PART NO. ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Santosh 06/9/07 06/9/07 21/9/07Suresh G. C
RELEASED
13-10-1 RG59
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2007.
TOLERANCES: DRAWN BY:
Santosh
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE: 13-10-1 RG59
1169728_DWG
M10000576
06/09/07
DATE: SIZE
SCALE: NTS U.O.M.: mm (Inches) SHEET: 1 OF 2
DWG NO. ELECTRONIC FILE REV
A
06/09/07 A
DATE:
21/09/07
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Dimensions : Millimetres (Inches)
Specifications:
Bodies : Brass per JIS-C3604.
Centre Contact : Brass per JIS-C3604.
Insulation : Teflon per ASTM D1457 and ASTM D1710.
Crimp Ferrule : Brass per JIS-C2700.
Part to be clean and free of burrs. Stripping Dimension
PART NO. ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Santosh 06/9/07 06/9/07 21/9/07Suresh G. C
RELEASED
13-10-1 RG59
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2007.
TOLERANCES: DRAWN BY:
Santosh
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE: 13-10-1 RG59
1169728_DWG
M10000576
06/09/07
DATE: SIZE
SCALE: NTS U.O.M.: mm (Inches) SHEET: 2 OF 2
DWG NO. ELECTRONIC FILE REV
A
06/09/07 A
DATE:
21/09/07
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Specification Table
Number Description Material Finish Part Number
1 Body Brass
Nickel 100µ” Minimum
13-10-1 RG59
2 Washer
3Spring Washer SK-5
4 Washer Brass
5 Gasket Rubber None
6 Insulation Teflon
7 Shell Zinc Nickel 100µ” Minimum
8Crimp Ferrule Brass
9Centre Contact Gold
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
