SLCS005S - JUNE 1976 - REVISED OCTOBER 2004 D D D D D D D D - Max Rating . . . 2 V to 36 V - Tested to 30 V . . . Non-V Devices - Tested to 32 V . . . V-Suffix Devices Low Supply-Current Drain Independent of Supply Voltage . . . 0.4 mA Typ Per Comparator Low Input Bias Current . . . 25 nA Typ Low Input Offset Current . . . 3 nA Typ (LM193) Low Input Offset Voltage . . . 2 mV Typ Common-Mode Input Voltage Range Includes Ground Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . 36 V Low Output Saturation Voltage Output Compatible With TTL, MOS, and CMOS LM193 . . . D OR JG PACKAGE LM293 . . . D, DGK, OR P PACKAGE LM293A . . . D OR DGK PACKAGE LM393, LM393A . . . D, DGK, P, PS, OR PW PACKAGE LM2903 . . . D, DGK, P, PS, OR PW PACKAGE (TOP VIEW) 1OUT 1IN- 1IN+ GND 1 8 2 7 3 6 4 5 VCC 2OUT 2IN- 2IN+ LM193 . . . FK PACKAGE (TOP VIEW) NC 1OUT NC VCC NC D Single Supply or Dual Supplies D Wide Range of Supply Voltage NC 1IN- NC 1IN+ NC 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC 2OUT NC 2IN- NC NC GND NC 2IN+ NC description/ordering information 4 These devices consist of two independent voltage comparators that are designed to operate from a NC - No internal connection single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. The LM193 is characterized for operation from -55C to 125C. The LM293 and LM293A are characterized for operation from -25C to 85C. The LM393 and LM393A are characterized for operation from 0C to 70C. The LM2903 is characterized for operation from -40C to 125C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2004, Texas Instruments Incorporated !"# $"%&! '#( '"! ! $#!! $# )# # #* "# '' +,( '"! $!#- '# #!#&, !&"'# #- && $##( $'"! !$& ../00 && $## # ##' "&# )#+# #'( && )# $'"! $'"! $!#- '# #!#&, !&"'# #- && $##( POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SLCS005S - JUNE 1976 - REVISED OCTOBER 2004 description/ordering information (continued) ORDERING INFORMATION TA VIOmax AT 25C PDIP (P) 30 V LM393P Tube of 75 LM393D Reel of 2500 LM393DR Reel of 2000 LM393PSR Tube of 150 LM393PW Reel of 2000 LM393PWR MSOP/VSSOP (DGK) Reel of 2500 LM393DGKR M9_ PDIP (P) Tube of 50 LM393AP LM393AP Tube of 75 LM393AD Reel of 2500 LM393ADR SOP (PS) Reel of 2000 LM393APSR L393A TSSOP (PW) Reel of 2000 LM393APWR MSOP/VSSOP (DGK) Reel of 2500 LM393ADGKR L393A M8_ PDIP (P) Tube of 50 LM293P LM293P Tube of 75 LM293D Reel of 2500 LM293DR Reel of 2500 LM293DGKR Tube of 75 LM293AD Reel of 2500 LM293ADR MSOP/VSSOP (DGK) Reel of 2500 LM293ADGKR MD_ PDIP (P) Tube of 50 LM2903P LM2903P Tube of 75 LM2903D Reel of 2500 LM2903DR SOP (PS) Reel of 2000 LM2903PSR L2903 TSSOP (PW) Reel of 2000 LM2903PWR L2903 MSOP/VSSOP (DGK) Reel of 2500 LM2903DGKR MA_ SOIC (D) Reel of 2500 LM2903VQDR L2903V TSSOP (PW) Reel of 2000 LM2903VQPWR L2903V SOIC (D) Reel of 2500 LM2903AVQDR L2903AV TSSOP (PW) Reel of 2000 LM2903AVQPWR L2903AV CDIP (JG) Tube of 50 LM193JG LM193JG LCCC (FK) Tube of 55 LM193FK LM193FK SOIC (D) Reel of 2500 LM193DR SOP (PS) TSSOP (PW) 0C 0 C to 70 70C C SOIC (D) 2 mV 5 mV 30 V 30 V SOIC (D) MSOP/VSSOP (DGK) -25C -25 C to 85 85C C 2 mV 30 V SOIC (D) SOIC (D) 7 mV 30 V -40C to 125C -55C -55 C to 125 125C C 7 mV 32 V 2 mV 32 V 5 mV 30 V TOP-SIDE MARKING Tube of 50 SOIC (D) 5 mV ORDERABLE PART NUMBER PACKAGE MAX VCC LM393P LM393 L393 L393 LM393A LM293 MC_ LM293A LM2903 LM193 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. The actual top-side marking has one additional character that designates the assembly/test site. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLCS005S - JUNE 1976 - REVISED OCTOBER 2004 symbol (each comparator) IN+ OUT IN- schematic (each comparator) VCC 80-A Current Regulator 10 A 60 A 10 A IN+ 80 A COMPONENT COUNT OUT Epi-FET Diodes Resistors Transistors 1 2 2 30 IN- GND Current values shown are nominal. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Input voltage range, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to 36 V Output voltage, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 V Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA Duration of output short-circuit to ground (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, JA (see Notes 4 and 5): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97C/W DGK package . . . . . . . . . . . . . . . . . . . . . . . . 172C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85C/W PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 95C/W PW package . . . . . . . . . . . . . . . . . . . . . . . . . 149C/W Package thermal impedance, JC (see Notes 6 and 7): FK package . . . . . . . . . . . . . . . . . . . . . . . . . 5.61C/W JG package . . . . . . . . . . . . . . . . . . . . . . . . . 14.5C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to GND. 2. Differential voltages are at IN+, with respect to IN-. 3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction. 4. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. 5. The package thermal impedance is calculated in accordance with JESD 51-7. 6. Maximum power dissipation is a function of TJ(max), JC, and TC. The maximum allowable power dissipation at any allowable case temperature is PD = (TJ(max) - TC)/JC. Operating at the absolute maximum TJ of 150C can affect reliability. 7. The package thermal impedance is calculated in accordance with MIL-STD-883. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SLCS005S - JUNE 1976 - REVISED OCTOBER 2004 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER MIN VCC = 5 V to 30 V, VO = 1.4 V, VIC = VIC(min) 25C VIO Input offset voltage IIO Input offset current VO = 1.4 V Full range IIB Input bias current VO = 1.4 V Full range VICR Common-mode input voltage range IOH High-level output current VOL 2 5 MIN UNIT TYP MAX 2 5 mV 25C Full range VCC = 15 V, VO = 1.4 V to 11.4 V, RL 15 k to VCC VOH = 5 V, VID = 1 V MAX 9 3 25C -25 VID = 1 V Full range Low-level output voltage IOL = 4 mA, VID = -1 V Full range IOL Low-level output current VOL = 1.5 V, VID = -1 V 25C ICC Supply current RL = VCC = 5 V VCC = 30 V Full range 25 5 -100 -25 0 to VCC - 1.5 0 to VCC - 2 0 to VCC - 2 200 50 0.1 150 200 0.1 400 150 700 6 25C V/mV 50 nA 1 A 400 700 6 0.8 1 2.5 nA V 1 25C nA -250 -400 0 to VCC - 1.5 50 50 250 -300 25C VOH = 30 V, 9 100 25C Large-signal differential-voltage amplification TYP Full range 25C AVD LM293 LM393 LM193 TA TEST CONDITIONS mV mA 0.8 1 2.5 mA Full range (MIN or MAX) for LM193 is -55C to 125C, for LM293 is 25C to 85C, and for LM393 is 0C to 70C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage range is VCC+ - 1.5 V, but either or both inputs can go to 30 V without damage. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLCS005S - JUNE 1976 - REVISED OCTOBER 2004 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER TEST CONDITIONS LM293A LM393A TA MIN 25C VIO Input offset voltage VCC = 5 V to 30 V, VO = 1.4 V, VIC = VIC(min) IIO Input offset current VO = 1.4 V Full range IIB Input bias current VO = 1.4 V Full range VICR Common-mode input voltage range MAX 1 2 Full range 4 25C 5 Full range AVD Large-signal differential-voltage amplification VCC = 15 V, VO = 1.4 V to 11.4 V, RL 15 k to VCC IOH High-level output current VOH = 5 V, VOH = 30 V, VID = 1 V VID = 1 V VOL Low-level output voltage IOL = 4 mA, VID = -1 V IOL Low-level output current VOL = 1.5 V, VID = -1 V VCC = 5 V 25C -25 0 to VCC - 1.5 200 0.1 Full range 25C 150 Full range 25C V/mV 50 nA 1 A 400 700 6 nA V 0 to VCC - 2 25C nA -250 -400 50 mV 50 150 25C 25C UNIT TYP mV mA 25C 0.8 1 mA VCC = 30 V Full range 2.5 Full range (MIN or MAX) for LM293A is 25C to 85C, and for LM393A is 0C to 70C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage range is VCC+ - 1.5 V, but either or both inputs can go to 30 V