P-NS
Vishay Thin Film
Document Number: 60023 For technical questions, contact: thin-film@vishay.com www.vishay.com
Revision: 31-Jul-08 53
Commercial Thin Film Chip Resistors
SURFACE MOUNT
CHIPS
For applications requiring low noise, stability, low
temperature coefficient of resistance, and low voltage
coefficient, all VISHAY’s proven precision thin film
wraparound resistors will meet your exact requirements.
Manufactured with the same material and processes as
QPL and manufactured in a QPL facility.
CONSTRUCTION
FEATURES
•Lead (Pb)-free or Sn/Pb terminations available
•Moisture resistant (SPM) special passivation
method
•Non-standard values available
•Pre-tinned terminations over nickel barrier (Gold available)
•
Very low noise and voltage coefficient (< - 30 dB, 0.1 ppm/V)
•Non-inductive
•Laser-trimmed tolerances to 0.02 %
•In-lot tracking less than 5 ppm/°C
•Epoxy bondable termination available
TYPICAL PERFORMANCE
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
* Pb containing terminations are not RoHS compliant, exemptions may apply
A
ctual Size
0505
Adhesion Layer
High Purity
Alumina Substrate
Nickel barrier
Solder
coating
Passivated Nichrome
Resistive Film
SPM Passivation
Enhancement
ABS
TCR 25
TOL 0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST SPECIFICATIONS CONDITIONS
Material Passivated nichrome
Absolute TCR ± 25 ppm/°C (available to ± 10 ppm/°C) - 55 °C to + 125 °C
Absolute Tolerance ± 0.1 % (available to ± 0.02 %) + 25 °C
Power Rating See table
Voltage Coefficient 0.1 ppm/V typical
Working Voltage See table
Operating Temperature Range - 55 °C to + 125 °C
Storage Temperature Range - 55 °C to + 150 °C
Noise < - 35 dB typical
CASE SIZE POWER RATING - (mW) MAX WORKING VOLTAGE RESISTANCE RANGE - (Ω)
≥ 0.1 % < 0.1 % ≥ 0.1 % < 0.1 % ≥ 0.1 % < 0.1 %
0402 50 50 75 75 25 - 75K 250 - 70K
0502 100 100 75 75 20 - 130K 250 - 130K
0505 150 150 75 75 20 - 301K 250 - 301K
0603 150 150 75 75 10 - 175K 250 - 175K
0805 (1), 0705 (1) 250 200 100 100 10 - 475K 250 - 475K
1005 250 250 100 100 10 - 649K 250 - 649K
1010 500 500 150 100 50 - 1M 250 - 1M
1206 400 400 200 200 10 - 1M 250 - 1M
1505 400 400 150 150 10 - 1M 250 - 1M
2208 800 750 150 150 10 - 1.75M 250 - 1M
2010 800 750 200 150 10 - 2M 250 - 1M
2512 1000 750 200 200 10 - 3M 250 - 1M
Available
Pb-free
RoHS*
COMPLIANT
P-NS
Vishay Thin Film Commercial Thin Film Chip Resistors
www.vishay.com For technical questions, contact: thin-film@vishay.com Document Number: 60023
54 Revision: 31-Jul-08
SURFACE MOUNT
CHIPS
DIMENSIONS in inches
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering)
DERATING CURVE
CASE SIZE TERM L W T D E
0402 B 0.042 ± 0.008 0.022 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.010 ± 0.005
0502 B 0.055 ± 0.006 0.025 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005
0505 B 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005
0603 B 0.064 ± 0.006 0.032 ± 0.005 0.020 Max. 0.012 ± 0.005 0.015 ± 0.005
0805 (1), 0705 (1) B 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005
1005 B 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1010 B 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
1206 B 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005, - 0.010 0.020 + 0.005, 0.010
1505 B 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005
2010 B 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2208 B 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2512 B 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
D
W
L
T
E
ENVIRONMENTAL TESTS
Environmental Test 10 kΩ ΔR ± (%) 100 kΩ ΔR ± (%)
Thermal Shock 0.02 0.02
Short Time Overload 0.01 0.01
Low Temperature Operation 0.01 0.01
Resistance to Solder Heat 0.04 0.03
Moisture Resistance 0.02 0.01
High Temperature Exposure 0.03 0.06
Load life (10 000 h, + 70 °C) 0.05 0.05
TCR ± 25 ppm/°C ± 25 ppm/°C
Ambient Temperature °C
0 70 125 150
0
20
40
60
80
100
Percent of Rated Power
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P-1206E1002BBTS (preferred part number format)
GLOBAL
MODEL
CASE
SIZE
TCR
CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING
P- 0402
0502
0505
0603
0805
1005
1010
1206
1505
2208
2010
2512
Y = ± 10 ppm/°C*
D = ± 15 ppm/°C
E = ± 25 ppm/°C**
H = ± 50 ppm/°C
K = ± 100 ppm/°C
* > 250 Ω
** > 25 Ω
The first 3 digits
are significant
figures and the
last digit
specifies the
number of zeros
to follow.
“R” designates
the decimal
point.
Example:
10R0 = 10 Ω
1001 = 1 kΩ
1002 = 10 kΩ
Q = ± 0.02 %*
A = ± 0.05 %*
B = ± 0.1 %
D = ± 0.5 %
F = ± 1 %
G = ± 2 %
J = ± 5 %
* For values
≥ 1 kΩ
B = Wraparound
Sn/Pb solder
63 % Sn/37 % Pb
w/ nickel barrier
G = Wraparound Au
over Ni (gold)
termination
epoxy bondable
RoHS compliant - e4
S = Wraparound lead
(Pb)-free solder
96.5 % Sn/3.0 % Ag/
0.5 % Cu
RoHS compliant - e1
BS =BULK
100 Min 1 Mult
WS =WAFFLE
100 Min 1 Mult
TAPE AND REEL
T0 = 100 Min 100 Mult
T1 = 1000 Min 1000 Mult
T3 = 300 Min 300 Mult
T5 = 500 Min 500 Mult
TF = Full Reel
TS = 100 Min 1 Mult
Historical Part Number Example: P0805H6801BBT
P 0805 H 6801 B B T
STYLE CASE SIZE TCR
CHARACTERISTIC
OHMIC VALUE TOLERANCE TERMINATION PACKAGING
06E1 02B021 BTSP-
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
