FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers tm Features Description AC input response (FOD814 only) The FOD814 consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a silicon phototransistor output in a 4-pin dual in-line package. The FOD617/817 Series consists of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 4-pin dual in-line package. Applicable to Pb-free IR reflow soldering Compact 4-pin package Current transfer ratio in selected groups: FOD617A: 40-80% FOD817: 50-600% FOD617B: 63-125% FOD817A:80-160% FOD617C: 100-200% FOD817B: 130-260% FOD617D: 160-320% FOD817C:200-400% FOD814: 20-300% FOD817D:300-600% FOD814A: 50-150% C-UL, UL and VDE approved High input-output isolation voltage of 5000Vrms Minimum BVCEO of 70V guaranteed Higher operating temperatures (versus H11AXXX counterparts) Applications FOD814 Series AC line monitor Unknown polarity DC sensor Telephone line interface FOD617 and FOD817 Series Power supply regulators Digital logic inputs Microprocessor inputs Functional Block Diagram ANODE, CATHODE 1 4 COLLECTOR CATHODE, ANODE 2 3 EMITTER ANODE 1 CATHODE 2 FOD814 (c)2006 Fairchild Semiconductor Corporation FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 4 COLLECTOR 3 EMITTER FOD617/817 1 4 1 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers May 2006 Value Symbol Parameter FOD814 Units FOD617/817 TOTAL DEVICE TSTG Storage Temperature TOPR Operating Temperature TSOL Lead Solder Temperature PTOT Total Power Dissipation -55 to +150 -55 to +105 C -55 to +110 C 260 for 10 sec C 200 mW EMITTER IF Continuous Forward Current 50 50 - 6 mA VR Reverse Voltage PD Power Dissipation Derate above 100C 70 1.7 mW mW/C VCEO Collector-Emitter Voltage 70 V VECO Emitter-Collector Voltage DETECTOR 6 6 (FOD817) 7 (FOD617) V IC Continuous Collector Current 50 mA PC Collector Power Dissipation Derate above 90C 150 2.9 mW mW/C 2 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Absolute Maximum Ratings (TA = 25C Unless otherwise specified.) Individual Component Characteristics Symbol Parameter Device Test Conditions Min. Typ.* Max. Unit Forward Voltage FOD814 IF = 20mA - 1.2 1.4 V FOD617 IF = 60mA - 1.35 1.65 FOD817 IF = 20mA - 1.2 1.4 FOD617 VR = 6.0V - 0.001 10 FOD817 VR = 4.0V - - 10 FOD814 V = 0, f = 1kHz - 50 250 FOD617 V = 0, f = 1kHz - 30 250 FOD817 V = 0, f = 1kHz - 30 250 EMITTER VF IR Reverse Leakage Current Terminal Capacitance Ct A pF DETECTOR ICEO BVCEO BVECO Collector Dark Current FOD814 VCE = 20V, IF = 0 - - 100 FOD617C/D VCE = 10V, IF = 0 - 1 100 FOD617A/B VCE = 10V, IF = 0 - 1 50 FOD817 VCE = 20V, IF = 0 - - 100 FOD814 IC = 0.1mA, IF = 0 70 - - FOD617 IC = 100A, IF = 0 70 - - FOD817 IC = 0.1mA, IF = 0 70 - - FOD814 IE = 10A, IF = 0 6 - - FOD617 IE = 10A, IF = 0 7 - - FOD817 IE = 10A, IF = 0 6 - - Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage nA V V Transfer Characteristics (TA = 25C Unless otherwise specified.) Symbol DC Characteristic CTR Current Transfer Ratio Device Test Conditions Min. Typ.