without damage. ICC Supply current RL = POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SLCS005S - JUNE 1976 - REVISED OCTOBER 2004 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted) PARAMETER TA TEST CONDITIONS VCC = 5 V to MAX, VO = 1.4 V, VIC = VIC(min) Full range Input offset current VO = 1.4 V Full range IIB Input bias current VO = 1.4 V VICR Common-mode input voltage range VIO Input offset voltage IIO LM2903 MIN 25C IOH High-level output current MAX 2 7 5 TYP MAX 1 2 UNIT 4 50 5 200 -25 Full range -250 -25 -500 0 to VCC - 1.5 Full range 0 to VCC - 2 0 to VCC - 2 25C 25 25C 0.1 50 150 400 Full range Low-level output voltage IOL = 4 mA, VID = -1 V Full range IOL Low-level output current VOL = 1.5 V, VID = -1 V 25C ICC Supply current RL = VCC = 5 V VCC = MAX Full range 100 V/mV 0.1 50 nA 1 A 150 400 700 6 25C 700 6 0.8 1 nA V 1 25C VOL 25 nA -250 -500 0 to VCC - 1.5 100 50 200 25C VCC = 15 V, VO = 1.4 V to 11.4 V, RL 15 k to VCC VOH = 5 V, VID = 1 V VOH = VCC MAX, VID = 1 V MIN mV 25C Large-signal differential-voltage amplification TYP 15 25C AVD LM2903A mV mA 0.8 2.5 1 2.5 mA Full range (MIN or MAX) for LM2903 is -40C to 125C. All characteristics are measured with zero common-mode input voltage, unless otherwise specified. VCC MAX = 30 V for non-V devices and 32 V for V-suffix devices. The voltage at either input or common-mode should not be allowed to go negative by more than 0.3 V. The upper end of the common-mode voltage range is VCC+ - 1.5 V, but either or both inputs can go to 30 V (32 V for V-suffix devices) without damage. switching characteristics, VCC = 5 V, TA = 25C PARAMETER TEST CONDITIONS LM193 LM293, LM293A LM393, LM393A LM2903 UNIT TYP Response time RL connected to 5 V through 5.1 k, CL = 15 pF, See Note 8 100-mV input step with 5-mV overdrive 1.3 TTL-level input step 0.3 CL includes probe and jig capacitance. NOTE 8: The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V. 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 s PACKAGE OPTION ADDENDUM www.ti.com 1-Dec-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty 5962-9452601Q2A ACTIVE LCCC FK 20 1 TBD 5962-9452601QPA ACTIVE CDIP JG 8 1 TBD JM38510/11202BPA ACTIVE CDIP JG 8 1 LM193DR ACTIVE SOIC D 8 2500 LM193FKB ACTIVE LCCC FK 20 1 TBD Lead/Ball Finish MSL Peak Temp (3) POST-PLATE Level-NC-NC-NC A42 SNPB Level-NC-NC-NC TBD A42 SNPB Level-NC-NC-NC TBD CU NIPDAU Level-1-220C-UNLIM POST-PLATE Level-NC-NC-NC LM193JG ACTIVE CDIP JG 8 1 TBD A42 SNPB Level-NC-NC-NC LM193JGB ACTIVE CDIP JG 8 1 TBD A42 SNPB Level-NC-NC-NC LM2903AVQDR ACTIVE SOIC D 8 2500 Pb-Free (RoHS) CU NIPDAU Level-2-250C-1 YEAR/ Level-1-235C-UNLIM LM2903AVQPWR ACTIVE TSSOP PW 8 2000 TBD CU NIPDAU Level-1-250C-UNLIM LM2903D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903DGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903DGKRG4 ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903DRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM2903PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM2903PSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903PSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903PWG4 ACTIVE TSSOP PW 8 150 CU NIPDAU Level-1-260C-UNLIM LM2903PWLE OBSOLETE TSSOP PW 8 LM2903PWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903PWRE4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM2903PWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Green (RoHS & no Sb/Br) TBD Call TI Call TI LM2903QD NRND SOIC D 8 75 TBD CU NIPDAU Level-1-220C-UNLIM LM2903QDR NRND SOIC D 8 2500 TBD CU NIPDAU Level-1-220C-UNLIM LM2903QP OBSOLETE PDIP P 8 TBD Call TI LM2903VQDR ACTIVE SOIC D 8 Pb-Free CU NIPDAU 2500 Addendum-Page 1 Call TI Level-2-250C-1 YEAR/ PACKAGE OPTION ADDENDUM www.ti.com 1-Dec-2005 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM2903VQPWR ACTIVE TSSOP PW 8 2000 TBD CU NIPDAU