2600 series Illuminated and non-illuminated rocker switches Distinctive features and specifications Three rocker shapes : plain, V-shaped or concave Various rocker colours Frame with protection guard on 2600LP models UL, CSA, VDE and NF (EN 61058-1) approved ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load and approved ratings : see table below. * Initial contact resistance : 10m max. at 1A 2VDC * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.500 Vrms 50 Hz min. between terminals 3.000 Vrms 50 Hz min. between terminals and metal panel * Electrical life : 10.000 cycles at full load APPROVED RATINGS FUNCTIONS DIRECT CURRENT CSA UL VDE NF CSA 22-2 UL 1054 EN 61058-1 EN 61058-1 ON - OFF ON - ON 1/6 HP 125VAC 16A 125VAC 16A 250VAC 1/3 HP 250VAC 1/6 HP 125VAC 16A 125VAC 16A 250VAC 1/3 HP 250VAC 10(4)A 250VAC T 85/55 ON - OFF - ON 10A 125VAC 10A 250VAC 1/6 HP 125/250VAC 10A 125VAC 10A 250VAC 1/6 HP 125/250VAC ON - ON - ON - OTHERS 10A 125VAC 10A 250VAC 1/6 HP 250VAC MATERIALS * Case : melamine/polyester * Frame : polyamide * Actuator : polyamide * Contacts : A : silver C : copper, silver plated 24 VDC 12 VDC - 10A 15A L I option 10(4)A 250VAC L I option 10(4)A 250VAC 8A 10A - - - 5A 8A - L I option 10(4)A 250VAC L I option 10(4)A 250VAC 8A 10A GENERAL SPECIFICATIONS * Panel thickness : 0,8 mm to 4 mm (.031 to .157) * Operating temperature : - silver contacts (A) : -20C to +125C - silver plated contacts (C) : -10C to +55C AGENCY APPROVALS EN 61058-1 EN 61058-1 Availability : consult factory for details of approved models. Marking : approved models are standard marked. APEM www.apem.com D-49 D 2600 series Illuminated and non-illuminated rocker switches Overview 26 Electrical functions SERIES 1 4 5 6 7 8 9 ON ON MOM ON MOM ON ON Frame type OFF ON ON ON ON OFF MOM OFF MOM OFF ON LH Plain LP With protection guard double pole only Number of poles D 3 4 Special contact Single pole Double pole (none) Standard Terminals (none) Screw + clamp /2 Solder lugs /quick-connect /3 Normalized quick-connect ABOUT THIS SERIES On the following pages, you will find successively : - model structure of switches - options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Sealing boot U2150 available to protect the switches against dust and water. See section H. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. D-50 www.apem.com APEM 2600 series Illuminated and non-illuminated rocker switches Overview Contact materials Rocker shapes A Silver Silver cadmium oxide (if combined with S) C Copper, silver plated (functions 1, 6 and 9 only) 1 2 3 Rocker marking Plain V-shaped Concave Black 00 01 07 08 White 00 21 27 28 Illuminated window /3 /6 (none) O -- O I ON OFF With green, use fluorescent lamp only. Complete table at the end of the series. Frame colours 1 1/4 2 4 7/1 8 B E blue dark blue black (standard) grey white chrome plated light brown dark brown Rocker colours Illuminated rocker (without window) 0 Without rocker 1 