Rubber Hose, Fittings &
Assemblies for Aerospace
Applications
• Lightweight and Flexible
• Qualified to Industry Standards
Aeroquip®
306 Low Pressure Hose, Fittings and Assemblies 1
303, 302A Medium Pressure Hose, Fittings and Assemblies 2
303, 302A Medium Pressure, Flared Hose Assemblies, Sizes -4 through -10 3
303, 302A Medium Pressure, Flared Hose Assemblies, Sizes -12 through -32 3
303, 302A Medium Pressure, Flareless Fittings and Assemblies 4
Aircraft Rubber Hose Assembly Instructions 5
Hose Cut-Off Factors 6
Rubber Hose Assembly Equipment 7
Table of Contents
EATON Aerospace Group TF100-16E April 2013 1
306 Low Pressure Hose, Fittings and Assemblies
Construction:
• Inner Tube: seamless
synthetic rubber compound
• Reinforcement: single
cotton braid
• Outer Cover: synthetic
rubber cover
Operating Temperatures:
-65°F to +160°F
(-53ºC to +71ºC)
Identification:
Black cover with linear yellow
indicator stripe interspersed
with symbol “LP”, hose
manufacturer’s code, size and
date of manufacture (quarter
year/year). Spaced 180° from
this is “Aeroquip 306” in a white
stipe. Markings repeated six
inches apart.
Application:
Air or vacuum instrument
systems, automatic pilots and
lines to pressure gauges used
with these systems as specified
in MS33620. Hose assemblies
conform to AN6270. Hose
conforms to MIL-DTL-5593.
Fittings conform to MIL -
DT L - 3872 6 and MS27404.*
* Supersedes AN773
306 Hose / MIL-DTL-5593
ASSEMBLY SAMPLE PART NUMBER
359 — 4D 0123
Base No.
Size
Length in Eights (3/8”)
Length in Inches (12”)
Material Code
COMPLETE ASSEMBLY
Including 471 Fittings
HOSE
Part No. Tube
Size
O.D.
Weight
12” Ass’y (lbs.)
Part No. Hose
Size
I.D.
Hose
Size
O.D.
Max.
Oper.
P.S.I.
Min.
Proof
P.S.I.
Min.
Burst
P.S.I.
Min.
Bend
radii
Weight
per inch
(lbs.)
359-2DL
AN6270-2-L
359-3DL
AN6270-3-L
359-4L
AN6270-4-L
359-6DL
AN6270-6-L
359-8DL
AN6270-8-L
359-10DL
AN6270-10-L
1/8
3/16
1/4
3/8
1/2
5/8
.061
.080
.106
.145
.236
.292
306-2
MIL-DTL-5593-2
306-3
MIL-DTL-5593-3
306-4
MIL-DTL-5593-4
306-6
MIL-DTL-5593-6
306-8
MIL-DTL-5593-8
306-10
MIL-DTL-5593-10
.125
.188
.250
.375
.500
.625
.344
.406
.469
.594
.750
.875
300
250
200
150
150
150
600
500
400
300
250
250
2000
170 0
1250
1000
750
700
2.00
2.00
4.00
4.00
6.00
6.00
.004
.005
.006
.008
.012
.014
Flared AN818 Swivel Nut
• 359AssemblyAN6270
• TomatewithMS33656,
MS33657, AS4395,
AS4396
HOSE FITTING SOCKET
Part No. Max.
Dim.
ADim.
B
Part
No. Dim.
F
Max.
Dim.
K
Min.
Dim.
HDim.
M
Max.
Dim.
N
471-2D
MS27404-2D*
471-3D
MS27404-3D*
471-4D
MS27404-4D*
471-6D
MS27404-6D*
471-8D
MS27404-8D*
471-10D
MS27404-10D*
.88
1. 0 0
1.04
1. 15
1.37
1.57
.40
.44
.47
.54
.67
.72
213-2D
213-3D
213-4D
213-6D
213-8D
213-10D
.531
.562
.625
.650
.800
.950
.453
.516
.578
.703
.891
.953
.059
.122
.169
.294
.388
.481
.375
.438
.563
.688
.875
1.000
.436
.509
.654
.798
1. 01 4
1.158
Length of Assembly
231 Nipple
290/AN818 Nut
F
(K = diameter)
H (I.D.)
37”
M hex.
T
thread
UNF
(N = distance across corners)
Dim.
C
.34
.32
.35
.38
.43
.51
Weight
(lbs.)
.008
.012
.020
.029
.054
.072
Part
No.
231-2D
231-3D
231-4D
231-6D
231-8D
231-10D
NIPPLE NUT
Part No.
290-2D
290-3D
290-4D
290-6D
290-8D
290-10D
5/16 - 24
3/8 -24
7/16 -20
9/16 -18
3/4 -16
7/8 -14
Thread
T
Material & Finish:
Nut, nipple and socket are
anodized aluminum. All
materials and finishes
conform to applicable
specifications for end fittings
used in aircraft fluid systems.
All dimensions in inches.
* Supersedes AN773.
A
B
C
471/MS27404
Hose Fitting
213 Socket
2 EATON Aerospace Group TF100-16E April 2013
Construction:
• Inner Tube: seamless
synthetic rubber compound
• Reinforcement: synthetic
impregnated single-wire
braid over single cotton
braid
• Outer Cover: synthetic
impregnated oil-resistant
cotton braid
Operating Temperatures:
• 303Hose:-65°to+250°F
• 302AHose:-40°to+250°F
Identification:
Grey-black braided cover with
linear yellow marking consisting
of — “MIL-DTL-8794 ,size,
date of manufacture (quarter
year/year) and hose
manufacturer’s code.” Spaced
90° from this is a yellow
indicator stripe interspersed
with “Aeroquip 303” or
“Aeroquip 302A.” Markings
repeated nine inches apart.
Application:
Medium pressure hydraulic,
pneumatic, fuel, oil and coolant
systems specified in MS33620.
Hose assemblies conform to
MIL-DTL-8795 and MS28741.
Hose conforms to
MIL-DTL-8794.
Fittings conform to MIL-A-5070
and MS24587.* Hose may be
used in submerged applications.
* Supersedes MS28740, fittings
dimensionally and functionally
interchangeable.
303, 302A Medium Pressure Hose, Fittings, and Assemblies
303, 302A/ MIL-DTL-8794 Hose
ASSEMBLY SAMPLE PART NUMBER
350 — 6 — 0123
Base No.
Size
Length in Eights (3/8”)
Length in Inches (12”)
COMPLETE ASSEMBLY
Including 491 Fittings HOSE
Part No. Tube
Size
O.D.
Weight
12” Ass’y
(lbs.)
Part No. Hose
Size
I.D.
Hose
Size
O.D.
Max.
Oper.
P.S.I.
Min.
Proof
P.S.I.
Min.
Burst
P.S.I.
Min.
Bend
radii**
Weight
per inch
(lbs.)
350-3-L †
MS28741-3-L
350-4-L ††
MS28741-4-L
350-5-L
MS28741-5-L
350-6-L
MS28741-6-L
360-8-DL
MS28741-8-L
360-10-DL
MS28741-10-L
360-12-DL
MS28741-12-L
390A16DL
MS28741-16-L
390A20DL
MS28741-20-L
390A24DL
MS28741-24-L
390A32DL
MS28741-32-L
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
11/4
11/2
2
.175
.228
.279
.391
.417
.580
.750
.824
1.274
1.558
2.453
303-3
MIL-DTL-8794-3
303-4
MIL-DTL-8794-4
303-5
MIL-DTL-8794-5
303-6
MIL-DTL-8794-6
303-8
MIL-DTL-8794-8
303-10
MIL-DTL-8794-10
303-12
MIL-DTL-8794-12
302A16
MIL-DTL-8794-16
302A20
MIL-DTL-8794-20
302A24
MIL-DTL-8794-24
302A32
MIL-DTL-8794-32
.125
.188
.250
.313
.406
.500
.625
.875
1.125
1.375
1.812
.453
.516
.578
.672
.766
.922
1.078
1.234
1.500
1.750
2.219
3000
3000
3000
2000
2000
1750
1500
800
600
500
350
6000
6000
5000
4500
4000
3500
3000
1600
1250
1000
700
12000
12000
10000
9000
8000
7000
6000
3200
2500
2000
1400
3.00
3.00
3.38
4.00
4.62
5.50
6.50
7.38
9.00
11. 0 0
13.25
.010
.011
.013
.019
.022
.031
.038
.037
.043
.056
.078
*
* Use D instead of (-) after size for -8 and larger
** At maximum operating pressure.
† Not to be used in hydraulic systems.
