TIP41G, TIP41AG, TIP41BG, TIP41CG (NPN), TIP42G,TIP42AG, TIP42BG, TIP42CG(PNP) Complementary Silicon Plastic Power Transistors www.onsemi.com Designed for use in general purpose amplifier and switching applications. Features * Epoxy Meets UL 94 V-0 @ 0.125 in * These Devices are Pb-Free and are RoHS Compliant* 6 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 40-60-80-100 VOLTS, 65 WATTS MAXIMUM RATINGS Rating Collector-Emitter Voltage TIP41G, TIP42G TIP41AG, TIP42AG TIP41BG, TIP42BG TIP41CG, TIP42CG Symbol VCEO Value Unit Vdc 40 60 80 100 VCB Emitter-Base Voltage VEB 5.0 Vdc IC 6.0 Adc ICM 10 Adc Base Current IB 2.0 Adc Total Power Dissipation @ TC = 25C Derate above 25C PD 65 0.52 W W/C Total Power Dissipation @ TA = 25C Derate above 25C PD 2.0 0.016 W W/C Unclamped Inductive Load Energy (Note 1) E 62.5 mJ TJ, Tstg - 65 to +150 C ESD - Human Body Model HBM 3B V ESD - Machine Model MM C V Collector Current - Peak Operating and Storage Junction, Temperature Range *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. October, 2014 - Rev. 11 1 BASE Vdc 40 60 80 100 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. IC = 2.5 A, L = 20 mH, P.R.F. = 10 Hz, VCC = 10 V, RBE = 100 W. (c) Semiconductor Components Industries, LLC, 2014 NPN COLLECTOR 2,4 1 BASE Collector-Base Voltage TIP41G, TIP42G TIP41AG, TIP42AG TIP41BG, TIP42BG TIP41CG, TIP42CG Collector Current - Continuous PNP COLLECTOR 2,4 1 3 EMITTER 3 EMITTER 4 TO-220 CASE 221A STYLE 1 1 2 3 MARKING DIAGRAM TIP4xxG AYWW TIP4xx xx A Y WW G = Device Code = 1, 1A, 1B, 1C 2, 2A, 2B, 2C = Assembly Location = Year = Work Week = Pb-Free Package ORDERING INFORMATION See detailed ordering and shipping information on page 6 of this data sheet. Publication Order Number: TIP41A/D TIP41G, TIP41AG, TIP41BG, TIP41CG (NPN), TIP42G, TIP42AG, TIP42BG, TIP42CG (PNP) THERMAL CHARACTERISTICS Symbol Max Unit Thermal Resistance, Junction-to-Case Characteristic RqJC 1.67 C/W Thermal Resistance, Junction-to-Ambient RqJA 57 C/W Min Max Unit ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (Note 2) (IC = 30 mAdc, IB = 0) TIP41G, TIP42G TIP41AG, TIP42AG TIP41BG, TIP42BG TIP41CG, TIP42CG VCEO(sus) Collector Cutoff Current (VCE = 30 Vdc, IB = 0) TIP41G, TIP41AG, TIP42G, TIP42AG (VCE = 60 Vdc, IB = 0) TIP41BG, TIP41CG, TIP42BG, TIP42CG ICEO Collector Cutoff Current (VCE = 40 Vdc, VEB = 0) TIP41G, TIP42G (VCE = 60 Vdc, VEB = 0) TIP41AG, TIP42AG (VCE = 80 Vdc, VEB = 0) TIP41BG, TIP42BG (VCE = 100 Vdc, VEB = 0) TIP41CG, TIP42CG ICES Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) IEBO Vdc 40 60 80 100 - - - - mAdc - 0.7 - 0.7 mAdc - 400 - 400 - 400 - 400 - 1.0 30 15 - 75 - 1.5 - 2.0 3.0 - 20 - mAdc ON CHARACTERISTICS (Note 2) hFE DC Current Gain (IC = 0.3 Adc, VCE = 4.0 Vdc) (IC = 3.0 Adc, VCE = 4.0 Vdc) Collector-Emitter Saturation Voltage (IC = 6.0 Adc, IB = 600 mAdc) VCE(sat) Base-Emitter On Voltage (IC = 6.0 Adc, VCE = 4.0 Vdc) VBE(on) - Vdc Vdc DYNAMIC CHARACTERISTICS Current-Gain - Bandwidth Product (IC = 500 mAdc, VCE = 10 Vdc, ftest = 1.0 MHz) fT Small-Signal Current Gain (IC = 0.5 Adc, VCE = 10 Vdc, f = 1.0 kHz) hfe MHz - Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width 300 ms, Duty Cycle 2.0%. www.onsemi.com 2 TA 4.0 TC 80 3.0 60 2.0 40 1.0 20 0 0 TC TA 20 0 40 60 100 80 T, TEMPERATURE (C) 120 140 160 Figure 1. Power Derating VCC +30 V 25 ms RC SCOPE +11 V RB 0 -9.0 V D1 tr, tf 10 ns DUTY CYCLE = 1.0% -4 V RB and RC VARIED TO OBTAIN DESIRED CURRENT LEVELS D1 MUST BE FAST RECOVERY TYPE, e.g.: 1N5825 USED ABOVE IB 100 mA MSD6100 USED BELOW IB 100 mA Figure 2. Switching Time Test Circuit 2.0 TJ = 25C VCC = 30 V IC/IB = 10 1.0 0.7 0.5 t, TIME (s) PD, POWER DISSIPATION (WATTS) TIP41G, TIP41AG, TIP41BG, TIP41CG (NPN), TIP42G, TIP42AG, TIP42BG, TIP42CG (PNP) 0.3 0.2 tr 0.1 0.07 0.05 0.03 0.02 0.06 td @ VBE(off) 5.0 V 0.1 0.4 0.6 1.0 0.2 2.0 IC, COLLECTOR CURRENT (AMP) Figure 3. Turn-On Time www.onsemi.com 3 4.0 6.0 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) TIP41G, TIP41AG, TIP41BG, TIP41CG (NPN), TIP42G, TIP42AG, TIP42BG, TIP42CG (PNP) 1.0 0.7 0.5 D = 0.5 0.3 0.2 0.2 0.1 0.1 0.07 0.05 0.02 0.03 0.02 0.01 SINGLE PULSE 0.01 0.01 0.02 0.05 1.0 P(pk) ZqJC(t) = r(t) RqJC RqJC = 1.92C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) ZqJC(t) 0.05 0.2 1.0 0.5 2.0 5.0 t, TIME (ms) 10 20 t1 t2 DUTY CYCLE, D = t1/t2 50 100 200 500 1.0 k Figure 4. Thermal Response There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC - VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 5 is based on TJ(pk) = 150C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) 150C. TJ(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 10 IC, COLLECTOR CURRENT (AMP) 0.5ms 5.0 1.0ms 3.0 TJ = 150C 2.0 CURVES APPLY BELOW RATED VCEO 1.0 0.5 SECONDARY BREAKDOWN LTD BONDING WIRE LTD THERMAL LIMITATION @ TC = 25C (SINGLE PULSE) 0.3 0.2 0.1 5.0 5.0ms TIP41, TIP42 TIP41A, TIP42A TIP41B, TIP42B TIP41C, TIP42C 40 10 20 60 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 80 100 Figure 5. Active-Region Safe Operating Area 5.0 300 ts t, TIME (s) 1.0 TJ = 25C TJ = 25C VCC = 30 V IC/IB = 10 IB1 = IB2 200 C, CAPACITANCE (pF) 3.0 2.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.06 tf Cib 100 70 Cob 50 0.1 0.2 0.4 0.6 1.0 2.0 IC, COLLECTOR CURRENT (AMP) 4.0 30 0.5 6.0 Figure 6. Turn-Off Time 1.0 2.0 3.