Level-1-250C-UNLIM LM293AD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293ADE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293ADG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293ADGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293ADR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293ADRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293ADRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293DGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293DRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM293P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM293PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM393AD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393ADE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393ADG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393ADGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393ADR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393ADRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393ADRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393AP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM393APE4 ACTIVE PDIP P 8 50 Pb-Free CU NIPDAU Level-NC-NC-NC Lead/Ball Finish (RoHS) Addendum-Page 2 MSL Peak Temp (3) Level-1-235C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com 1-Dec-2005 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty LM393APSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393APSRE4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393APWLE OBSOLETE TSSOP PW 8 LM393APWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393APWRE4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393DG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393DGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393DRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM393PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU Level-NC-NC-NC LM393PSLE OBSOLETE SO PS 8 LM393PSR ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393PSRG4 ACTIVE SO PS 8 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393PW ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393PWE4 ACTIVE TSSOP PW 8 150 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM LM393PWLE OBSOLETE TSSOP PW 8 LM393PWR ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) LM393PWRE4 ACTIVE TSSOP PW 8 2000 LM393PWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS & no Sb/Br) Lead/Ball Finish MSL Peak Temp (3) (RoHS) TBD TBD TBD (1) TBD Call TI Call TI Call TI CU NIPDAU Call TI CU NIPDAU Call TI Call TI Call TI Level-1-260C-UNLIM Call TI Level-1-260C-UNLIM The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 1-Dec-2005 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 4 MECHANICAL DATA MCER001A - JANUARY 1995 - REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0-15 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MLCC006B - OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MPDI001A - JANUARY 1995 - REVISED JUNE 1999 P (R-PDIP-T8) PLASTIC DUAL-IN-LINE 0.400 (10,60) 0.355 (9,02) 8 5 0.260 (6,60) 0.240 (6,10) 1 4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.020 (0,51) MIN 0.015 (0,38) Gage Plane 0.200 (5,08) MAX Seating Plane 0.010 (0,25) NOM 0.125 (3,18) MIN 0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.430 (10,92) MAX 0.010 (0,25) M 4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MTSS001C - JANUARY 1995 - REVISED FEBRUARY 1999 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE 14 PINS SHOWN 0,30 0,19 0,65 14 0,10 M 8 0,15 NOM 4,50 4,30 6,60 6,20 Gage Plane 0,25 1 7 0- 8 A 0,75 0,50 Seating Plane 0,15 0,05 1,20 MAX PINS ** 0,10 8 14 16 20 24 28 A MAX 3,10 5,10 5,10 6,60 7,90 9,80 A MIN 2,90 4,90 4,90 6,40 7,70 9,60 DIM 4040064/F 01/97 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-153 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated