812 serial Connector Amphenol
Part Number: 842812-xxxx-xxxx
- 812 serial IDC Socket connector can
be used where quick connect and
disconnect capability are required,
Termination is fast and simple by
means of IDC technology, Available in
size from 10 to 64 contacts with or
without mild-in center polarizing key,
Strain relief may be added to reduce
strain on cable when removing
connector.
A. FEATURES & BENEFITS :
♦ MIL-C-83503, BT224, IEC603-13 and BS9525-F0023 compatible.
♦ .100” x .100” ( 2.54mm x 2.54mm ) grid.
♦ One step mass termination with no wire preparation.
♦ Double depth slots for polarization ( except 10 & 14 contact sizes ).
♦ The mold -in CPK ( center polarizing key ) option is available.
♦ The accessories of optional CPK, polarizing plug and strain relief are available.
♦ Selective gold plated contacts.
♦ Various copper alloy options for contact material.
♦ Ribbed cover for correct cable alignment.
♦ Open-end cover for feed-through and daisy-chain application.
♦ CEC ( Close Entry Cover ) to shield the cable end exposure and to prevent any wrong direction
entry.
♦ UL and CSA Approved.
♦ Standard color grey only.
♦ Various packaging options for ease of termination and handling.
♦ Mate with 0.025” square pins male header and Amphenol header of 816, 821 & 822 series
B. SPECIFICATIONS
Physical Characteristics
Insulation Material : glass reinforced polyester, UL flammability rating 94V-0.
Contact Material : Beryllium Copper or Phoshphor Bronze.
Contact Area Plating : Gold over Nickel.
Wire Accomodation : AWG 26 and AWG 28 stranded, or AWG 28 and AWG 30 solid.
Contact Spacing : .100” ( 2.54mm ) grid terminates to .050” ( 1.27mm ) flat ribbon cable.
Electrical Characteristics
Current Rating : 1 Amp.
Contact Resistance : 50 mΩ Max.
Dielectric Withstanding Voltage : 500Vdc Min. at sea level.
812 series Amphenol
Insulation Resistance : 5,000 MΩ Min. at 500Vdc.
Mechanical Characteristics
Durability : a. 500 cycles for 30 microinches gold plated.
b. 250 cycles for 15 microinches gold plated.
c. 50 cycles for gold flash.
Mating Force : 8 oz max. per contact.
Unmating Force : 2 oz min. per contact.
Contact-Body Retention Force : 8 oz min. per contact.
Environmental Characteristics
Humidity : 95% relative humidity at 40 °C for 96 hours.
Operating Temperature : -55 °C to +105 °C
C. APPLICATIONS
♦ OA Equipment
♦ Computer, Peripheral
♦ Testing Equipment
♦ Switching System
♦ Industrial Control
D. ORDERING INFORMATION
812 series Amphenol
Table I
No. of Strain Relief 842-800-1206 DIM A DIM B
Position
Grey Black in ± .004 mm ± .10 in ± .004 mm ± .10
10 -030 -050 0.68 [17.27] 0.40 [10.16]
14 -031 -051 0.88 [22.35] 0.60 [15.24]
16 -032 -052 0.98 [24.89] 0.70 [17.78]
20 -033 -053 1.18 [29.97] 0.90 [22.86]
26 -034 -054 1.48 [37.59] 1.20 [30.48]
30 -040 -060 1.68 [42.67] 1.40 [35.56]
34 -035 -055 1.88 [47.75] 1.60 [40.64]
36 -041 -061 1.98 [50.29] 1.70 [43.18]
40 -036 -056 2.18 [55.37] 1.90 [48.26]
50 -037 -057 2.68 [68.07] 2.40 [60.96]
60 -038 -058 3.18 [80.77] 2.90 [73.66]
64 -039 -059 3.38 [85.85] 3.10 [78.74]
Table II - Options Code
02 - Black, No CPK, Open Cover Packed separately (obsoleted)
03 - Grey, No CPK, Close Cover Packed separately
04 - Grey, Mold-in CPK, Close Cover Packed separately
05 - Black, No CPK, Close Cover Packed separately (obsoleted)
06 - Black, Mold-in CPK, Close Cover Packed separately (obsoleted)
09 - Black, No CPK, Open Cover, Pre-latch (obsoleted)
12 - Grey, No CPK, Open Cover Packed separately
13 - Grey, Mold-in CPK, Open Cover Packed separately
22 - Grey, No CPK, Open Cover, Pre-latch
33 - Grey, Mold-in CPK, Open Cover, Pre-latch
34 - Grey, Mold-in CPK, Close Entry Cover on even side
35 - Grey, Mold-in CPK, Close Entry Cover on odd side
43 - Grey, No CPK, Close Entry Cover on odd side
44 - Grey, No CPK, Close Entry Cover on even side
45 - Black, Mold-in CPK, Open Cover, Pre-latch (obsoleted)
Optional black color socket is dis-continued. Only standard grey is available.
812 series Amphenol
Table III - Plating Code
34 - 30 microinches ( 0.76 microns ) min. gold in mating
area, 100 to 200 microinches ( 2.54 to 5.08 microns )
90/10 tin lead plated in termination area. and 50
microinches ( 1.27 microns ) min. nickel underplated
allover.
18 - 15 microinches ( 0.38 microns ) min. gold in mating
area, 100 to 200 microinches ( 2.54 to 5.08 microns )
90/10 tin lead plated in termination area. and 50
microinches ( 1.27 microns ) min. nickel underplated
allover.
AA - Gold Flash in mating area, 100 to 200 microinches
( 2.54 to 5.08 microns ) 90/10 tin lead plated in
termination area. and 50 microinches ( 1.27 microns )
min. nickel underplated allover.
Title : Part Number :
Amphenol 812 series connector 812 series
