SECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES 781 782 782H 783 784 750 788 283 388J/V 389/389F 300 9A/92 21 67 219 750H PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com SOCKET COMPATIBLE & FLANGE MOUNT RELAYS 782XAX 781 PR ODUCT L XW X MANUFACTURED UNDER ISO 9002 QS 9000 H (INCHES) CONTA CONTACTS Contact Configuration: Contact Material: Contact Resistance (Initial): Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): TIMING Operate Time: Release Time: DIELECTRIC S TRENGTH Coil to Contacts: Insulation Resistance: TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Cover Protection Category: Weight: 1.54 x 0.83 x 1.10 1.60 x 0.55 x 1.10 0.187 QUICK CONNECT/SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS FLAG INDICATOR L.E.D. STATUS LAMP PUSH BUTTON FINGER GRIP COVER I.D. TAG/WRITE LABEL OPTIONAL FLANGE AND DIN ADAPTERS UL LISTED WHEN USED WITH 70-781D-1 SOCKET FEATURES FEATURES COIL Standard Voltage AC: DC: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: MANUFACTURED UNDER ISO 9002 QS 9000 UNITS 50/60 Hz 0.187 QUICK CONNECT/SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS FLAG INDICATOR L.E.D. STATUS LAMP PUSH BUTTON WITH LOCK DOWN DOOR FINGER GRIP COVER I.D. TAG/WRITE LABEL OPTIONAL FLANGE AND DIN ADAPTERS UL LISTED WHEN USED WITH 70-459-1 OR 70-782D-1 SOCKETS 6, 12, 24,110 / 120, 220 / 230, 240 6, 12, 24, 48, 110 /125 0.9 0.7 Class B (130C) 6, 12, 24,110 / 120, 220 / 230, 240 6, 12, 24, 48,110 /125 1.2 0.9 Class B (130C) m Ohms A V A V Hp Hp SPDT Silver alloy, gold flashed 50 15 277 15 / 0.5 28 / 220 1/2 @ 120 V 1 @ 250 V SPDT Silver alloy, gold flashed 50 20 277 20 / 0.5 28 /220 1/2 @ 120 V 1 @ 250 V ms ms 20 20 25 20 V rms megohms minimum@VDC 2500 100 @ 500 2500 1000 @ 500 C C C C C C -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 operations operations 15 A: 100,000, 20 A: 50,000 10,000,000 100,000 10,000,000 IP grams 40 29 40 36 VA W MATING MATING SOCKETS 70-459-1, 70-782D-1, 70-401-1, 70-402-1 70-781D-1, 70-781F-1, 70-781T-1 SEE SECTION 7 AGENCY GENCY APPR OVALS C US UL Recognized File No. E43641 9/04 1...2 PAGE NUMBER C 40787 LISTED PAGE 11 - 14 US UL Recognized File No. E43641 40787 LISTED PAGE 11, 12, 13, 15 SOCKET COMPATIBLE & FLANGE MOUNT RELAYS 782XBX MANUFACTURED UNDER ISO 9002 QS 9000 MANUFACTURED UNDER ISO 9002 QS 9000 1.54 x 0.83 x 1.10 MANUFACTURED UNDER ISO 9002 QS 9000 1.54 x 1.60 x 1.10 1.54 x 1.21 x 1.10 0.187 QUICK CONNECT/SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS FLAG INDICATOR L.E.D. STATUS LAMP PUSH BUTTON WITH LOCK DOWN DOOR FINGER GRIP COVER I.D. TAG/WRITE LABEL OPTIONAL FLANGE AND DIN ADAPTERS UL LISTED WHEN USED WITH 70-459-1 OR 70-782D-1 SOCKETS 0.187 QUICK CONNECT/ SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS FLAG INDICATOR PUSH BUTTON WITH LOCK DOWN DOOR FINGER GRIP COVER I.D. TAG/WRITE LABEL OPTIONAL FLANGE AND DIN ADAPTERS UL LISTED WHEN USED WITH 70-784D-1 SOCKET 0.187 QUICK CONNECT/SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS FLAG INDICATOR L.E.D. STATUS LAMP PUSH BUTTON WITH LOCK DOWN DOOR FINGER GRIP COVER I.D. TAG/WRITE LABEL OPTIONAL FLANGE AND DIN ADAPTERS UL LISTED WHEN USED WITH 70-783D-1 SOCKET 6, 12, 24, 110 / 120, 220 / 230, 240 6, 12, 24, 48, 110 /125 1.2 0.9 Class B (130C) 6, 12, 24,110 / 120, 220 / 230, 240 6, 12, 24, 48, 110 /125 1.7 1.5 CLASS B (130C) 6, 12, 24,110 / 120, 220 / 230, 240 6, 12, 24, 48, 110 /125 2 1.5 Class B (130C) DPDT Silver alloy, gold flashed 50 15 / 12 120 / 277 12 / 0.5 28 /220 1/2 @ 120 V 1 @ 250 V 3PDT Silver alloy, gold flashed 50 15 / 12 120 / 277 15 / 0.5 28 / 220 1/2 @ 120 V 3/4 @ 250 V 4PDT Silver alloy, gold flashed 50 15 / 12 120 / 277 15 / 0.5 28 / 220 1/2 @ 120 V 3/4 @ 250 V 25 20 25 20 20 20 2500 1000 @ 500 2500 1000 @ 500 2500 100 @ 500 -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 200,000 10,000,000 150,000 10,000,000 150,000 10,000,000 40 36 40 60 40 80 70-783D-1 70-784D-1 70-459-1, 70-782D-1, 70-401-1, 70-402-1 C 784XDX 783XCX US UL Recognized File No. E43641 C 40787 LISTED PAGE 11, 12, 13, 16 C US UL Recognized File No. E43641 40787 PAGE 11, 12, 13, 17 LISTED US UL Recognized File No. E43641 40787 LISTED PAGE 11, 12, 13, 18 9/04 1...3 SOCKET COMPATIBLE & FLANGE MOUNT RELAYS 782XBX1 & 782XDX1 PR ODUCT L XW X MANUFACTURED UNDER ISO 9002 QS 9000 FEATURES FEATURES CONTA CONTACTS Contact Configuration: Contact Material: Contact Resistance (Initial): Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): TIMING Operate Time: Release Time: DIELECTRIC S TRENGTH Coil to Contacts: Insulation Resistance: TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Cover Protection Category: Weight: UNITS 50/60 Hz MANUFACTURED UNDER ISO 9002 QS 9000 1.54 x 0.83 x 1.10 1.54 x 0.83 x 1.10 0.100 QUICK CONNECT/ SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS FLAG INDICATOR L.E.D. STATUS LAMP PUSH BUTTON FINGER GRIP COVER I.D. TAG/WRITE LABEL OPTIONAL FLANGE AND DIN ADAPTERS AVAILABLE UL LISTED WHEN USED WITH 70-461-1 SOCKET 0.100 QUICK CONNECT/ SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS FLAG INDICATOR L.E.D. STATUS LAMP PUSH BUTTON WITH LOCK DOWN DOOR FINGER GRIP COVER I.D. TAG/WRITE LABEL OPTIONAL FLANGE AND DIN ADAPTERS AVAILABLE UL LISTED WHEN USED WITH 70-461-1 SOCKET H (INCHES) COIL Standard Voltage AC: DC: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: 782XBX2 & 782XDX2 6, 12, 24, 110 / 120, 220 / 230, 240 6, 12, 24, 48, 110 /125 1.2 0.9 Class B (130C) 6, 12, 24, 110 / 120, 220 / 230, 240 6, 12, 24, 48, 110 /125 1.2 0.9 Class B (130C) DPDT, 4PDT Silver alloy, gold flashed 50 3 240 3 / 0.25 28 / 220 1/10 @ 240 V DPDT, 4PDT Silver alloy, gold flashed 50 10 / 8.0 120 / 277 8 / 0.25 28 / 220 1/3 @ 120 V 1 @ 277 V ms ms 20 20 20 20 V rms megohms minimum@VDC 1500 100 @ 500 1500 100 @ 500 C C C C C C -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 operations operations 200,000 10,000,000 200,000 10,000,000 IP grams 40 36 40 36 VA W m Ohms A V A V Hp Hp 70-461-1, 70-378-1, 70-379-1 70-461-1, 70-378-1, 70-379-1 MATING MATING SOCKETS SEE SECTION 7 AGENCY GENCY APPR OVALS C 9/04 1...4 PAGE NUMBER C US UL Recognized File No. E43641 40787 LISTED PAGE 11, 19, 20, 21, 22, 23 US UL Recognized File No. E43641 40787 LISTED PAGE 11, 19, 20, 21, 22, 23 SOCKET COMPATIBLE & FLANGE MOUNT RELAYS 782XBX3 & 782XDX3 750 782H CERTIFIED CLASS 1 DIVISION 2 FOR HAZARDOUS LOCATIONS MANUFACTURED UNDER ISO 9001 MANUFACTURED UNDER ISO 9002 QS 9000 1.54 x 0.83 x 1.10 2.280 x 1.37 x 1.39 1.28 x 0.91 x 1.15 0.100 QUICK CONNECT/ SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS FLAG INDICATOR L.E.D. STATUS LAMP PUSH BUTTON WITH LOCK DOWN DOOR FINGER GRIP COVER I.D. TAG/WRITE LABEL OPTIONAL FLANGE AND DIN ADAPTERS AVAILABLE UL LISTED WHEN USED WITH 70-461-1 SOCKET C MANUFACTURED UNDER ISO 9002 QS 9000 8 & 11 PIN OCTAL FLAG INDICATOR L.E.D. STATUS LAMP PUSH BUTTON WITH LOCK DOWN DOOR FINGER GRIP COVER I. D. TAG/WRITE LABEL UL LISTED WHEN USED WITH 70-464-1, 70-465-1, 70-750D8-1 OR 70-750D11-1 SOCKETS 0.100 SOLDER PLUG-IN TERMINALS HERMETICALLY SEALED VACUUM BAKED AND DRY NITROGEN FILLED GRAY LACQUER FINISH OVER STEEL ENCLOSURE MEETS UL STANDARD FOR CLASS 1 DIVISION 2 HAZARDOUS LOCATIONS OPTIONAL TOP OR SIDE STUD MOUNT UL LISTED WHEN USED WITH 70-461-1 SOCKET 6, 12, 24,110 / 120, 220 / 230, 240 6, 12, 24, 48, 110 /125 1.2 0.9 Class B (130C) 6,12, 24, 110 /120, 240 6,12, 24, 48, 110 /125 1.2 0.9 Class B (130C) 6,12, 24, 110 /120, 220/ 240 6,12, 24, 48, 110 /125 2.0 - 3.0 1.4 Class B (130C) DPDT, 4PDT Silver alloy, gold flashed 50 3 240 3 / 0.25 28 / 220 1/16 @ 120 V 4PDT See Table 50 1.0 / 3.0 / 5.0 240 1.0 / 3.0 / 5.0 28 DPDT, 3PDT Silver alloy, gold flashed 50 16 277 16 / 0.5 28 / 220 1/3 @ 120 V 1/2 @ 240 V 20 20 13 6 20 20 1500 100 @ 500 1240 1000 @ 500 2500 1000 @ 500 -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 -40 +50 -40 +65 -40 +105 200,000 10,000,000 100,000 10,000,000 100,000 5,000,000 40 36 67 45 40 89 70-461-1, 70-378-1, 70-379-1 70-461-1, 70-378-1, 70-379-1 US UL Recognized File No. E43641 C 40787 LISTED PAGE 11, 19, 20, 21, 22, 23 70-464-1, 70-465-1, 70-750D8-1, 70-750D11-1 70-750EL, 70-750E, 70-750SL C US UL Recognized 168986 File No. E209950 PAGE 19 - 23 LISTED US UL Recognized File No. E43641 40787 PAGE 11, 24, 25 LISTED 9/04 1...5 SOCKET COMPATIBLE & FLANGE MOUNT RELAYS 788 PR ODUCT L XW X MANUFACTURED UNDER ISO 9002 QS 9000 H (INCHES) CONTA CONTACTS Contact Configuration: Contact Material: Contact Resistance (Initial): Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): TIMING Operate Time: Release Time: DIELECTRIC S TRENGTH Coil to Contacts: Insulation Resistance: TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Cover Protection Category: Weight: MANUFACTURED UNDER ISO 9002 QS 9000 1.90 x 1.53 x 1.40 2.15 x 1.37 x 1.39 SOCKET OR FLANGE MOUNT FLAG INDICATOR L.E.D. STATUS LAMP PUSH BUTTON WITH LOCK DOWN DOOR FINGER GRIP COVER I. D. TAG/WRITE LABEL UL LISTED WHEN USED WITH 70-463-1 SOCKET FEATURES FEATURES COIL Standard Voltage AC: DC: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: A283 UNITS 50/60 Hz SOCKET OR FLANGE MOUNT 0.187 QUICK CONNECT/ SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS UL LISTED WHEN USED WITH 70-463-1 SOCKET 6,12, 24, 110 / 120, 220 / 240 6, 12, 24, 48, 110 / 125 2.0 - 3.0 1.4 Class B (130C) 6, 12, 24, 110 / 120, 220 / 240 6,12, 24, 48, 110 / 125 2.75 2 Class B (130C) m Ohms A V A V Hp Hp DPDT, 3PDT Silver alloy, gold flashed 50 16 277 16 / 0.5 28 / 220 1/3 @ 120 V 1/2 @ 240 V SPST, DPDT, 3PDT Silver alloy, gold flashed 50 15 240 10 28 1/3 @ 120 V 1/2 @ 240 V ms ms 20 20 20 20 V rms megohms minimum@VDC 2500 1000 @ 500 2500 100 @ 500 C C C C C C -40 +50 -40 +65 -40 +105 -30 +60 -30 +50 -30 +100 operations operations 100,000 5,000,000 100,000 10,000,000 IP grams 40 88 40 88 VA W 70-463-1, 70-124-1, 70-124-2, 70-178-1, 70-178-2, 70-788EL, 70-788SL MATING MATING SOCKETS SEE SECTION 7 70-463-1, 70-124-1, 70-124-2, 70-178-1, 70-178-2, 70-788EL, 70-788SL AGENCY GENCY APPR OVALS C US UL Recognized File No. E43641 9/04 1...6 PAGE NUMBER C 40787 LISTED PAGE 11, 26, 27 US UL Recognized File No. E13224 168986 PAGE 28 - 30 LISTED SOCKET COMPATIBLE & FLANGE MOUNT RELAYS A283 DC SWITCHING 388J MANUFACTURED UNDER ISO 9002 QS 9000 1.90 x 1.53 x 1.40 1.90 x 1.53 x 1.40 SOCKET MOUNT OR FLANGE MOUNT ENLARGED 0.240 SILVER ALLOY CONTACTS FOR HIGH CURRENT 0.187 QUICK CONNECT / SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS FLAG INDICATOR PUSH BUTTON UL LISTED WHEN USED WITH 70-463-1 SOCKET SOCKET MOUNT OR FLANGE MOUNT 3mm CONTACT GAP FOR HIGH VOLTAGE SWITCHING 0.187 QUICK CONNECT / SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS 8mm SPACING PUSH BUTTON UL LISTED WHEN USED WITH 70-463-1 SOCKET 6, 12, 24, 110 / 120, 220 / 240 6,12, 24, 48, 110 / 125 2.75 2 Class B (130C) 6, 12, 24, 110 / 120, 220 / 240 6,12, 24, 48, 110 / 125 2.75 2 Class B (130C) 6, 12, 24, 110 / 120, 220 / 240 6,12, 24, 48, 110 / 125 2.75 2 Class B (130C) SPDT, DPDT Silver alloy, gold flashed 50 15 240 1POLE: 10, 2POLE: 3 150, 150 1/3 @ 120 V 1/2 @ 240 V DPDT, 3PDT Silver alloy, gold flashed 50 2POLE: 20 / 3 POLE: 16 300 / 277 20 28 See Table See Table DPDT-NO, 3PDT-NO Silver alloy, gold flashed 50 15 240 15 28 1/3 @ 120 V 1/2 @ 240 V 20 20 20 20 20 20 2000 100 @ 500 2000 100 @ 500 4000 100 @ 500 -30 +65 -30 +50 -30 +100 -30 +65 -30 +50 -30 +100 -30 +65 -30 +50 -30 +100 100,000 5,000,000 100,000 5,000,000 100,000 5,000,000 40 88 40 88 40 88 70-463-1, 70-124-1, 70-124-2, 70-178-1, 70-178-2 70-788EL, 70-788SL 70-463-1, 70-124-1, 70-124-2 , 70-178-1, 70-178-2 70-788EL, 70-788SL 70-463-1, 70-124-1,70-124-2, 70-178-1, 70-178-2 70-788EL, 70-788SL C MANUFACTURED UNDER ISO 9002 QS 9000 MANUFACTURED UNDER ISO 9002 QS 9000 1.90 x 1.53 x 1.40 SOCKET OR FLANGE MOUNT 0.187 QUICK CONNECT/ SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS BLOW OUT MAGNET FOR SWITCHING DC VOLTAGES UL LISTED WHEN USED WITH 70-463-1 SOCKET 388V C US UL Recognized File No. E13224 168986 PAGE 28, 29, 31 LISTED C US UL Recognized File No. E43641 168986 PAGE 32, 33 LISTED US UL Recognized File No. E43641 168986 PAGE 32, 34 LISTED 9/04 1...7 SOCKET COMPATIBLE & FLANGE MOUNT RELAYS 389F 389 PR ODUCT L XW X MANUFACTURED UNDER ISO 9002 QS 9000 H (INCHES) COIL Standard Voltage AC: DC: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: CONTA CONTACTS Contact Configuration: Contact Material: Contact Resistance (Initial): Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): TIMING Operate Time: Release Time: DIELECTRIC S TRENGTH Coil to Contacts: Insulation Resistance: TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Cover Protection Category: Weight: 1.90 x 1.53 x 1.40 FLANGE MOUNT FLAG INDICATOR PUSH BUTTON SWITCHING UP TO 30 AMPS SOCKET MOUNT AVAILABLE FLANGE MOUNT 0.250 QUICK CONNECT/ SOLDER TERMINALS SWITCHING UP TO 30 AMPS SOCKET MOUNT AVAILABLE UNITS 50/60 Hz VA W MANUFACTURED UNDER ISO 9002 QS 9000 MANUFACTURED UNDER ISO 9002 QS 9000 1.90 x 1.53 x 1.40 FEATURES FEATURES 300 6, 12, 24, 110 / 120, 220 / 240 6, 12, 24, 110 / 120, 220 / 240 6,12, 24, 48, 110 / 125 6,12, 24, 48, 110 / 125 3.5 3.5 1.44 1.44 Class B (130C) Class B (130C) 1.90 x 1.53 x 1.40 FLANGE MOUNT 0.250 QUICK CONNECT SOLDER OR PRINTED CIRCUIT TERMINALS VARIETY OF MOUNTING OPTIONS AVAILABLE INCLUDING DIN, FLANGE AND STUD 2 MILLIMETER CONTACT GAP ARC BARRIER BETWEEN POLES OPTIONAL BLOWOUT MAGNET FOR HIGH VOLTAGE DC SWITCHING 6, 12, 24, 110 / 120, 220 / 240 6,12, 24, 48, 110 / 125 3.0 2.0 Class B (130C) or CLass F (155C) m Ohms A V A V Hp Hp DPDT-NO, 3PDT-NO Silver alloy, gold flashed 50 20, 25, 30 See Table See Table See Table See Table See Table DPDT-NO, 3PDT-NO Silver alloy, gold flashed 50 20, 25, 30 See Table See Table See Table See Table See Table DPDT Silver alloy, gold flashed 50 30 / 20 / 15 277 / 480 / 600 30 28 1 @ 120 2 @ 208 -600 ms ms 20 20 20 20 20 15 V rms megohms minimum@VDC 1600 1000 @ 500 1600 1000 @ 500 4000 1000 @ 500 C C C C C C -30 +65 -30 +50 -30 +100 -30 +65 -30 +50 -30 +100 -30 +60 -30 +50 -30 +100 operations operations 100,000 5,000,000 100,000 5,000,000 100,000 10,000,000 IP grams 40 88 40 88 40 85 70-788EL, 70-788SL 70-788EL, 70-788SL MATING MATING SOCKETS SEE SECTION 7 AGENCY GENCY APPR OVALS C US UL Recognized File No. E43641 9/04 1...8 PAGE NUMBER C 168986 PAGE 35 - 37 US UL Recognized 168986 File No. E43641 PAGE 35 - 37 C US UL Recognized File No. E13224 PAGE 38, 39 50758 SOCKET COMPATIBLE & FLANGE MOUNT RELAYS 92 9A 21 / 136 W NE MANUFACTURED UNDER ISO 9001 MANUFACTURED UNDER ISO 9002 QS 9000 1.980 x 1.08 x 1.10 FLANGE MOUNT 0.250 SPADE TERMINALS ON CONTACTS AND 0.187 SPADE TERMINALS ON COIL ACCEPT INSULATED QUICK CONNECT CONNECTORS EPOXY SEALED IMMERSION CLEANABLE 2.70 x 1.36 x 1.495 DIN/ FLANGE MOUNT 0.250 SPADE TERMINALS ON CONTACTS AND 0.187 SPADE TERMINALS ON COIL ACCEPT INSULATED QUICK CONNECT CONNECTORS EPOXY SEALED IMMERSION CLEANABLE 2.84 x 1.85 x 2.47 TRAFFIC SIGNAL FLASH TRANSFER MEETS NEMA STD. TS 2-1992 D. O. T. APPROVED SWITCHES TUNGSTEN LOADS UP TO 20 AMPS MIDTEX 136 ALSO AVAILABLE 24, 120, 240 5, 12, 24, 48, 110 / 125 2.8 1 Class F (155C) 24, 120, 240 5, 12, 24, 48, 110 / 125 4 1.7 Class F (155C) 6, 12, 24, 110 / 120, 220 / 240 6,12, 24, 48, 110 / 125 3.0 2.0 CLASS B (130C) SPST-NO. & SPDT Silver alloy 75 30 240 30 28 1 @ 120 V 2 @ 240 V DPST-NC. & DPDT Silver alloy 75 30 277 20 7 28 1 @ 120 V 2 @ 240 V DPDT Silver alloy 100 30 240 20 28 1 1/2 @ 120 V 2 @ 240 V 20 20 20 20 20 20 2500 100 @ 500 2500 100 @ 500 1500 1000 @ 500 -55 +85 -55 +85 -55 +105 -55 +85 -55 +85 -55 +105 -40 +80 Not Applicable Not Applicable -40 +105 100,000 10,000,000 100,000 5,000,000 200,000 5,000,000 40 33 40 86 40 205 OPTIONAL DIN ADAPTER 16-9A DIN-1 C US 70-TRF-8-1 70-TRB-8-1 C US UL Recognized File No. E43641 UL Recognized File No. E43641 PAGE 40, 41 PAGE 40, 42 C US UL Recognized File No. E43641 PAGE 43 168986 9/04 1...9 SOCKET COMPATIBLE & FLANGE MOUNT RELAYS 67 219 PR ODUCT L XW X MANUFACTURED UNDER ISO 9002 QS 9000 H (INCHES) 1.20 x 0.735 x 0.978 to 1.592 0.100 SOLDER PLUG-IN OR PRINTED CIRCUIT TERMINALS UP TO 6 POLES SWITCHING PLUG-IN STYLES HAVE 3-48 UNC GROUND STUDS . OPTIONAL L 3 AMP BIFURCATED CONTACTS FOR LOW LEVEL FEATURES FEATURES COIL Standard Voltage AC: DC: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: CONTA CONTACTS Contact Configuration: Contact Material: Contact Resistance (Initial): Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): TIMING Operate Time: Release Time: DIELECTRIC S TRENGTH Coil to Contacts: Insulation Resistance: TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Cover Protection Category: Weight: MATING MATING SOCKETS SEE SECTION 7 750H UNITS 50/60 Hz 2.59 x1.468 x 2.625 / 3.062 12 OR 14 PIN WITH LOCKING CLIP WIDE RANGE OF CONTACT CONFIGURATIONS TO 6PST WIDE CHOICE OF OPTIONS OPTIONAL 5 AMP BIFURCATED CONTACTS FOR LOW LEVEL UL LISTED WHEN USED WITH 27390D OR 33377D SOCKET NUCLEAR QUALIFIED VERSIONS AVAILABLE 1.281 x 0.910 x 1.156 8 & 11 PIN OCTAL BASE HERMETICALLY SEALED DRY NITROGEN FILLED GRAY LACQUER FINISH OVER STEEL ENCLOSURE MEETS UL STANDARD FOR CLASS 1 DIVISION 2 HAZARDOUS LOCATIONS UL LISTED WHEN USED WITH 70-464-1 OR 70-465-1 SOCKETS 110 /120 5, 12, 24, 48, 110 / 125 2.75 0.45 Class B (130C) 6, 12, 24, 110 / 120, 220 / 240 6, 12, 24, 48, 110 / 125 1.2 0.9 Class B (130C) 12, 24. 