Flared AN818 Swivel Nut
• 350,360,390A
Assembly MS28741
• TomatewithMS33656,
MS33657, AS4395, AS4396
210, 215, 212/
MS24590,
MS24591 Socket
251, 271/MS24588,
MS24589 Nipple
290/AN818 Nut
F
(K = distance across)
H (I.D.)
37°
M hex.
T
thread
UNF
(N = distance across corners)
Material & Finish:
Nut and nipple, sizes 3 through
6, cadmium-plated steel. Nut and
nipple sizes 8 and up, and
socket, anodized aluminum. All
materials and finishes conform
to applicable specifications for
end fittings used in aircraft fluid
systems.
Elbow fittings are available for
303, 302A hose.
Length of Assembly
G
hex.
A
B
C
491, 451/
MS24587
Hose Fitting
HOSE FITTING SOCKET
Part No. Max.
Dim.
ADim.
B
Part No. Dim.
F
Max.
Dim.
K
Min.
Dim.
HDim.
M
Max.
Dim.
N
491-3
*MS24587-3
491-4
*MS24587-4
491-5
*MS24587-5
491-6
*MS24587-6
491-8D
*MS24587-8
491-10D
*MS24587-10
491-12D
*MS24587-12
491-16D
*MS24587-16
491-20D
*MS24587-20
491-24D
*MS24587-24
491-32D
*MS24587-32
1.43
1.51
1.64
1.79
2.22
2.42
2.70
2.34
2.48
2.67
3.21
.65
.65
. 74
.77
.94
1. 0 0
1. 0 0
.94
1. 0 0
1.09
1.24
210-3D
MS24590-3
210-4D
MS24590-4
210-5D
MS24590-5
210-6D
MS24590-6
215-8D
MS24590-8
215-10D
MS24590-10
215-12D
MS24590-12
212-16D
MS24591-16
212-20D
MS24591-20
212-24D
MS24591-24
212-32D
MS24591-32
.1.000
1. 10 0
1.200
1.300
1.650
1.800
2.100
1.661
1.750
1.845
2.250
.630
.693
.755
.880
1.005
1.234
1.359
1.546
1.921
2.124
2.640
.123
.170
.232
.295
.390
.484
.608
.810
1.042
1.276
1.745
.438
.563
.625
.688
.875
1.000
1.250
1.500
2.000
2.250
2.875
.51
.65
.72
.80
1. 01
1. 16
1.45
1. 74
2.33
2.62
3.34
Dim.
C
.32
.35
.38
.38
.43
.51
.57
.60
.64
. 74
.93
Weight
(lbs.)
.034
.055
.071
.096
.097
.135
.185
.220
.422
.504
.850
Part No.
251-3
MS24588-3
251-4
MS24588-4
251-5
MS24588-5
251-6
MS24588-6
251-8D
MS24588-8
251-10D
MS24588-10
251-12D
MS24588-12
251-16D
MS24589-16
251-20D
MS24589-20
251-24D
MS24589-24
251-32D
MS24589-32
NIPPLE NUT
Part No.
290-3
290-4
290-5
290-6
290-8D
290-10D
290-12D
290-16D
290-20D
290-24D
290-32D
3/8 - 24
7/16 - 20
1/2 - 20
9/16 - 18
3/4 - 16
7/8 - 14
11/16 - 12
15/16 - 12
15/8 - 12
17/8 - 12
21/2 - 12
Thread
T
All dimensions in inches.
* Supersedes MS28740, fittings dimensionally and functionally interchangeable.
†† May be used where dynamic impulse does not exceed 3750 psi. If dynamic
impulses of 4500 psi are required MIL-H-8790 hose assemblies shall be used.
EATON Aerospace Group TF100-16E April 2013 3
Fitting A Fitting B Material Fitting A
Part No.
Assembly
Base No.
