Document Number: 26502 To contact us: RFI@vishay.com www.vishay.com
Revision: 11-Jun-07 25
F1772-2200
Vishay Roederstein
AC-Capacitors, Suppression Capacitors
Class X2 AC 275 V (MKT)
Dimensions in mm
MAXIMUM PULSE RISE TIME: (du/dt) in V/µs
RATED VOLTAGE:
AC 275 V, 50/60 Hz
PERMISSIBLE DC VOLTAGE:
DC 630 V
TERMINALS:
Radial tinned copper wire
COATING:
Plastic case, epoxy resin sealed, flame retardant UL 94V-0
CLIMATIC TESTING CLASS ACC. TO EN 60068-1:
40/100/56
CAPACITANCE RANGE:
E12 series 0.01 µFX2 - 2.2 µFX2
E12 values on request
FURTHER TECHNICAL DATA:
See page 21 (Document No 26504)
LEAD LENGTH
X (mm)
ORDERING CODE**
4-1 F1772-. . .-2204/2264
6-1 F1772-. . .-2200/2260
15-1 F1772-. . .-2015/2265
30+5 F1772-. . .-2230/2263
RATED
VOLTAGE
PITCH (mm)
15.0 22.5 27.5 37.5
AC 275 V 200 150 100 100
W
H
X
± 0.4
L
pcm ± 0.4 Ø 0.8
Dielectric
Electrode
Center margin
Free margin
FEATURES:
Product is completely lead (Pb)-free
Product is RoHS compliant
CAPACITANCE TOLERANCE:
Standard: ± 20 %
DISSIPATION FACTOR TANδ:
< 1 % measured at 1 kHz
INSULATION RESISTANCE: FOR C 0.33 µF:
30 GΩ average value
15 GΩ minimum value
TIME CONSTANT FOR C > 0.33 µF:
10 000 sec. average value
5000 sec. minimum value
TEST VOLTAGE:
(Electrode/electrode): DC 2150 V/2 sec.
REFERENCE STANDARDS:
EN 132 400, 1994
EN 60068-1
IEC 60384-14/2, 1993
UL 1283
UL 1414
CSA 22.2 No. 8-M 86
CSA 22.2 No. 1-M 90
DIELECTRIC:
Polyester film
ELECTRODES:
Metal evaporated
CONSTRUCTION:
Metallized film capacitor
Internal series connection
Between interconnected terminations and case (foil method):
AC 2500 V for 2 sec. at 25 °C.
Impedance (Z) as a function of frequency (f) at Ta = 20 °C
(average). Measurement with lead length 6 mm.
2.2 μF
1.5 μF
0.68 μF
0.33 μF
0.15 μF
0.068 μF0.047 μF
0.015 μF
0.01 μF
1 μF
0.47 μF
0.22 μF
0.1 μF
0.033 μF
0.022 μF
10
1
0.01 0.05 1.0 5.0 10 50 100
10
0
10
-1
10
-2
10
-3
0.1 0.5
Z [Ω]
f[MHz]
RoHS
COMPLIANT
Pb-free
e3
www.vishay.com To contact us: RFI@vishay.com Document Number: 26502
26 Revision: 11-Jun-07
F1772-2200
Vishay Roederstein AC-Capacitors, Suppression Capacitors
Class X2 AC 275 V (MKT)
APPROVALS
Inbuilt discharging resistor on request (with larger case dimensions).
* Further information about packaging quantities with different lead length and/or taped versions.
See page 16 (Document No 27608 Packing Quantities). Use Box No. as reference
** These capacitors can be delivered on continuous tape and reel - see page 14/15 (Document Number 27622).
The ordering code is F1772-. . .-2290 at H = 16.5 mm
F1772-. . .-2291 at H = 18.5 mm
F1772-. . .-2960 at H = 16.5 mm
F1772-. . .-2961 at H = 18.5 mm
COUNTRY SPECIFICATION ELECTRICAL VALUES APPROVAL REFERENCE APPROVAL MARK
U.S.A.