110 / 120 12, 24, 110 / 125 2.0 1.2 Class B (130C) m Ohms A V A V Hp Hp DPST to 6PDT Silver alloy, gold plated 50 5/3 120 / 120 5/3 28 / 28 - to 6PDT Silver alloy, gold diffused 75 10 / 5 120 / 120 10/5 28 / 28 See Table See Table DPDT, 3PDT Silver alloy, gold flashed 100 2 Pole-12, 3 Pole-10 120 / 240 10 30 1/3 @ 120 V 1/2 @ 240 V ms ms 25 20 25 20 10 30 V rms megohms minimum@VDC 1500 1000 @ 500 1500 1000 @ 500 1250 1000 @ 500 C C C C C C -40 +60 -40 +60 -40 +130 -40 +80 -40 +80 -40 +130 -45 +55 -45 +70 -45 +105 operations operations 100,000 10,000,000 100,000 10,000,000 100,000 5,000,000 IP grams 40 22 to 40 40 241 67 130 VA W 70-303-1, 70-305-1, 70-307-1 70-304-1, 70-306-1, 70-308-1 27390D, 33377D 70-464-1, 70-465-1 70-750D8-1, 70-750D11-1 AGENCY GENCY APPR OVALS C US UL Recognized File No. E52197 9/04 1...10 PAGE NUMBER PAGE 44, 45 C US UL Recognized File No. E13224 C 168986 PAGE 46, 47 LISTED US UL Recognized File No. E43641 LISTED PAGE 48, 49 HOW TO CHOOSE A PLUG -IN RELAY 0.830 MAX. (21.0) 0.55 (14) 1 SPDT (XAX) 5 1.10 MAX. (27.9) 9 781 13 14 0.830 MAX. (21.0) 782 15 AMPS PAGE 16 4 5 8 9 12 13 20 AMPS PAGE 14 DPDT (XBX) 1 782 14 20 AMPS PAGE 15 0.830 MAX. (21.0) 1 4 1 4 5 8 5 8 9 12 9 12 13 TYPICAL TERMINAL SIZE IN INCHES: 0.187 X 0.020 (LONG) 1.10 MAX. (27.9) TYPICAL TERMINAL SIZE IN INCHES: 0.110 X 0.020 (SHORT) 782 14 13 UP TO 10 AMPS PAGE 21 14 1.21 (30.8) 2 4 5 6 8 9 10 12 1 3PDT (XCX) 783 15 AMPS PAGE 17 1.10 MAX. (27.9) 14 13 0.830 MAX. (21.0) 1.6 (40.6) 4PDT (XDX) 1 2 3 4 5 6 7 8 9 784 15 AMPS PAGE 18 10 1 2 3 4 5 6 7 8 1.10 MAX. (27.9) 12 11 9 10 11 12 782 14 13 1.37 (34.9) DPDT (XBX) 788 16 AMPS PAGE 27 1.37 (34.9) 1 3 4 6 9 7 6 3 8 1.37 (34.9) 1 2 3 4 5 6 A 750 16 AMPS PAGE 25 B A 8 9 1.39 (35.4) 6 5 7 8 4 3 9 2 16 AMPS PAGE 27 1.39 (35.4) 7 2 1 7 788 5 4 1.39 (35.4) 1.37 (34.9) 3PDT (XCX) 14 13 UP TO 10 AMPS PAGE 21 1 11 10 B PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 1.39 (35.4) 750 16 AMPS PAGE 25 9/04 1...11 700 SERIES ICE CUBE POWER RELAYS F E AT U R E S B E N E F I T S UL Recognized File No. E43641 FLAG INDICATOR: SHOWS RELAY STATUS IN MANUAL OR POWERED CONDITION. 40787 BI - POLAR L.E.D. STATUS LAMP: ALLOWS FOR REVERSE POLARITY APPLICATIONS, SHOWS COIL "ON" OR "OFF" STATUS. IDEAL IN LOW LIGHT CONDITIONS. COLOR CODED PUSH BUTTON: IDENTIFIES AC COILS WITH RED OR DC COILS WITH BLUE PUSH BUTTONS. ALLOWS FOR MANUAL OPERATION OF RELAY WITHOUT THE NEED FOR COIL POWER. IDEAL FOR FIELD SERVICE PERSONNEL TO TEST CONTROL CIRCUITS. LOCK-DOWN DOOR: WHEN ACTIVATED, HOLDS PUSH BUTTON AND CONTACTS IN THE OPERATE POSITION. EXCELLENT FOR ANALYZING CIRCUIT PROBLEMS. LISTED 367G IND. CONT. EQ. FINGER - GRIP COVER: WHEN USED WITH SOCKETS: 781:70-781D-1 782:70-782D-1 70-459-1 70-461-1 783:70-783D-1 784:70-784D-1 ALLOWS OPERATOR TO REMOVE RELAYS FROM SOCKETS MORE EASILY THAN CONVENTIONAL RELAYS. WHITE PLASTIC I.D. TAG/WRITE LABEL: USED FOR IDENTIFICATION OF RELAYS IN MULTI-RELAY CIRCUITS. COVER ADAPTERS: DIN RAIL ADAPTER OR TOP/BOTTOM FLANGE ADAPTER, ALLOWS THE 700 RELAYS TO BE DIRECT MOUNTED TO A DIN RAIL OR PANEL. C US COMPLIES WITH REQUIREMENTS OF * IEC STANDARDS 947-4-1 AND 947-5-1 LOW VOLTAGE DIRECTIVE = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LABORATORIES AS A THIRD PARTY PARTICIPANT C US CURRENT LIMITED TO RATING OF RELAY OR SOCKET WHICHEVER IS LESS 781 SPDT 15 AMPS DIN ADAPTER 16-781C 783 782 3PDT 15 AMPS SPDT 20 AMPS DPDT 15 AMPS DIN ADAPTER 16-782C FLANGE ADAPTER 16-781C1 784 4PDT 15 AMPS DIN ADAPTER 16-783C FLANGE ADAPTER 16-782C1 MANUFACTURED UNDER ISO 9002 & QS 9000 DIN ADAPTER 16-784C FLANGE ADAPTER 16-783C1 FLANGE ADAPTER 16-784C1 OPTIONAL ADAPTERS ORDERED SEPARATELY 9/04 1...12 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 700 SERIES ICE CUBE POWER RELAYS GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: Maximum Coil Dissipation, AC (60 Hz): Maximum Coil Dissipation, DC: Duty: UNITS 781XAX 782XAX 782XBX 783 784 % of nominal % of nominal % of nominal % of nominal % of nominal % VA W 85 80 10 10 110 15 0.9 0.7 Class B (130 C) 2.55 2.3 Continuous 85 80 10 10 110 15 1.2 0.9 Class B (130 C) 2.55 2.3 Continuous 85 80 10 10 110 15 1.2 0.9 Class B (130 C) 2.55 2.3 Continuous 85 80 10 10 110 15 1.5 1.7 Class B (130 C) 3 3.4 Continuous 85 80 10 10 110 15 1.5 2 Class B (130 C) 3 2.3 Continuous Silver alloy, gold flashed 15 277 15 / 0.5 28 / 220 10 @ 240 1/2 @ 120 V 1 @ 250 V B300 AC15 3600 360 100 @ 5 VDC or 0.5 W Silver alloy, gold flashed 20 277 20 / 0.5 28 / 220 Silver alloy, gold flashed 15 / 12 120 / 277 12 / 0.5 28 / 220 Silver alloy, gold flashed 15 / 12 120 / 277 15/ 0.5 28 / 220 Silver alloy, gold flashed 15 / 12 120 / 277 15 / 0.5 28 / 220 1/2 @ 120 V 1 @ 250 V B300 AC15 3600 360 100 @ 5 VDC or 0.5 W 1/2 @ 120 V 1 @ 250 V B300 AC15 3600 360 100 @ 5 VDC or 0.5 W 1/2 @ 120 V 3/4 @ 250 V B300 AC15 3600 360 100 @ 5 VDC or 0.5 W 1/2 @ 120 V 3/4 @ 250 V B300 AC15 3600 360 100 @ 5 VDC or 0.5 W ms ms 20 20 20 20 25 20 25 20 20 20 V rms V rms V rms megohms minimum @ VDC 2500 1500 2500 1500 100 @ 500 100 @ 500 2500 1000 2500 100 @ 500 2500 1000 2500 100 @ 500 2500 1000 2500 100 @ 500 VA W CONTA CONTACTS Contact Material: Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: General Purpose Rating (75%-80% pf): Horse Power (AC): Horse Power (AC): Pilot Duty (60 Hz): Utilization Category: VA Rating Make: VA Rating Break: Minimum Recommended Load: TIMING Operate Time: Release Time: DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Insulation Resistance: VIBR ATION RESIS TANCE Functional: A V A V A@V HP HP IEC VA VA ma gs 10-55 Hz, 6 gs,1mm 10-55 Hz, 6gs 1mm 10-55 Hz, 6gs 1mm 10-55 Hz, 6gs 1mm 10-55 Hz, 6gs1mm double amplitude double amplitude double amplitude double amplitude double amplitude SHOCK RESIS TANCE Functional: gs 10 10 10 10 10 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): operations 100,000 200,000 150,000 150,000 Mechanical @ no Load : operations 15 A: 100,000 20 A: 50,000 10,000,000 10,000,000 10,000,000 10,000,000 10,000,000 MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: 94V-0 94V-0 IP Inch (mm) Weight: grams Any Any Any Any Any Molded plastic Molded plastic Molded plastic Molded plastic Molded plastic Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate 40 40 40 40 40 0.187, 0.1, 0.08 x 0.020 0.187, 0.08 x 0.020 0.187, 0.08 x 0.020 0.187, 0.08 x 0.020 0.187, 0.08 x 0.020 (4.47, 2.54, 2.03 x 0.508) (4.47, 2.03 x 0.508) (4.47, 2.03 x 0.508) (4.47, 2.03 x 0.508) (4.47, 2.03 x 0.508) 80 36 36 60 29 9/04 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 1...13 781 - 1 POLE ICE CUBE POWER RELAY SPDT, 15 AMPS WIRING DIAGRAM (VIEWED FROM PIN END) (12) 1 (14) 5 (11) (A1) 9 OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). Plain Cover With Flag & Optional Push Button Orange Flag Indicator QUICK CONNECT SOLDER / PLUG-IN TERMINALS PRINTED CIRCUIT TERMINALS PRINTED CIRCUIT MOUNTING HOLE LAYOUT ( TOP VIEW ) Clear Window 0.53 (13.4) 0.55 (14) 1 Push button Orange Flag Indicator Standard Cover 0.18 (4.7) 5 1.10 MAX. (27.9) 1.06 (26.9) 0.23 (5.9) 9 13 0.25 (6.6) 14 0.17 (4.4) Frosted Panel Green BI-Polar L. E. D. Status Lamp 14 ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE 1.6 MAX. (40.6) Standard Cover 1.40 MAX. (35.5) (A2) 13 0.10 (2.54) DIA. 5 Holes Plastic I.D. Tag/ Write Label ORDERING CODE 781 XAX ML -120A ALSO UL RATED 20 AMPS @ 277/28 DC - 50,000 OPERATIONS CLASS: Mating Sockets 70-781D-1: SCREW/DIN, 70-781F-1: SOLDER, 70-781T-1: PRINTED CIRCUIT See section 7 CONTACT CONFIGURATION: SPDT: XAX OPTIONAL PLAIN COVER: CODE C TERMINAL STYLE: QUICK CONNECT SOLDER / PLUG-IN TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T FULL FEATURED VERSION: PUSH BUTTON : CODE M BI - POLAR L.E.D. STATUS LAMP: CODE L OPTIONAL PLAIN COVER FEATURES: PUSH BUTTON : CODE M POLARIZED L.E.D. STATUS LAMP: CODE L (OBSERVE POLARITY ) COIL VOLTAGE: 6, 12, 24, 120, 220/230, 240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS 9/04 1...14 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com COIL MEASURED @ 25 C FULL FEATURED PLAIN COVER WITH FLAG AC OPERATED - SOLDER/PLUG-IN, 781XAXML-24A 781XAXC-24A 781XAXML-120A 781XAXC-120A 781XAXML-220/230A 781XAXML-240A DC OPERATED - SOLDER/PLUG-IN, 781XAXML-12D 781XAXML-24D 781XAXC-24D 781XAXML-110D NOMINAL NOMINAL INPUT RESISTANCE VOLTAGE (OHMS) 15 AMP 24 VAC, 50/60Hz 160 W 110/120 VAC, 50/60Hz 4,430 W 220/230 VAC, 50/60HZ 15,720 W 240 VAC, 50/60HZ 15,720 W 15 AMP 12 VDC 180 W 24 VDC 750 W 110/125 VDC 13,800 W AC OPERATED - PRINTED CIRCUIT, 15 AMP 110/120 VAC, 50/60Hz 781XAXTML-120A DC OPERATED - PRINTED CIRCUIT, 15 AMP 781XAXTML-12D 781XAXTML-24D 12 VDC 24 VDC RETROFITS IDEC RH1B- & RH1V2-. SEE END OF SECTION 1 FOR CROSS REFERENCE CADMIUM-FREE CONTACTS AVAILABLE, CONTACT FACTORY FOR DETAILS 4,430 W 188 W 750 W 782/78 - 1 POLE ICE CUBE POWER RELAY SPDT, 20 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). Class 78 Plain Cover With Flag Orange Flag Indicator WIRING DIAGRAM (VIEWED FROM PIN END) 1 4 (42) (14) 5 8 (44) 9 12 (41) (12) QUICK CONNECT SOLDER / PLUG-IN TERMINALS PRINTED CIRCUIT TERMINALS (11) (A1)13 1.40 MAX. (35.5) Standard Cover Push Button & Lock-Down Door Standard Cover ( TOP VIEW ) 0.83 MAX. (21.08) Clear Window Orange Flag Indicator 1.10 MAX. (27.9) 1.06 (26.9) 1 2 3 4 5 6 7 Green BI-Polar L. E. D. Status Lamp ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE PRINTED CIRCUIT MOUNTING HOLE LAYOUT 1.54 MAX. (39.1) 0.56 (14.2) 0.70 0.52 (17.7) (13.2) 0.28 (7.11) 8 0.10 (2.54) DIA. 8 Holes 0.39 (9.91) Frosted Panel 14(A2) Plastic I.D Tag/Write Label Mating Sockets 70-782D-1, 70-459-1: SCREW/DIN SOLDER 70-402-1: PRINTED CIRCUIT 70-401-1: SOLDER TERMINAL See section 7 ORDERING CODE 782 XAX M4L -120A CLASS: CONTACT CONFIGURATION: SPDT: XAX OPTIONAL PLAIN COVER: CODE C TERMINAL STYLE: QUICK CONNECTSOLDER/ PLUG-IN TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T FULL FEATURED VERSION: PUSH BUTTON & LOCK-DOWN DOOR: CODE M4 BI - POLAR L.E.D. STATUS LAMP: CODE L OPTIONAL FULL FEATURED DELETION: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M OPTIONAL PLAIN COVER FEATURES: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M POLARIZED L.E.D. STATUS LAMP: CODE L (OBSERVE POLARITY ) COIL VOLTAGE: 6, 12, 24, 120, 220/230, 240 ADD A FOR AC COILS 6, 12, 24 ,48, 110 ADD D FOR DC COILS PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com STANDARD PART NUMBERS FULL FEATURED PLAIN COVER WITH FLAG AC OPERATED SOLDER/PLUG -IN, 20 AMP COIL MEASURED @ 25 C NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) DUAL MARKED NEW PART NUMBER SUPERCEDES W78ARCSX-108 12 VAC, 50/60Hz 782XAXM4L-12A 782XAXC-12A W78ARCSX-109 24 VAC, 50/60Hz 782XAXM4L-24A 782XAXC-24A 782XAXM4L-120A 782XAXC-120A W78ARCSX-111 110/120 VAC,50/60Hz 220/230VAC,50/60Hz 782XAXM4L-220/230A 782XAXC-220/230A 782XAXM4L-240A 782XAXC-240A W78ARCSX-112 240 VAC, 50/60HZ DC OPERATED SOLDER/PLUG -IN, 20 AMP 12 VDC W78RCSX-97 782XAXM4L-12D 782XAXC-12D 24 VDC W78RCSX-98 782XAXM4L-24D 782XAXC-24D 110/125 VDC 782XAXM4L-110D 782XAXC-110D W78RCSX-100 AC OPERATED SOLDER/PLUG -IN, 20 AMP WITH STATUS LED LAMP 24 VAC, 50/60Hz 782XAXCL-24A W78ARNCSX-8 782XAXCL-120A W78ARNCSX-9 110/120 VAC,50/60Hz 782XAXCL-240A W78ARNCSX-10 240 VAC, 50/60HZ DC OPERATED SOLDER/PLUG -IN, 20 AMP WITH STATUS LED LAMP 24 VDC 782XAXCL-24D W78RNCSX-10 AC OPERATED PRINTED CIRCUIT TERMINALS, 20 AMP 12 VAC, 50/60Hz 782XAXTM4L-12A 782XAXCT-12A W78ARPCX-81 24 VAC, 50/60Hz 782XAXTM4L-24A 782XAXCT-24A W78ARPCX-82 782XAXTM4L-120A 782XAXCT-120A W78ARPCX-84 110/120 VAC,50/60Hz DC OPERATED PRINTED CIRCUIT TERMINALS, 20 AMP 12 VDC 782XAXTM4L-12D 782XAXCT-12D W78RPCX-79 24 VDC 782XAXTM4L-24D 782XAXCT-24D W78RPCX-83 110 /125 VDC 782XAXTM4L-110D 782XAXCT-110D W78RPCX-85 46 180 4,430 15,000 15,700 W W W W W 160 W 650 W 13,800 W 180 W 4,430 W 15,700 W 650 W 46 W 180 W 4,430 W 160 W 650 W 13,800 W NOTE: CLASS 782C IS AN ENHANCED VERSION OF THE 78, IT HAS SUPERIOR RATINGS, A FLAG INDICATOR, & DISPLAYS BOTH PART NUMBERS. 9/04 1...15 782/78 - 2 POLE ICE CUBE POWER RELAYS DPDT, 15 AMPS WIRING DIAGRAM (VIEWED FROM PIN END) Class 782 Plain Cover With Flag 1 4 (42) (14) (14) 5 8 (44) 9 12 (41) (12) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). Orange Flag Indicator QUICK CONNECT SOLDER / PLUG-IN TERMINALS (11) PRINTED CIRCUIT TERMINALS (A2) (A1) 13 1.40 MAX. (35.5) Standard Cover Push Button & Lock-Down Door Standard Cover ( TOP VIEW ) 0.83 MAX. (21.0) Clear Window Orange Flag Indicator 1.10 MAX. (27.9) 1.06 (26.9) 1 2 3 4 5 6 7 Green BI-Polar L. E. D. Status Lamp ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE PRINTED CIRCUIT MOUNTING HOLE LAYOUT 1.54 MAX. (39.1) 14 0.56 (14.2) 0.70 0.52 (17.7) (13.2) 0.28 (7.11) 8 0.39 (9.91) Frosted Panel 0.10 (2.54) DIA. 8 Holes Plastic I.D Tag/Write Label ORDERING CODE 782 XBX M4L -120A CLASS: Mating Sockets 70-782D-1, 70-459-1: SCREW/DIN 70-402-1: PRINTED CIRCUIT 70-401-1: SOLDER TERMINAL See section 7 CONTACT CONFIGURATION: DPDT: XBX OPTIONAL PLAIN COVER: CODE C TERMINAL STYLE: QUICK CONNECTSOLDER/ PLUG-IN TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T FULL FEATURED VERSION: PUSH BUTTON & LOCK-DOWN DOOR: CODE M4 BI - POLAR L.E.D. STATUS LAMP: CODE L OPTIONAL FULL FEATURED DELETION: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M OPTIONAL PLAIN COVER FEATURES: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M POLARIZED L.E.D. STATUS LAMP: CODE L (OBSERVE POLARITY ) COIL VOLTAGE: 6, 12, 24, 120, 220/230, 240 ADD A FOR AC COILS 6, 12, 24 ,48, 110 ADD D FOR DC COILS 9/04 1...16 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com STANDARD PART NUMBERS FULL FEATURED PLAIN COVER WITH FLAG SOLDER/PLUG -IN, 15 AMP COIL MEASURED @ 25C NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) DUAL MARKED NEW PART NUMBER SUPERCEDES 6 VAC, 50/60Hz W78ARCSX-7 782XBXC-6A 24 VAC, 50/60Hz 782XBXC-24A W78ARCSX-9 782XBXM4L-24A 782XBXM4L-120A 782XBXC-120A W78ARCSX-11 110/120 VAC, 50/60Hz 220/230 VAC, 50/60Hz 782XBXM4L-220/230A 782XBXM4L-240A 782XBXC-240A W78ARCSX-12 240 VAC, 50/60Hz 6 VDC W78RCSX-6 782XBXC-6D 12 VDC W78RCSX-7 782XBXC-12D 782XBXM4L-12D 24 VDC W78RCSX-8 782XBXC-24D 782XBXM4L-24D 48 VDC W78RCSX-9 782XBXC-48D 110/125 VDC 782XBXM4L-110D 782XBXC-110D W78RCSX-10 PRINTED CIRCUIT, 15 AMP 24 VAC, 50/60Hz 782XBXCT-24A W78ARPCX-3 782XBXCT-120A W78ARPCX-6 110/120 VAC, 50/60Hz 6 VDC W78RPCX-1 782XBXCT-6D 12 VDC 782XBXCT-12D W78RPCX-2 24 VDC 782XBXCT-24D W78RPCX-3 9.6 180 4,430 15,000 15,700 40 160 650 2600 11,000 W W W W W W W W W W 180 4,430 40 160 650 W W W W W NOTE: CLASS 782C IS AN ENHANCED VERSION OF THE 78, IT HAS SUPERIOR RATINGS, A FLAG INDICATOR, & DISPLAYS BOTH PART NUMBERS. 