blue 3 green 5 yellow 6 red 7/1 white 9 orange With green or blue rocker, use fluorescent lamp only. Non-illuminated rocker or rocker with illum. window* 0 Without rocker 02 light brown 04 dark brown 03 beige 10 blue 14 dark blue 20 black * 30 green * 40 grey 50 yellow 60 red * 70 white 90 orange green red Lamps L0 L6V L12V L24V L110V L110V1 L110V3 L220V L220V1 L220V3 L380V L380V1 L380V3 D Without lamp 6V filament lamp 12V filament lamp 24V filament lamp 110VAC neon lamp 110VAC blue fuor. lamp 110VAC green fuor. lamp 220VAC neon lamp 220VAC blue fuor. lamp 220VAC green fuor. lamp 380VAC neon lamp 380VAC blue fuor. lamp 380VAC green fuor. lamp L I option LI EN 61058-1 approved version, without lamp (3 position switches) Packaging unit : 20 pieces per type and colour. APEM www.apem.com D-51 2600 series Illuminated and non-illuminated rocker switches I II * Model 2600LP with protection guard * 1 and 2 pole configurations III 2640LH 2640LH/2 O3.00x0.50 SI (.118DIAx0.50 IS) 2 0.80 (.031) 6.35 (.25) 3 6.35x0.80 (.25x.031) 4.50 (.177) 1 O3.10 (.122DIA) MODEL STRUCTURE 11.00 (.433) 18.50 (.728) 32.00 (1.259) D 32.00 (1.259) A1 A2 32.00 (1.259) OFF ON ON 11.10 (.437) 25.00 (.984) OFF 17.00 (.669) 25.00 (.984) ON ON ON 9.00 (.354) 25.00 (.984) Solder lug/ quick-connect 2631LH/2 2636LH/2 2639LH/2 14.70 (.578) Screw term. + clamp 2631LH 2636LH 2639LH III II I A2-A1 A2-A3 B5-B4 B5-B6 6.35x0.80 (.25x.031) 2600LH - single pole 6.80 (.267) A3 2.00 (.078) 25.00 (.984) 11.00 (.433) ON ON MOM ON MOM ON ON OFF ON ON ON ON OFF MOM OFF MOM OFF ON 9.00 (.354) A1 B4 A2 A3 B5 B6 17.00 (.669) 11.10 (.437) 18.50 (.728) 14.70 (.578) Solder lug/ quick-connect 2641LH/2 2644LH/2* 2645LH/2 2646LH/2 2647LH/2 2648LH/2 2649LH/2 6.80 (.267) Screw term. + clamp 2641LH 2644LH* 2645LH 2646LH 2647LH 2648LH 2649LH III II I A2-A1 A2-A3 B5-B4 B5-B6 6.35x0.80 (.25x.031) 2600LH - double pole 2.00 (.078) 25.00 (.984) * Function 4 : SP in DP case, see end of catalogue. Solder lug/ quick-connect 2631LP/2 2636LP/2 2639LP/2 11.00 (.433) ON ON ON OFF OFF ON ON 10.00 (.393) 17.00 (.669) 11.10 (.437) 18.50 (.728) A1 14.70 (.578) Screw term. + clamp 2631LP 2636LP 2639LP III II I A2-A1 A2-A3 B5-B4 B5-B6 6.35x0.80 (.25x.031) 2600LP - with protection guard - single pole 2.00 (.078) D-52 www.apem.com 6.80 (.267) A2 A3 25.00 (.984) APEM 2600 series Illuminated and non-illuminated rocker switches OFF ON ON ON ON OFF MOM OFF MOM OFF ON A1 B4 A2 A3 B5 B6 17.00 (.669) 11.10 (.437) 18.50 (.728) 2.00 (.078) 25.00 (.984) ON ON MOM ON MOM ON ON 10.00 (.393) 32.00 (1.259) 11.00 (.433) 14.70 (.578) Solder lug/ quick-connect 2641LP/2 2644LP/2* 2645LP/2 2646LP/2 2647LP/2 2648LP/2 2649LP/2 6.80 (.267) Screw term. + clamp 2641LP 2644LP* 2645LP 2646LP 2647LP 2648LP 2649LP III II I A2-A1 A2-A3 B5-B4 B5-B6 6.35x0.80 (.25x.031) 2600LP - with protection guard - double pole 25.00 (.984) * Function 4 : SP in DP case, see end of catalogue. PANEL CUT-OUT 22.00 (.866) 30.00 (1.181) D TERMINAL