PHOTOCOUPLER PS2503-1,-2,-4,PS2503L-1,-2,-4 LOW INPUT CURRENT, HIGH SPEED SWITCHING -NEPOC MULTI PHOTOCOUPLER SERIES Series- DESCRIPTION The PS2503-1, -2, -4 and PS2503L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2503-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2503L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES * High isolation voltage (BV = 5 000 Vr.m.s.) * High-speed switching (tr = 20 s TYP., tf = 30 s TYP.) * Ordering number of tape product: PS2503L-1-E3, E4, F3, F4, PS2503L-2-E3, E4 * Safety standards * UL approved: File No. E72422 (S) * CSA approved: No. CA 101391 APPLICATIONS * Measurement equipment * Programmable logic controller * Telephone/Telegraph Receiver * Power supply Document No. PN10227EJ01V0DS (1st edition) (Previous No. P11304EJ4V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2503-1,-2,-4,PS2503L-1,-2,-4 PACKAGE DIMENSIONS (UNIT : mm) DIP Type PS2503-1 4 9.70.5 3 2 7.62 0 to 15 +0.1 0.25 -0.05 1.250.15 8 1 0.500.10 1.250.15 0.500.10 0.25 M TOP VIEW 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.50.5 1 3.30.5 4.150.4 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 3.50.3 3.30.5 4.150.4 PS2503-2 TOP VIEW 2 3 4 7.62 3.50.3 4.60.5 0 to 15 +0.1 0.25 -0.05 0.25 M 2.54 2.54 PS2503-4 6.50.5 19.80.5 TOP VIEW 16 15 14 13 12 11 10 9 1 2 3.50.3 3.30.5 4.150.4 7.62 0.500.10 1.250.15 2.54 2 0 to 15 +0.1 0.25 -0.05 0.25 M Data Sheet PN10227EJ01V0DS 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector PS2503-1,-2,-4,PS2503L-1,-2,-4 Lead Bending Type PS2503L-2 PS2503L-1 TOP VIEW 0.90.25 9.600.4 0.25 M 1 1.250.15 0.25 M 6 5 2 3 4 0.15 2.54 0.90.25 9.600.4 0.15 PS2503L-4 TOP VIEW 16 15 14 13 12 11 10 9 6.50.5 19.80.5 1.250.15 0.25 M 2.54 0.15 2 3 4 5 6 7 8 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 0.1 +0.1 -0.05 0.25 +0.1 -0.05 1 3.50.3 2.54 7 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 3.50.3 0.1 +0.1 -0.05 3.50.3 0.25 +0.1 -0.05 2 1.250.15 8 6.50.5 6.50.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 TOP VIEW 9.70.5 3 0.1 +0.1 -0.05 4 0.25 +0.1 -0.05 4.60.5 0.90.25 9.600.4 Data Sheet PN10227EJ01V0DS 3 PS2503-1,-2,-4,PS2503L-1,-2,-4 MARKING EXAMPLE PS2503-1 PS2503-2, -4 No. 1 pin Mark No. 1 pin Mark 2503 M 003 M Assembly Lot 0 03 M Standard PKG Made in Japan Made in Taiwan Package Standard PKG Blank 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Country Assembled Type Number Assembly Lot PS2503-2 M 003 Made in Japan Made in Taiwan Blank New PKG New PKG ORDERING INFORMATION (Solder Contains Lead) Part Number PS2503-1 Package 4-pin DIP Packing Style Magazine case 100 pcs Application Part Number PS2503-1 PS2503L-1 PS2503L-1-E3 Embossed Tape 1 000 pcs/reel PS2503L-1-E4 PS2503L-1-F3 Embossed Tape 2 000 pcs/reel PS2503L-1-F4 PS2503-2 8-pin DIP Magazine case 45 pcs PS2503-2 PS2503L-2 PS2503L-2-E3 Embossed Tape 1 000 pcs/reel PS2503L-2-E4 PS2503-4 16-pin DIP Magazine case 20 pcs PS2503-4 PS2503L-4 *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10227EJ01V0DS *1 PS2503-1,-2,-4,PS2503L-1,-2,-4 ORDERING INFORMATION (Pb-Free) Part Number PS2503-1-A Package 4-pin DIP Packing Style Application Part Number Magazine case 100 pcs *1 PS2503-1 PS2503L-1-A PS2503L-1-E3-A Embossed Tape 1 000 pcs/reel PS2503L-1-E4-A PS2503L-1-F3-A Embossed Tape 2 000 pcs/reel PS2503L-1-F4-A PS2503-2-A 8-pin DIP Magazine case 45 pcs PS2503-2 PS2503L-2-A PS2503L-2-E3-A Embossed Tape 1 000 pcs/reel PS2503L-2-E4-A PS2503-4-A 16-pin DIP Magazine case 20 pcs PS2503-4 PS2503L-4-A *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Ratings Parameter Diode Symbol PS2503-2,-4 PS2503L-2,-4 Unit Reverse Voltage VR 6 V Forward Current (DC) IF 80 mA Power Dissipation Derating Power Dissipation Peak Forward Current Transistor PS2503-1, PS2503L-1 *1 PD/C 1.5 1.2 mW/C PD 150 120 mW/ch IFP 1 A Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 0.6 V IC 30 mA/ch Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 PC/C 1.5 1.2 mW/C PC 150 120 mW/ch BV 5 000 Vr.m.s. Operating Ambient Temperature TA -55 to +100 C Storage Temperature Tstg -55 to +150 C *1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output Data Sheet PN10227EJ01V0DS 5 PS2503-1,-2,-4,PS2503L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Transistor Symbol Conditions Forward Voltage VF IF = 1 