Fitting B
Part No.
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Alum.
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
491
451
491
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
980006
980006
980006
980006
980006
980006
980006
980006
980005
980005
980005
980005
360
390A
350
624000
624000
950012
950012
624040
624040
950004
950004
624023
624023
950010
950816
630907
624071
950003
950668
630908
624055
950002
950680
630909
624036
491
451
491
491 or 451
491 or 451
980006
980006
980006
980006
980005
980005
980005
980005
980006
980006
980006
980006
980005
980005
980005
980005
980005
980005
980005
980005
Type
303, 302A Medium Pressure, Flared Hose Assemblies
-4 through -10 and -12 through -32
-4 through -10 Flared AN818 Swivel Nut Fittings and Assemblies
-12 through -32 Flared AN818 Swivel Nut Fittings and Assemblies
Alum.
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
91
451
491
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
491 or 451
980136
980136
980136
980136
980136
980136
980136
980136
980137
980137
980137
980137
360
390A
350
624000
624000
950234
950234
624037
624037
950192
950192
624066
624066
950247
950817
624089
630910
950233
950818
630911
624912
950248
950819
630905
630913
491
451
491
491 or 451
491 or 451
980136
980136
980136
980136
980137
980137
980137
980137
980136
980136
980136
980136
980137
980137
980137
980137
980137
980137
980137
980137
Fitting A Fitting B Material Fitting A
Part No.
Assembly
Base No.
Fitting B
Part No.
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Type
4 EATON Aerospace Group TF100-16E April 2013
Globeseal Flareless
• 950532Assembly
• TomatewithMS33514,
MS33515, AS33514,
AS333515
A
B
440
Hose Fitting
210, 215, Socket
F
(K = distance across corners)
H (I.D.)
Material & Finish:
Nut and nipple, sizes 4 through
6, cadmium-plated steel. Nut
and nipple sizes 8 and up, and
socket, anodized aluminum. All
materials and finishes conform
to applicable specifications for
end fittings used in aircraft
fluid systems.
Length of Assembly
G hex.
T Thread UNJF
Class 38
M hex.
(N = distance across corners)
HOSE FITTING
(Globeseal)
SOCKET
Part
No.
Max.
Dim.
A
Dim.
B
Part
No. Dim.
F
Max.
Dim.
K
Min.
Dim.
H
Dim.
M
440-4
440-5
440-6
440-8D
440-10D
440-12D
440-16D
440-20D
440-24D
1.78
1.92
2.11
2.58
2.84
3.14
2.97
3.17
3.49
.94
1.05
1. 11
1.33
1.46
1.47
1.60
1.72
1.94
210-4D
210-5D
210-6D
215-8D
215-10D
215-12D
212-16D
212-20D
212-24D
1. 10 0
1.200
1.300
1.650
1.800
2.100
1.661
1.750
1.845
.625
.688
.812
.938
1.125
1.250
1.438
1.750
1.938
.170
.232
.295
.390
.484
.608
.810
10.42
1.276
.562
.625
.688
.875
1.000
1.250
1.500
2.000
2.250
.068
.081
.122
.117
.167
.222
.286
.503
.606
Weight
(lbs.)
NIPPLE ASSEMBLY
(Globeseal)
Part
No.
440-3-4
440-3-5
440-3-6
440-3-8D
440-3-10D
440-3-12D
440-3-16D
440-3-20D
440-3-24D
7/16 - 20
1/2 - 20
9/16 - 18
3/4 - 16
7/8 - 14
11/16 - 12
15/16 - 12
15/8 - 12
17/8 - 12
Thread
T
All dimensions in inches.
Dim.
G
.693
.755
.880
1.005
1.234
1.359
1.546
1.921
2.124
Max.
Dim.
N
.65
.72
.80
1. 01
1. 16
1.45
1. 74
2.33
2.62
303, 302A Medium Pressure, Flareless Fittings and Assemblies
440-3-Size
Nipple Assembly
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
Alum.
