mounting Screw and snap-in mounting IEC 60320-1 C14 IEC 60320-1 C14 IEC 60320-1 C14 IEC 60320-1 C14 or C20 .187 [4.8] spade terminals .25 [6.3] spade terminals or wire leads .187 [4.8] spade terminals (standard) or .25 [6.3] spade terminals (L & Z) .25 [6.3] spade terminals or wire leads Available with or without pre-connected switch terminals (medical versions without y-capacitors) Available with or without interconnection block for unfiltered versions Specially designed for 1U height equipment racks and can be used in space limited applications including: Wide band RFI suppression for applications with very limited space including: Wide band RFI suppression in over 8000 configurations for a wide range of applications including: * Telecom * TV / Audio / Video * TV / Audio / Video * Computing * Computing & accessories * Computing & accessories * TV / Audio / Video * Home appliances * Home appliances * Consumer electronics * Medical equipment * Medical equipment * Gaming equipment * Gaming equipment * Fitness equipment * Fitness equipment *15A versions are tested by UL to US and Canadian requirements and are VDE approved at 10A corcom.com * HVAC Specially designer to attenuate noise in the high frequency range up to 1GHz for various electronic applications including: * Plasma & LCD TV's * Computing & accessories * Instrumentation & measurement *15A versions are tested by UL to US and Canadian requirements and are VDE approved at 10A FOR MORE INFORMATION corcom.com TE Technical Support Internet: USA: Canada: Mexico Latin/S. America: Germany: UK: France: Netherlands: China: Center te.com/help +1 (800) 522-6752 +1 (905) 475-6222 +52 (0) 55-1106-0800 +54 (0) 11-4733-2200 +49 (0) 6251-133-1999 +44 (0) 800-267666 +33 (0) 1-3420-8686 +31 (0) 73-6246-999 +86 (0) 400-820-6015 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree te.com (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. All Rights Reserved. 1-1654250-1 CIS JG 08/2011 Corcom, TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this flyer, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this flyer are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: PSJS0SS3A PS00SSS6A PM0S0SS60 PS00XDS6A PSL00DS60 PS00SSBX0 PS00SSS30 PSJS0SS6A PSJSXSS6A PSJS0SBX0 PM00XSH30 PM0SSSS6B PE0SSSS6A PM0SSSS6A PM0SSSSXA PM0SSSS3A PE0SSSS3A PM0SSSS3B PS0SSSS3A PM0S0DS60 PM00XDS3B PM00XDS3A PM00XDSXB PM00XDSXA PM00XDS6B PE00XDS6A PM00XDS6A PM0SXSS3A PM0SXSS3B PM0SXSS6A PM0SXSS6B PM00XSBX0 PS00XSBX0 PM0SXSSXB PM0SXSSXA PSJS0D000 PM000SS30 PM0S0DH3A PM000SSX0 PE0S0DHXA PM0S0DHXB PM0S0DHXA PM000SS60 PSJSXD000 PSCS0SS6A PSCS0SS3A PM0SXSS60 PM0SXSSX0 PM0SXSS30 PE0SXSS30 PM000DSX0 PM000DS30 PM000DS60 PE000DS60 PM00SDH30 PM00SDH60 PM00SDHX0 PS00SDH60 PM0SSDS30 PM0SSDSX0 PE00SD000 PM00SD000 PM0SXDBXB PM0SXDBXA PSJSSD000 PSJ0SS000 PM00XSH3A PM00XSH3B PM00SDS30 PM00SDSX0 PM00XSH6A PM00XSH6B PM00SDS60 PM00XSHXA PM00XSHXB PM000D000 PM0SSDBX0 PSL0SSS30 PM0SXS000 PSL0SSS60 PM000DH60 PM000DHX0 PM000DH30 PM0SXSH30 PE0SXSH30 PE0SXSH60 PSJSSDS60 PM0SXSH60 PM0SXSHX0 PM0SSDH30 PM0SSDHX0 PM0SSDH60 PS0SSDH60 PS0SSDHX0 PM00XSBXA PM00XSBXB PM0SSD000 PE0SXDS3B PM0SXDS6A PM0SXDSXA