* Max. Unit FOD814 5V(1) 20 - 300 % 50 - 150 40 - 80 FOD617B 63 - 125 FOD617C 100 - 200 160 - 320 13 - - FOD617B 22 - - FOD617C 34 - - FOD617D 56 - - 50 - 600 FOD817A 80 - 160 FOD817B 130 - 260 FOD817C 200 - 400 FOD817D 300 - 600 - 0.1 0.2 IF = 1mA, VCE = FOD814A FOD617A IF = 10mA, VCE = 5V(1) FOD617D FOD617A FOD817 VCE (sat) Collector-Emitter Saturation Voltage IF = 1mA, VCE = 5V(1) IF = 5mA, VCE = 5V(1) FOD814 IF = 20mA, IC = 1mA FOD617 IF = 10mA, IC = 2.5mA - - 0.4 FOD817 IF = 20mA, IC = 1mA - 0.1 0.2 V *Typical values at TA = 25C 3 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Electrical Characteristics (TA = 25C Unless otherwise specified.) Symbol AC Characteristic Device Test Conditions Min. Typ.* Max. Unit fC Cut-Off Frequency FOD814 VCE = 5V, IC = 2mA, RL = 100, -3dB 15 80 - kHz tr Response Time (Rise) FOD814 VCE = 2 V, IC = 2mA, RL = 100(2) - 4 18 s - 3 18 s FOD617 FOD817 tf Response Time (Fall) FOD814 FOD617 FOD817 Isolation Characteristics Symbol VISO Characteristic Device Input-Output Isolation Voltage(3) FOD814 FOD617 Test Conditions f = 60Hz, t = 1 min, II-O 2A Min. Typ.* Max. 5000 Units Vac(rms) FOD817 RISO Isolation Resistance FOD814 VI-O = 500VDC 5x1010 1x1011 -- 0.6 1.0 pf FOD617 FOD817 CISO Isolation Capacitance FOD814 VI-O = 0, f = 1 MHz FOD617 FOD817 *Typical values at TA = 25C Notes: 1. Current Transfer Ratio (CTR) = IC/IF x 100%. 2. For test circuit setup and waveforms, refer to page 4. 3. For this test, Pins 1 and 2 are common, and Pins 3 and 4 are common. 4 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Transfer Characteristics (Continued) (TA = 25C Unless otherwise specified.) COLLECTOR POWER DISSIPATION PC (mW) 200 150 100 50 0 -55 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE TA (C) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) 6 Fig. 3 Collector-Emitter Saturation Voltage vs. Forward Current Ic = 0.5m A 1m A 3m A 5m A 5 4 2 1 0 2.5 5.0 7.5 10.0 12.5 FORWARD CURRENT IF (mA) CURRENT TRANSFER RATIO CTR ( %) FORWARD CURRENT IF (mA) 0 -55 -40 -20 0 20 40 60 80 100 120 75oC o 50 C 25oC 0oC o -30 C o -55 C 1.5 75oC o 50 C 10 25oC 0oC o -30 C 1 o -55 C 140 1.0 1.5 2.0 120 V = 5V Ta= 25C 100 5 FOD617/817 80 60 40 FOD814 20 0 0. 1 0.2 2.0 FORWARD VOLTAGE VF (V) FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 o TA = 105 C Fig. 6 Current Transfer Ratio vs. Forward Current TA = 110 C 1.0 50 FORWARD VOLTAGE VF (V) o 0.1 0.5 100 0.1 0.5 15.0 Fig. 5 Forward Current vs. Forward Voltage (FOD617/817) 100 1 150 Ta = 25C 3 10 200 Fig. 4 Forward Current vs. Forward Voltage (FOD814) 100 7m A 0 Fig. 2 Collector Power Dissipation vs. Ambient Temperature (FOD617/817) AMBIENT TEMPERATURE TA (C) FORWARD CURRENT IF (mA) COLLECTOR POWER DISSIPATION PC (mW) Fig. 1 Collector Power Dissipation vs. Ambient Temperature (FOD814) 0.5 1 2 5 10 20 50 100 FORWARD CURRENT IF (mA) www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Typical Electrical/Optical Characteristics (TA = 25C