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz ICEO VCE = 40 V, IF = 0 mA CTR IF = 1 mA, VCE = 5 V Collector to Emitter Dark MIN. TYP. MAX. Unit 1.1 1.3 V 5 A 50 pF 100 nA 400 % 0.25 V Current Coupled Current Transfer Ratio 100 200 *1 (IC/IF) Collector Saturation VCE(sat) IF = 1 mA, IC = 0.2 mA Voltage VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.5 pF *2 tr VCC = 5 V, IF = 1 mA, RL = 10 k 20 s *2 Fall Time tf 30 *1 CTR rank (only PS2503-1, PS2503L-1) K : 200 to 400 (%) L : 150 to 300 (%) M : 100 to 200 (%) *2 Test circuit for switching time Pulse Input IF VCC PW = 100 s Duty Cycle = 1/10 50 6 RI-O Rise Time 10 11 Isolation Resistance VOUT RL = 10 k Data Sheet PN10227EJ01V0DS PS2503-1,-2,-4,PS2503L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 150 PS2503-1 PS2503L-1 100 PS2503-2 PS2503L-2 PS2503-4 PS2503L-4 1.5 mW/C 50 1.2 mW/C 0 25 50 100 75 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 125 150 PS2503-2 PS2503L-2 PS2503-4 PS2503L-4 1.5 mW/C 50 1.2 mW/C 0 150 25 75 50 100 150 12 50 Collector Current IC (mA) 10 4 mA 5 mA TA = +100 C +60 C +25 C 5 0 C -25 C -55 C 1 0.5 10 3 mA 8 2 mA 6 1.5 mA 4 1 mA 0.8 mA IF = 0.6 mA 2 0.1 0.8 0.9 1.0 1.1 1.2 1.3 1.4 0 1.5 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 30 100 10 mA 50 VCE = 40 V 30 V 20 V 10 V 10 Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 125 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 0.7 100 Ambient Temperature TA (C) Ambient Temperature TA (C) Forward Current IF (mA) PS2503-1 PS2503L-1 100 5.0 1.0 0.3 -25 0 25 50 75 100 10 5 mA 5 2 mA 1 mA IF = 0.8 mA 1 0.5 0.1 0 Ambient Temperature TA (C) 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) Data Sheet PN10227EJ01V0DS 7 PS2503-1,-2,-4,PS2503L-1,-2,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE CURRENT TRANSFER RATIO vs. FORWARD CURRENT Normalized Current Transfer Ratio CTR 400 Current Transfer Ratio CTR (%) 1.4 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 C, IF = 1 mA, VCE = 5 V 0.2 0 -30 25 0 50 75 VCE = 5 V 300 200 Sample A B C 100 0 0.3 0.5 100 CTR = 290 %, VCC = 5 V, IF = 1 mA, RL = 10 k 100 50 tf ts tr td 50 Switching Time t ( s) Switching Time t ( s) 500 5 50 SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. AMBIENT TEMPERATURE 10 10 Forward Current IF (mA) Ambient Temperature TA (C) 100 5 1 tr 10 5 td tf IF = 1 mA, VCC = 5 V, CTR = 209 %, 1 ts VCC IF 0.5 VO 50 1 -50 -25 0 25 0.1 100 75 50 Ambient Temperature TA (C) 500 1 k 100 5 k 10 k RL 50 k100 k Load Resistance RL () LONG TERM CTR DEGRADATION FREQUENCY RESPONSE 1.2 0 -3.0 -6.0 -9.0 1 k RL = 5.6 k 300 -12.0 0.6 8 IF = 5 mA TA = 60C 0.4 1k 10 k 100 k 1M 0 Frequency f (Hz) Remark IF = 5 mA TA = 25C 0.8 0.2 -15.0 100 1.0 CTR (Relative Value) Normalized Gain GV VCC = 5 V, CTR = 209 % 102 103 Time (Hr) The graphs indicate nominal characteristics. Data Sheet PN10227EJ01V0DS 104 105 PS2503-1,-2,-4,PS2503L-1,-2,-4 TAPING SPECIFICATIONS (UNIT : mm) 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2503L-1-E3 PS2503L-1-E4 Outline and Dimensions (Reel) 2.00.5 21.00.8 80.01.0 R 1.0 2542.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel Data Sheet PN10227EJ01V0DS 15.9 to 19.4 Outer edge of flange 9 PS2503-1,-2,-4,PS2503L-1,-2,-4 1.550.1 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 5.30.1 8.00.1 0.4 Tape Direction PS2503L-1-F3 PS2503L-1-F4 Outline and Dimensions (Reel) 2.00.5 21.00.8 1001.0 R 1.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 2 000 pcs/reel 10 Data Sheet PN10227EJ01V0DS 15.9 to 19.4 Outer edge of flange PS2503-1,-2,-4,PS2503L-1,-2,-4 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 10.40.1 1.550.1 12.00.1 0.3 Tape Direction PS2503L-2-E4 PS2503L-2-E3 Outline and Dimensions (Reel) R 1.0 1001.0 2.00.5 13.00.2 3302.0 2.00.5 21.00.8 17.51.0 21.51.0 Packing: 1 000 pcs/reel Data Sheet PN10227EJ01V0DS 15.9 to 19.4 Outer edge of flange 11 PS2503-1,-2,-4,PS2503L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Three * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One (Allowed to be dipped in solder including plastic mold portion.) * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. 12 Data Sheet PN10227EJ01V0DS PS2503-1,-2,-4,PS2503L-1,-2,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10227EJ01V0DS 13 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.