Supertex inc. 2N6660 N-Channel Enhancement-Mode Vertical DMOS FET Features General Description The Supertex 2N6660 is an enhancement-mode (normallyoff) transistor that utilizes a vertical DMOS structure and Supertex's well-proven silicon-gate manufacturing process. This combination produces a device with the power handling capabilities of bipolar transistors, and the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, this device is free from thermal runaway and thermally-induced secondary breakdown. Free from secondary breakdown Low power drive requirement Ease of paralleling Low CISS and fast switching speeds Excellent thermal stability Integral source-drain diode High input impedance and high gain Hi-Rel processing available Applications Motor controls Converters Amplifiers Switches Power supply circuits Drivers (relays, hammers, solenoids, lamps, memories, displays, bipolar transistors, etc.) Supertex's vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. Ordering Information Device Package BVDSS/BVDGS RDS(ON) ID(ON) (V) (max) () 2N6660 TO-39 60 3.0 1.5 TO-39 package is RoHS compliant (`Green'). Consult factory for die / wafer form part numbers. Refer to Die Specification VF21 for layout and dimensions. (min) (A) Pin Configuration Absolute Maximum Ratings Parameter Value Drain-to-source voltage BVDSS Drain-to-gate voltage BVDGS Gate-to-source voltage 20V Operating and storage temperature GATE SOURCE DRAIN TO-39 -55C to +150C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. (Case : Drain) Product Marking 2N6660 YY = Year Sealed YYWW WW = Week Sealed Package may or may not include the following marks: Si or TO-39 Supertex inc. 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 2N6660 Thermal Characteristics ID Power Dissipation ID Package (continuous) (mA) (pulsed) (A) TO-39 410 3.0 jc @TC = 25OC (W) (OC/W) 6.25 20 (OC/W) IDR (mA) IDRM 125 410 3.0 ja (A) ID (continuous) is limited by max rated Tj. Electrical Characteristics (T = 25C unless otherwise specified) A Sym Parameter Min Typ Max Units BVDSS VGS(th) Drain-to-source breakdown voltage 60 - - V VGS = 0V, ID = 10A Gate threshold voltage 0.8 - 2.0 V VGS = VDS, ID = 1.0mA VGS(th) change with temperature - -3.8 -5.5 mV/OC VGS = VDS, ID = 1.0mA IGSS Gate body leakage current - - 100 nA VGS = 20V, VDS = 0V - - 10 IDSS Zero gate voltage drain current ID(ON) On-state drain current VGS(th) RDS(ON) - - 500 1.5 - - - - 5.0 - - 3.0 170 - - Static drain-to-source on-state resistance GFS Forward transconductance CISS Input capacitance - - 50 COSS Common source output capacitance - - 40 CRSS Reverse transfer capacitance - - 10 t(ON) Turn-on time - - 10 t(OFF) Turn-off time - - 10 VSD Diode forward voltage drop - 1.2 Reverse recovery time - 350 trr Conditions VGS = 0V, VDS = Max rating A VDS = 0.8 Max Rating, VGS = 0V, TA = 125OC A VGS = 10V, VDS = 10V mmho VGS = 5.0V, ID = 0.3A VGS = 10V, ID = 1.0A VDS = 25V, ID = 0.5A pF VGS = 0V, VDS = 24V, f = 1.0MHz ns VDD = 25V, ID = 1.0A, RGEN = 25 - V VGS = 0V, ISD = 1.0A - ns VGS = 0V, ISD = 1.0A Notes: 1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300s pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 10V Pulse Generator INPUT 0V 10% t(ON) td(ON) VDD OUTPUT 0V VDD 90% t(OFF) tr td(OFF) 90% Supertex inc. OUTPUT RGEN tf 10% 10% RL INPUT 90% 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com 2 D.U.T. 2N6660 3-Lead TO-39 Package Outline (N2) D D1 a A Seating Plane 2 1 3 h 2 1 3 b L j k Bottom View Symbol Dimension (inches) MIN NOM MAX 45O NOM 90O NOM Side View A a b D D1 h j k L .240 .190 .016 .350 .315 .009 .028 .029 .500 - - - - - - - - - .260 .210 .021 .370 .335 .125 .034 .040 .560* JEDEC Registration TO-39. * This dimension is not specified in the JEDEC drawing. Drawings not to scale. Supertex Doc. #: DSPD-3TO39N2, Version B052009. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate "product liability indemnification insurance agreement." Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com) Supertex inc. (c)2011 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Doc.# DSFP-2N6660 C031411 3 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com