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance www.onsemi.com 4 30 50 TIP41G, TIP41AG, TIP41BG, TIP41CG (NPN), TIP42G, TIP42AG, TIP42BG, TIP42CG (PNP) hFE, DC CURRENT GAIN 300 200 VCE = 2.0 V TJ = 150C 100 70 50 25C 30 20 10 7.0 5.0 0.06 VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) 500 -55C 1.0 2.0 0.2 0.3 0.4 0.6 IC, COLLECTOR CURRENT (AMP) 0.1 4.0 2.0 TJ = 25C 1.6 1.2 IC = 1.0 A 0.4 0 6.0 10 V, TEMPERATURE COEFFICIENTS (mV/C) V, VOLTAGE (VOLTS) 1.6 1.2 VBE(sat) @ IC/IB = 10 0.8 VBE @ VCE = 4.0 V 0.4 VCE(sat) @ IC/IB = 10 0.2 0.3 0.4 0.6 1.0 2.0 3.0 4.0 6.0 IC, COLLECTOR CURRENT (A) 50 100 200 300 IB, BASE CURRENT (mA) 500 1000 *APPLIES FOR IC/IB hFE/4 +1.5 +1.0 +25C to +150C +0.5 *qVC FOR VCE(sat) 0 -55C to +25C -0.5 +25C to +150C -1.0 -1.5 qVB FOR VBE -55C to +25C -2.0 -2.5 0.06 0.1 0.2 0.3 0.5 1.0 2.0 3.0 4.0 IC, COLLECTOR CURRENT (AMP) Figure 10. "On" Voltages Figure 11. Temperature Coefficients VCE = 30 V TJ = 150C 100C 25C 100 IC = ICES 10-1 REVERSE 10-3 -0.3 -0.2 -0.1 +2.0 IC, COLLECTOR CURRENT (AMP) R BE , EXTERNAL BASE-EMITTER RESISTANCE (OHMS) 0.1 103 10-2 30 +2.5 TJ = 25C 101 20 Figure 9. Collector Saturation Region 2.0 102 5.0 A 0.8 Figure 8. DC Current Gain 0 0.06 2.5 A FORWARD 0 +0.1 +0.2 +0.3 +0.4 +0.5 +0.6 +0.7 6.0 10M VCE = 30 V 1.0M IC = 10 x ICES IC ICES 100k 10k IC = 2 x ICES 1.0k 0.1k (TYPICAL ICES VALUES OBTAINED FROM FIGURE 12) 20 40 60 80 100 120 140 160 VBE, BASE-EMITTER VOLTAGE (VOLTS) TJ, JUNCTION TEMPERATURE (C) Figure 12. Collector Cut-Off Region Figure 13. Effects of Base-Emitter Resistance www.onsemi.com 5 TIP41G, TIP41AG, TIP41BG, TIP41CG (NPN), TIP42G, TIP42AG, TIP42BG, TIP42CG (PNP) ORDERING INFORMATION Device Package Shipping TIP41G TO-220 (Pb-Free) 50 Units / Rail TIP41AG TO-220 (Pb-Free) 50 Units / Rail TIP41BG TO-220 (Pb-Free) 50 Units / Rail TIP41CG TO-220 (Pb-Free) 50 Units / Rail TIP42G TO-220 (Pb-Free) 50 Units / Rail TIP42AG TO-220 (Pb-Free) 50 Units / Rail TIP42BG TO-220 (Pb-Free) 50 Units / Rail TIP42CG TO-220 (Pb-Free) 50 Units / Rail www.onsemi.com 6 TIP41G, TIP41AG, TIP41BG, TIP41CG (NPN), TIP42G, TIP42AG, TIP42BG, TIP42CG (PNP) PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AH -T- B F SEATING PLANE C T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.415 0.160 0.190 0.025 0.038 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.024 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.53 4.07 4.83 0.64 0.96 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.61 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 BASE COLLECTOR EMITTER COLLECTOR ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative TIP41A/D