HITANO ENTERPRISE CORP. FR151G-FR157G TECHNICAL SPECIFICATIONS OF FAST RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.5 Amperes FEATURES *High reliability *Low leakage *Low forward voltage drop *High current capability *High switching capability *Glass passivated junction MECHANICAL DATA *Case : Molded plastic *Epoxy : UL 94V-0 rate flame retardant *Lead : MIL-STD-202E , Method 208 guaranteed *Mounting position : Any *Weight : 0.38 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz , resistive or inductive load. Dimensions in inches and (millimeters) For capacitive load , derate current by 20%. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At TA =55 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous Forward Voltage at 1.5A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA =25 Maximum Full Load Reverse Current Full Cycle Average, .375*(9.5mm) lead length at TL=55 Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range SYMBOL FR151G FR152G FR153G FR154G FR155G FR156G FR157G UNITS VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 Valts Valts Valts lO 1.5 Amps IFSM 60 Amps VF 1.3 Valts 5.0 uAmp s 100 uAmp s IR trr CJ TJ, TSTG 150 NOTES: 1. Test Conditions : IF = 0.5A ,I R = 1.0A ,IRR = 0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0 volts. 250 40 -65 to +150 500 nSec pF RATING AND CHARACTERISTIC CURVES (FR151G THRU FR157G)