REVISIONS PART NO. 13-10-1 RG59 ECN # REV DESCRIPTION - A RELEASED DRAWN DATE Santosh 06/9/07 CHECKD DATE APPRVD DATE Suresh 06/9/07 G. C 21/9/07 Specifications: Bodies Centre Contact Insulation Crimp Ferrule Part to be clean : Brass per JIS-C3604. : Brass per JIS-C3604. : Teflon per ASTM D1457 and ASTM D1710. : Brass per JIS-C2700. and free of burrs. Stripping Dimension Dimensions : Millimetres (Inches) This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2007. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Santosh DATE: 06/09/07 CHECKED BY: DATE: 06/09/07 SIZE DATE: 21/09/07 SCALE: NTS Suresh APPROVED BY: G.Cook A DWG NO. 13-10-1 RG59 M10000576 U.O.M.: mm (Inches) REV ELECTRONIC FILE A 1169728_DWG SHEET: 1 OF 2 REVISIONS PART NO. ECN # REV DESCRIPTION - A RELEASED 13-10-1 RG59 DRAWN DATE Santosh 06/9/07 CHECKD DATE APPRVD DATE Suresh 06/9/07 G. C 21/9/07 Specification Table Number Description Material 1 Body 2 Washer 3 Spring Washer SK-5 4 Washer Brass 5 Gasket Rubber Finish Part Number Brass Nickel 100" Minimum 13-10-1 RG59 None 6 Insulation Teflon 7 Shell Zinc 8 Crimp Ferrule 9 Centre Contact Nickel 100" Minimum Brass Gold http://www.farnell.com http://www.newark.com http://www.cpc.co.uk This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2007. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Santosh DATE: 06/09/07 CHECKED BY: DATE: 06/09/07 SIZE DATE: 21/09/07 SCALE: NTS Suresh APPROVED BY: G.Cook A DWG NO. 13-10-1 RG59 M10000576 U.O.M.: mm (Inches) REV ELECTRONIC FILE A 1169728_DWG SHEET: 2 OF 2