Unless otherwise specified.) Fig. 8 Collector Current vs. Collector-Emitter Voltage (FOD617/817) Fig. 7 Collector Current vs. Collector-Emitter Voltage (FOD814) 30 50 I F = 30m A 40 20 m A 30 Pc (M AX.) 10m A 20 I IF = 30mA COLLECTOR CURRENT IC (mA) COLLECTOR CURRENT IC (mA) Ta= 25C 5m A 10 20mA 25 Pc(MAX.) 20 15 10mA 10 5m A 5 1m A 0 0 0 0 10 20 30 40 50 60 70 80 90 100 COLLECTOR-EMITTER VOLTAGE VCE (V) Fig. 9 Relative Current Transfer Ratio vs. Ambient Temperature Fig. 10 Collector-Emitter Saturation Voltage vs. Ambient Temperature COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) FOD814 IF = 1 mA VCE = 5V 140 120 100 80 FOD617/817 IF = 5mA VCE = 5V 60 40 20 0 -60 -40 -20 0 Fig. 11 LED Power Dissipation vs. Ambient Temperature (FOD814) I = 20mA F 0.10 IC = 1mA 0.08 0.06 0.04 0.02 Fig. 12 LED Power Dissipation vs. Ambient Temperature (FOD617/817) LED POWER DISSIPATION PLED (mW) 100 80 60 40 20 0 -55 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE TA (C) 6 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 0.12 0.00 -60 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE TA (C) 20 40 60 80 100 120 AMBIENT TEMPERATURE TA (C) LED POWER DISSIPATION PLED (mW) 10 20 30 40 50 60 70 80 90 COLLECTOR-EMITTER VOLTAGE VCE (V) 160 RELATIVE CURRENT TRANSFER RATIO (%) Ta = 25C 100 80 60 40 20 0 -55 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE TA (C) www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Typical Electrical/Optical Characteristics (Continued) (TA = 25C Unless otherwise specified.) Fig. 13 Response Time vs. Load Resistance RESPONSE TIME (s) 50 20 VCE = 2V Ic= 2mA Ta = 25C Fig. 14 Frequency Response tr VOLTAGE GAIN AV (dB) 100 tf 10 5 td 2 ts 1 0.5 VCE = 2V Ic = 2mA Ta = 25C 0 RL=10k 1k 100 -10 0.2 -20 0.2 0.1 COLLECTOR DARK CURRENT ICEO (nA) 0.1 0.2 0.5 1 2 5 LOAD RESISTANCE RL (k) 10 0.5 15 2 10 100 FREQUENCY f (kHz) 1000 Fig. 15 Collector Dark Current vs. Ambient Temperature 10000 VCE = 20V 1000 100 10 1 0.1 0.01 -60 -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE TA (C) Test Circuit for Frequency Response Test Circuit for Response Time Vcc Input RD Input Vcc Output RL Output RD 10% RL Output 90% td ts tr tf 7 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Typical Electrical/Optical Characteristics (Continued) (TA = 25C Unless otherwise specified.) Package Dimensions (Surface Mount) 0.276 (7.00) 0.236 (6.00) 0.200 (5.10) 0.161 (4.10) 0.312 (7.92) 0.288 (7.32) 0.200 (5.10) 0.161 (4.10) SEATING PLANE SEATING PLANE 0.312 (7.92) 0.288 (7.32) 0.157 (4.00) 0.118 (3.00) 0.276 (7.00) 0.236 (6.00) 0.157 (4.00) 0.118 (3.00) 0.010 (0.26) 0.130 (3.30) 0.091 (2.30) 0.051 (1.30) 0.043 (1.10) 0.020 (0.51) TYP 0.024 (0.60) 0.004 (0.10) 0.412 (10.46) 0.388 (9.86) 0.010 (0.26) 0.150 (3.80) 0.110 (2.80) 0.110 (2.79) 0.090 (2.29) 0.300 (7.62) typ Lead Coplanarity 0.004 (0.10) MAX 0.024 (0.60) 0.016 (0.40) 0.110 (2.79) 0.090 (2.29) Footprint Dimensions (Surface Mount) Package Dimensions (0.4" Lead Spacing) SEATING PLANE 0.049 (1.25) 0.030 (0.76) 0.200 (5.10) 0.161 (4.10) 0.157 (4.00) 0.118 (3.00) 1.3 0.276 (7.00) 0.236 (6.00) 0.291 (7.40) 0.252 (6.40) 0.130 (3.30) 0.091 (2.30) 0.110 (2.80) 0.011 (1.80) 0.150 (3.80) 0.110 (2.80) 0.024 (0.60) 0.016 (0.40) 1.5 0.312 (7.92) 0.288 (7.32) 9 0.010 (0.26) 0.110 (2.79) 0.090 (2.29) 2.54 0.42 (10.66) 0.38 (9.66) Note: All dimensions are in inches (millimeters). 