(for AC 250 V)
UL 1283
UL 1414
0.01 - 2.2 µFX
0.01 - 1.0 µFX
E 76297
E 100682
Canada
(for AC 250 V)
C 22.2 No. 8-M 1986
C 22.2 No. 1-M 1994
0.01 - 2.2 µFX
0.01 - 0.82 µFX
LR 64546
LR 64546-8
CB TEST-CERTIFICATE (for AC 275 V) 0.01 - 2.2 µFX2 DE 1-8790
Germany
EN 132 400; 1999-06
IEC 60384-14, 2nd edition;
1993-07, Table II + A1: 1995-06
0.01 - 2.2 µFX2 40005120
This approval mark together with the CB-Certificate replace all national approval marks of the following countries
(they have already signed the CB-Agreement):
Austria Belgium Denmark Finland Sweden
France Germany Ireland Italy Switzerland
Netherlands Israel Portugal Spain Great Britain
Japan Norway China Poland Czech. Republic
Singapore Rep. of Korea Hungary Iceland Slovenia
CAPACITANCE TOL.
(%)
PITCH
(mm)
BOX
NO.
DIMENSIONS
W x H x L (mm)
(+ 0.2/- 0.4 mm)
WEIGHT
LEAD LENGTH
6-1 mm
(g)
QUANTITY
PAC KAGE
LEAD
LENGTH
< = 6-1 mm
(pcs)**
ORDERING CODE**
0.01 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 750 F1772-310-22 . .
0.015 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 750 F1772-315-22 . .
0.022 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 750 F1772-322-22 . .
0.033 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 750 F1772-333-22 . .
0.047 µFX2 ± 20 15.0 05 5.3 x 10.3 x 17.8 1.4 750 F1772-347-22 . .
0.068 µFX2 ± 20 15.0 49 6.0 x 12.0 x 17.9 2.0 600 F1772-368-22 . .
0.1 µFX2 ± 20 15.0 49 6.0 x 12.0 x 17.9 2.0 600 F1772-410-22 . .
0.15 µFX2 ± 20 22.5 09 6.3 x 14.3 x 26.3 3.3 260 F1772-415-22 . .
0.15 µFX2 ± 20 15.0 08 8.3 x 14.3 x 17.8 2.7 325 F1772-415-226 .
0.22 µFX2 ± 20 22.5 11 7.3 x 15.3 x 26.2 4.1 235 F1772-422-22 . .
0.22 µFX2 ± 20 15.0 28 8.3 x 17.3 x 17.8 3.5 300 F1772-422-226 .
0.33 µFX2 ± 20 22.5 01 8.8 x 16.8 x 26.3 5.3 190 F1772-433-22 . .
0.33 µFX2 ± 20 15.0 36 13.3 x 22.3 x 17.8 7.1 185 F1772-433-226 .
0.47 µFX2 ± 20 27.5 29 8.8 x 18.3 x 31.3 6.8 160 F1772-447-22 . .
0.47 µFX2 ± 20 22.5 13 10.3 x 18.3 x 26.3 6.7 170 F1772-447-226 .
0.68 µFX2 ± 20 27.5 14 11.0 x 20.3 x 31.3 12.9 125 F1772-468-22 . .
0.68 µFX2 ± 20 22.5 38 15.3 x 26.3 x 26.3 14.3 110 F1772-468-226 .
1.0 µFX2 ± 20 27.5 18 14.5 x 24.3 x 31.3 15.0 100 F1772-510-22 . .
1.0 µFX2 ± 20 22.5 38 15.3 x 26.3 x 26.3 14.3 110 F1772-510-226 .
1.5 µFX2 ± 20 37.5 16 14.0 x 24.3 x 41.3 18.9 80 F1772-515-22 . .
1.5 µFX2 ± 20 27.5 17 16.0 x 29.3 x 31.3 20.0 85 F1772-515-226 .
2.2 µFX2 ± 20 37.5 19 15.5 x 28.3 x 41.3 24.0 70 F1772-522-22 . .
2.2 µFX2 ± 20 27.5 41 19.5 x 34.8 x 31.3 28.0 70 F1772-522-226 .
10
F1772-2200
AC-Capacitors, Suppression Capacitors
Class X2 AC 275 V (MKT) Vishay Roederstein
Document Number: 26502 To contact us: RFI@vishay.com www.vishay.com
Revision: 11-Jun-07 27
APPLICATION NOTES
For X2 electromagnetic interference suppression in across the line applications (50/60 Hz) with a maximum mains voltage of
275 V (AC).
These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
These capacitors can be used for series impedance application in case safety approvals are requested.
The maximum ambient temperature must not exceed 100 °C.
Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC)
and divided by the applied voltage.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.