783 - 3 POLE ICE CUBE POWER RELAY 3PDT, 15 AMPS WIRING DIAGRAM (VIEWED FROM PIN END) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). Plain Cover With Flag & Optional Push Button Orange Flag Indicator QUICK CONNECT SOLDER / PLUG-IN TERMINALS (12) 1 2 (22) 4 (42) (14) 5 6(24) 8 (44) (11) PRINTED CIRCUIT TERMINALS (21)10 9 (41)12 (A1) (A2) 13 1.40 MAX. (35.56) ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE 1.54 MAX. (39.11) Standard Cover Push Button & Lock-Down Door PRINTED CIRCUIT MOUNTING HOLE LAYOUT ( TOP VIEW ) Clear Window 1.21 (30.8) Orange Flag Indicator Standard Cover 0.39 (9.90) 1 2 4 5 6 8 9 10 12 1.10 MAX. (27.9) 1.06 (26.9) Green BI-Polar L. E. D. Status Lamp 14 13 Plastic I.D. Tag/Write Label 0.18 (4.69) 0.23 (5.84) 14 0.21 (5.33) Frosted Panels 0.15 (3.93) 0.26 (6.65) 0.39 (9.90) 0.10 (2.54) DIA. 11 Holes 0.78 (19.9) ORDERING CODE 783 XCX M4L -120A CLASS: CONTACT CONFIGURATION: 3PDT: XCX Mating Socket 70-783D-1: SCREW/DIN See section 7 OPTIONAL PLAIN COVER: CODE C TERMINAL STYLE: QUICK CONNECT SOLDER / PLUG-IN TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T FULL FEATURED VERSION: PUSH BUTTON & LOCK-DOWN DOOR: CODE M4 BI - POLAR L.E.D. STATUS LAMP: CODE L OPTIONAL FULL FEATURED DELETION: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M OPTIONAL PLAIN COVER FEATURES: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M POLARIZED L.E.D. STATUS LAMP: CODE L (OBSERVE POLARITY ) COIL VOLTAGE: 6, 12, 24, 120, 220/230, 240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com COIL MEASURED @ 25 C FULL FEATURED PLAIN COVER WITH FLAG NOMINAL INPUT VOLTAGE AC OPERATED - SOLDER/PLUG-IN, 15 AMP 24 VAC, 50/60 Hz 783XCXM4L-24A 783XCXC-24A 783XCXM4L-120A 783XCXC-120A 110/120 VAC, 50/60 Hz 220/230 VAC, 50/60 Hz 783XCXM4L-220/230A 240 VAC, 50/60 Hz 783XCXM4L-240A DC OPERATED - SOLDER/PLUG-IN, 15 AMP 12 VDC 783XCXM4L-12D 24 VDC 783XCXM4L-24D 783XCXC-24D 110/125 VDC 783XCXM4L-110D AC OPERATED - PRINTED CIRCUIT, 15 AMP 110/120 VAC, 50/60 Hz 783XCXTM4L-120A DC OPERATED - PRINTED CIRCUIT, 15 AMP 12 VDC 783XCXTM4L-12D 24 VDC 783XCXTM4L-24D RETROFITS IDEC RH3B- & RH3V2-. SEE END OF SECTION 1 FOR CROSS REFERENCE NOMINAL RESISTANCE (OHMS) 103 W 2770 W 12,000 W 12,000 W 100 W 400 W 8600 W 2770 W 100 W 400 W 9/04 1...17 784 - 4 POLE ICE CUBE POWER RELAY 4PDT, 15 AMPS WIRING DIAGRAM (VIEWED FROM PIN END) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). Plain Cover With Flag & Optional Push Button Orange Flag Indicator QUICK CONNECT SOLDER / PLUG-IN TERMINALS 1 (12) 2 (22) 3 (32) 4 (42) 5 (14) 7 (34) 8(44) 6 (24) 9 (11) 10(21) 11 (31) 12(41) PRINTED CIRCUIT TERMINALS 13 (A1) 14 (A2) ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE 1.40 MAX. (35.5) PRINTED CIRCUIT MOUNTING HOLE LAYOUT 1.54 MAX. (39.1) Standard Cover Push Button & Lock-Down Door ( TOP VIEW ) Clear Window Orange Flag Indicator 1.10 MAX. (27.9) Standard Cover 1.06 (27.05) Plastic I.D. Tag/Write Label Green BI-Polar L. E. D. Status Lamp 1 2 3 4 5 6 7 8 9 10 11 12 13 0.15 (3.93) 0.18 (4.69) 0.23 (5.84) 14 0.21 (5.33) Frosted Panels 0.39 (9.90) 0.39 (9.90) 1.60 MAX. (40.6) 0.26 (6.65) 0.39 (9.90) 0.10 (2.54) DIA. 14 Holes 1.18 (29.9) ORDERING CODE 784 XDX M4L -120A CLASS: CONTACT CONFIGURATION: 4PDT: XDX OPTIONAL PLAIN COVER: CODE C TERMINAL STYLE: QUICK CONNECT SOLDER / PLUG-IN TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T FULL FEATURED VERSION: PUSH BUTTON & LOCK-DOWN DOOR: CODE M4 BI - POLAR L.E.D. STATUS LAMP: CODE L OPTIONAL FULL FEATURED DELETION: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M OPTIONAL PLAIN COVER FEATURES: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M POLARIZED L.E.D. STATUS LAMP: CODE L (OBSERVE POLARITY ) COIL VOLTAGE: 6, 12, 24, 120, 220/230, 240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS 9/04 1...18 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com Mating Socket 70-784D-1: SCREW/DIN See section 7 COIL MEASURED @ 25 C FULL FEATURED PLAIN COVER WITH FLAG NOMINAL INPUT VOLTAGE AC OPERATED - SOLDER/PLUG-IN, 15 AMP 784XDXM4L-24A 24 VAC, 50/60 Hz 784XDXC-24A 784XDXM4L-120A 784XDXC-120A 110/120 VAC, 50/60 Hz 784XDXM4L-220/230A 220/230 VAC, 50/60 Hz 784XDXM4L-240A 240 VAC, 50/60 Hz DC OPERATED - SOLDER/PLUG-IN, 15 AMP 784XDXM4L-12D 12 VDC 784XDXM4L-24D 24 VDC 784XDXC-24D 784XDXM4L-110D 110/125 VDC AC OPERATED - PRINTED CIRCUIT, 15 AMP 784XDXTM4L-120A 110/120 VAC, 50/60 Hz DC OPERATED - PRINTED CIRCUIT, 15 AMP 784XDXTM4L-12D 784XDXTM4L-24D RETROFITS IDEC RH4B- & RH4V2-. SEE END OF SECTION 1 FOR CROSS REFERENCE 12 VDC 24 VDC NOMINAL RESISTANCE (OHMS) 84.5 2220 9120 9120 W W W W 96 W 388 W 7340 W 2220 W 96 W 388 W 782 ICE CUBE CONTROL RELAYS B E N E F I T S F E AT U R E S C US UL Recognized File No. E43641(782) E209950 (782H) FLAG INDICATOR: SHOWS RELAY STATUS IN MANUAL OR POWERED CONDITION. BI - POLAR L.E.D. STATUS LAMP: ALLOWS FOR REVERSE POLARITY APPLICATIONS, SHOWS COIL "ON" OR "OFF" STATUS. IDEAL IN LOW LIGHT CONDITIONS. COLOR CODED PUSH BUTTON: IDENTIFIES AC COILS WITH RED OR DC COILS WITH BLUE PUSH BUTTONS. ALLOWS FOR MANUAL OPERATION OF RELAY WITHOUT THE NEED FOR COIL POWER. IDEAL FOR FIELD SERVICE PERSONNEL TO TEST CONTROL CIRCUITS. LOCK-DOWN DOOR: WHEN ACTIVATED, HOLDS PUSH BUTTON AND CONTACTS IN THE OPERATE POSITION. EXCELLENT FOR ANALYZING CIRCUIT PROBLEMS. 168986 COMPLIES WITH REQUIREMENTS OF * IEC STANDARDS 947-4-1 AND 947-5-1 LOW VOLTAGE DIRECTIVE = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LABORATORIES AS A THIRD PARTY PARTICIPANT C US FINGER - GRIP COVER: ALLOWS OPERATOR TO REMOVE RELAYS FROM SOCKETS MORE EASILY THAN CONVENTIONAL RELAYS. WHITE PLASTIC I.D. TAG/WRITE LABEL: USED FOR IDENTIFICATION OF RELAYS IN MULTI-RELAY CIRCUITS. COVER ADAPTERS: DIN RAIL ADAPTER OR TOP/BOTTOM FLANGE ADAPTER, ALLOWS THE 700 RELAYS TO BE DIRECT MOUNTED TO A DIN RAIL OR PANEL. VACUUM BAKED & DRY NITROGEN FILLED (782H): REMOVES CONTAMINANTS AND PROVIDES A CLEAN & DRY ATMOSPHERE FOR CONTACTS. HERMETICALLY SEALED METAL ENCLOSURE (782H): IDEAL FOR USE IN HAZARDOUS LOCATIONS. UL CERTIFIED FOR CLASS 1 DIVISION 2 GROUP A, B, C & D HAZARDS. WHEN RELAY IS USED WITH 70-461-1 SOCKET, THE HOLD-DOWN CLIP 16-1328 IS REQUIRED. PLUG-IN STYLE OR SIDE MOUNTING STUD WITH ANTI- ROTATION TAB: WHEN USED WITH 70-461-1 SOCKET THE 782H CAN BE DIN RAIL MOUNTED OR PANEL MOUNTED. THE SIDE STUD PROVIDES FOR DIRECT MOUNT & SOLDERED WIRE APPLICATIONS. LISTED 367G IND. CONT. EQ. WHEN USED WITH SOCKETS: 782: 70-461-1 CURRENT LIMITED TO RATING OF RELAY OR SOCKET WHICHEVER IS LESS MANUFACTURED UNDER ISO 9002 & QS 9000 UL RATINGS FOR 782 HERMETICALLY SEALED CONTACT CONFIGURATION 4PDT CURRENT OR HORSE POWER LOAD VOLTAGE LOAD VOLTAGE FREQUENCY TYPE OF LOAD MINIMUM LOAD 1 AMP 120/240 50/60 Hz RESISTIVE DRY CIRCUIT 3 AMP 120/240 50/60 Hz RESISTIVE 100 mA 12 VAC 5 AMP 120/240 50/60 Hz RESISTIVE 500 mA 12 VAC 1 AMP 30 DC RESISTIVE 50 mA 5 VAC 3 AMP 30 DC RESISTIVE 100 mA 12 VDC 5 AMP 30 DC RESISTIVE 500 mA 12 VDC 9/04 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 1...19 782 ICE CUBE CONTROL RELAYS GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: Maximum Coil Dissipation, AC (60 Hz): Maximum Coil Dissipation, DC: Duty: UNITS 782XBX1/782XDX1 782XBX2/782XDX2 782XBX3/782XDX3 782H % of nominal % of nominal % of nominal % of nominal % of nominal % VA W 85 80 10 10 110 15 1.2 0.9 Class B (130 C) 2.55 2.3 Continuous 85 80 10 10 110 15 1.2 0.9 Class B (130 C) 2.55 2.3 Continuous 85 80 10 10 110 15 1.2 0.9 Class B (130C) 2.55 2.3 Continuous 85 80 10 10 110 15 1.2 0.9 Class B (130C) 2.5 2 Continuous Silver alloy, gold flashed Silver alloy, gold flashed Silver alloy, gold flashed 3 120 / 240 3 / 0.25 28 / 220 1/10 @ 120 V 1/10 @ 240 V B300 AC15 1800 180 100 @ 5 VDC or 0.5 W 10 / 8.0 110/120 - 220/277 8 / 0.25 28 / 220 1/3 @ 120 V 1 @ 277 V B300 AC15 3600 360 100 @ 5 VDC or 0.5 W 3 120 /240 3 / 0.25 28 / 220 1/16 @ 120 V Silver,gold plated,silver,gold flashed, silver alloy, gold, flashed, gold,silver,nickel 1.0 / 3.0 / 5.0 120 / 240 1.0 / 3.0 / 5.0 28 VA W CONTA CONTACTS Contact Material: A V A V HP HP Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): Pilot Duty (60 Hz): Utilization Category: VA Rating Make: VA Rating Break: Minimum Recommended Load: IEC VA VA ma TIMING Operate Time: Release Time: ms ms 20 20 20 20 20 20 13 6 V rms V rms V rms V rms megohms minimum @VDC 1500 1000 1500 1500 1000 1500 1500 1000 1500 100 @ 500 100 @ 500 100 @ 500 1240 500 1240 1240 100 @ 500 gs SHOCK RESIS TANCE Functional: 10-55 Hz, 6 gs,1 mm double amplitude 10-55 Hz, 6 gs,1 mm double amplitude 10-55 Hz, 6 gs,1 mm double amplitude 10-55 Hz, 6 gs,1 mm double amplitude gs 10 10 10 10 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 -40 +70 -40 +70 -40 +105 LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : operations operations 200,000 10,000,000 200,000 10,000,000 200,000 10,000,000 100,000 10,000,000 MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: 94V-0 94V-0 IP Inch (mm) Any Molded plastic Polycarbonate 40 0.10 x 0.020 (2.54 x 0.508) 0.040 x 0.020 (1.016 x 0.508) 36 Any Molded plastic Polycarbonate 40 0.10 x 0.020 (2.54 x 0.508) 0.040 x 0.020 (1.016 x 0.508) 36 Any Molded plastic Polycarbonate 40 0.10 x 0.020 (2.54 x 0.508) 0.040 x 0.020 (1.016 x 0.508) 36 Any Molded plastic Steel 67 0.10 x 0.020 (2.54 x 0.508) DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: VIBR ATION RESIS TANCE Functional: Weight: grams B300 AC15 1800 180 50 @ 5 VDC or 0.5 W 9/04 1...20 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com AC15 1800 180 50/100 @ 5 VDC or 50 mw / 0.5 W 45 782 - 2 & 4 POLE ICE CUBE CONTROL RELAYS DPDT & 4PDT 1, 3, 5 & 10 AMPS WIRING DIAGRAM (VIEWED FROM PIN END) 1 4 (42) (14) (14) 5 8 (44) (12) (11) 9 12 (41) (A1)13 14 (A2) DPDT OUTLINE DIMENSIONS QUICK CONNECT SOLDER / PLUG-IN TERMINALS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 782 Plain Cover 1(12) 2 (22) 3 (32) 4 (42) 5(14) 6(24) 7(34) 8(44) 9(11) 10 (21) 11 (31) 12(41) PRINTED CIRCUIT TERMINALS 13 (A1) 14 (A2) 4PDT Orange Flag Indicator ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE PRINTED CIRCUIT MOUNTING HOLE LAYOUT 1.54 MAX. (39.4) 1.40 MAX. (35.5) ( TOP VIEW ) Standard Cover Push Button & Lock-Down Door Clear Window 0.83 MAX. (21.0) Orange Flag Indicator 1.06 Standard (26.9) Cover 1.10 MAX. (27.9) 3 4 1 4 7 8 5 8 9 10 11 12 9 12 13 14 14 0.66 0.50 (16.7) (12.7) 0.25 (6.35) 0.17 (4.32) Frosted Panel Plastic I.D. Tag/Write Label 0.05 DIA. (1.27) 14 HOLES SOLDER / PLUG-IN TERMINALS CERTIFIED CLASS 1 DIVISION 2 FOR HAZARDOUS 0.31 (7.92) LOCATIONS LONG # 3 - 48 THREAD 782H 0.24 (6.12) 1 2 5 6 13 Green BI-Polar L. E. D. Status Lamp 0.52 (13.2) 0.46 REF. (11.6) OPTIONAL CODE 2 MOUNTING STUD WITH ANTI-ROTATION TAB 0.04 x 0.08 (1.1 x 2.1) SOLDER HOLE # 6 - 32 THREAD 1.15 MAX. (29.3) 1. 2 8 M A X . (32.5) 0.91 MAX. (23.1) 9/04 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 1...21 782 - 2 & 4 POLE ICE CUBE CONTROL RELAYS DPDT & 4PDT, 1, 3, 5 & 10 AMPS ORDERING CODE 782 XDX CLASS: CONTACT CONFIGURATION: DPDT: XBX, 4PDT: XDX CONTACT RATING (EXCEPT 782H): 3 AMP: CODE 1 10 AMP: CODE 2 3 AMP BIFURCATED CONTACT: CODE 3 HERMETICALLY SEALED (782H): CODE H OPTIONAL PLAIN COVER (EXCEPT 782H): CODE C TERMINALS STYLE (EXCEPT 782H): QUICK CONNECT SOLDER/PLUG-IN TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T CONTACT RATING (782H ONLY): 1 AMP BIFURCATED CONTACT: CODE 32 (SILVER CROSS BAR WITH GOLD OVERLAY) 3 AMP: CODE 10 (SILVER GOLD FLASHED) 5 AMP: CODE 21 (SILVER ALLOY) TERMINALS & MOUNTING STYLE (782H ONLY): SOLDER/PLUG-IN: NO CODE STUD ON BROAD SIDE: CODE 2 STUD ON NARROW SIDE: CODE 3 STUD ON TOP SIDE: CODE 4 FULL FEATURED VERSION: PUSH BUTTON & LOCK-DOWN DOOR: CODE M4 BI - POLAR L.E.D. STATUS LAMP: CODE L OPTIONAL FULL FEATURED DELETION: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M OPTIONAL PLAIN COVER FEATURES: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M POLARIZED L.E.D. STATUS LAMP: CODE L (OBSERVE POLARITY ) COIL VOLTAGE: 6, 12, 24, 120, 220/230, 240 ADD A FOR AC COILS 6, 12, 24 ,48, 110 ADD D FOR DC COILS 9/04 1...22 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 2 M4L -120A 782 - 2 & 4 POLE ICE CUBE CONTROL RELAY DPDT & 4PDT, 1, 3, 5 & 10 AMPS OPTIONAL ADAPTERS ORDERED SEPARATELY DIN ADAPTER 16-782C FLANGE ADAPTER 16-782C1 Mating Sockets 70-461-1, SCREW/DIN 70-378-1: SOLDER 70-379-1: PRINTED CIRCUIT See section 7 COIL MEASURED @ 25 C STANDARD PART NUMBERS FULL FEATURED PLAIN COVER WITH FLAG HERMETICALLY SEALED 4PDT FULL FEATURED DPDT NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) SOLDER/PLUG -IN, BIFURCATED CONTACTS 3 AMP DUAL MARKED NEW PART NUMBER 782XDX3C-12A 782XDX3C-24A 782XDX3M4L-24A 782XDX3C-120A 782XDX3M4L-120A 782XDX3M4L-220/230A 782XDX3C-220/230A 782XDX3C-240A 782XDX3M4L-240A 782XDX3C-6D 782XDX3C-12D 782XDX3M4L-12D 782XDX3C-24D 782XDX3M4L-24D 782XDX3C-110D 782XDX3M4L-110D SOLDER/PLUG -IN, CONTACTS 3 AMP 782XDX1C-12A 782XDX1C-24A 782XDX1M4L-24A 782XDX1C-120A 782XDX1M4L-120A 782XDX1M4L-220/230A 782XDX1C-220/230A 782XDX1C-240A 782XDX1M4L-240A 782XDX1C-6D 782XDX1C-12D 782XDX1M4L-12D 782XDX1C-24D 782XDX1M4L-24D 782XDX1C-110D 782XDX1M4L-110D SOLDER/PLUG -IN, CONTACTS 10 AMP SUPERCEDES W78ATCSX-2 W78ATCSX-3 W78ATCSX-5 782XBX3M4L-24A 782XBX3M4L-120A 782XBX3M4L-220/230A 782XBX3M4L-240A W78ATCSX-6 W78TCSX-1 W78TCSX-2 W78TCSX-3 W78TCSX-5 782XBX3M4L-12D 782XBX3M4L-24D 782XBX3M4L-110D W78ACSX-2 W78ACSX-3 W78ACSX-5 782XDXH10-24A 782XDXH10-120A W78ACSX-6 W78CSX-1 W78CSX-2 W78CSX-3 W78CSX-6 782XDXH10-12D 782XDXH10-24D 782XDXH10-110D 782XDX2C-24A 782XDX2M4L-24A W78KACSX-15 782XDX2C-120A 782XDX2M4L-120A W78KACSX-17 782XDX2M4L-220/230A 782XDX2C-220/230A 782XDX2C-240A 782XDX2M4L-240A W78KACSX-18 782XDX2C-12D 782XDX2M4L-12D W78KCSX-12 782XDX2C-24D 782XDX2M4L-24D W78KCSX-13 782XDX2C-110D 782XDX2M4L-110D PRINTED CIRCUIT BIFURCATED CONTACTS 3 AMP 782XDX3CT-24A W78APCX-3 782XDX3CT-120A W78APCX-5 782XDX3CT-12D W78PCX-2 782XDX3CT-24D W78PCX-3 782XDX3CT-110D W78PCX-6 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 782XDXH21-120A 782XDXH21-12D 782XDXH21-24D 782XBX2M4L-24A 782XBX2M4L-120A 782XBX2M4L-220/230A 782XBX2M4L-240A 782XBX2M4L-12D 782XBX2M4L-24D 782XBX2M4L-110D 12 VAC, 50/60 Hz 24 VAC, 50/60 Hz 110/120 VAC, 50/60 Hz 220/230 VAC, 50/60 Hz 240 VAC, 50/60 Hz 6 VDC 12 VDC 24 VDC 110/125 VDC 46 W 180 W 4,430 W 15,000 W 15,700 W 12 VAC, 50/60 Hz 24 VAC, 50/60 Hz 110/120 VAC, 50/60 Hz 220/230 VAC, 50/60 Hz 240 VAC, 50/60 Hz 6 VDC 12 VDC 24 VDC 110/125 VDC 46 W 180 W 4,430 W 15,000 W 15,700 W 24 VAC, 50/60 Hz 110/120 VAC, 50/60 Hz 220/230 VAC, 50/60 Hz 240 VAC, 50/60 Hz 12 VDC 24 VDC 110/125 VDC 180 W 4,430 W 15,000 W 15,700 W 160 W 650 W 11,000 W 24 VAC, 50/60 Hz 110/120 VAC, 50/60 Hz 12 VDC 24 VDC 110/125 VDC 180 W 4430 W 15700 W 160 W 11,000 W NOTE: CLASS 782C IS AN ENHANCED VERSION OF THE 78, IT HAS SUPERIOR RATINGS, A FLAG INDICATOR, & DISPLAYS BOTH PART NUMBERS. 