8 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Package Dimensions (Through Hole) Option Part Number Example Description S FOD814S Surface Mount Lead Bend SD FOD814SD Surface Mount; Tape and reel W FOD814W 0.4" Lead Spacing 300 FOD814300 VDE Approved 300W FOD814300W VDE Approved, 0.4" Lead Spacing 3S FOD8143S VDE Approved, Surface Mount 3SD FOD8143SD VDE Approved, Surface Mount, Tape & Reel Marking Information 4 5 V X ZZ Y 3 814 6 2 1 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code 5 Two digit work week ranging from `01' to `53' 6 Assembly package code 9 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Ordering Information P2 O1.550.05 P0 1.750.1 F W B0 A0 P1 0.30.05 K0 Note: All dimensions are in millimeters. Description Symbol Dimensions in mm (inches) Tape wide W 16 0.3 (.63) Pitch of sprocket holes P0 4 0.1 (.15) Distance of compartment F P2 7.5 0.1 (.295) 2 0.1 (.079) Distance of compartment to compartment P1 12 0.1 (.472) Compartment A0 10.45 0.1 (.411) B0 5.30 0.1 (.209) K0 4.25 0.1 (.167) 10 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Carrier Tape Specifications Temperature (C) Tp Tsmax Ramp-down Tsmin 25C Soldering zon ts (Preheat) Time (sec) Profile Feature Pb-Sn solder assembly Lead Free assembly Preheat condition (Tsmin-Tsmax / ts) 100C ~ 150C 60 ~ 120 sec 150C ~ 200C 60 ~120 sec Melt soldering zone 183C 60 ~ 120 sec 217C 30 ~ 90 sec Peak temperature (Tp) 240 +0/-5C 260 +0/-5C Ramp-down rate 6C/sec max. 6C/sec max. Recommended Wave Soldering condition Profile Feature For all solder assembly Peak temperature (Tp) Max 260C for 10 sec 11 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers Lead Free Recommended IR Reflow Condition The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FAST(R) FASTrTM ActiveArrayTM FPSTM BottomlessTM FRFETTM Build it NowTM GlobalOptoisolatorTM CoolFETTM GTOTM CROSSVOLTTM HiSeCTM DOMETM I2CTM EcoSPARKTM 2 i-LoTM E CMOSTM ImpliedDisconnectTM EnSignaTM IntelliMAXTM FACTTM FACT Quiet SeriesTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM ScalarPumpTM SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TCMTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHCTM UniFETTM UltraFET(R) VCXTM WireTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDiS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILDiS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I19 12 FOD814 Series, FOD617 Series, FOD817 Series Rev. 1.0.5 www.fairchildsemi.com FOD814 Series, FOD617 Series, FOD817 Series 4-Pin High Operating Temperature Phototransistor Optocouplers TRADEMARKS