Steel
440
440
440
440
440
440
440
440
440
440
980688
980688
980688
980688
980688
980688
980688
980688
980688
980688
980569
980569
980569
980569
950532
950532
630943
630942
950781
950781
630945
630944
950645
950645
630947
630946
950785
950782
630949
630949
950786
950783
630951
630950
950787
950784
630953
630952
440
440
440
440
980688
980688
980688
980688
980569
980569
980569
980569
980688
980688
980688
980688
980569
980569
980569
980569
980569
980569
980569
980569
Globeseal Flareless Assemblies
Fitting A Fitting B Material Fitting A
Part No.
Assembly
Base No.
Fitting B
Part No.
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Unsleeved
Firesleeve
Type
EATON Aerospace Group TF100-16E April 2013 5
Step 1.
Cut hose squarely to length. Use
hose cut-off machine or fine tooth
hacksaw. Do not remove the cover
if using a hacksaw; wrap hose
with several layers of tape before
cutting.
Step 2.
Place socket in vise. Do not over-
tighten vise on thin walled sockets
of lightweight fittings. Screw hose
counter-clockwise into socket until
it bottoms. Back off 1/4 turn.
Step 3.
Tighten nipple and nut on ssembly
mandrel. The use of Aeroquip
S1051 hand assembly tools are
recommended to avoid damage to
the sealing surface and to properly
support the inner tube.
Step 4.
Lubricate inside of hose and
nipple threads liberally. Use
lubricating oil, petrolatum or light
grease.
Step 5.
Screw nipple into socket and hose
using wrench on assembly tool
hex. Nut must swivel freely when
assembly tool is removed.
Maximum allowable gap between
nut and socket is 1/16”. On –32
screw in until turning becomes
difficult, back out nipple,
relubricate and reassemble.
Step 1.
Cut hose squarely to length. Use
hose cut off machine or fine tooth
hacksaw. If using a hacksaw, wrap
hose with tape before cutting. Do
not remove cover.
Step 2.
Place socket in vises. Do not over-
tighten vise on thin walled sockets
of lightweight fittings. Screw hose
counter-clockwise into socket until it
bottoms. Back off 1/4 turn.
Step 3.
Flange elbow fittings. Drop flange
over threaded end of nipple. Nipple
shoulder must fit into counter bore
of flange.
Step 4.
Lubricate inside of hose and nipple
threads liberally. Use lubricating oil,
petrolatum or light grease.
Step 5.
Screw nipple into socket and hose
using wrench on elbow hex. Tighten
until hex is snug against socket. On
-32 and larger sizes, screw in until
turning becomes difficult, back out
nipple, relubricate and reassemble.
Step 6.
Adjustments may be necessary to
obtain the desired position angle
between two elbows. In order to
minimize backing off elbows to
position, the following procedure
should supplement Step 5.
A. Tighten both elbows to maximum
allowable gap (reference Step
6C), then start to position for
relative angle between the
elbows.
B. Finish assembly by adjusting both
elbows. Backing-off to position
should be avoided and in no case
should exceed 1/4 turn.
C. Maximum allowable gap between
nipple hex and socket is 1/16”
using 303 and 302A hose.
306, 303 and 302A Hose
Elbow Hose Assemblies - 303 and 302A
Aircraft Rubber Hose Assembly Instructions
6 EATON Aerospace Group TF100-16E April 2013
Hose Cut-off Factors
Length of Assembly “L”
Length of Hose “J”
Cut off factors shown below
indicate difference (in inches)
between Length “L” and Length
“J” illustrated on sample hose
assembly.
Low Pressure
Medium Pressure
HOSE
306 Flared
Fittings
302A
303
Flared
Fittings
302A
303
Globeseal
Flareless
Fittings
ASSEMBLY
Straight Swivel to
Straight Swivel
Straight Swivel to
Straight Swivel
Straight Swivel to
Straight Swivel
-2
.80
—
—
-3
.88
1.32
—
-4
.94
1.30
1.88
-5
—
1.50
2.10
-6
1.08
1.54
2.22
-8
1.34
1.90
2.66
-10
1.44
2.02
2.92
-12
—
2.02
2.94
-16
—
1.90
3.20
-20
—
2.00
3.44
-24
—
2.18
3.88
-32
—
2.50
4.74
HOSE DASH SIZE
EATON Aerospace Group TF100-16E April 2013 7
Eaton designed the S1380 hose
assembly machine to simplify
and speed the assembly of
hoses with standard screw
together reusable fittings.