160 W 650 W 11,000 W 160 W 650 W 11,000 W 9/04 1...23 750 OCTAL STYLE POWER RELAY C F E AT U R E S US UL Recognized File No. E43641 B E N E F I T S FLAG INDICATOR: SHOWS RELAY STATUS IN MANUAL OR POWERED CONDITION. BI - POLAR L.E.D. STATUS LAMP: ALLOWS FOR REVERSE POLARITY APPLICATIONS, SHOWS COIL "ON" OR "OFF" STATUS. IDEAL IN LOW LIGHT CONDITIONS. COLOR CODED PUSH BUTTON: IDENTIFIES AC COILS WITH RED OR DC COILS WITH BLUE PUSH BUTTONS. ALLOWS FOR MANUAL OPERATION OF RELAY WITHOUT THE NEED FOR COIL POWER. IDEAL FOR FIELD SERVICE PERSONNEL TO TEST CONTROL CIRCUITS. LOCK-DOWN DOOR: WHEN ACTIVATED, HOLDS PUSH BUTTON AND CONTACTS IN THE OPERATE POSITION. EXCELLENT FOR ANALYZING CIRCUIT PROBLEMS. 40787 COMPLIES WITH REQUIREMENTS OF * IEC STANDARDS 947-4-1 AND 947-5-1 LOW VOLTAGE DIRECTIVE = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LABORATORIES AS A THIRD PARTY PARTICIPANT C US LISTED 367G IND. CONT. EQ. WHEN USED WITH SOCKETS: 70-464-1, 70-465-1, 70-750D8-1 & 70-750D11-1 FINGER - GRIP COVER: ALLOWS OPERATOR TO REMOVE RELAYS FROM SOCKETS MORE EASILY THAN CONVENTIONAL RELAYS. WHITE PLASTIC I.D. TAG/WRITE LABEL: USED FOR IDENTIFICATION OF RELAYS IN MULTI-RELAY CIRCUITS. CURRENT LIMITED TO RATING OF RELAY OR SOCKET WHICHEVER IS LESS MANUFACTURED UNDER ISO 9002 & QS 9000 GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: Maximum Coil Dissipation, AC (60 Hz): Maximum Coil Dissipation, DC: Duty: UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % VA W VA W CONTA CONTACTS Contact Material: Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: General Purpose Rating (75%-80% pf): Horse Power (AC): Horse Power (AC): Pilot Duty (60 Hz): Utilization Category: VA Rating Make: VA Rating Break: Minimum Recommended Load: TIMING Operate Time: Release Time: A V A V A@V HP HP IEC VA VA ma ms ms 85 80 10 10 110 10 2.0 - 3.0 1.4 Class B (130 C) 3.5 3 Continuous Silver alloy, gold flashed 16 277 16 / 0.5 28 / 220 12 @ 120 / 240 1/3 @ 120 V 1/2 @ 240 V B300 AC15 3600 360 100 @ 5 VDC or 0.5 W 20 20 DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: V rms V rms V rms V rms megohms minimum @VDC 2500 1500 2500 2500 100 @ 500 gs SHOCK RESIS TANCE Functional: 10-55 Hz, 6 gs,1mm double amplitude gs 10 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -40 +50 -40 +65 -40 +105 operations operations 100,000 5,000,000 94V-0 94V-0 IP grams Any Molded plastic Polycarbonate 40 89 VIBR ATION RESIS TANCE Functional: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: 9/04 1...24 UNITS PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 750 OCTAL STYLE POWER RELAY DPDT & 3PDT 16 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 2.28 MAX. (57.9) Plain Cover With Flag & Optional Push Button WIRING DIAGRAM (VIEWED FROM PIN END) (12) (22) 5 4 NOTE: CLASS 750 IS AN ENHANCED VERSION OF THE A314, IT HAS SUPERIOR RATINGS, A FLAG INDICATOR, & DISPLAYS BOTH PART NUMBERS. 2.09 MAX. (50.3) (14) 3 (A1) 6 (24) 7 2 1 (11) 8 (21) (A2) Orange Flag 1.320 (33.528) Frosted Cover Push Button & Lock-Down Door Clear Window 1.37 (34.9) Orange Flag Indicator Plastic I.D. Tag / 1.35 (34.4) Write Label 1.39 (35.4) Green BI-Polar L. E. D. Status Lamp 7 8 4 3 (21) (24) 6 5 7 8 (32) (12) 4 9 (34) (14) 3 10 2 (A1) 1 11 (A2) (11) (31) (22) 9 2 1 11 10 8 PIN OCTAL BASE NOT SHOWN ORDERING CODE 750 6 5 8 PIN XBX M4L -120A CLASS: 11 PIN CONTACT CONFIGURATION: DPDT: XBX, 3PDT: XCX ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE OPTIONAL PLAIN COVER: CODE C OPTIONS: MAGNETIC BLOWOUT: CODE 69 FULL FEATURED VERSION: PUSH BUTTON & LOCK DOWN DOOR: CODE M4 BI - POLAR L.E.D. STATUS LAMP: CODE L OPTIONAL FULL FEATURED DELETION: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M. (CODES 69, L, OR M ALSO AVAILABLE ON CLEAR COVER VERSIONS) OPTIONAL PLAIN COVER FEATURES: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M POLARIZED L.E.D. STATUS LAMP: CODE L (OBSERVE POLARITY ) COIL VOLTAGE: 6, 12, 24, 120, 220 / 240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS STANDARD PART NUMBERS FULL PLAIN COVER FEATURED WITH FLAG AC OPERATED - 8 PIN OCTAL, 16 AMP Mating Sockets 70-750D8-1, 70-750D11-1, 70-464-1, 70-465-1, 70-750E8-1,70-750E11-1 70-750EL/SL8-1, 70-750EL/SL11-1: SCREW/DIN 70-169-1, 70-170-1: SCREW/PANEL See section 7 COIL MEASURED @ 25 C NOMINAL RESISTANCE(OHMS) CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE A314XBX48P-24A A314XBX48P-120A A314XBX48P-220/240A DPDT DPDT DPDT 24 VAC, 50/60Hz 110/120 VAC, 50/60Hz 220/240 VAC, 50/60Hz 72 W 1,700 W 7,200 W A314XBX48P-12D A314XBX48P-24D A314XBX48P-110D DPDT DPDT DPDT 12 VDC 24 VDC 110/125 VDC 120 W 470 W 10,000 W A314XCX48P-24A A314XCX48P-120A A314XCX48P-220/240A 3PDT 3PDT 3PDT 24 VAC, 50/60Hz 110/120 VAC, 50/60Hz 220/240 VAC, 50/60Hz 72 W 1,700 W 7,200 W A314XCX48P-12D A314XCX48P-24D A314XCX48P-110D 3PDT 3PDT 3PDT 12 VDC 24 VDC 110/125 VDC 120 W 470 W 10,000 W DUAL MARKED NEW PART NUMBER 750XBXM4L-24A 750XBXC-24A 750XBXM4L-120A 750XBXC-120A 750XBXM4L-220/240A 750XBXC-220/240A DC OPERATED - 8 PIN OCTAL, 16 AMP 750XBXM4L-12D 750XBXC-12D 750XBXM4L-24D 750XBXC-24D 750XBXM4L-110D 750XBXC-110D AC OPERATED - 11 PIN OCTAL, 16 AMP 750XCXM4L-24A 750XCXC-24A 750XCXM4L-120A 750XCXC-120A 750XCXM4L-220/240A 750XCXC-220/240A DC OPERATED - 11 PIN OCTAL, 16 AMP 750XCXM4L-12D 750XCXC-12D 750XCXM4L-24D 750XCXC-24D 750XCXM4L-110D 750XCXC-110D SUPERCEDES PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 9/04 1...25 788 PLUG-IN POWER RELAY C US F E AT U R E S B E N E F I T S FLAG INDICATOR: SHOWS RELAY STATUS IN MANUAL OR POWERED CONDITION. BI - POLAR L.E.D. STATUS LAMP: ALLOWS FOR REVERSE POLARITY APPLICATIONS, SHOWS COIL "ON" OR "OFF" STATUS. IDEAL IN LOW LIGHT CONDITIONS. COLOR CODED PUSH BUTTON: IDENTIFIES AC COILS WITH RED OR DC COILS WITH BLUE PUSH BUTTONS. ALLOWS FOR MANUAL OPERATION OF RELAY WITHOUT THE NEED FOR COIL POWER. IDEAL FOR FIELD SERVICE PERSONNEL TO TEST CONTROL CIRCUITS. UL Recognized File No. E43641 40787 COMPLIES WITH REQUIREMENTS OF * IEC STANDARDS 947-4-1 AND 947-5-1 LOW VOLTAGE DIRECTIVE = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LOCK-DOWN DOOR: WHEN ACTIVATED, HOLDS PUSH BUTTON AND CONTACTS IN THE OPERATE POSITION. EXCELLENT FOR ANALYZING CIRCUIT PROBLEMS. FINGER - GRIP COVER: ALLOWS OPERATOR TO REMOVE RELAYS FROM SOCKETS MORE EASILY THAN CONVENTIONAL RELAYS. WHITE PLASTIC I.D. TAG/WRITE LABEL: USED FOR IDENTIFICATION OF RELAYS IN MULTI-RELAY CIRCUITS. LABORATORIES AS A THIRD PARTY PARTICIPANT C US LISTED 367G IND. CONT. EQ. WHEN USED WITH SOCKET 70-463-1 CURRENT LIMITED TO RATING OF RELAY OR SOCKET WHICHEVER IS LESS MANUFACTURED UNDER ISO 9002 & QS 9000 GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: Maximum Coil Dissipation, AC (60 Hz): Maximum Coil Dissipation, DC: Duty: UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % VA W VA W CONTA CONTACTS Contact Material: A V A V HP HP Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): Pilot Duty (60 Hz): Utilization Category: VA Rating Make: VA Rating Break: Minimum Recommended Load: IEC VA VA ma TIMING Operate Time: Release Time: ms ms 85 80 10 10 110 10 2.0 - 3.0 1.4 Class B (130 C) 3.5 3 Continuous Silver alloy, gold flashed 16 277 16 / 0.5 28 / 220 1/3 @ 120 V 1/2 @ 240 V B300 AC15 3600 360 100 @ 5 VDC or 0.5 W 20 20 DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: V rms V rms V rms V rms megohms minimum @VDC 2500 1500 2500 1000 @ 500 VIBR ATION RESIS TANCE Functional: gs SHOCK RESIS TANCE Functional: 10-55 Hz, 6 gs,1mm double amplitude gs 10 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -40 +50 -40 +65 -40 +105 LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : operations operations 100,000 5,000,000 MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: 94V-0 94V-0 IP Inch (mm) Weight: 9/04 1...26 UNITS PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com grams Any Molded plastic Polycarbonate 40 0.187, 0.062 x 0.020 (4.74, 1.57 x 0.508) 88 788 PLUG-IN POWER RELAY DPDT & 3PDT, 16 AMPS WIRING DIAGRAM (VIEWED FROM PIN END) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). Plain Cover With Flag & Optional Push Button QUICK CONNECT SOLDER / PLUG-IN TERMINALS 2.15 MAX (54.6) PRINTED CIRCUIT TERMINALS (12) 1 (22) 3 (14) 4 (24) 6 (11) 7 (21) 9 (A1)A (A2) B DPDT 1.97 (50) Orange Flag Push Button & Lock-Down Door 1.32 (33.5) Orange Flag Indicator Frosted Cover Clear Window 1.35 (34.4) 1.37 (34.9) 1.39 (35.4) 1 2 3 4 5 6 7 8 9 (32) 2 (22) 3 (14)4 (34)5 (24) 6 (11) 7 (31)8 (21)9 (A1)A ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE PRINTED CIRCUIT MOUNTING HOLE LAYOUT Plastic I.D. Tag / Write Label (A2) B 3PDT B A Green BI-Polar L. E. D. Status Lamp 12) 1 ( TOP VIEW ) 0.875 (22.2) 0.829 (21.0) 0.611 (15.5) ORDERING CODE 788 XBX M4L -120A 0 .078 (1.98)Dia. Holes for printed circuit terminals. CLASS: CONTACT CONFIGURATION: DPDT: XBX, 3PDT: XCX OPTIONAL PLAIN COVER: CODE C TERMINAL STYLE: SOLDER PLUG-IN TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T FULL FEATURED VERSION: PUSH BUTTON & LOCK DOWN DOOR: CODE M4 BI - POLAR L.E.D. STATUS LAMP: CODE L OPTIONAL FULL FEATURED DELETION: PUSH BUTTON WITHOUT LOCK DOWN DOOR: CODE M OPTIONAL PLAIN COVER FEATURES: PUSH BUTTON WITHOUT LOCK-DOWN DOOR: CODE M POLARIZED L.E.D. STATUS LAMP: CODE L (OBSERVE POLARITY ) COIL VOLTAGE: 6, 12, 24,120, 220 / 240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 0.437 (11.1) 0.287 (7.28) Mating Sockets 70-463-1: SCREW/DIN 70-124-1: SOLDER 70-178-1, 70-178-2: PRINTED CIRCUIT 70-788EL/SL11-1, 70-124-2: QUICK CONNECT See section 7 COIL MEASURED @ 25 C FULL FEATURED CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE AC OPERATED - SOLDER/PLUG-IN, 16 AMP 788XBXM4L-24A 24 VAC, 50/60Hz DPDT 788XBXM4L-120A 110/120 VAC, 50/60Hz DPDT 788XBXM4L-220/240A 220/240 VAC, 50/60Hz DPDT DC OPERATED - SOLDER/PLUG-IN, 16 AMP 788XBXM4L-12D 788XBXM4L-24D 788XBXM4L-110D 12 VDC DPDT 24 VDC DPDT 110/125 VDC DPDT AC OPERATED - SOLDER/PLUG-IN, 16 AMP 788XCXM4L-24A 24 VAC, 50/60Hz 3PDT 788XCXM4L-120A 110/120 VAC, 50/60Hz 3PDT 788XCXM4L-220/240A 220/240 VAC, 50/60Hz 3PDT DC OPERATED - SOLDER/PLUG-IN, 16 AMP 788XCXM4L-12D 12 VDC 3PDT 788XCXM4L-24D 24 VDC 3PDT 788XCXM4L-110D 110/125 VDC 3PDT CADMIUM-FREE CONTACTS AVAILABLE, CONTACT FACTORY FOR DETAILS NOMINAL RESISTANCE (OHMS) 72 W 1,700 W 7,200 W 120W 470 W 10,000 W 72 W 1,700 W 7,200 W 120 W 470 W 10,000 W 9/04 1...27 A283 PLUG-IN & FLANGE MOUNT RELAYS UL CONTACT LOAD RATINGS TABLE CONTACT CONFIGURATION C US UL Recognized File No. E13224 1 POLE THRU 3 POLES 168986 COMPLIES WITH REQUIREMENTS OF * CURRENT OR HORSE POWER LOAD VOLTAGE LOAD VOLTAGE FREQUENCY TYPE OF LOAD 15 AMP 240 VAC 50/60 Hz RESISTIVE 10 AMP 28 VDC DC RESISTIVE 1/3 HP 120 VAC 50/60 Hz MOTOR 1/2 HP 240 VAC 50/60 Hz MOTOR 3 AMP 600 VAC 50/60 Hz RESISTIVE IEC STANDARDS 947-4-1 AND 947-5-1 LOW VOLTAGE DIRECTIVE = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LABORATORIES AS A THIRD PARTY PARTICIPANT C US MANUFACTURED UNDER ISO 9002 & QS 9000 UL CONTACT LOAD RATINGS TABLE FOR DC SWITCHING ( WITH OPTIONAL MAGNETIC BLOWOUT: CODE 69 ) CONTACT CONFIGURATION CURRENT OR HORSE POWER LOAD VOLTAGE TYPE OF LOAD DPDT 3 AMP 150 VDC RESISTIVE DPST - NO 5 AMP 150 VDC RESISTIVE SPST - NO (DM ) 10 AMP 150 VDC RESISTIVE SPDT (DB and DM) 10 AMP 150 VDC RESISTIVE LISTED 367G IND. CONT. EQ. WHEN USED WITH SOCKETS 70-463-1 CURRENT LIMITED TO RATING OF RELAY OR SOCKET WHICHEVER IS LESS GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: Duty: UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % VA W CONTA CONTACTS Contact Material: Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): Minimum Recommended Load: DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: A V A V HP V ma V rms V rms V rms V rms megohms minimum @VDC 85 80 10 10 110 10 2.75 2 Class B (130 C) Continuous Silver alloy gold flashed 15 240 10 28 1/3 @ 120 V 1/2 @ 240 V 100 @ 5 VDC or 0.5 W 2000 500 2000 Not applicable 1000 @ 500 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -30 +60 -30 +50 -30 +100 LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : operations operations 100,000 10,000,000 MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: 94V-0 94V-0 IP Inch (mm) Weight: 9/04 1...28 UNITS PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com grams Any Molded plastic Polycarbonate 40 0.187, 0.062 x 0.020 (4.74, 1.57 x 0.508 ) 88 A283 PLUG-IN & FLANGE MOUNT RELAYS FLANGE MOUNT PLUG-IN RECOMMENDED PRINTED CIRCUIT LAYOUT (TOP VIEW) 0.875 (22.2) 0.611 (15.5) 0 .078 (1.98) dia. holes for printed circuit terminals. ORDERING CODE A283 XCX C1 M- CLASS: CONTACT CONFIGURATION: SPDT: XAX DPDT: XBX DPST-NO: BXX 3PDT: XCX SPST -NO-DM: HXX SPDT -DB and DM: XHX OPTIONAL: MAGNETIC BLOWOUT: CODE 69 240A 0.437 (11.1) 0.829 (21.0) 0.287 (7.28) OPTIONAL PRINTED CIRCUIT TERMINAL OPTIONAL TOP FLANGE COVER CONSTRUCTION STYLE: * ENCLOSED, PLAIN COVER: CODE C ENCLOSED, FLANGE COVER: CODE C1 ENCLOSED TOP FLANGE MOUNT: CODE C3 ENCLOSED DIN MOUNT: CODE C4 TERMINAL STYLE: QUICK CONNECT SOLDER TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T OPTIONAL DIN COVER OPTIONS: BI - POLAR L.E.D. STATUS LAMP: CODE L PUSH BUTTON: CODE M COIL VOLTAGE: 6, 12, 24, 120, 240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS * Note: Code C recommended to be used with printed circuit. terminals or Plug-in applications only. 9/04 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 1...29 A283 PLUG-IN & FLANGE MOUNT RELAYS SPDT, DPDT & 3PDT, 15 AMPS OUTLINE DIMENSIONS QUICK CONNECT SOLDER / PLUG-IN TERMINALS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). PRINTED CIRCUIT TERMINALS WIRING DIAGRAM (VIEWED FROM PIN END) (12) 1 (32) 2 3 (22) (14) 4 (34) 5 6 (24) (11) 7 (31) 8 9 (21) (A1)A B(A2) SPDT 2.50 MAX. (63.5) 1.90 MAX. (48.4) 1.53 MAX. (38.8) 2.90 MAX. (73.8) 1.40 (35.5) 1 2 3 4 5 6 7 8 9 A B (12) 1 3 (22) (14) 4 6 (24) (11) 7 9 (21) (A1)A B(A2) DPDT 12) 1 (32) 2 3(22) (14) 4 (34)5 6(24) (11) 7 (31) 8 9 (21) (A1)A B (A2) 3PDT ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE SEE CLASS 788 FOR PART NUMBERS WITH L.E.D. STATUS LAMP AND PUSH BUTTON F LANGE MOUNT COIL MEASURED @ 25 C STANDARD PART NUMBERS CONTACT CONFIGURATION AC OPERATED, 15 AMP SPDT A283XAXC1-120A SPDT A283XAXC1-240A DPDT A283XBXC1-120A DPDT A283XBXC1-240A 3PDT A283XCXC1-120A 3PDT A283XCXC1-240A DC OPERATED, 15 AMP SPDT A283XAXC1-12D SPDT A283XAXC1-24D DPDT A283XBXC1-12D DPDT A283XBXC1-24D 3PDT A283XCXC1-24D 9/04 1...30 NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) 110/120 VAC, 50/60Hz 220/240 VAC, 50/60Hz 110/120 VAC, 50/60Hz 220/240 VAC, 50/60Hz 110/120 VAC, 50/60Hz 220/240 VAC, 50/60Hz 2250 9100 2250 9100 1700 7200 W 12 VDC 24 VDC 12 VDC 24 VDC 24 VDC 120 472 120 472 472 W RETROFITS POTTER & BRUMFIELD KUP. SEE END OF SECTION 1 FOR CROSS REFERENCE W W W W W W W W W PLUG-IN Mating Sockets 70-463-1: SCREW/DIN 70-124-1: SOLDER 70-178-1, 70-178-2: PRINTED CIRCUIT 70-788EL/SL-1, 170-124-2: QUICK CONNECT See section 7 COIL MEASURED @ 25 C STANDARD PART NUMBERS CONTACT NOMINAL CONFIGUINPUT RATION VOLTAGE AC OPERATED SOLDER/PLUG-IN, 15 AMP A283XAXC-120A A283XAXC-240A A283XBXC-24A A283XBXC-120A A283XBXC-240A A283XCXC-24A A283XCXC-120A A283XCXC-240A NOMINAL RESISTANCE (OHMS) 110/120 VAC, 50/60Hz 220/240 VAC, 50/60Hz 24 VAC, 50/60Hz 110/120 VAC, 50/60Hz 220/240 VAC, 50/60Hz 24 VAC, 50/60Hz 110/120 VAC, 50/60Hz 220/240 VAC, 50/60Hz 2250 W 9100 W 75 W 2250 W 9100 W 72 W 1700 W 7200 W DC OPERATED SOLDER/PLUG-IN, 15 AMP A283XAXC-12D SPDT 12 VDC A283XAXC-24D SPDT 24 VDC A283XBXC-12D DPDT 12 VDC A283XBXC-24D DPDT 24 VDC A283XBXC-110D DPDT 110/125 VDC A283XCXC-12D 3PDT 12 VDC A283XCXC-24D 3PDT 24 VDC 120 W 472 W 120 W 472 W 10,000 W 120 W 472 W SPDT SPDT DPDT DPDT DPDT 3PDT 3PDT 3PDT PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com A283 PLUG-IN RELAY FOR DC SWITCHING DPDT, SPST-NO-DM 3, 5 & 10 AMPS 150 VDC SWITCHING WIRING DIAGRAM (VIEWED FROM PIN END) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). QUICK CONNECT SOLDER / PLUG-IN TERMINALS (12) 1 3 (22) (14) 4 6 (24) (11) 7 9 (21) (A1)A B(A2) DPDT PRINTED CIRCUIT TERMINALS 1.53 MAX. (38.8) (14)4 6 (24) (A1)A B (A2) SPST-NO-DM 1.90 MAX. (48.4) 1.53 MAX. (38.8) 1.40 (35.5) 1 3 4 6 7 9 A B ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE BLOWOUT MAGNET STANDARD FEATURE THE BLOWOUT MAGNET STYLES HAVE THE SAME LOAD SPECIFICATIONS AS THE A283 ENCLOSED PLUG-IN RELAYS, PLUS THE ADDITIONAL DC LOAD RATINGS. SEE A283 GENERAL SPECIFICATIONS. SEE CLASS 788 FOR PART NUMBERS WITH L.E.D. STATUS LAMP AND PUSH BUTTON PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com Mating Sockets 70-463-1: SCREW/DIN 70-124-1: SOLDER 70-178-1, 70-178-2: PRINTED CIRCUIT 70-788EL/SL-1, 70-124-2: QUICK CONNECT See section 7 COIL MEASURED @ 25 C STANDARD PART NUMBERS CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) AC OPERATED WITH BLOWOUT MAGNET, 3 AMP 110/120 VAC, 50/60Hz A283XBX69C-120A DPDT DC OPERATED WITH BLOWOUT MAGNET, 3 AMP 12 VDC A283XBX69C-12D DPDT 24 VDC A283XBX69C-24D DPDT 110/125 VDC A283XBX69C-110D DPDT AC OPERATED WITH BLOWOUT MAGNET, 10 AMP 110/120 VAC, 50/60Hz A283HXX69C-120A SPST-NO (DM) DC OPERATED WITH BLOWOUT MAGNET, 10 AMP 48 VDC A283XHX69C-48D SPDT-NO (DB-DM) DC OPERATED WITH BLOWOUT MAGNET, 5 AMP 24 VDC A283BXX69C-24D DPST-NO 48 VDC A283BXX69C-48D DPST-NO DC OPERATED WITH BLOWOUT MAGNET, 10 AMP 12 VDC A283HXX69C-12D SPST-NO (DM) 24 VDC A283HXX69C-24D SPST-NO (DM) 48 VDC A283HXX69C-48D SPST-NO (DM) 110/125 VDC A283HXX69C-110D SPST-NO (DM) RETROFITS POTTER & BRUMFIELD KUP. SEE END OF SECTION 1 FOR CROSS REFERENCE 2250 W 120 W 472 W 10,000 W 2250 W 1800 W 472 W 1800 W 120 W 472 W 1800 W 10,000 W 9/04 1...31 388J & 388V PLUG-IN & FLANGE MOUNT RELAYS UL CONTACT LOAD RATINGS TABLE FOR 388J C CONTACT CONFIGURATION US UL Recognized File No. E43641 DPDT 168986 for 388J 41729 for 388V 3PDT 2 & 3 POLES COMPLIES WITH REQUIREMENTS OF * CURRENT OR HORSE POWER LOAD VOLTAGE LOAD VOLTAGE FREQUENCY TYPE OF LOAD 20 AMP 300 VAC 50/60 Hz RESISTIVE 20 AMP 28 VDC DC RESISTIVE 16 AMP 277 VAC 50/60 Hz RESISTIVE 16 AMP 28 VDC DC RESISTIVE 3/4 HP 120 VAC 50/60 Hz MOTOR 1 HP 208 - 600 VAC 50/60 Hz MOTOR IEC STANDARDS 947-4-1 AND 947-5-1 LOW VOLTAGE DIRECTIVE = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION UL CONTACT LOAD RATINGS TABLE FOR 388V TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LABORATORIES AS A THIRD PARTY PARTICIPANT C CONTACT CONFIGURATION US LISTED 367G IND. CONT. EQ. 1 POLE THRU 3 POLES WHEN USED WITH SOCKETS 70-463-1 CURRENT LIMITED TO RATING OF RELAY OR SOCKET WHICHEVER IS LESS PLUG-IN MANUFACTURED UNDER ISO 9002 & QS 9000 FLANGE MOUNT CURRENT OR HORSE POWER LOAD VOLTAGE LOAD VOLTAGE FREQUENCY TYPE OF LOAD 15 AMP 240 VAC 50/60 Hz RESISTIVE 15 AMP 28 VDC DC RESISTIVE 1/3 HP 120 VAC 50/60 Hz MOTOR 1/2 HP 240 VAC 50/60 Hz MOTOR OPTIONAL DIN MOUNT COVER BENEFITS OF 3mm CONTACT GAP DESIGN: 1. HIGH DIELECTRIC STRENGTH ACROSS CONTACTS. 2. IMPROVED ARC QUENCHING WHEN BREAKING HIGH CURRENT LOADS. 3. MEETS EUROPEAN SPACING REQUIREMENTS OF 8mm ACROSS SURFACES GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: Duty: UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % VA W CONTA CONTACTS Contact Material: Contact Rating AC Amperes (AC1): A Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): V A V HP Horse Power (AC): HP Minimum Recommended Load: ma 85 80 10 10 110 10 J: 2.75, V: 4 2 Class B (130C) Continuous Silver alloy gold flashed J: 2 Pole-20, 3 Pole-16 V: 15 240 J: 20, V: 15 28 J: 3/4 @ 120 V V: 1/3 @ 120 V J: 1 @ 240 V V: 1/2 @ 240 V 100 @ 5 VDC or 0.5 W DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: V rms V rms V rms V rms megohms minimum @ VDC J: 2000, V: 4000 J: 500, V: 1000 2000 Not applicable 1000 @ 500 C C C C C C -30 +65 -30 +50 -30 +100 LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : operations operations 100,000 5,000,000 MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: 94V-0 94V-0 IP Inch (mm) TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: Weight: 9/04 1...32 UNITS PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com grams Any Molded plastic Polycarbonate 40 0.187x 0.020 (4.74 x 0.508 ) 88 388J HIGH CURRENT PLUG-IN & FLANGE MOUNT RELAYS DPDT 20 AMPS & 3PDT 16 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). WIRING DIAGRAM (VIEWED FROM PIN END) 1 3 (22) (14) (14) 4 6 (24) (12) QUICK CONNECT SOLDER / PLUG-IN TERMINALS PLUG-IN (11) 1.53 MAX. (38.8) FLAG INDICATOR & PUSH BUTTON STANDARD. 9 (21) B (A2) (A1)A DPDT 1.90 MAX. (48.4) Push Button Orange Flag Indicator 1.53 MAX. (38.8) 1.40 (35.5) 1 2 3 4 5 6 7 8 9 A Optional Green BI-Polar L. E. D. Status Lamp 7 1 2 (32) 3 (22) (14) 4 5 (34) 6 (11) 7 (31) 8 (21) 24) 9 (A1)A 1.40 (35.5) B (A2) 3PDT B 2.90 MAX. (73.8) 2.50 MAX. (63.5) FLANGE COVER COVER (12) ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE Mating Sockets 70-463-1: SCREW/DIN 70-124-1: SOLDER 70-178-1, 70-178-2: PRINTED CIRCUIT 70-788EL/SL-1, 70-124-2: QUICK CONNECT See section 7 COIL MEASURED @ 25 C ORDERING CODE 388J XCX C1 M- 240A CLASS: FLAG INDICATOR STANDARD FEATURE CONTACT CONFIGURATION: DPDT: XBX, 3PDT: XCX OPTIONAL: MAGNETIC BLOWOUT: CODE 69 (XBX ONLY) CONSTRUCTION STYLE: * ENCLOSED, PLAIN COVER: CODE C ENCLOSED, FLANGE COVER: CODE C1 ENCLOSED TOP FLANGE MOUNT: CODE C3 ENCLOSED DIN MOUNT: CODE C4 TERMINAL STYLE: QUICK CONNECT SOLDER TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T OPTIONS: BI - POLAR L.E.D. STATUS LAMP: CODE L PUSH BUTTON: CODE M COIL VOLTAGE: 6, 12, 24, 120, 240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS * Note: Code C recommended to be used with printed circuit. terminals or Plug-in applications only. PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com STANDARD PART NUMBERS CONTACT CONFIGURATION NOMINAL NOMINAL RESISTANCE INPUT (OHMS) VOLTAGE AC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 20 AMP 388JXBXC1M-240A DPDT 9100 W 220/240 VAC,50/60Hz 388JXBXC1M-120A DPDT 2250 W 110/120 VAC,50/60Hz DC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 20 AMP 388JXBXC1M-12D DPDT 120 W 12 VDC 388JXBXC1M-24D DPDT 470 W 24 VDC AC OPERATED PLUG-IN WITH PUSH BUTTON, 20 AMP 388JXBXCM-240A DPDT 9100 W 220/240 VAC,50/60Hz 388JXBXCM-120A DPDT 2250 W 110/120 VAC,50/60Hz DC OPERATED PLUG-IN WITH PUSH BUTTON, 20 AMP 388JXBXCM-12D DPDT 120 W 12 VDC 388JXBXCM-24D DPDT 470 W 24 VDC AC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 16 AMP 388JXCXC1M-240A 3PDT 7200 W 220/240 VAC,50/60Hz 388JXCXC1M-120A 3PDT 1700 W 110/120 VAC,50/60Hz DC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 16 AMP 388JXCXC1M-12D 3PDT 120 W 12 VDC 388JXCXC1M-24D 3PDT 470 W 24 VDC AC OPERATED PLUG-IN WITH PUSH BUTTON, 16 AMP 388JXCXCM-240A 3PDT 7200 W 220/240 VAC,50/60Hz 388JXCXCM-120A 3PDT 1700 W 110/120 VAC,50/60Hz DC OPERATED PLUG-IN WITH PUSH BUTTON, 16 AMP 388JXCXCM-12D 3PDT 120 W 12 VDC 388JXCXCM-24D 3PDT 470 W 24 VDC RETROFITS SCHRACK RM. SEE END OF SECTION 1 FOR CROSS REFERENCE CADMIUM-FREE CONTACTS AVAILABLE, CONTACT FACTORY FOR DETAILS 9/04 1...33 388V HIGH VOLTAGE PLUG-IN & FLANGE MOUNT RELAYS DPST-NO & 3PST-NO 15 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). QUICK CONNECT SOLDER / PLUG-IN TERMINALS PLUG-IN 1.90 MAX. (48.4) Push Button (14) 4 6 (24) (11) 7 9 (21) 5 6 7 8 9 1.40 (35.5) B (14) 4 (11) 7 (A1) 2.90 MAX. (73.8) 2.50 MAX. (63.5) 1.40 (35.5) B (A2) DPST-NO 4 A (VIEWED FROM PIN END) (A1) A 1.53 MAX. (38.8) 1.53 MAX. (38.8) WIRING DIAGRAM (34)5 8(31) (24) 6 (21) 9 A B (A2) 3PST-NO ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE 3 MILLIMETER CONTACT GAP. PUSH BUTTON STANDARD. OPTIONAL FLANGE COVER COVER ORDERING CODE 388V CXX C1 M- 240A CLASS: CONTACT CONFIGURATION: DPST-NO: BXX 3PST-NO: CXX Mating Sockets 70-463-1: SCREW/DIN 70-124-1: SOLDER 70-178-1, 70-178-2: PRINTED CIRCUIT 70-788EL/SL-1, 70-124-2: QUICK CONNECT See section 7 OPTIONAL: MAGNETIC BLOWOUT: CODE 69 (BXX ONLY) CONSTRUCTION STYLE: * ENCLOSED, PLAIN COVER: CODE C ENCLOSED, FLANGE COVER: CODE C1 ENCLOSED TOP FLANGE MOUNT: CODE C3 ENCLOSED DIN MOUNT: CODE C4 TERMINAL STYLE: QUICK CONNECT SOLDER/PLUG-IN TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T OPTIONS: BI - POLAR L.E.D. STATUS LAMP: CODE L PUSH BUTTON: CODE M COIL VOLTAGE: 6, 12, 24, 120, 220/240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS * Note: Code C recommended to be used with printed circuit. terminals or 9/04 1...34 Plug-in applications only. PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com COIL MEASURED @ 25 C STANDARD PART NUMBERS CONTACT CONFIGURATION 388VCXXCM-24D 388VCXXCM-12D 388VBXXCM-24D 388VBXXCM-12D 3PST-NO 3PST-NO DPST-NO DPST-NO NOMINAL NOMINAL RESISTANCE INPUT (OHMS) VOLTAGE AC OPERATED PLUG-IN WITH PUSH BUTTON 3mm GAP, 15 AMP 9100 W 388VCXXCM-220/240A 3PST-NO 220/240 VAC,50/60Hz 1100 W 3PST-NO 110/120 VAC,50/60Hz 388VCXXCM-120A 75 W 3PST-NO 388VCXXCM-24A 24 VAC,50/60Hz 9100 W 388VBXXCM-220/240A DPST-NO 220/240 VAC,50/60Hz 1100 W DPST-NO 110/120 VAC,50/60Hz 388VBXXCM-120A 75 W DPST-NO 388VBXXCM-24A 24 VAC,50/60 Hz DC OPERATED PLUG-IN WITH PUSH BUTTON 3mm GAP, 15 AMP 24 VDC 12 VDC 24 VDC 12 VDC RETROFITS POTTER & BRUMFIELD KUGP. SEE END OF SECTION 1 FOR CROSS REFERENCE 240 W 120 W 240 W 120 W 389 & 389F FLANGE MOUNT POWER RELAYS B E N E F I T S F E AT U R E S C OVERSIZE CURRENT CARRYING PARTS RUNS COOLER & LONGER 600 VOLT SPACING HANDLES MOST LOAD VOLTAGES FULL RANGE OF CONTACT RATINGS ELIMINATES GUESS WORK BROAD SELECTION OF MOUNTING STYLES & OPTIONS CAN BE CUSTOMIZED FOR UNIQUE SITUATIONS US UL Recognized File No. E43641 168986 DIELECTRIC STRENGTH CHART (V rms) COMPLIES WITH REQUIREMENTS OF * IEC STANDARDS 947-4-1 AND 947-5-1 LOW VOLTAGE DIRECTIVE = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LABORATORIES AS A THIRD PARTY PARTICIPANT STANDARD SIDE FLANGE COVER CONTACT CONFIGURATION ACROSS OPEN CONTACTS COIL TO CONTACTS POLE TO POLE SPST 1000 2200 - DPDT 1000 2200 2200 3PDT 1000 1600 1600 SPDT (DB and DM) 1500 2200 - 389F WITH PUSH BUTTON AND FLAG OPTIONAL TOP FLANGE COVER MANUFACTURED UNDER ISO 9002 & QS 9000 OPTIONAL DIN COVER GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: Duty: CONTA CONTACTS Contact Material: Contact Rating AC Amperes (AC1): Pilot Duty: VA Rating Make: VA Rating Break: Minimum Recommended Load: DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % VA W A VA VA ma V rms V rms V rms V rms megohms minimum @VDC 85 80 10 10 110 10 3.5 1.44 Class B (130 C) Continuous Silver alloy gold flashed 20, 25, 30 see load tables A600, B600 600 60 100 @ 5 VDC or 0.5 W 1600 1000 1600 Not applicable 1000 @ 500 UNITS TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -30 +65 -30 +50 -30 +100 LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : operations operations 100,000 5,000,000 MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: 94V-0 94V-0 IP Inch (mm) Weight: PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com grams Any Molded plastic Polycarbonate 40 0.250, 0.09 x 0.032 (6.35, 2.29 x 0.81 ) 88 9/04 1...35 389 & 389F FLANGE MOUNT POWER RELAYS 20, 25 & 30 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). QUICK CONNECT SOLDER / PLUG-IN TERMINALS 2.50 MAX. (63.5) 2.90 MAX. (73.8) PRINTED CIRCUIT MOUNTING HOLE LAYOUT ( TOP VIEW ) 1.90 MAX. (48.4) Push Button Orange Flag Indicator 0.875 (22.2) 0.437 (11.1) 1.53 MAX. (38.8) 1.40 (35.5) Optional Green BI-Polar L. E. D. Status Lamp 1 2 3 4 5 6 7 8 9 A 3.14 (7.98) 0.224 (5.69) 0.611 (15.52) B 0 .100 (2.54) Dia. Typ. CLASS 389 LOAD RATINGS CONTACT CONFIGURATION SPDT CURRENT ORHORSE POWER LOAD VOLTAGE LOAD VOLTAGE FREQUENCY 13A 28 DC RESISTIVE 20A 15 DC RESISTIVE 25A 300 50/60 Hz RESISTIVE 5A 600 50/60 Hz RESISTIVE 20A 277 50/60 Hz BALLAST 1HP 120 50/60 Hz MOTOR 1-1/2HP 208/240 50/60 Hz MOTOR 1HP 480/600 50/60 Hz MOTOR 660VA 120 50/60 Hz PILOT DUTY 960VA 240 50/60 Hz PILOT DUTY 50/60Hz PILOT DUTY B600 DPDT 13A 28 DC RESISTIVE 20A 15 DC RESISTIVE 25A 300 50/60 Hz RESISTIVE 5A 600 50/60 Hz RESISTIVE 20A 277 50/60 Hz BALLAST 1HP 120 50/60 Hz MOTOR 1-1/2HP 208/240 50/60 Hz MOTOR 1HP 480/600 50/60 Hz MOTOR 660VA 120 50/60 Hz PILOT DUTY 960VA 240 50/60Hz PILOT DUTY 50/60Hz PILOT DUTY B600 3PDT TYPE OF LOAD 13A 28 DC RESISTIVE 15A 28 DC (NO) RESISTIVE 20A 15 DC RESISTIVE 20A 150 50/60 Hz RESISTIVE 15A 250 50/60 Hz RESISTIVE 10A 300 50/60 Hz RESISTIVE 20A 150 50/60 Hz BALLAST 6-2/3A 277 50/60 Hz BALLAST 1/2HP 120 50/60Hz MOTOR 1/2HP 208/240 50/60 Hz MOTOR 1HP 240 50/60 Hz MOTOR 3/4HP 120 50/60Hz MOTOR 470VA 120/240 50/60Hz PILOT DUTY 50/60Hz PILOT DUTY B300 Note: Code C to be used with mating socket. 25/30 amps socket now available, see section 7-27 CLASS 389D LOAD RATINGS CONTACT CONFIGURATION SPST (NO-DM) CURRENT OR HORSE POWER LOAD VOLTAGE LOAD VOLTAGE FREQUENCY TYPE OF LOAD 30A 28 DC RESISTIVE 30A 300 50/60 Hz RESISTIVE 10A 600 50/60 Hz RESISTIVE 1HP 120 50/60 Hz MOTOR 1-1/2HP 200 thru 600 50/60 Hz MOTOR 765VA 120 50/60 Hz PILOT DUTY 960VA 240,480,600 50/60 Hz PILOT DUTY 50/60 Hz PILOT DUTY 50/60 Hz BALLAST A600 SPDT (DB and DM) 25 A 277 UL APPLIANCE RATED. ALL OTHER RATINGS NOT SO MARKED ARE INDUSTRIAL RATED CSA RATING ONLY, NOT UL 9/04 1...36 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 389 & 389F FLANGE MOUNT POWER RELAYS 20, 25 & 30 AMPS WIRING DIAGRAM WIRING DIAGRAM (VIEWED ROM FROMPIN PINEND) END) (VIEWED (12) 1 3 (22) (12) 1 (32) 2 3 (22) (14) 4 6 (24) (14) 4 (34)5 6 (24) (11) 7 9 (21) (11) 7 (31) 8 9 (21) CLASS: FLAG INDICATOR STANDARD FEATURE (A1)A B(A2) (A1)A CONTACT CONFIGURATION: DPDT: XBX, 3PDT: XCX (12) 1 DPDT (32)2 3 (22) (14) 4 (34) 5 6 (24) (11) 7 (31) 8 9 (21) ORDERING CODE 389F XCX C1 M -120A OPTIONAL: MAGNETIC BLOWOUT: CODE 69 (XBX ONLY) (A1)A CONSTRUCTION STYLE: * ENCLOSED, PLAIN COVER: CODE C ENCLOSED, FLANGE COVER: CODE C1 ENCLOSED TOP FLANGE MOUNT: CODE C3 ENCLOSED DIN MOUNT: CODE C4 389 OPTIONS: BI - POLAR L.E.D. STATUS LAMP: CODE L PUSH BUTTON: CODE M STANDARD PART NUMBERS COIL VOLTAGE: 6, 12, 24, 120, 240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS see section 7-27 25/30 amps socket now available, COIL MEASURED @ 25 C CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE 6(24) (A1)A B(A2) SPST-NO-DM (12)1 3(22) (14)4 6(24) (A1)A B(A2) CONTACT CONFIGURATION SPDT-NC-NO-DB-DM COIL MEASURED @ 25 C NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) AC OPERATED FLANGE MOUNT, 30 AMP 389F STANDARD PART NUMBERS (14)4 3PDT TERMINAL STYLE: 0.250 QUICK CONNECT SOLDER TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T * Note: Code C to be used with mating socket. SPDT B(A2) ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE B (A2) NOMINAL RESISTANCE (OHMS) AC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 25 AMP DPDT 7200 W 389FXBXC1M-240A 220/240 VAC, 50/60Hz DPDT 1700 W 389FXBXC1M-120A 110/120 VAC,50/60Hz AC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 20 AMP 3PDT 4600 W 389FXCXC1M-240A 220/240 VAC, 50/60Hz 3PDT 1200 W 389FXCXC1M-120A 110/120 VAC, 50/60Hz DC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 25 AMP DPDT 100 W 389FXBXC1M-12D 12 VDC DPDT 400 W 389FXBXC1M-24D 24 VDC DC OPERATED FLANGE MOUNT WITH PUSH BUTTON, 20 AMP 3PDT 100 W 389FXCXC1M-12D 12 VDC 3PDT 400 W 389FXCXC1M-24D 24 VDC RETROFITS SCHRACK RM. SEE END OF SECTION 1 FOR CROSS REFERENCE PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com SPST-NO (DM) 110/120 VAC,50/60Hz SPST-NO (DM) 220/240 VAC,50/60Hz SPDT-NO-NC 24 VAC,50/60Hz (DB-DM) W389ADZCX-4 SPDT-NO-NC 110/120 VAC,50/60Hz (DB-DM) DC OPERATED FLANGE MOUNT, 30 AMP SPST-NO (DM) 12 VDC W389DCX-2 SPST-NO (DM) 24 VDC W389DCX-3 SPST-NO-NC 12 VDC W389DZCX-2 (DB-DM) SPST-NO-NC 24VDC W389DZCX-3 (DB-DM) AC OPERATED FLANGE MOUNT, 25 AMP SPDT 110/120 VAC,50/60Hz W389ACX-4 DPDT 24 VAC,50/60Hz W389ACX-8 DPDT 110/120 VAC,50/60Hz W389ACX-9 DPDT 220/240 VAC,50/60Hz W389ACX-10 AC OPERATED FLANGE MOUNT, 20 AMP 1100 W 4300 W 44 W 3PDT 110/120 VAC,50/60Hz W389ACX-14 3PDT 220/240 VAC,50/60Hz W389ACX-15 DC OPERATED FLANGE MOUNT, 25 AMP SPDT 12 VDC W389CX-2 SPDT 24VDC W389CX-3 DPDT 12 VDC W389CX-7 DPDT 24VDC W389CX-8 DC OPERATED FLANGE MOUNT, 20 AMP 3PDT 12 VDC W389CX-12 3PDT 24VDC W389CX-13 1200 W 4600 W W389ADCX-4 W389ADCX-5 W389ADZCX-3 RETROFITS POTTER & BRUMFIELD KUMP & KUHP. SEE END OF SECTION 1 FOR CROSS REFERENCE 1100 W 100 W 400 W 100 W 400 W 1700 W 72 W 1700 W 7200 W 100 W 400 W 100 W 400 W 100 W 400 W 9/04 1...37 300 HIGH CURRENT & HIGH VOLTAGE POWER RELAYS C US UL Recognized File No. E13224 F E AT U R E S B E N E F I T S 2 MILLIMETER CONTACT GAPS AND 8 MILLIMETER CREEPAGE AND CLEARANCE MEETS INTERNATIONAL REQUIREMENTS. WIDE SPACING BETWEEN STATIONARY CONTACT TERMINALS CLEARANCE FOR FULLY BOOTED QUICK CONNECT TERMINALS ARC BARRIERS BETWEEN CONTACTS IMPROVED DIELECTRIC STRENGTH BETWEEN CONTACT SETS. OPTIONAL BLOWOUT MAGNET HIGH VOLTAGE DC SWITCHING IMPROVED DIELECTRIC STRENGTH BETWEEN CONTACT 4000 Vrms DIELECTRIC BETWEEN MUTUALLY INSULATED CONDUCTIVE ELEMENTS AND FRAME. WIDE SELECTION OF MOUNTING OPTIONS ALLOWS INSTALLATIONS TO BE CUSTOMIZED 50758 COMPLIES WITH REQUIREMENTS OF * IEC STANDARDS 947-4-1 AND 947-5-1 LOW VOLTAGE DIRECTIVE = INTERNATIONAL * IEC ELECTROTECHNICAL COMMISSION TESTING AND EVALUATION * CE PERFORMED BY THE UNDERWRITERS LABORATORIES AS A THIRD PARTY PARTICIPANT STANDARD SIDE FLANGE COVER OPTIONAL TOP FLANGE MOUNT COVER OPTIONAL DIN MOUNT COVER MANUFACTURED UNDER ISO 9002 & QS 9000 GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % VA W Duty: CONTA CONTACTS Contact Material: Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): Minimum Recommended Load: A V A V HP HP ma TIMING Operate Time: Release Time: ms ms 85 80 10 10 110 10 3 2 Class B (130 C) or Class F (155 C) Continuous Silver alloy gold flashed 30 / 20 / 15 277 / 600 30 28 1 @ 120 2 @ 208 - 600 100 @ 5 VDC or 0.5 W 20 15 DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: V rms V rms V rms V rms megohms minimum @VDC 4000 1000 1000 Not applicable 1000 @ 500 C C C C C C -30 +60 -30 +50 -40 +105 LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : operations operations 100,000 10,000,000 MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: 94V-0 94V-0 IP Inch (mm) TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: Weight: 9/04 1...38 UNITS PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com grams Any Molded plastic Polycarbonate 40 0.250, 0.09 x 0.032 (6.35, 2.29 x 0.81 ) 85 300 HIGH CURRENT & HIGH VOLTAGE POWER RELAY DPDT, UP TO 30 AMPS UP TO 600 VAC OR 150 VDC WIRING DIAGRAM (VIEWED FROM PIN END) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS) . QUICK CONNECT SOLDER TERMINALS 1.90 MAX. (48.4) PRINTED CIRCUIT TERMINALS (12) 1 3 (22) (14) 4 6 (24) (11) 7 9 (21) (A1) A B (A2) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & 1.53 MAX. (38.8) ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE 2.50 MAX. (63.5) 2.90 MAX. (73.8) PRINTED CIRCUIT MOUNTING HOLE LAYOUT ( TOP VIEW ) ENCLOSED FLANGE MOUNT 1.53 MAX. (38.8) Optional Push Button 1.40 MAX. (35.5) 0.87 (22.2) 1 2 3 4 5 6 0.26 (6.73) 0.25 (6.40) A B 0.29 (7.94) 0.100 DIA. (2.54) ORDERING CODE F 300 XBX C1 LM -24D TEMPERATURE RATING: 130C COIL (CLASS B): NO CODE 155C COIL (CLASS F): CODE F CLASS: CONTACT CONFIGURATION: DPDT: XBX SPDT-DB-DM: XHX OPTIONAL: MAGNETIC BLOWOUT :CODE 69 CONSTRUCTION STYLE: * ENCLOSED, PLAIN COVER: CODE C ENCLOSED, FLANGE COVER: CODE C1 ENCLOSED TOP FLANGE MOUNT: CODE C3 ENCLOSED DIN MOUNT: CODE C4 TERMINAL STYLE: QUICK CONNECT SOLDER TERMINALS: NO CODE PRINTED CIRCUIT TERMINALS: CODE T OPTIONS: BI - POLAR L.E.D. STATUS LAMP: CODE L PUSH BUTTON: CODE M COIL VOLTAGE: 6, 12, 24, 120, 240 ADD A FOR AC COILS 6, 12, 24, 48, 110 ADD D FOR DC COILS * Note: Code C recommended to be used with printed circuit terminals only. COIL MEASURED @ 25 C STANDARD PART NUMBERS CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) AC OPERATED, 30 AMP 5400 W 300XBXC1-240A DPDT 220/240 VAC, 50/60Hz 1270 W 110/120 VAC, 50/60Hz 300XBXC1-120A DPDT 54 W 24 VAC, 50/60Hz 300XBXC1-24A DPDT 13.5 W 12 VAC, 50/60Hz 300XBXC1-12A DPDT DC OPERATED, 30 AMP 6300 W 110/125 VDC 300XBXC1-110D DPDT 300 W 24 VDC 300XBXC1-24D DPDT 75 W 12 VDC 300XBXC1-12D DPDT DC OPERATED, 30 AMP WITH MAGNETIC BLOWOUT 300XBX69C1-110D 300XBX69C1-24D 300XBX69C1-12D DPDT DPDT DPDT 110/125 VDC 24 VDC 12 VDC 6300 W 300 W 75 W 9/04 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 1...39 9A & 92 FLANGE MOUNT MINIATURE RELAYS UL CONTACT LOAD RATINGS TABLE FOR 9A C US UL Recognized File No. E43641 SPST SPDT LOAD LOAD VOLTAGE N.O. LOAD N.O.LOAD GENERAL PURPOSE 240 VAC 30 AMP 20 AMP RESISTIVE 28 VDC 30 AMP 30 AMP 10 AMP MOTOR 125 VAC 1 HP 1 HP 1/4 HP 240 VAC 2 HP 2 HP 1/2 HP 120 VAC 22/98 AMP 22/98 AMP FLA/LRA N.C. LOAD 10 AMP - 240 VAC 30/80 AMP 30/80 AMP TUNGSTEN 240 VAC 5 AMP 5 AMP - BALLAST 277 VAC 10 AMP 10 AMP 3 AMP PILOT DUTY 240 VAC 470 VA 470 VA 275 VA 12/30 AMP FLA = Full load amps, LRA = Locked rotor amps. UL CONTACT LOAD RATINGS TABLE FOR 92 RATING RESISTIVE LOAD MOTOR TUNGSTEN LRA/FLA PILOT DUTY LOAD VOLTAGE DPST-N.O. & DPDT DPDT N.O. LOAD N.C. LOAD 120/277 VAC 30 AMP 3 A MP 28 VDC 20 AMP 3 A MP 120 VAC 1 HP - 240 VAC 3 HP - 120 VAC 10 AMP - 240 VAC 96/22 - 110/25.3 - 3 AMP - 240 VAC CLASS "F" INSULATION 155 C. FLANGE MOUNTED. EPOXY SEALED WITH REMOVABLE TAPE SEAL OVER VENT HOLE (REMOVED AFTER CLEANING) GENER AL SPECIFICATIONS (@ 25 C ) UNITS COIL Pull-in Voltage AC (50/60 Hz):< % of nominal Pull-in Voltage DC:< % of nominal Dropout Voltage AC (50/60 Hz):> % of nominal Dropout Voltage DC:> % of nominal Maximum Voltage: % of nominal Resistance: % Coil Power AC (60 Hz): VA Coil Power DC: W Insulation System Per UL Standard 1446: Duty: CONTA CONTACTS Contact Configuration: Contact Material: Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): Pilot Duty (60 Hz): Minimum Recommended Load: A V A V HP HP VA ma TIMING Operate Time: Release Time: ms ms 80 75 10 10 120 10 9A: 2.8, 92: 4 9A: 1, 92: 1.7 Class F (155 C) Continuous 9A: SPST-NO & SPDT 92: DPST-NC & DPDT Silver alloy 30 9A: 240, 92: 277 9A: 30, 92: 20 28 9A: 1@120, 2@ 240 VAC 92: 1@120, 3@ 240 VAC 9A: 470, 92: 720 100 @ 5 VDC or 0.5 W 20 20 DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: V rms V rms V rms V rms megohms minimum @VDC 2500 1500 9A: Not applicable 92: 2500 Not Applicable 1000 @ 500 VIBR ATION RESIS TANCE Functional: gs 10 SHOCK RESIS TANCE Functional: gs 20 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -55 +85 -55 +85 -55 +105 LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : operations operations MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: 100,000 9A: 10,000,000 92: 5,000,000 94V-0 94V-0 IP Inch (mm) Weight: 9/04 1...40 UNITS PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com grams Any Molded plastic Polycarbonate 40 92: 0.250 x 0.032 (6.35 x 0.81 ) 9A: 33, 92: 86 9A FLANGE MOUNT MINIATURE RELAY SPST-N.O. & SPDT, 30 AMPS OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). A1 A1 A1 0.45 (11.4) 1.10 MAX. (27.9) FIG. A FIG. D FIG. B FIG. E FIG. C FIG. F 1.980 MAX. (50.29) 1.713 0.010 (43.51 0.25) B1 WITH OPTIONAL DIN ADAPTER 1.08 MAX. (27.4) 1.08 MAX. (27.4) WIRING DIAGRAM (VIEWED FROM PIN END) 2.56 (65.0) 1.27 MAX. (32.2) B1 0.071RAD. (1.80) FOR #6 SCREW(2 PLACES) A1 = 0.250 X 0.032 (6.35 X 0.81) Quick Connect Terminal B1 = 0.187 x 0.020 (4.78 x 0.508) Quick Connect Terminal OPTIONAL DIN ADAPTER 16-9A DIN-1 ORDERED AND SHIPPED SEPARATELY STANDARD FLANGE COVER COIL MEASURED @ 25 C STANDARD PART NUMBERS MEETS UL 873 AND UL 508 SPACING - (8MM) THRU AIR, (9.5 MM) OVER SURFACE CONTACT CONFIGURATION FLANGE MOUNT, 30 AMP W9AS1D52-5 SPST-NO W9AS1D52-12 SPST-NO W9AS1D52-24 SPST-NO W9AS1D52-110 SPST-NO FLANGE MOUNT, 20 AMP W9AS5D52-5 SPDT W9AS5D52-12 SPDT W9AS5D52-24 SPDT W9AS5D52-110 SPDT FLANGE MOUNT, 30 AMP W9AS1A52-24 SPST-NO W9AS1A52-120 SPST-NO W9AS1A52-240 SPST-NO FLANGE MOUNT, 20 AMP W9AS5A52-24 SPDT W9AS5A52-120 SPDT W9AS5A52-240 SPDT FIG. NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) A A A A 5 VDC 12 VDC 24 VDC 110/125 VDC 25 W 144 W 576 W 12100 W D D D D 5 VDC 12 VDC 24 VDC 110/125 VDC 25 W 144 W 576 W 12100 W F E E 24 VAC, 50/60 Hz 120 VAC, 50/60 Hz 240 VAC, 50/60 Hz 500 W 3,000 W 12,100 W C B B 24 VAC, 50/60 Hz 120 VAC, 50/60 Hz 240 VAC, 50/60 Hz 500 W 3,000 W 12,100 W 9/04 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 1...41 92 FLANGE / DIN MOUNT POWER RELAY DPST-N.O. & DPDT 30 AMPS WIRING DIAGRAM (VIEWED FROM PIN END) 6 8 W NE 2 4 0 1 OUTLINE DIMENSIONS 1.36 MAX. (34.5) 6 1.17 MAX (29.7) 8 0 FIG. D 2 6 2 4 8 6 4 2 0 1 2.7 MAX. (68.5) 0 1 FIG. B 2.35 0.005 (59.7 0.13) 6 8 2 4 2 1 FIG. A DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 1.00 0.010 (25.40) 6 8 6 FIG. E 2 4 6 8 6 2.06 MAX. (52.3) 0 1 FIG. C 2 4 2 0 1 FIG. F 1.63 MAX (41.4) 0.090 RED (2.29) FOR #8 SCREWS MEETS UL 873, UL 508 AND UL 1950 - (0.125 MM) THRU AIR, (0.25 MM) OVER SURFACE IMPROVED FLANGE COVER WITH DIN DIN MOUNT PART NUMBERS SUPERCEDES PART NUMBERS COIL MEASURED @ 25 C FIG. CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) 24 VAC, 50/60 Hz 120 VAC, 50/60 Hz 240 VAC (50/60 Hz) 24 VAC, 50/60 Hz 120 VAC, 50/60 Hz 240 VAC, 50/60 Hz 250 W 1,600 W 6,500 W 250 W 1,600 W 6,500 W AC OPERATED COIL FLANGE MOUNT, 30 AMP DUAL MARKED W92S7A22D-24 C DPST-NO W92S7A22-24 W92S7A22D-120 B DPST-NO W92S7A22-120 W92S7A22D-240 B DPST-NO W92S7A22-240 W92S11A22D-24 F DPDT W92S11A22-24 W92S11A22D-120 W92S11A22-120 E DPDT W92S11A22D-240 W92S11A22-240 E DPDT DC OPERATED COIL FLANGE MOUNT, 30 AMP W92S7D22D-12 A DPST-NO W92S7D22-12 W92S7D22D-24 A DPST-NO W92S7D22-24 W92S7D22D-110 A DPST-NO W92S7D22-110 W92S11D22D-12 D DPDT W92S11D22-12 W92S11D22D-24 D DPDT W92S11D22-24 W92S11D22D-110 W92S11D22-110 D DPDT 12 VDC 24 VDC 110/125 VDC 12 VDC 24 VDC 110/125 VDC 9/04 1...42 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 86 W 350 W 7,255 W 86 W 350 W 7,255 W 21/136 FLASH TRANSFER POWER RELAY C DPDT, 30 AMPS US UL Recognized File No. E43641 168986 BENEFITS MAGNECRAFT: W21ACPX-2 (UL RECOGNIZED ) (NOT UL RECOGNIZED ) 30 AMPS @ 120 / 240 VAC, 20 AMPS @ 28 VDC 15 AMPS @ 120 VAC, 15 AMPS @ 28 VDC HORSEPOWER RATING: 1-1/2 HP @ 120 VAC, 2 HP @ 240 VAC 1/4 HP @ 120 VAC, NOT UL RATED TUNGSTEN LOAD RATING: 2.4 KW @ 120 / 240 VAC 1 KW @ 120 / 240 VAC ELECTRICAL LIFE @ RATED LOAD: 200,000 OPERATIONS 100,000 OPERATIONS GENER AL SPECIFICATIONS (@ 25 C ) % of nominal % of nominal % of nominal % of nominal % of nominal % 65 Not Applicable 10 Not Applicable 10 Not Applicable Class B (130 C) A V A V Hp Hp ma TIMING Operate Time: Release Time: Silver alloy 30 240 20 28 1 1/2 @ 120 V 2 @ 240 V 100 @ 5 VDC or 0.5 W ms ms 20 20 V rms V rms V rms V rms megohms minimum @VDC 1500 500 1500 Not Applicable 1000 @ 500 C C C C C C Not Applicable Not Applicable -40 +80 -40 +130 operations operations 200,000 5,000,000 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: Weight: 7 8 7 8 5 6 5 6 3 4 3 4 1 2 1 2 136 21 RECTIFIED COIL MANUFACTURED UNDER ISO 9001 UNITS CONTA CONTACTS Contact Material: Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): Minimum Recommended Load: DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: (VIEWED FROM PIN END) MIDTEX: TYPE 136 CURRENT RATING: COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Insulation System Per UL Standard 1446: WIRING DIAGRAM 94V-0 94V-0 IP Inch (mm) grams Any Molded plastic polycarbonate 40 0.250 x 0.032 (6.35 x 0.81 ) 205 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com EXCEEDS NEMA STD. TS 2-1992 APPROVED BY D.O.T FOR: California Minnesota Georgia New York Illinois Texas Oregon Colorado Maryland MissouriNorth Carolina OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 1.85 MAX. (46.9) 2.84 MAX. (72.2) POLARIZING PIN 2.47 MAX. (62.7) 1.00 (25.4) 3.90 MAX. (99.2) Mating Sockets 70-TRF8-1, 70-TRB8-1 : SOLDER See section 7 COIL MEASURED @ 25 C NOMINAL STANDARD CONTACT CONFIGUINPUT PART RATION VOLTAGE NUMBER AC RECTIFIED - PLUG-IN, 30 AMP W21ACPX-2 136-627200 DPDT DPDT 110/120 VAC, 50/60Hz 110/120 VAC, 50/60Hz NOMINAL POWER 4.0 VA 10 VA 9/04 1...43 67 MINIATURE ENCLOSED INDUSTRIAL RELAY UL CONTACT LOAD RATINGS TABLE C US CONTACT CONFIGURATION CURRENT OR HORSE POWER LOAD VOLTAGE LOAD VOLTAGE FREQUENCY TYPE OF LOAD 5 AMP 120 VAC 50/60 Hz RESISTIVE 5 AMP 28 VDC DC RESISTIVE 3 AMP 120 VAC 50/60 Hz RESISTIVE 3 AMP 28 VDC DC RESISTIVE UL Recognized File No. E52197 1 POLE THRU 6 POLES BIFURCATED CONTACTS ( LOW LEVEL APPLICATIONS) STANDARD CLASS 67 MINIATURE INDUSTRIAL RELAYS ARE DESIGNED FOR APPLICATIONS REQUIRING DPDT TO 6PDT CONTACTS WHERE SPACE AND WEIGHT ARE OF PRIME IMPORTANCE. SHATTER RESISTANT, SEE-THRU PLASTIC COVERS ARE UTILIZED TO PROTECT AGAINST DUST, TAMPERING AND ELECTRICAL SHOCK. THE 67T MODELS HAVE BIFURCATED CONTACTS AND ARE DESIGNED FOR LOW LEVEL SWITCHING APPLICATIONS. GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: Duty: CONTA CONTACTS Contact Material: Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Minimum Recommended Load: TIMING Operate Time: Release Time: 9/04 1...44 UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % VA W 80 75 10 10 120 10 2.75 0.45 Class B (130 C) Continuous A V A V ma Silver alloy 5/3 120 / 120 5/3 28 / 28 100 @ 5 VDC or 0.5 W ms ms 25 20 DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: STANDARD CONTACTS (5 AMP CROSS BAR) UNITS V rms V rms V rms V rms megohms minimum @VDC 1500 1000 1000 1000 1000 @ 500 gs 10 SHOCK RESIS TANCE Functional: gs 20 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -40 +60 -40 +60 -40 +130 LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : operations operations 100,000 10,000,000 MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Terminals: 94V-0 94V-0 IP Inch (mm) VIBR ATION RESIS TANCE Functional: Weight: PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com grams Any Molded plastic Polycarbonate 40 0.10, 0.04 x 0.01 (2.54, 1.01 x 0.25 ) 22 to 40 67 MINIATURE ENCLOSED INDUSTRIAL RELAY DPDT THRU 6PDT 3 & 5 AMPS WIRING DIAGRAM 6PDT PRINTED CIRCUIT MOUNTING HOLE LAYOUT 4PDT ( TOP VIEW ) 0.40 (10.2) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS) . 