OPTION o1.50 (.059DIA) Specify after LH or LP. /3 APEM Normalized quick-connect terminals 6,35 x 0,8 (.250 x .031) www.apem.com 6.35x0.80 (.250x.031) D-53 2600 series Illuminated and non-illuminated rocker switches CONTACT MATERIALS A C Silver Copper, silver plated (available with functions 1, 6 and 9 only) FRAME COLOURS D 1 1/4 2 4 7/1 8 B E Blue Dark blue Black (standard) Grey White Chrome plated Light brown Dark brown This option has UL approval only. ROCKER SHAPES 1 2 3 Plain V-shaped Concave D-54 www.apem.com APEM 2600 series Illuminated and non-illuminated rocker switches ROCKER COLOURS For illuminated switches Without rocker Blue* Green* Yellow Red White Orange Plain rocker P/N - U881 U883 U885 U886 U887 U889 V-shaped rocker P/N - U861 U863 U865 U866 U867 U869 Concave rocker P/N - U871 U873 U875 U876 U877 U879 Colour code 0 1 3 5 6 7/1 9 * With green or blue rocker, use fluorescent lamp only. For non-illuminated switches or switches with illuminated window (*) Without Light rocker brown Dark brown Beige Dark blue Blue Black Green Grey Yellow Red White Orange Plain rocker P/N - U1250B U1250BF U1250 U1251 U1251/4 U1252 U1253 U1254 U1255 U1256 U1257 U1259 V-shaped rocker P/N - U1270B U1270BF U1270 U1271 U1271/4 U1272 U1273 U1274 U1275 U1276 U1277 U1279 Concave rocker P/N - U1260B U1260BF U1260 U1261 U1261/4 U1262 U1263 U1264 U1265 U1266 U1267 U1269 Colour code 0 02 04 03 10 14 20* 30* 50 40 60* 70 90 Complete box with one of above colour codes. To order rockers separately, use their P/N (U....) and complete box with code 0. Rockers with illuminated windows (codes 20, 30, 60) : part numbers on request. ROCKER MARKING 4 1 4 1 4 1 4 1 4 5 2 5 2 5 2 5 2 5 1 4 2 5 1 3 2 2 6 4 5 5 4 6 1 4 1 4 1 4 1 2 5 2 5 2 5 2 3 6 3 6 3 6 3 STOP OFF - STOP ON COLOUR 6 3 6 3 6 3 6 3 6 STOP MARKING 3 6 3 1 Black 00 01 02 06 07 08 03 04 05* 40 43* 46 Red 00 11 12 16 17 18 13 14 15* 41 44* 47 White 00 21 22 26 27 28 23 24 25* 42 45* 48 * Not available on V-shaped rockers Special markings and marking on rockers with illuminated window : consult factory. APEM www.apem.com D-55 D 2600 series Illuminated and non-illuminated rocker switches LAMP L0 Non-illuminated switch L6V Filament lamp 6V L12V Filament lamp 12V L24V Filament lamp 24V L110V Neon lamp 110VAC L110V1 BLUE fluorescent lamp 110VAC L110V3 Green fluorescent lamp 110VAC L220V Neon lamp 220VAC L220V1 BLUE fluorescent lamp 220VAC L220V3 Green fluorescent lamp 220VAC L380V Neon lamp 380VAC L380V1 BLUE fluorescent lamp 380VAC L380V3 Green fluorescent lamp 380VAC EN61058-1 approved version without lamp (3 position switches) LI B4 B5 A1 A2 For illuminated models, the lamp is always connected between center terminals 2 and 5. Lamps L380V, L380V1 and L380V3 are not UL/CSA approved. D ILLUMINATED WINDOW For black, green and red rockers only /3 /6 Green Red o (.19 5.00 7 DIA ) With green, use fluorescent lamp only. No marking available on illuminated windows. D-56 www.apem.com APEM