The machine features a durable
1 H.P., 3-phase, 60 cycle electric
brakemotor operating at 1750
R.P.M. The motor is “C” face
mounted to a speed reducer
which provides a working
spindle with 58.3 R.P.M . With
the S1380 machine you can
quickly assemble straight or
elbow-type reusable fittings on
medium pressure hoses in sizes
-3 (3/16”) through -12 (3/4”) and
high pressure hoses in sizes -4
(1/4”) through -12 (3/4”).
This hose assembly machine is
simple to operate with an easily
adjusted spindle lock for
changing mandrels or operations
and a carriage vise for accurate
fitting assembly.
The complete machine comes
with two sets of chuck jaws, fire
mandrels and operator’s manual.
See brochure AEB-257 for
complete information.
Machine Specifications
Dimensions: 12” high x 34”
long x 27” wide
Weight: 200 lbs. (approx.)
Hose Range: -3 (3/16”) through
-12 (3/4”), medium pressure -4
(1/4”) through -12 (3/4”), high
pressure
Motor Power: 1 horsepower
Electrical Requirements
230/460V, 3 phase, 60 cycle,
120V
Rubber Hose Assembly Equipment
Eaton’s Aeroquip S1385 Hose
Cutoff Saw is compact and easy
to operate. The spring arm is
designed with an improved
stabilizer to insure fast and
efficient cutting of hydraulic
hoses. The S1385 saw will cut
single wire braid hoses through
1.25 inches and 2-wire braid
hoses through 1 inch as well as
textile hoses through 2 inches.
The S1385 cutoff saw is easily
bench-mounted eliminating the
need for a special stand. It is
also equipped with a safety
clutch to prevent motor damage
in case of binding. The blade is
well guarded and can easily be
changed. See brochure AEB-262
for more details.
S1385 Features
• LowCost
• Compact
• EasyOperation
• Bench-Mounted
• Built-inSafetyFeatures
• U.L.Listed
Electrical Requirements
21/2 horsepower electric motor.
115V, single phase, AC-DC, 5-60
Hz, 5200 rpm.
S1385 Hose Cutoff Saw S1380 Hose Assembly Machine
8 EATON Aerospace Group TF100-16E April 2013
FAILURE OR IMPROPER
SELECTION,USE, OR ASSEMBLY
OF THE PRODUCTS AND
COMPONENTS FOR
APPLICATIONS DESCRIBED
HEREIN CAN RESULT IN
POSSIBLE PROPERTY DAMAGE,
PERSONAL INJURY OR DEATH.
This document and any other
related information from Eaton®
Aeroquip® or its affiliates and
authorized distributors, provide
product options for consideration
by Users having technical
expertise with these products.
Due to the wide variety of
applications and operating
conditions for these products and
components, the User is solely
responsible for making the final
selection of the products and
ensuring that all performance,
safety and warning requirements
for the User's intended application
are met. Eaton® Aeroquip®
recommends that Eaton®
Aeroquip® hose, fittings or
assembly equipment must be
used only with other Eaton®
Aeroquip® hose, fittings or
assembly equipment,and Eaton
Aeroquip and/or its affiliates
disclaim any obligation or liability
(including all incidental and
consequential damages)to the
extent Eaton® Aeroquip® hose,
fittings or assembly equipment is
used with any other
manufacturer's hose, fittings or
assembly equipment or in the
event that Eaton® Aeroquip®
recommended processes and
product instructions for hose
assemblies are not followed.
The products described herein,
including product features,
specifications, designs, and
availability are subject to change
at any time without notice.
Copyright © 2013 Eaton
All Rights Reserved
Copying or Editing is Forbidden
Form No. TF100-16E
(Supersedes AA129 & AEB261B)
April 2013
Eaton
Aerospace Group
Fluid & Electrical Distribution Division
300 South East Avenue
Jackson, Michigan 49203-1972
Phone: (517) 787 8121
Fax: (517) 789 2947
Eaton
Aerospace Group
9650 Jeronimo Road
Irvine, California 92618
Phone: (949) 452 9500
Fax: (949) 452 9555
www.eaton.com/aerospace