AAAF5051-05 5.0 x 5.0 mm Full-Color Surface Mount LED Lamp DESCRIPTIONS z z z z z The Blue source color devices are made with InGaN on Sapphire-substrate Light Emitting Diode The Reddish-Orange source color devices are made with AlGalnP on Si-substrate Light Emitting Diode The Green source color devices are made with InGaN on Sapphire-substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded z z z z Suitable for all SMD assembly and solder process Available on tape and reel White SMD package, silicone resin Package: 500 pcs / reel Moisture sensitivity level: 3 RoHS compliant APPLICATIONS z z z z z RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : 0.1) on fid z en FEATURES z PRELIMINARY SPEC tia l z PACKAGE DIMENSIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices C Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Part Number Emitting Color (Material) Iv (mcd) @ 150mA [2] Reddish-Orange (AlGaInP) Viewing Angle [1] Lens Type Blue(InGaN) AAAF5051-05 v (lm) @ 150mA* [2] Water Clear Green(InGaN) Min. Typ. Min. Typ. 1600 2300 5* 7.2* 1900 4000 8.6* 14* 7000 9000 20* 28* 21/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%.*LEDs are binned according to their luminous flux. 3. Luminous intensity / luminous Flux value is traceable to CIE127-2007 standards.. (c) 2018 Kingbright. All Rights Reserved. Spec No: DSAP4576 / 1201009363 Rev No: V.2B Date: 10/05/2018 Page 1 / 5 AAAF5051-05 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25C Parameter Symbol Emitting Color peak Value Unit Max. Blue Reddish-Orange Green 452 633 515 - nm dom [1] Blue Reddish-Orange Green 460 624 525 - nm Blue Reddish-Orange Green 25 20 30 - nm Forward Voltage IF = 150mA VF [2] Blue Reddish-Orange Green 3.3 2.3 3.3 3.8 2.8 3.8 V Allowable Reverse Current IR Blue Reddish-Orange Green - 85 85 85 mA Blue Reddish-Orange Green 0.04 0.13 0.05 - nm/C Blue Reddish-Orange Green 0.03 0.06 0.03 - nm/C Blue Reddish-Orange Green -3.0 -2.0 -3.0 - mV/C Wavelength at Peak Emission IF = 150mA Dominant Wavelength IF = 150mA Spectral Bandwidth at 50% REL MAX IF = 150mA TCpeak Temperature Coefficient of dom IF = 150mA, -10C T 100C TCdom Temperature Coefficient of VF IF = 150mA, -10C T 100C TCV en Temperature Coefficient of peak IF = 150mA, -10C T 100C tia l Typ. on fid Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25C Parameter Symbol Value Unit Blue Reddish-Orange Green PD 0.57 0.42 0.57 W Reverse Voltage VR 5 5 5 V Junction Temperature Tj 125 115 125 C Operating Temperature Top -40 to +85 C Storage Temperature Tstg -40 to +85 C DC Forward Current IF [1] 150 150 150 mA Peak Forward Current IFM [2] 300 300 300 mA Electrostatic Discharge Threshold (HBM) - 8000 8000 8000 V Thermal Resistance (Junction / Ambient) Rth JA [1] 80 100 120 C/W Thermal Resistance (Junction / Solder point) Rth JS [1] 35 45 55 C/W C Power Dissipation Notes: 1. Results from mounting on Aluminum Board. 2. 1/10 Duty Cycle, 0.1ms Pulse Width. 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity - Ref JEDEC/JESD625-A and JEDEC/J-STD-033. (c) 2018 Kingbright. All Rights Reserved. Spec No: DSAP4576 / 1201009363 Rev No: V.2B Date: 10/05/2018 Page 2 / 5 AAAF5051-05 TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Blue Green Reddish-Orange Ta = 25 C Ta = 25 C 80% 15 30 45 -45 60% 60 -60 40% 20% 75 -75 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90 1.0 BLUE Forward Current vs. Forward Voltage 90 60 30 2.8 3.0 3.2 Forward voltage (V) 0.8 0.6 0.4 0.2 0.0 3.4 0 30 60 90 120 Forward current (mA) 90 1.0 0.5 Luminous Intensity vs. Ambient Temperature 2.5 180 150 120 90 60 30 0 150 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) -40 -20 0 20 40 60 80 100 Ambient temperature (C) on fid 0 2.6 Ta = 25 C en Luminous intensity normalised at 150 mA 120 Permissible forward current (mA) 1.0 Ta = 25 C 0.0 Forward Current Derating Curve Luminous Intensity vs. Forward Current 150 0.5 Luminous intensity normalised at T a = 25 C 0% 350 Forward current (mA) 0 -15 -30 tia l Relative Intensity (a. u.) 100% REDDISH-ORANGE 90 60 30 0 1.4 1.6 1.8 2.0 2.2 Forward voltage (V) Permissible forward current (mA) 120 Luminous intensity normalised at 150 mA 1.0 Ta = 25 C Ta = 25 C 0.8 0.6 0.4 0.2 C Forward current (mA) 150 Luminous Intensity vs. Forward Current 0.0 2.4 0 30 60 90 120 Forward current (mA) Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature 180 2.5 Luminous intensity normalised at T a = 25 C Forward Current vs. Forward Voltage 150 120 90 60 30 0 150 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) -40 -20 0 20 40 60 80 100 Ambient temperature (C) GREEN 90 60 30 0 2.6 2.8 3.0 3.2 Forward voltage (V) 3.4 Permissible forward current (mA) 1.0 Ta = 25 C Luminous intensity normalised at 150 mA Forward current (mA) 150 120 Forward Current Derating Curve Luminous Intensity vs. Forward Current Ta = 25 C 0.8 0.6 0.4 0.2 0.0 0 30 60 90 120 Forward current (mA) 150 (c) 2018 Kingbright. All Rights Reserved. Spec No: DSAP4576 / 1201009363 Rev No: V.2B Date: 10/05/2018 Luminous Intensity vs. Ambient Temperature 180 2.5 Luminous intensity normalised at T a = 25 C Forward Current vs. Forward Voltage 150 120 90 60 30 0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) Page 3 / 5 AAAF5051-05 REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm) on fid en Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. tia l REEL DIMENSION (units : mm) HANDLING PRECAUTIONS Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. C 1. Handle the component along the side surfaces by using forceps or 2. Do not directly touch or handle the silicone lens 3. Do not stack together assembled surface. It may damage the internal circuitry. appropriate tools. PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4-1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4-2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4-3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. (c) 2018 Kingbright. All Rights Reserved. Spec No: DSAP4576 / 1201009363 Rev No: V.2B Date: 10/05/2018 Page 4 / 5 AAAF5051-05 C on fid en tia l PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes (c) 2018 Kingbright. All Rights Reserved. Spec No: DSAP4576 / 1201009363 Rev No: V.2B Date: 10/05/2018 Page 5 / 5