To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. CR05AS-8 Thyristor Low Power Use REJ03G0348-0400 Rev.4.00 Dec 10, 2008 Features * IT (AV) : 0.5 A * VDRM : 400 V * IGT : 100 A * Non-Insulated Type * Planar Passivation Type Outline RENESAS Package code: PLZZ0004CA-A (Package name: UPAK) 1 2 G K P RENESAS Package code: de: PLZ LZZ0004CB-A (Package name: SOTOT-89)) OT-89 3 L O E 4 4 2, 4 1 2 3 3 1. 2. 3. 4. Cathode Anode Gate Anode 1 Applications Solid state relay, strobe flasher, igniter, and hybrid IC Maximum Ratings Parameter Repetitive peak reverse voltage Non-repetitive peak reverse voltage DC reverse voltage Repetitive peak off-state voltageNote1 DC off-state voltageNote1 REJ03G0348-0400 Rev.4.00 Dec 10, 2008 Page 1 of 8 Symbol VRRM VRSM VR (DC) VDRM VD (DC) Voltage class 8 (Mark CD) 400 500 320 400 320 Unit V V V V V CR05AS-8 Parameter Symbol Ratings Unit IT (RMS) IT (AV) 0.79 0.5 A A ITSM 10 A I2t 0.4 A2s PGM PG (AV) VFGM VRGM IFGM Tj Tstg -- 0.1 0.01 6 6 0.1 - 40 to +125 - 40 to +125 50 W W V V A C C mg RMS on-state current Average on-state current Surge on-state current I2t for fusing Peak gate power dissipation Average gate power dissipation Peak gate forward voltage Peak gate reverse voltage Peak gate forward current Junction temperature Storage temperature Mass Conditions Commercial frequency, sine half wave Note2 180 conduction, Ta = 57C 60Hz sine half wave 1 full cycle, peak value, non-repetitive Value corresponding to 1 cycle of half wave 60Hz, surge on-state current Typical value Notes: 1. With gate to cathode resistance RGK = 1 k. Electrical Characteristics Parameter Symbol Rated value Min. Typ. Max. -- -- 0.1 -- -- 0.1 Unit Repetitive peak reverse current Repetitive peak off-state current IRRM IDRM On-state voltage VTM -- -- 1.9 V Ta = 25C, ITM = 1.5 A, instantaneous value Gate trigger voltage VGT -- -- 0.8 V Tj = 25C, VD = 6 V, Note4 IT = 0.1 A Gate non-trigger voltage VGD 0.2 -- -- V Tj = 125C, VD = 1/2 VDRM, RGK = 1 k Gate trigger current IGT 20 -- 100Note3 A Tj = 25C, VD = 6 V, Note4 IT = 0.1 A Holding current IH -- -- 3 mA Rth (j-a) -- -- 70 C/W Tj = 25C, VD = 12 V, RGK = 1 k Note2 Junction to ambient Thermal resistance mA mA Test conditions Tj = 125C, VRRM applied Tj = 125C, VDRM applied, RGK = 1 k Notes: 2. Soldering with ceramic plate (25 mm x 25 mm x t0.7 mm). 3. If special values of IGT are required, choose item E from those listed in the table below if possible. Item B E IGT (A) 20 to 50 20 to 100 The above values do not include the current flowing through the 1 k resistance between the gate and cathode. 4. IGT, VGT measurement circuit. A1 3V DC IGS IGT A3 A2 RGK 1 1k Switch 2 60 TUT V1 6V DC VGT Switch 1 : IGT measurement Switch 2 : VGT measurement (Inner resistance of voltage meter is about 1k) REJ03G0348-0400 Rev.4.00 Dec 10, 2008 Page 2 of 8 CR05AS-8 Performance Curves 102 7 Ta = 25C 5 3 2 Surge On-State Current (A) 10 101 7 5 3 2 100 7 5 3 2 1 2 3 4 Gate Voltage (V) 101 7 5 3 2 100 7 5 3 2 10-1 7 5 3 2 5 4 3 2 1 2 3 4 5 7 101 2 3 4 5 7 102 Gate Trigger Current vs. Junction Temperature VFGM = 6V PGM = 0.1W PG(AV) = 0.01W VGT = 0.8V IGT = 100A (Tj = 25C) VGD = 0.2V IFGM = 0.1A 103 7 5 3 2 Typical Example 102 7 5 3 2 101 7 5 3 2 100 -60 -40 -20 0 20 40 60 80 100 120 140 Gate Current (mA) Junction Temperature (C) Gate Trigger Voltage vs. Junction Temperature Maximum Transient Thermal Impedance Characteristics (Junction to ambient) 0.9 Gate Trigger Voltage (V) 6 Gate Characteristics 1.0 Distribution 0.7 0.6 7 Conduction Time (Cycles at 60Hz) 10-2 10-2 2 3 5 710-12 3 5 7 100 2 3 5 7 101 2 3 5 7 102 0.8 8 On-State Voltage (V) 102 7 5 3 2 9 0 100 5 x 100 (%) 0 Gate Trigger Current (Tj = tC) Gate Trigger Current (Tj = 25C) 10-1 Rated Surge On-State Current Typical Example 0.5 0.4 0.3 0.2 0.1 0 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (C) REJ03G0348-0400 Rev.4.00 Dec 10, 2008 Page 3 of 8 Transient Thermal Impedance (C/W) On-State Current (A) Maximum On-State Characteristics 100 2 3 5 7 101 2 3 5 7 102 2 3 5 7 103 103 7 25x25xt0.7 5 Aluminum Board 3 2 102 7 5 3 2 101 7 5 3 2 100 10-3 2 3 5 710-2 2 3 5 710-1 2 3 5 7 100 Time (s) CR05AS-8 Allowable Ambient Temperature vs. Average On-State Current (Single-Phase Half Wave) Maximum Average Power Dissipation (Single-Phase Half Wave) 160 = 30 60 90 120 180 1.0 0.5 360 Resistive, inductive loads 0 0 Ambient Temperature (C) Average Power Dissipation (W) 1.5 25x25xt0.7 140 Aluminum Board 120 Resistive, inductive loads Natural convection 100 80 60 = 30 40 90 60 20 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 360 0 180 120 0.2 0.8 0.6 0.4 Average On-State Current (A) Average On-State Current (A) Maximum Average Power Dissipation (Single-Phase Full Wave) Allowable Ambient Temperature vs. Average On-State Current (Single-Phase Full Wave) 0.5 360 Ambient Temperature (C) 180 1.0 25x25xt0.7 140 Aluminum Board 360 120 Resistive loads Natural convection 100 80 60 40 60 = 30 20 120 90 180 Resistive loads 0 Average Power Dissipation (W) 90 = 30 60 120 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 0.2 0.4 0.8 0.6 Average On-State Current (A) Average On-State Current (A) Maximum Average Power Dissipation (Rectangular Wave) Allowable Ambient Temperature vs. Average On-State Current (Rectangular Wave) 90 180 = 30 60 120 270 1.5 DC 1.0 0.5 360 0 0 Resistive, inductive loads 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Average On-State Current (A) REJ03G0348-0400 Rev.4.00 Dec 10, 2008 Page 4 of 8 160 Ambient Temperature (C) Average Power Dissipation (W) 160 1.5 25x25xt0.7 140 Aluminum Board 120 360 Resistive, inductive loads Natural convection 100 80 60 DC 40 = 30 60 20 0 120 90 0 0.2 0.4 270 180 0.6 Average On-State Current (A) 0.8 Typical Example 140 120 100 RGK = 1k 80 60 40 20 0 -40 -20 0 20 40 60 80 100 120 140 160 Breakover Voltage (RGK = rk) Breakover Voltage (RGK = 1k) 160 Breakover Voltage vs. Gate to Cathode Resistance 120 Typical Example Tj = 125C 100 80 60 40 20 0 10-1 2 3 5 7100 2 3 5 7101 2 3 5 7 102 Junction Temperature (C) Gate to Cathode Resistance (k) Breakover Voltage vs. Rate of Rise of Off-State Voltage Holding Current vs. Junction Temperature 100 80 60 #2 40 #1 Typical Example 20 # 1 IGT(25C = 10A) # 2 IGT(25C = 66A) Tj = 125C, RGK = 1k 0 0 10 2 3 5 7101 2 3 5 7 102 2 3 5 7 10 3 Holding Current (mA) 120 102 7 5 3 2 101 7 5 3 2 Tj = 25C IH (25C) = 1mA IGT(25C) = 25A Distribution Typical Example 100 7 5 3 2 10-1 -60 -40 -20 0 20 40 60 80 100 120 140 Junction Temperature (C) Holding Current vs. Gate to Cathode Resistance Repetitive Peak Reverse Voltage vs. Junction Temperature 500 Typical Example IGT(25C) IH(1k) 13A 1.6mA #1 59A 1.8mA #2 400 #1 300 #2 200 100 Tj = 25C 0 10-1 2 3 5 7 100 2 3 5 7101 2 3 5 7102 Gate to Cathode Resistance (k) REJ03G0348-0400 Rev.4.00 Dec 10, 2008 Page 5 of 8 x 100 (%) Rate of Rise of Off-State Voltage (V/s) Repetitive Peak Reverse Voltage (Tj = tC) Repetitive Peak Reverse Voltage (Tj = 25C) Holding Current (RGK = rk) Holding Current (RGK = 1k) x 100 (%) Breakover Voltage (dv/dt = vV/s) Breakover Voltage (dv/dt = 1V/s) x 100 (%) Breakover Voltage (Tj = tC) Breakover Voltage (Tj = 25C) x 100 (%) Breakover Voltage vs. Junction Temperature x 100 (%) CR05AS-8 160 Typical Example 140 120 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 120 140 160 Junction Temperature (C) CR05AS-8 Gate Trigger Current (tw) Gate Trigger Current (DC) x 100 (%) Gate Trigger Current vs. Gate Current Pulse Width 103 7 5 4 3 2 #1 #2 Typical Example IGT(25C) #1 10A #2 66A 102 7 5 4 3 2 Tj = 25C 101 0 10 2 3 4 5 7 101 2 3 4 5 7 102 Gate Current Pulse Width (s) REJ03G0348-0400 Rev.4.00 Dec 10, 2008 Page 6 of 8 CR05AS-8 Package Dimensions Previous Code UPAK / UPAKV RENESAS Code PLZZ0004CA-A 4.5 0.1 1.5 1.5 3.0 Package Name SOT-89 JEITA Package Code SC-62 0.4 RENESAS Code PLZZ0004CB-A 0.44 Max Previous Code (0.2) 0.53 Max 0.48 Max (1.5) 2.5 0.1 4.25 Max 1 Unit: mm 1.5 0.1 0.44 Max 0.8 Min 1.8 Max MASS[Typ.] 0.050g (2.5) JEITA Package Code SC-62 (0.4) Package Name UPAK MASS[Typ.] 0.48g Unit: mm G K P L O E 4.6Max 1.5 0.1 4.2Ma Max 0.8Min n 2.5 5 0.1 1.6 0.2 0.58Max 1.5 3.0 REJ03G0348-0400 Rev.4.00 Dec 10, 2008 Page 7 of 8 0.48Max +0.03 0.4 -0.05 CR05AS-8 Order Code Lead form Surface-mounted type Standard packing Taping Quantity 4000 Standard order code Type name - ET +Direction (1 or 2) + 4 Note : Please confirm the specification about the shipping in detail. REJ03G0348-0400 Rev.4.00 Dec 10, 2008 Page 8 of 8 Standard order code example CR05AS-8-ET14 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 (c) 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2