0.060 0.002 DIA (1.5 0.5) SOLDER / PLUG-IN TERMINALS 0.32 (8.1) 0.42( 10.6) DPDT 0.53 (13.4) 4 0.21 (5.3) 1.20 MAX. (30.3) 0.110 (2.7) Elongated Hole 0.100 x 0.040 (2 x 0.1) PRINTED CIRCUIT TERMINALS DIM A 3-48 UNC Thread DIMENSIONS CONTACT CONFIGU A 6PDT 1.374 0.978 (34.9) (24.8) 4PDT 1.156 (29.4) DPDT 0.978 (24.8) PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 2 1 Mating Sockets 70-303-1, 70-305-1, 70-307-1: SOLDER 70-304-1, 70-306-1, 70-308-1: PRINTED CIRCUIT See section 7 0.45 (11.43) 0.73 MAX. (18.7) 3 COIL MEASURED @ 25 C STANDARD PART NUMBERS CONTACT CONFIGURATION NOMINAL INPUT VOLTAGE NOMINAL RESISTANCE (OHMS) DC OPERATED COIL - SOLDER/PLUG-IN, 5 AMP W67RCSX-1 5 VDC DPDT 52 W W67RCSX-2 12 VDC DPDT 185 W W67RCSX-3 24 VDC DPDT 700 W W67RCSX-4 48 VDC DPDT 2,500 W W67RCSX-5 110/125 VDC DPDT 15,000 W W67RCSX-6 5 VDC 4PDT 52 W W67RCSX-7 12 VDC 4PDT 185W W67RCSX-8 24 VDC 4PDT 700 W W67RCSX-9 48 VDC 4PDT 2,500W W67RCSX-10 110/125 VDC 4PDT 15,000 W W67RCSX-12 12 VDC 6PDT 90W W67RCSX-13 24 VDC 6PDT 430 W DC OPERATED COIL-BIFURCATED CONTACTS, 3 AMP W67TRCSX-2 12 VDC DPDT 185 W W67TRCSX-3 24 VDC DPDT 700 W W67TRCSX-7 12 VDC 4PDT 185 W W67TRCSX-8 24 VDC 4PDT 700 W W67TRCSX-12 12 VDC 6PDT 90 W W67TRCSX-13 24 VDC 6PDT 430 W DC OPERATED PRINTED CIRCUIT, 5 AMP W67RPCX-2 12 VDC DPDT 185 W W67RPCX-3 24 VDC DPDT 700 W W67RPCX-7 12 VDC 4PDT 185 W W67RPCX-8 24 VDC 4PDT 700 W W67RPCX-12 12 VDC 6PDT 90 W W67RPCX-13 24 VDC 6PDT 430 W AC OPERATED COIL - SOLDER/PLUG-IN, 5 AMP W67ARCSX-5 110/120 VAC, 50/60Hz DPDT 9000 W W67ARCSX-10 110/120 VAC, 50/60Hz 4PDT 8000 W W67ARCSX-15 110/120 VAC, 50/60Hz 6PDT 8000 W DC OPERATED COIL ULTRA SENSITIVE -SOLDER/PLUG-IN, 3 AMP W67SCSX-1 9.4 MADC DPDT 1,000 W W67SCSX-2 6.4 MADC DPDT 2,500 W W67SCSX-3 4.5 MADC DPDT 5,000 W W67SCSX-6 13.7 MADC 4PDT 1,000 W W67SCSX-7 9.1 MADC 4PDT 2,500 W W67SCSX-8 6.5 MADC 4PDT 5,000 W RETROFITS POTTER & BRUMFIELD R10. SEE END OF SECTION 1 FOR CROSS REFERENCE 9/04 1...45 219 PLUG-IN RELAY WITH INTEGRAL LOCKING CLIP UL CONTACT LOAD RATINGS TABLE CONTACT CONFIGURATION C US UL Recognized File No. E13224 ALL STYLES 168986 C CURRENT LOAD VOLTAGE LOAD VOLTAGE FREQUENCY TYPE OF LOAD 10 AMP 120 VAC 50/60 Hz RESISTIVE 5 AMP 240 VAC 50/60 Hz RESISTIVE 10 AMP 28 VDC DC RESISTIVE 0.5 AMP 125 VDC DC RESISTIVE 3 AMP 120 VAC 50/60 Hz INDUCTIVE 1 AMP 240 VAC 50/60 Hz INDUCTIVE 3 AMP 28 VDC DC 0.5 AMP CONTACTS CAN CLOSE ON 30 AMP LOADS AND CARRY 10 AMPS CONTINUOUSLY AT ALL VOLTAGES SHOWN INDUCTIVE 0.1 AMP INDUCTIVE DC 125 VDC SUFFIX 69 WITH BLOWOUT MAGNET FOR DC SWITCHING (NOT UL OR CSA) 1.5 AMP RESISTIVE DC 125 VDC 4 AMP RESISTIVE DC 125 VDC US LISTED 225G IND. CONT. EQ. WHEN USED WITH SOCKETS 27390D OR 33377D CURRENT LIMITED TO RATING OF RELAY OR SOCKET WHICHEVER IS LESS SINGLE MAKE AND DOUBLE MAKE 250 VDC DC RESISTIVE 1.5 AMP 250 VDC DC RESISTIVE 0.5 AMP 125 VDC DC INDUCTIVE 1.5 AMP 125 VDC DC INDUCTIVE 150 mA 250 VDC DC INDUCTIVE 250 VDC DC INDUCTIVE 0.5 AMP COIL SPECIFICATIONS @ 25C AC RELAYS, 50/60 HZ 5 VA (COIL DATA @ 60HZ ) DC RELAYS, 1.8 WATTS (2.5 W @ 125 VDC) Milliamperes Milliamperes Impedance Nominal Resistance Nominal Resistance Ohms Voltage Ohms 10% Voltage Ohms 10% Inrush (Open) Sealed (Pull-In) Cold Hot 1.1 6 6 7.2 304 1500 15.5 840 385 12 4.2 24 15.5 120 540 240 2100 410 27 12 63.5 189 147 375 200 120 24 / 28* 250 96 77 75 40 2700 32 375 86 62 17 13,400 115/125* 6200 20 16 750 32 OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS) . 2.625 MAX (66.6) OPTIONAL MANUAL ACTUATOR 0.250 (6.35) VDC & 110 VDC Relays * 24 Have Name Plates Stamped 3.062 MAX (77.77) 2.593 MAX (65.5) 3.406 MAX (86.5) 0.435 (11) LOCKING CLIP LOCKING CLIP 1 6 12 2 3 4 5 11 10 9 8 1.468 (37.2) 1 7 2 0.10 DIA. X 0.435 (2.54 X 11) TYPICAL OF ALL PIN DIMENSIONS 3 4 5 6 24-28 & 110-125 VDC Respectively. These Relays Operate At 80% Of The Lower Voltages And Operate Within Allowable Temperature Rises At 110% Of Higher Voltages. 250 VDC: Use 125 VDC Relay And Series Resistor ( 6000 W, 5 W ) Not Supplied. THE 219 COIL IS ENCAPSULATED IN THERMO-SET EPOXY FOR PROTECTION. THE BUILT-IN LOCKING CLIP ELIMINATES THE NEED FOR ANY EXTERNAL HOLD-DOWN DEVICE. NUCLEAR QUALIFIED VERSIONS ARE AVAILABLE. PLEASE CONSULT FACTORY. 9/04 1...46 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com 219 PLUG-IN RELAY WITH INTEGRAL LOCKING CLIP 12 & 14 PIN, 10 AMPS WIRING DIAGRAM (TOP VIEW) 6 1 7 12 219XBXP DPDT Mating Sockets 27390D, 33377D: SCREW/PANEL/DIN See section 7 GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Insulation System Per UL Standard 1446: Duty: UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % CONTA CONTACTS Contact Configuration: Contact Material: 85 80 10 10 110 10 Class B (130C) Continuous to 6PDT Silver alloy, gold diffused 10/5 120 / 120 10/5 28 / 28 100 @ 5 VDC or 0.5 W 6 1 7 12 219BBXP DPDT+2 NO 7 1 6 1 7 12 219ABAP DPDT+1NO & 1NC 219XDXP 4PDT 7 1 8 14 7 1 Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Minimum Recommended Load: A V A V ma TIMING Operate Time: Release Time: ms ms 25 20 V rms V rms V rms V rms megohms minimum @VDC 1500 1500 1500 1500 1000 @ 500 gs 10 CONTACT CONFIGURATION: DPDT: XBX DPDT +1 POLE: NO & 1 POLE NC: ABA 2 POLE: NO & DPDT: BBX 4 PDT: XDX 6 POLE: NO: FXX 4 POLE: NO & 2 POLE: NC: DXB SHOCK RESIS TANCE Functional: gs 20 OPTIONAL MAGNETIC BLOWOUT: CODE 69 TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: C C C C C C -40 +80 -40 +80 -40 +130 operations operations 100,000 10,000,000 94V-0 94V-0 IP grams Any Molded plastic polycarbonate 40 241 DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: VIBR ATION RESIS TANCE Functional: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: 219FXXP 6P-NO 219DXBP 4P-NO+2P-NC ORDERING CODE 219 XBX P L -24D CLASS: PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com OPTIONAL BIFURCATED CONTACTS: CODE 33 STANDARD FEATURES: POLYCARBONATE COVER: CODE P OPTIONAL FEATURES: STATUS LAMP: CODE L MANUAL ACTUATOR: CODE M COIL VOLTAGE: 6, 12, 24, 120, 240 ADD "A" FOR AC COILS 6, 12, 24, 48, 110 /125 ADD "D" FOR DC COILS COIL VOLTAGES & FREQUENCIES MUST BE SPECIFIED. Make before break and other contact configurations available, 9/04 1...47 750H OCTAL STYLE HERMETICALLY SEALED RELAY C UL Recognized File No. E43641 C F E AT U R E S US B E N E F I T S VACUUM BAKED & DRY REMOVES CONTAMINANTS AND PROVIDES NITROGEN FILLED A CLEAN & DRY ATMOSPHERE FOR CONTACTS. US LISTED 367G IND. CONT. EQ. WHEN USED WITH SOCKETS: 70-464-1, 70-465-1, 70-750D8-1 & 70-750D11-1 CURRENT LIMITED TO RATING OF RELAY OR SOCKET WHICHEVER IS LESS HERMETICALLY IDEAL FOR USE IN HAZARDOUS LOCATIONS. SEALED METAL UL CERTIFIED FOR CLASS 1 DIVISION 2 GROUP ENCLOSURE A, B, C & D HAZARDS. WHEN USED WITH 70-464-1, 70-465-1, 70-750D8-1 OR PLUG-IN STYLE 70-750D11-1 SOCKETS, MOUNTING THE 750H CAN BE DIN RAIL MOUNTED OR PANEL MOUNTED. CERTIFIED CLASS 1 DIVISION 2 FOR HAZARDOUS LOCATIONS UL GROUPS A, B, C & D GENER AL SPECIFICATIONS (@ 25 C ) COIL Pull-in Voltage AC (50/60 Hz):< Pull-in Voltage DC:< Dropout Voltage AC (50/60 Hz):> Dropout Voltage DC:> Maximum Voltage: Resistance: Coil Power AC (60 Hz): Coil Power DC: Insulation System Per UL Standard 1446: Duty: UNITS % of nominal % of nominal % of nominal % of nominal % of nominal % VA W CONTA CONTACTS Contact Material: Contact Rating AC Amperes (AC1): Contact Rating AC Voltage: Contact Rating DC Amperes (DC1): Contact Rating DC Voltage: Horse Power (AC): Horse Power (AC): Minimum Recommended Load: TIMING Operate Time: Release Time: A V A V HP HP ma ms ms 85 80 10 10 110 10 2.0 1.2 Class B (130 C) Continuous Silver alloy gold flashed 2 Pole-12, 3 Pole-10 120 / 240 10 30 1/2 @ 120 1/3 @ 240 100 @ 5 VDC or 0.5 W 15 10 DIELECTRIC S TRENGTH Coil to Contacts: Across Open Contacts: Pole to Pole: Contacts to Frame: Insulation Resistance: TEMPER ATURE Operating, AC Lower: Operating, AC Upper: Operating, DC Lower: Operating, DC Upper: Storage, Lower: Storage, Upper: LIFE EXPECTANC Y EXPECTANCY Electrical @ Rated Load (AC1): Mechanical @ no Load : MISCELLANEOUS Operating Position: Insulation Material: Enclosure Material: Cover Protection Category: Weight: 9/04 1...48 PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com UNITS V rms V rms V rms V rms megohms minimum @VDC 1250 500 1250 Not applicable 1000 @ 500 C C C C C C -45 +55 -45 +70 -45 +105 operations operations 100,000 5,000,000 94V-0 IP grams Any Molded plastic Steel 67 130 750H OCTAL STYLE HERMETICALLY SEALED RELAY DPDT, 12 AMPS 3PDT, 10 AMPS (12) (22) 5 (14) 4 3 6 (24) (A1) 2 7 (A2) 8 1 (11) (21) OUTLINE DIMENSIONS DIMENSIONS SHOWN IN INCHES & (MILLIMETERS). 2.05 MAX. (52.07) WIRING DIAGRAM (VIEWED FROM PIN END) 0.66 (16.76) 8 PIN 1.44 MAX. (36.5) 1.34 MAX. (34.0) 5 1.52 MAX. (38.6) 1.61 MAX. (40.8) 6 (21) (12) 4 7 3 1 11 6 7 (24) 8 (32) 9 (34) 10 (A1) 2 1 11 (A2) (11) (31) 9 2 5 (14) 3 8 4 (22) 10 8 PIN OCTAL BASE NOT SHOWN 11 PIN ALTERNATE NEMA OR IEC ( ) NUMBERS VIEWED FROM PIN SIDE Mating Sockets 70-750D8-1, 70-750D11-1, 70-464-1, 70-465-1: SCREW/DIN 70-169-1, 70-170-1: SCREW/PANEL See Section 7 STANDARD PART NUMBERS NEW PART NUMBER SUPERCEDES COIL MEASURED @ 25 C CONTACT CONFIGURATION AC OPERATED - 8 PIN OCTAL, 12 AMP 750XBXH-12A 750XBXH-24A W88AHPX-24 750XBXH-120A DC OPERATED - 8 PIN OCTAL, 12 AMP W88HPX-33 750XBXH-12D W88HPX-34 750XBXH-24D 750XBXH-110/125D AC OPERATED - 11 PIN OCTAL, 10 AMP 750XCXH-12A 750XCXH-24A *W88AHPX-36 750XCXH-120A DC OPERATED - 11 PIN OCTAL, 10 AMP 750XCXH-12D *W88HPX-51 750XCXH-24D 750XCXH-110/125D NOMINAL INPUT VOLTAGE DPDT DPDT DPDT 12 VAC, 50/60Hz 24 VAC, 50/60Hz 110/120 VAC, 50/60Hz 72 W 1,700 W 9,100 W DPDT DPDT DPDT 12 VDC 24 VDC 110/125 VDC 120 W 470 W 10,000 W 3PDT 3PDT 3PDT 12 VAC, 50/60Hz 24 VAC, 50/60Hz 110/120 VAC, 50/60Hz 72 W 1,700 W 9,100 W 3PDT 3PDT 3PDT 12 VDC 24 VDC 110/125 VDC 120 W 470 W 10,000 W * SOCKET CONNECTIONS TO TERMINALS 5 & 6 (21 & 22) MUST BE REVERSED PHONE: (843) 393-5778 FAX: (843) 393-4123 EMAIL: info@magnecraft.com NOMINAL RESISTANCE (OHMS) 9/04 1...49 SECTION 1 CROSS REFERENCE GUIDE MAGNECRAFT & STRUTHERS-DUNN IDEC 781XAXM4L-24A RH1B-L-AC24 781XAXM4L120A RH1B-L-AC120 781XAXM4L-220/230A RH1B-L-AC240 781XAXM4L-240A RH1B-L-AC240 781XAXM4L-12D RH1B-L-DC12 781XAXM4L-24D RH1B-L-DC24 781XAXM4L-110D RH1B-L-DC110 781XAXTM4L-120A RH1V2-L-AC120 781XAXTM4L-12D RH1V2-L-DC12 781XAXTM4L-24D RH1V2-L-DC24 781XAXC-24A RH1B-U-AC24 781XAXC-120A RH1B-U-AC120 781XAXC-24D RH1B-U-DC24 MAGNECRAFT & STRUTHERS-DUNN OMRON RELECO 782XAXM4L-12A C7-A10X/AC12 782XAXM4L-24A C7-A10X/AC24 782XAXM4L120A C7-A10X/AC115 782XAXM4L-220/230A C7-A10X/AC230 782XAXM4L-240A 782XAXM4L-12D C7-A10X/DC12 782XAXM4L-24D C7-A10X/DC24 782XAXM4L-110D C7-A10X/DC110 782XAXTM4L-12A C7-A10PX/AC12 782XAXTM4L-24A C7-A10PX/AC24 782XAXTM4L120A C7-A10PX/AC115 782XAXTM4L-12D C7-A10PX/DC12 782XAXTM4L-24D C7-A10PX/DC24 782XAXTM4L-110D 9/04 1...50 C7-A10PX/DC110 782XAXC-12A LY1-AC12 782XAXC-24A LY1-AC24 782XAXC120A LY1-AC110/120 782XAXC-220/230A LY1-AC220/240 782XAXC-240A LY1-AC220/240 782XAXCL-24A LY1N-AC24 782XAXCL120A LY1N-AC110/120 782XAXCL-240A LY1N-AC220/240 782XAXC-12D LY1-DC12 782XAXC-24D LY1-DC24 782XAXC-110D LY1-DC110 782XAXTCL-24D LY1N-DC24 782XAXTC-12A LY1-0-AC12 782XAXTC-24A LY1-0-AC24 782XAXTC-120A LY1-0-AC110/120 782XAXTC-12D LY1-0-DC12 782XAXTC-24D LY1-0-DC24 782XAXTC-110D LY1-0-DC110 THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. SECTION 1 CROSS REFERENCE GUIDE MAGNECRAFT & STRUTHERS-DUNN OMRON 782XBXM4L-24A LY212N-AC24 56.32.8024.20.94 C7-A20X/AC24 RY2-1012-26-5024-WTL 782XBXM4L120A LY212N-AC120 56.32.8120.20.94 C7-A20X/AC120 RY2-1012-26-5120-WTL 782XBXM4L-220/230A 56.32.8230.20.94 C7-A20X/AC230 RY2-1012-26-5230-WTL 782XBXM4L-240A 56.32.8240.20.94 FINDER RELECO IDEC RELPOL RY2-1012-26-5240-WTL 782XBXM4L-12D LY212N-DC12 56.32.9012.20.94 C7-A20X/DC12 RY2-1012-26-1012-WTL 782XBXM4L-24D LY212N-DC24 56.32.9024.20.94 C7-A20X/DC24 RY2-1012-26-1024-WTL 56.32.9110.20.94 C7-A20X/DC110 782XBXM4L-110D 782XBXC-6A RY2-1012-26-1110-WTL LY2-AC06 RH2B-U-AC6 RY2-1006-26-5006 782XBXC-24A LY2-AC24 RH2B-U-AC24 RY2-1012-26-5024 782XBXC120A LY2-AC110/120 RH2B-U-AC120 RY2-1012-26-5120 782XBXC220/230A LY2-AC220/240 RH2B-U-AC240 RY2-1012-26-5230 782XBXC240A LY2-AC220/240 RH2B-U-AC240 RY2-1012-26-5240 782XBXC-6D LY2-DC06 RH2B-U-DC6 RY2-1012-26-5006 782XBXC-12D LY2-DC12 RH2B-U-DC12 RY2-1012-26-1012 782XBXC-24D LY2-DC24 RH2B-U-DC24 RY2-1012-26-1024 782XBXC48D LY2-DC48 RH2B-U-DC48 RY2-1012-26-1048 782XBXC-110D LY2-DC110 RH2B-U-DC110 RY2-1012-26-1110 782XBXTC-24A LY2-0-AC24 C7-A20X/AC24 RH2V2-AC24 782XBXTC120A LY2-0-AC120 C7-A20X/AC115 RH2V2-AC120 782XBXTC-6D LY2-0-DC06 782XBXTC-12D LY2-0-DC12 C7-A20X/DC12 RH2V2-DC12 782XBXTC-24D LY2-0-DC24 C7-A20X/DC24 RH2V2-DC24 MAGNECRAFT & STRUTHERS-DUNN OMRON RH2V2-DC6 FINDER RELECO IDEC 783XCXM4L-24A RH3B-ULC-AC24 783XCXM4L-120A RH3B-ULC-AC120 783XCXM4L-220/230A 783XCXM4L-240A RH3B-ULC-AC240 783XCXM4L-12D RH3B-ULC-DC12 783XCXM4L-24D RH3B-ULC-DC24 783XCXM4L-110D RH3B-ULC-DC110 783XCXTM4L-120A RH3V2-ULC-AC120 783XCXTM4L-12D RH3V2-ULC-DC12 783XCXTM4L-24D RH3V2-ULC-DC24 783XCXC-24A LY3-AC24 RH3B-U-AC24 783XCXC-120A LY3-AC120 RH3B-U-AC120 783XCXC-240A LY3-AC240 RH3B-U-DC24 MAGNECRAFT & STRUTHERS-DUNN OMRON 784XDXM4L-24A LY412N-AC24 56.34.8024.20.94 RH4B-ULC-AC24 784XDXM4L-120A LY412N-AC120 56.34.8120.20.94 RH4B-ULC-AC120 FINDER RELECO IDEC 784XDXM4L-220/230A 56.34.8230.20.94 784XDXM4L-240A 56.34.8240.20.94 RH4B-ULC-AC240 784XDXM4L-12D LY412N-DC12 56.34.9012.20.94 RH4B-ULC-DC12 784XDXM4L-24D LY412N-DC24 56.34.9024.20.94 RH4B-ULC-DC24 784XDXM4L-110D 56.34.9110.20.94 RH4B-ULC-DC110 784XDXTM4L-120A 56.44.8120.20.94 RH4V2-ULC-AC120 THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. 