TESTING DS2YRELAYS MINIATURE RELAY 20 .787 FEATURES 9.9 .390 * 2 Form C contact * High sensitivity-200 mW nominal operating power * High breakdown voltage 1500 V FCC surge between open contacts * DIP-2C type matching 16 pin IC socket * Sealed construction 9.3 .366 mm inch SPECIFICATIONS Characteristics (at 20C 68F) Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Max. switching power Max. switching voltage Rating (resistive) Max. switching current Max. carrying current Mechanical Expected life (min. 1 A 30 V DC operations) Electrical 2 A 30 V DC Initial insulation resistance*1 2 Form C Between open contacts Initial breakdown Between contact sets voltage*2 Between contact and coil FCC surge voltage between contacts and coil Operate time*3 (at nominal voltage) Release time*3 (at nominal voltage) Set time*3 (latching) (at nominal voltage) Reset time*3 (latching) (at nominal voltage) 50 m Gold-clad sliver 60 W, 62.5 VA 220 V DC, 250 V AC 2A 3A 1x108 5x105 1x105 Temperature rise Coil (polarized) (at 20C 68F) Single side stable 2 coil latching Minimum operating power Nominal operating power Minimum set and reset power Nominal set and reset power Approx. 98 mW (147 mW: 48 V) Approx. 200 mW (300 mW: 48 V) Approx. 88 mW (177 mW: 48 V) Approx. 180 mW (360 mW: 48 V) Destructive* 5 Functional*6 Vibration resistance Destructive Ambient Conditions for operation, temp. transport and storage*7 (Not freezing and condensHumidity ing at low temperature) Unit weight Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms, detection time: 10s *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10s *7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 61). Functional*4 Shock resistance Min. 100 M (at 500 V DC) 750 Vrms 1,000 Vrms 1,000 Vrms 1,500 V Approx. 4 ms Approx. 3 ms Approx. 3 ms Approx. 3 ms Max. 65C with nominal voltage across coil and at nominal switching capacity Min. 490 m/s2 {50 G} Min. 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 3.3 mm 10 to 55 Hz at double amplitude of 5 mm -40C to +70C -40F to +158F 5 to 85% R.H. Approx. 4 g .14 oz FCC (Federal Communication Commission) requests following standard as Breakdown Voltage specification. 1500V 750V 10 s 160 s TYPICAL APPLICATIONS * Telecommunication equipment * Office equipment * Computer peripherals * Security alarm systems * Medical equipment ORDERING INFORMATION Ex DS2Y-S Operating function Nil: Single side stable L2: 2 coil latching L2 DC12 V Coil voltage DC 1.5, 3, 5, 6, 9, 12, 24, 48 V R Polarity Nil: Standard polarity R: Reverse polarity (Note) Standard packing: Carton: 50 pcs. Case: 500 pcs. 195 DS2Y TYPES AND COIL DATA (at 20C 68F) Single side stable Nominal voltage, V DC 1.5 3 5 6 9 12 24 48 Pick-up voltage, V DC (max.) 1.05 2.10 3.5 4.2 6.3 8.4 16.8 33.6 Part No. DS2Y-S-DC1.5V DS2Y-S-DC3V DS2Y-S-DC5V DS2Y-S-DC6V DS2Y-S-DC9V DS2Y-S-DC12V DS2Y-S-DC24V DS2Y-S-DC48V Drop-out voltage, V DC (min.) 0.15 0.3 0.5 0.6 0.9 1.2 2.4 4.8 Nominal operating current mA (10%) 132.7 66.7 40 33.3 22.2 16.7 8.3 6.3 Coil resistance, (10%) 11.3 45 125 180 405 720 2,880 7,680 Nominal operating power mW 200 200 200 200 200 200 200 300 Maximum allowable voltage, V DC (at 50C 122F ) 3 6 10 12 18 24 48 86 (Note) Standard packing: Carton: 50 pcs. Case: 500 pcs. 2 coil latching Nominal voltage, V DC Part No. Reset set, V DC (max.) 1.5 3 5 6 9 12 24 48 DS2Y-SL2-DC1.5V DS2Y-SL2-DC3V DS2Y-SL2-DC5V DS2Y-SL2-DC6V DS2Y-SL2-DC9V DS2Y-SL2-DC12V DS2Y-SL2-DC24V DS2Y-SL2-DC48V 1.05 2.1 3.5 4.2 6.3 8.4 16.8 33.6 Nominal operating current mA (10%) Set Reset 120 120 60 60 36 36 30 30 20 20 15 15 7.5 7.5 7.5 7.5 Coil resistance, (10%) Set Reset 12.5 12.5 50 50 139 139 200 200 450 450 800 800 3,200 3,200 6,400 6,400 Nominal operating power, mW Set Reset 180 180 180 180 180 180 180 180 180 180 180 180 180 180 360 360 Maximum allowable voltage, V DC (at 50C 122F ) 3 6 10 12 18 24 48 72 (Note) Standard packing: Carton: 50 pcs. Case: 500 pcs. DIMENSIONS mm inch Single side stable PC board pattern (Copper-side view) 9.9 .390 20 .787 2.54 .100 9.3 .366 5.08 5.08 .200 .200 7.62 .300 2.0 .078 0.6 .024 5.6 .220 7.62 .300 9 11 13 N.O. N.C. COM 16 - N.O. N.C. COM 8 6 4 + 1 2.54 .100 0.6 .024 0.6 .024 Schematic (Bottom view) (Deenergized position) 8-0.9 dia 8-.035 dia 3.4 .134 7.62 .300 0.3 .012 matching 16 pin IC socket Tolerance: 0.1 .004 Direction indication* *A polarity bar shows the relay direction. General tolerance: 0.3 .012 PC board pattern (Copper-side view) (Reset position) 10-0.9 dia 10-.035 dia 9.9 .390 2.54 .100 9.3 .366 5.08 5.08 5.08 .200 .200 .200 2.54 .100 2.0 .078 0.6 .024 General tolerance: 0.3 .012 196 2.54 .100 0.6 .024 0.6 .024 5.6 .220 7.62 .300 3.4 .134 0.3 .012 9 11 13 SET RST COM 7.62 .300 SET RST COM 8 6 4 matching 16 pin IC socket Tolerance: 0.1 .004 15 16 - - Reset 20 .787 Schematic (Bottom view) Set 2 coil latching + + 2 1 Direction indication* *A polarity bar shows the relay direction. Diagram shows the "reset" posetion when terminals 2 and 15 are energized. Energize terminals 1 and 16 to transfer contacts. DS2Y REFERENCE DATA 1. Maximum switching capacity 2-(1) Coil temperature rise (Single side stable) 2-(2) Coil temperature rise 2 coil latching Tested sample: DS2Y-S-DC12V, 5 pcs. Measured portion: Inside the coil Ambient temperature: 21C to 25C 70F to 77F Tested sample: DS2Y-SL2-DC12V, 5 pcs. Measured portion: Inside the coil Ambient temperature: 21C to 25C 70F to 77F 1,000 V Temperature rise, C 100 V 10 V 100 mA Tested sample: DS2Y-S-DC12V, 10 pcs. Ambient temperature: 20C 68F Time, ms 3 2 Mean value Mean value 0 80 100 120 Coil applied voltage, %V 2A 0A 0 110 Coil applied voltage, %V 100 110 Coil applied voltage, %V 4-(1) Influence of adjacent mounting 4-(2) Influence of adjacent mounting Tested sample: DS2Y-S-DC12V, 10 pcs. Ambient temperature: 20C 68 F TEST METHOD 1. Apply nominal voltage to No. (1) and (3) DS2Y relays. 2. Measure pick-up voltage and drop-out voltage of No. (2) relay when inter-relay distance ( ) changes. TEST METHOD 1. Apply nominal voltage to No. (1) and (3) DS2Y relays. 2. Measure pick-up voltage and drop-out voltage of No. (2) relay when inter-relay distance ( ) changes. (1) OFF 10 (2) (3) OFF 8 ON ON Pick-up voltage 6 OFF OFF 4 Drop-out voltage ON ON 2 1 30 Tested sample: DS2Y-S-DC12V, 10 pcs. Ambient temperature: 20C 68F Operate time Release time 4 3A 20 100 1A Switching current 3. Operate/release time for single side stable (Without diode) 5 0A 0 Pick-up/Drop-out voltage, V 10 mA 10 A 2A 20 Pick-up/Drop-out voltage, V Contact voltage 3A 30 Temperature rise, C Set coil Reset coil 10 (1) OFF (2) (3) OFF 8 Pick-up voltage ON ON OFF OFF ON ON 6 4 Drop-out voltage 2 5 10 15 .197 .394 .591 Inter-relay distance, mm inch 0 5 10 15 .197 .394 .591 Inter-relay distance, mm inch For Cautions for Use, see Relay Technical Information (Page 48 to 76). 9/1/2000 All Rights Reserved, (c) Copyright Matsushita Electric Works, 197 Ltd. Go To Online Catalog