9/04 1...51 SECTION 1 CROSS REFERENCE GUIDE MAGNECRAFT & STRUTHERS-DUNN OMRON FINDER RELECO IDEC 784XDXTM4L-12D 56.44.9012.20.94 RH4V2-ULC-DC12 784XDXTM4L-24D 56.44.9024.20.94 RH4V2-ULC-DC24 LY4-AC24 56.34.8024.20.94 RH4B-U-AC24 LY4-AC120 56.34.8120.20.94 RH4B-U-AC120 LY4-DC24 56.34.8240.20.94 RH4B-U-DC24 784XDXC-24A 784XDXC-120A 784XDXC-24D MAGNECRAFT & STRUTHERS-DUNN OMRON FINDER RELECO 782XDX3M4L-24A C9-T48X/AC24 782XDX3M4L120A C9-T48X/AC115 782XDX3M4L-220/230A C9-T48X/AC230 TYCO / SCHRACK RELPOL 782XDX3M4L-240A 782XDX3M4L-12D C9-T48X/DC12 782XDX3M4L-24D C9-T48X/DC24 782XDX3M4L-110D C9-T48X/DC110 782XDX1M4L-24A C9-A48X/AC24 782XDX1M4L120A C9-A48X/AC115 782XDX1M4L-220/230A C9-A48X/AC230 782XDX1M4L-240A 782XDX1M4L-12D C9-A48X/DC12 782XDX1M4L-24D C9-A48X/DC24 C9-A48X/DC110 782XDX1M4L-110D 9/04 1...52 782XDX2M4L-24A 55.34.8024.20.94 C9-T48X/AC24 PT570524 R4-2014-23-5024-WTL 782XDX2M4L120A 55.34.8120.20.94 C9-T48X/AC115 PT570615 R4-2014-23-5012-WTL 782XDX2M4L-220/230A 55.34.8230.20.94 C9-T48X/AC230 PT570730 R4-2014-23-5030-WTL 782XDX2M4L-240A 55.34.8240.20.94 PT570730 R4-2014-23-5040-WTL 782XDX2M4L-12D 55.34.9012.20.94 C9-T48X/DC12 PT570012 R4-2014-23-1012-WTL 782XDX2M4L-24D 55.34.9024.20.94 C9-T48X/DC24 PT570024 R4-2014-23-1024-WTL 782XDX2M4L-110D 55.34.9110.20.94 C9-T48X/DC110 PT570110 R4-2014-23-1110-WTL 782XDX3C-12A MY4Z-AC-12 782XDX3C-24 MY4Z-AC-24 782XDX3C-120A MY4Z-AC-120 782XDX3C-220/230A MY4Z-AC-220/230 782XDX3C-240A MY4Z-AC-240 782XDX3C-6D MY4Z-DC-6 782XDX3C-12D MY4Z-DC-12 782XDX3C-24D MY4Z-DC-24 782XDX3C-110D MY4Z-DC-110 782XDX1C-12A MY4-AC-12 782XDX1C-24 MY4-AC-24 782XDX1C-120A MY4-AC-120 782XDX1C-220/230A MY4-AC-220/230 782XDX1C-240A MY4-AC-240 782XDX1C-6D MY4-DC-6 782XDX1C-12D MY4-DC-12 782XDX1C-24D MY4-DC-24 782XDX1C-110D MY4-DC-110 782XDX2C-12A MY4-AC-12 R4-2014-23-5012 782XDX2C-120A MY4-AC-120 R4-2014-23-5120 THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. SECTION 1 CROSS REFERENCE GUIDE MAGNECRAFT & STRUTHERS-DUNN OMRON 782XDX2C-220/230A MY4-AC220/240 R4-2014-23-5012 782XDX2C-240A MY4-AC240 R4-2014-23-5120 782XDX2C-12D MY4-DC12 R4-2014-23-5230 782XDX2C-24D MY4-DC24 R4-2014-23-5240 782XDX2C-110D MY4-DC110 R4-2014-23-1012 782XDXT1C-24A MY4-02-AC24 R4-2014-23-1024 782XDXT1C-120A MY4-02-AC120 R4-2014-23-1110 782XDXT1C-12D MY4-02-DC12 782XDXT1C-24D MY4-02-DC24 782XDXT1C-110D MY4-02-DC110 FINDER RELECO 782XBX3M4L-24A C9-T28X/AC24 782XBX3M4L-120A C9-T28X/AC115 782XBX3M4L-220/230A C9-T28X/AC230 TYCO / SCHRACK RELPOL ALLENBRADLEY 782XBX3M4L-240A 782XBX3M4L-12D C9-T28X/DC12 782XBX3M4L-24D C9-T28X/DC24 C9-T28X/DC110 782XBX3M4L-110D 782XBX2M4L-24A 55.32.8024.20.94 C9-A20X/AC24 PT270524 782XBX2M4L-120A 55.32.8120.20.94 C9-A20X/AC115 PT270615 R2-2012-23-5120-WTL 700-HC24A1-1-4 782XBX2M4L-220/230A 55.32.8230.20.94 C9-A20X/AC230 PT270730 R2-2012-23-5230-WTL 700-HC24A2-1-4 782XBX2M4L-240A 55.32.8240.20.94 PT270730 R2-2014-23-5240-WTL 700-HC24A2-1-4 782XBX2M4L-12D PT270012 R2-2012-23-1012-WTL 700-HC24Z12-1-4 782XBX2M4L-24D 55.32.9012.20.94 C9-A20X/DC12 55.32.9024.20.94 C9-A20X/DC24 PT270024 R2-2012-23-1024-WTL 700-HC24Z24-1-4 782XBX2M4L-110D 55.32.9110.20.94 C9-A20X/DC110 PT270110 R2-2012-23-1110-WTL 700-HC24Z1-1-4 R2-2012-23-5024-WTL 700-HC24A24-1-4 MAGNECRAFT TYCO / SCHRACK & STRUTHERS-DUNN HERMECLCALLY SEALED 782XDXH10-24A KHS17A11-24 782XDXH10-120A KHS17A11-120 782XDXH10-12D KHS17D11-12 782XDXH10-24D KHS17D11-24 782XDXH10-110D KHS17D11-110 782XDXH21-120A KHS17A12-120 782XDXH21-12D KHS17D12-12 782XDXH21-24A KHS17A12-24 MAGNECRAFT & STRUTHERS-DUNN OMRON FINDER RELECO TYCO / P & B / SCHRACK RELPOL ALLENBRADLEY MK2PN-S-AC24 60.12.8024.20.70 C2-A20X/AC24 KRPA-11ANFP-24 or MT228024 R15-2012-23-5024-WTL 700-HA32A24-1-4 MK2PN-S-AC120 60.12.8120.20.70 C2-A20X/AC120 KRPA-11ANFP-120 or MT228115 R15-2012-23-5210-WTL 700-HA32AA1-1-4 750XBXM4L-220/240A MK2PN-S-AC240 60.12.8204.20.70 C2-A20X/AC240 KRPA-11ANFP-240 or MT228240 R15-2012-23-5230-WTL 700-HA32A2-1-4 MK2PN-S-DC12 60.12.9012.20.70 C2-A20X/DC12 KRPA-11DNFP-12 or MT223012 R15-2012-23-1012-WTL 700-HA32Z12-1-4 750XBXM4L-12D 750XBXM4L-24A 750XBXM4L-120A 750XBXM4L-24D 750XBXM4L-110D 750XCXM4L-24A MK2PN-S-DC24 60.12.9024.20.70 C2-A20X/DC24 KRPA-11DNFP-24 or MT223024 R15-2012-23-1024-WTL 700-HA32Z24-1-4 MK2PN-S-DC110 60.12.9110.20.70 C2-A20X/DC110 KRPA-11DNFP-24 or MT223110 R15-2012-23-1110-WTL 700-HA32Z1-1-4 MK3PN-S-AC24 60.13.8024.20.70 C3-A30X/AC24 KRPA-14DNFP-24 or MT328024 R15-2012-23-5024-WTL 700-HA33A24-1-4 MK3PN-S-AC120 60.13.8120.20.70 C3-A30X/AC120 KRPA-14ANFP-120 or MT322115 R15-2012-23-5210-WTL 700-HA33AA1-1-4 750XCXM4L-220/240A MK3PN-S-AC240 60.13.8204.20.70 C3-A30X/AC240 KRPA-14ANFP-240 or MT328240 R15-2012-23-5230-WTL 700-HA33A2-1-4 MK3PN-S-DC12 60.13.9012.20.70 C3-A30X/DC12 KRPA-14DNFP-12 or MT323012 R15-2012-23-1012-WTL 700-HA33Z12-1-4 750XCXM4L-12D MK3PN-S-DC24 60.13.9024.20.70 C3-A30X/DC24 KRPA-14DNFP-24 or MT323024 R15-2012-23-1024-WTL 700-HA32Z24-1-4 750XCXM4L-24D 750XCXM4L-120A 750XCXM4L-110D MK3PN-S-DC110 60.13.9110.20.70 C3-A30X/DC110 KRPA-14DNFP-24 or MT323110 R15-2012-23-1110-WTL THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. 9/04 1...53 SECTION 1 CROSS REFERENCE GUIDE MAGNECRAFT & STRUTHERS-DUNN IDEC MK2P-S-AC24 KRPA-11AG-24 RH2P-U-AC24 750XBXC-120A MK2P-S-AC120 KRPA-11AG-120 RH2P-U-AC120 750XBXC-220/240A MK2P-S-AC240 KRPA-11AG-240 750XBXC-12D MK2P-S-DC12 KRPA-11DG-12 RH2P-U-DC12 750XBXC-24D MK2P-S-DC24 KRPA-11DG-24 RH2P-U-DC24 750XBXC-110D MK2P-S-DC110 KRPA-11DG-110 RH2P-U-DC110 750XCXC-24A MK3P5-S-AC24 KRPA-14AG-24 RH3P-U-AC24 750XCXC-120A MK3P5-S-AC120 KRPA-14AG-120 RH3P-U-AC120 750XCXC-220/240A MK3P5-S-AC240 KRPA-14AG-240 RH3P-U-AC240 750XCXC-12D MK3P5-S-DC12 KRPA-14DG-12 RH3P-U-DC12 750XCXC-24D MK3P5-S-DC24 KRPA-14DG-24 RH3P-U-DC24 750XCXC-110D MK3P5-S-DC110 KRPA-14DG-110 RH3P-U-DC110 FINDER RELECO TYCO / P & B / SCHRACK IDEC ALLENBRADLEY RELPOL 788XBXM4L-24A 62.32.8024.00.70 C5-A20X/AC24 RR2BA-U-AC24 700-HB32A24-1-4 788XBXM4L-120A 62.32.8120.00.70 C5-A20X/AC120 RR2BA-U-AC120 700-HB32AA1-1-4 788XBXM4L-220/240A 62.32.8204.00.70 C5-A20X/AC240 RR2BA-U-AC240 700-HB32A2-1-4 788XBXM4L-12D 62.32.9012.00.70 C5-A20X/DC12 RR2BA-U-DC12 700-HB32Z12-1-4 788XBXM4L-24D 62.32.9024.00.70 C5-A20X/DC24 RR2BA-U-DC24 700-HB32Z24-1-4 788XBXM4L-110D 62.32.9110.00.70 C5-A20X/DC110 RR2BA-U-DC110 700-HB32Z1-1-4 788XCXM4L-24A 62.33.8024.00.70 C5-A30X/AC24 RR3BA-U-AC24 700-HB33A24-1-4 788XCXM4L-120A 62.33.8120.00.70 C5-A30X/AC120 RR3BA-U-AC120 700-HB33AA1-1-4 788XCXM4L-220/240A 62.33.8204.00.70 C5-A30X/AC240 RR3BA-U-AC240 700-HB33A2-1-4 788XCXM4L-12D 62.33.9012.00.70 C5-A30X/DC12 RR3BA-U-DC12 700-HB33Z12-1-4 788XCXM4L-24D 62.33.9024.00.70 C5-A30X/DC24 RR3BA-U-DC24 700-HB32Z24-1-4 788XCXM4L-110D 62.33.9110.00.70 C5-A30X/DC110 RR3BA-U-DC110 788XBXC-24A KUP-11A45 (or F) -24 or RM202524 RUC-1012-26-5024 788XBXC-120A KUP-11A45- (or F) 120 or RM202615 RUC-1012-26-5210 788XBXC-220/240A KUP-11A45- (or F) 240 or RM202730 RUC-2012-26-5230 788XBXC-12D KUP-11D45- (or F) 12 or RM202012 RUC2012-26-1012 788XBXC-24D KUP-11D45- (or F) 24 or RM202024 RUC-2012-26-1024 788XBXC-110D KUP-11D45- (or F) 110 or RM202110 RUC-2012-26-1110 788XCXC-24A KUP-14A45- (or F) 24 or RM302524 RUC-2013-26-5024 788XCXC-120A KUP-14A45- (or F) 120 or RM302615 RUC-013-26-5210 788XCXC-220/240A KUP-14A45- (or F) 240 or RM302730 RUC-2013-26-5230 788XCX-12D KUP-14D45- (or F) 12 or RM302012 RUC-2013-26-1012 788XCX-24D KUP-14D45- (or F) 24 or RM302024 RUC-2013-26-1024 788XCXC-110D KUP-14D45- (or F) 110 or RM302110 RUC-2013-23-1110 MAGNECRAFT & STRUTHERS-DUNN OMRON TYCO / P & B / SCHRACK IDEC DELTROL A283XAXC-24A MJN1C-AC24 KUP5A15 (or F) - 24 RR1BA-U-AC24V 20306-82 A283XAXC-120A MJN1C-AC120 KUP5A15 (or F) - 120 RR1BA-U-AC120V 20306-84 A283XAXC-240A MJN1C-AC240 KUP5A15 (or F) - 240 RR1BA-U-AC240V 20306-85 20307-82 A283XBXC-24A MJN2C-AC24 KUP11A15 (or F) - 24 RR2BA-U-AC24V A283XBXC-120A MJN2C-AC120 KUP11A15 (or F) - 120 RR2BA-U-AC120V 20307-84 A283XBXC-240A MJN2C-AC240 KUP11A15 (or F) - 240 RR2BA-U-AC240V 20307-85 A283XCXC-24A MJN3C-AC24 KUP14A15 (or F) - 24 RR3B-U-AC24V 20308-82 KUP14A15 (or F) - 120 RR3B-U-AC120V 20308-84 A283XCXC-120A 1...54 TYCO / P & B / SCHRACK 750XBXC-24A MAGNECRAFT & STRUTHERS-DUNN 9/04 OMRON MJN3C-AC120 THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. SECTION 1 CROSS REFERENCE GUIDE MAGNECRAFT & STRUTHERS-DUNN OMRON TYCO / POTTER & BRUMFIELD IDEC DELTROL 20308-85 A283XCXC-240A MJN3C-AC240 KUP14A15 (or F) - 240 RR3B-U-AC240V A283XAXC-12D MJN1C-DC12 KUP5D15 (or F) - 12 RR1BA-U-DC12V 20309-81 A283XAXC-24D MJN1C-DC24 KUP5D15 (or F) - 24 RR1BA-U-DC24V 20309-82 MJN2C-DC12 KUP11D15 (or F) - 12 RR2BA-U-DC12V 20310-81 20310-82 A283XBXC-12D A283XBXC-24D MJN2C-DC24 KUP11D15 (or F) - 24 RR2BA-U-DC24V A283XBXC-110D MJN2C-DC110 KUP11D15 (or F) - 110 RR2B-U-DC110V 20310-84 A283XCXC-12D MJN3C-DC12 KUP14D15 (or F) - 12 RR3B-U-DC12V 20311-81 MJN3C-DC24 KUP14D15 (or F) - 24 RR3B-U-DC24V 20311-82 20545-84 A283XCXC-24D A283XAXC1-120A MJN1CF-AC120 KUP5A55 (or F) - 120 RR1BA-US-AC120V A283XAXC1-240A MJN1CF-AC240 KUP5A55 (or F) - 240 RR1BA-US-AC240V 20545-85 A283XBXC1-120A MJN2CF-AC120 KUP11A55 (or F) - 120 RR2BA-US-AC120V 20546-84 MJN2CF-AC240 KUP11A55 (or F) - 240 RR2BA-US-AC240V 20546-85 20547-84 A283XBXC1-240A A283XCXC1-120A MJN3CF-AC120 KUP14A55 (or F) - 120 RR3B-US-AC120V A283XCXC1-240A MJN3CF-AC240 KUP14A55 (or F) - 240 RR1BA-US-DC240V 20547-85 A283XAXC1-12D MJN1CF-DC12 KUP5D55 (or F) - 12 RR1BA-US-DC12V 20551-81 A283XAXC1-24D MJN1CF-DC24 KUP11D55 (or F) - 24 RR2BA-US-DC24V 20551-82 20552-81 A283XBXC1-12D MJN2CF-DC12 KUP11D55 (or F) - 12 RR2BA-US-DC12V A283XBXC1-24D MJN2CF-DC24 KUP11D55 (or F) - 24 RR2B-US-DC24V 20552-82 A283XCXC1-24D MJN3CF-DC24 KUP14D55 (or F) - 24 RR3B-US-DC24V 20553-82 TYCO / SCHRACK FINDER A283XBX69C-120A KUEP-11A15-120 A283XBX69C-12D KUEP-11D15-12 A283XBX69C-24D KUEP-11D15-24 A283BXX69C-24D KUEP-7D15-24 A283BXX69C-48D KUEP-7D15-48 A283XBX69C-110D KUEP-11D15-110 A283HXX69C-120A KUEP-3A15-120 A283HXX69C-12D KUEP-3D15-12 A283HXX69C-24D KUEP-3D15-24 A283HXX69C-48D KUEP-3D15-48 A283HXX69C-110D MAGNECRAFT & STRUTHERS-DUNN KUEP-3D15-110 TYCO / POTTER & BRUMFIELD 388JXCXC1M-240A KUMP-14A68-240 RM333740 388JXCXC1M-120A KUMP-14A68-120 RM333615 388JXCXC1M-12D KUMP-14D68-12 RM333012 388JXCXC1M-24D KUMP-14D68-24 RM333024 388JXCXCM-240A KUMP-14A28-240 RM332740 6233 8240 0040 388JXCXCM-120A KUMP-14A28-120 RM332615 6233 8120 0040 388JXCXCM-12D KUMP-14D28-12 RM332012 6233 9012 0040 388JXCXCM-24D KUMP-14D28-24 RM332024 6233 9024 0040 388JXBXC1M-240A KUMP-11A68-240 RM233740 388JXBXC1M-120A KUMP-11A68-120 RM233615 388JXBXC1M-12D KUMP-11D68-12 RM233012 388JXBXC1M-24D KUMP-11D68-24 RM233024 388JXBXCM-240A KUMP-11A28-240 RM232740 6232 8240 0040 388JXBXCM-120A KUMP-11A28-120 RM232615 6232 8120 0040 388JXBXCM-12D KUMP-11D28-12 RM232012 6232 9012 0040 388JXBXCM-24D KUMP-11D28-24 RM232024 6232 9024 0040 THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. 9/04 1...55 SECTION 1 CROSS REFERENCE GUIDE MAGNECRAFT & STRUTHERS-DUNN TYCO / POTTER & BRUMFIELD TYCO / SCHRACK FINDER 62.33 8240.0310 388VCXXCM-220/240A KUGP-12A15-240 RM632740 388VCXXCM-120A KUGP-12A15-120 RM632615 62.33 8120.0310 388VCXXCM-24A KUGP-12A15-24 RM632524 62.32 8024.0310 388VBXXCM-220/240A KUGP-7A15-240 RM532740 62.22 8240.0310 388VBXXCM-120A KUGP-7A15-120 RM532615 62.23 8120.0310 388VBXXCM-24A KUGP-7A15-24 RM532524 62.23 8024.0310 388VCXXCM-24D KUGP-12D15-24 RM632024 62.32 9024.0310 388VCXXCM-12D KUGP-12D15-12 RM632012 62.32 9012.0310 388VBXXCM-24D KUGP-7D15-24 RM532024 62.32 9024.0310 388VBXXCM-12D KUGP-7D15-12 RM532012 62.33 9012.0310 TYCO / SCHRACK MAGNECRAFT & STRUTHERS-DUNN FINDER 389FXCXC1M-240A RM735740 389FXCXC1M-120A RM735615 6283 8120 0040 389FXBXC1M-240A RM835740 6282 8240 0040 389FXBXC1M-120A RM83561 6282 8240 0040 389FXCXC1M-12D RM735024 6283 9024 0040 389FXCXC1M-24D RM735012 6283 9012 0040 389FXBXC1M-12D RM835024 6282 9024 0040 389FXBXC1M-24D RM835012 6282 9012 0040 TYCO / POTTER & BRUMFIELD TYCO / SCHRACK DELTROL W389ADCX-4 KUMP-3A5G-120 RMD 05 615 0840-84 W389ADCX-5 KUMP-3A5G-240 RMD 05 740 20840-85 W389ADZCX-3 KUMP-6A5G-24 RMC 05 524 W389ADZCX-4 KUMP-6A5G-120 RMC 05 615 W389DCX-2 KUMP-3D5G-12 RMD 05 012 20848-81 W389DCX-3 KUMP-3D5G-24 RMD 05 024 20848-82 W389DZCX-2 KUMP-6D5G-12 RMC 05 012 W389DZCX-3 KUMP-6D5G-24 RMC 05 024 W389ACX-4 KUHP-5A51-120 W389ACX-8 KUHP11A51-24 MAGNECRAFT & STRUTHERS-DUNN W389ACX-9 KUHP11A51-120 W389ACX-10 KUHP11A51-240 W389ACX-14 - W389ACX-15 - W389CX-2 KUHP5D51-12 W389CX-3 KUHP5D51-24 6283 8240 0040 W389CX-7 W389CX-8 W389CX-12 W389CX-13 MAGNECRAFT & STRUTHERS-DUNN 9/04 1...56 DELTROL 300XBXC1-240A 20844-85 300XBXC1-120A 20844-84 300XBXC1-24A 20844-82 300XBXC1-12A 20844-81 THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. SECTION 1 CROSS REFERENCE GUIDE MAGNECRAFT & STRUTHERS-DUNN DELTROL 300XBXC1-110D 20852-84 300XBXC1-24D 20852-82 300XBXC1-12D 20852-81 MAGNECRAFT & STRUTHERS-DUNN TYCO / POTTER & BRUMFIELD AMERICAN ZETTLER W9AS1D52-5 T9AS1D52-5 AZ2280-1A-5DEF W9AS1D52-12 T9AS1D52-12 AZ2280-1A-12DEF W9AS1D52-24 T9AS1D52-24 AZ2280-1A-24DEF W9AS1D52-48 T9AS1D52-48 AZ2280-1A-48DEF W9AS1D52-110 T9AS1D52-110 AZ2280-1A-110DEF W9AS5D52-5 T9AS5D52-5 AZ2280-1C-5DEF W9AS5D52-12 T9AS5D52-12 AZ2280-1C-12DEF W9AS5D52-24 T9AS5D52-24 AZ2280-1C-24DEF W9AS5D52-48 T9AS5D52-48 AZ2280-1C-48DEF W9AS5D52-110 T9AS5D52-110 AZ2280-1C-110DEF W9AS1A52-24 AZ2280-1A-24AEF W9AS1A52-120 AZ2280-1A-120AEF W9AS1A52-240 AZ2280-1A-240AEF W9AS5A52-24 AZ2280-1C-24AEF W9AS5A52-120 AZ2280-1C-120AEF W9AS5A52-240 AZ2280-1C-240AEF MAGNECRAFT & STRUTHERS-DUNN TYCO / POTTER & BRUMFIELD AMERICAN ZETTLER OMRON AROMAT W92S7D22-12 T92P7D22-12 AZ2800-2A-12D G7L-2A-TUB-CB-DC12 HE2aN-Q-DC12V W92S7D22-24 T92P7D22-24 AZ2800-2A-24D G7L-2A-TUB-CB-DC24 HE2aN-Q-DC24V W92S7D22-110 T92P7D22-110 AZ2800-2A-110D G7L-2A-TUB-CB-DC110 HE2aN-Q-DC110V W92S11D22-12 T92P11D22-12 AZ2800-2C-12D W92S11D22-24 T92P11D22-24 AZ2800-2C-24D W92S11D22-110 T92P11D22-110 AZ2800-2C-110D W92S7A22-24 T92P7A22-24 AZ2800-2A-24AE G7L-2A-TUB-CB-AC24 HE2aN-Q-AC24V W92S7A22-120 T92P7A22-120 AZ2800-2A-120AE G7L-2A-TUB-CB-AC120 HE2aN-Q-AC120V W92S7A22-240 T92P7A22-240 AZ2800-2A-240AE G7L-2A-TUB-CB-AC240 HE2aN-Q-AC240V W92S11A22-24 T92P11A22-24 AZ2800-2C-24AE W92S11A22-120 T92P11A22-120 AZ2800-2C-120AE W92S11A22-240 T92P11A22-240 AZ2800-2C-240AE MAGNECRAFT & STRUTHERS-DUNN TYCO / POTTER & BRUMFIELD W67RCSX-1 R10E1(X or Y)2-V28 W67RCSX-2 R10E1(X or Y)2-V185 W67RCSX-3 R10E1(X or Y)2-V700 W67RCSX-4 R10E1(X or Y)2-V2.5K W67RCSX-5 R10E1(X or Y2-V15.0K W67RCSX-6 R10E1(X or Y)4-V28 W67RCSX-7 R10E1(X or Y)4-V185 W67RCSX-8 R10E1(X or Y)4-V700 W67RCSX-9 R10E1(X or Y)4-V2.5K W67RCSX-10 R10E1(X or Y)4-V15.0K THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED. 9/04 1...57 SECTION 1 CROSS REFERENCE GUIDE MAGNECRAFT & STRUTHERS-DUNN W67RCSX-12 R10E1(X or Y)6-V90 W67RCSX-13 R10E1(X or Y)6-V430 W67TRCSX-2 R10E1(P or Z)2-V185 W67TRCSX-3 R10E1(P or Z)2-V700 W67TRCSX-7 R10E1(P or Z)4-V185 W67TRCSX-8 R10E1(P or Z)4-V700 W67TRCSX-12 R10E1(P or Z)6-V90 W67TRCSX-13 R10E1(P or Z)6-V430 W67RPCX-2 R10E2(X or Y)2-V185 W67RPCX-3 R10E2(X or Y)2-V700 W67RPCX-7 R10E2(X or Y)4-V185 W67RPCX-8 R10E2(X or Y)4-V700 W67RPCX-12 R10E2(X or Y)6-V90 W67RPCX-13 R10E2(X or Y)6-V430 W67ARCSX-5 R10E1(X or Y)2-120V W67ARCSX-10 R10E1(X or Y)4-120V W67ARCSX-15 R10E1(X or Y)6-120V W67SCSX-1 R10SE1(X or Y)2-J1.0K W67SCSX-2 R10SE1(X or Y)2-J2.5K W67SCSX-3 R10SE1(X or Y)2-J5.0K W67SCSX-6 R10SE1(X or Y)4-J1.0K W67SCSX-7 R10SE1(X or Y)4-J2.5K W67SCSX-8 R10SE1(X or Y)4-J5.0K MAGNECRAFT & STRUTHERS-DUNN KR11AGE (or GF) 12 750XBXH-24A KR11AGE (or GF) 24 750XBXH-120A KR11AGE (or GF) 120 750XBXH-12D KR11DGE (or GF) 12 750XBXH-24D KR11DGE (or GF) 24 750XBXH-110D KR11DGE (or GF) 110 750XCXH-12A KR14AGE (or GF) 12 750XCXH-24A KR14AGE (or GF) 24 750XCXH-120A KR14AGE (or GF) 120 750XCXH-12D KR14DGE (or GF) 12 750XCXH-24D KR14DGE (or GF) 24 750XCXH-110D KR14DGE (or GF) 110 W21ACPX-2 1...58 TYCO / POTTER & BRUMFIELD 750XBXH-12A MAGNECRAFT & STRUTHERS-DUNN 9/04 TYCO / POTTER & BRUMFIELD U . S. A. MAGNECRAFT & STRUTHERS-DUNN 700 ORANGE STREET DARLINGTON, SC. 29532-3739 TEL.: (843) 393-5421 FAX: (843) 393-4123 WEBSITE: www.magnecraft.com EMAIL: info@magnecraft.com EUR OPE MAGNECRAFT & STRUTHERS-DUNN OFFICE MUNICH FORSTENRIEDER ALLEE 227 D 81476 MUNCHEN/GERMANY TEL.: 4989 75080310 FAX: 4989 7559344 EMAIL: renatesteinback@magnecraft.de FOR SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS APPLICATION ENGINEERING A SSIS TANCE Chuck Johnson, PRODUCT MANAGER FAX: (847) 441-2522 EMAIL: cjohnson@magnecraft.com Joe Zintel, PRODUCT MANAGER FAX: (847) 441-2522 EMAIL: jzintel@magnecraft.com TYCO / POTTER & BRUMFIELD 136-62T3A1 THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS. CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED.