resistors CND bussed square corner resistor array EU features * * * * * * Size Figure Code No. dimensions and construction Figure 1 L a p b W t Electrode Resistive Film Inner Electrode Ceramic Substrate L C Dimensions inches (mm) t d a (top) a (bot.) 1J10VK 2 1J10K 2 .012.008 .126.006 .063.008 (0.30.2) (3.20.15) (1.60.2) .014.004 (0.350.1) 1J10Y .012 (0.3) .010.004 .020.004 .016.004 .012.008 (0.250.1) (0.50.1) (0.40.1) (0.30.2) b p -- .025 (0.64) -- .025 .014.004 .022.004 .013.006 .012.004 .008.004 (0.64) (0.350.1) (0.550.1) (0.330.15) (0.30.1) (0.20.1) .157.008 .083.008 .010.008 .016.008 .024.004 .020.008 .016.006 .006.004 .031 (4.00.2) (2.10.2) (0.250.2) (0.40.2) (0.60.1) (0.50.2) (0.40.15) (0.150.1) (0.8) 2A10Y Concave W .126.004 .063.004 .012.008 .012.004 .020.004 .016.004 (3.20.1) (1.60.1) (0.30.2) (0.30.1) (0.50.1) (0.40.1) 1 C d Protective Coating Manufactured to type RK73 standards Concave or convex terminations Less board space than individual chips Eight bussed resistor elements included in one array Marking: Marked with resistance value Products with lead-free terminations meet EU RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per Annex 1, exemption 5 of EU directive 2005/95/EC 2B10V .252.008 .122.008 .014.006 .022.006 .024.004 .024.004 .024.006 .006.004 0.05 (6.40.2) (3.10.2) (0.350.15) (0.550.15) (0.60.1) (0.60.1) (0.60.15) (0.150.1) (1.27) 3 2B10 Figure 2 a L Figure 3 p b W Electrode Resistive Film Ceramic Substrate Inner Electrode b t d Protective Coating p W C t L a d Protective Coating Convex Electrode Resistive Film C Concave Inner Electrode Ceramic Substrate ordering information New Part # New Part # CND 1J 10 Type Size Elements 1J 10 CND 2B 10 Type Size Elements 1J 2A 2B 10 For further information on packaging, please refer to Appendix A. V K T Circuit Symbol V: Reverse common electrode Nil: Standard Terminal Symbol Termination Material T: Sn (Other termination styles may be available, please contact factory for options) V T Circuit Symbol V: Reverse common electrode Y: Side electrode type Nil: Standard Termination Material T: Sn (Other termination styles may be available, please contact factory for options) TD Packaging TD: 7" paper tape TE Packaging TD: 7" paper tape TE: 7" embossed plastic 103 Nominal Resistance 2 significant figures + 1 multiplier 103 Nominal Resistance 2 significant figures + 1 multiplier Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 72 J Tolerance J: 5% J Tolerance J: 5% 12/28/08 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com bussed square corner resistor array circuit schematics and markings CND1J10K 9 8 7 10 R R R CND1J10Y, CND2A10Y 10 9 8 7 6 R R R R R R 1 R R 1 R 2 R 3 R R R R R R 6 10 9 CND2B10 8 7 R R R R R R 6 R CND1J10VK 9 8 7 10 R R R R R R R 6 6 R 4 CND2B10V 9 8 7 10 5 R 2 R 3 103 R 4 5 1 2 103 3 R 4 R 5 1 103 2 3 5 4 1 2 103 3 R 4 5 103 applications and ratings Part Designation Power Rating @ 70C (Per Element) CND1J10VK CND1J10K CND1J10Y CND2A10Y CND2B10V CND2B10 T.C.R. (ppm/C) Max. Resistance Range E-12 .031 Resistance Tolerance Absolute Maximum Working Voltage Maximum Overload Voltage (5 Secs. Max.) 25V 50V Operating Temperature Range 47 - 39k .05 22 - 39K 200 .063 -55C to +125C J: 5% 100 - 100K 50V 100V environmental applications Surface Temperature Rise Derating Curve 100 60 Temperature Rise (C) % Rated Power 80 60 40 20 0 CND2A10Y CND2B10 50 40 CND1J 30 20 10 0 20 40 60 80 100 120 140 70 125 Ambient Temperature (C) 160 0 0 1/32 1/16 1/10 1/8 (W) Power Performance Characteristics Parameter Resistance T.C.R. Overload (Short time) Resistance to Solder Heat Rapid Change of Temperature Moisture Resistance Endurance at 70C Low Temperature Operation High Temperature Exposure Requirement R Limit Typical Within specified -- tolerance Within specified -- T.C.R. 2.0% 0.5% 1.0% 0.25% 1.0% 0.25% 5.0% 1.0% 5.0% 1.0% 1.0% 0.2% 1.0% 0.2% Test Method 25C +25C/-55C, +25C/+125C Rated voltage x 2.5 for 5 seconds 260C 5C, 10 seconds 1 second -55C (30 minutes), +125C (30 minutes), 5 cycles 40C 2C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle -55C, 1 hour +125C, 100 hours Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/28/08 KOA Speer Electronics, Inc. * 199 Bolivar Drive * Bradford, PA 16701 * USA * 814-362-5536 * Fax: 814-362-8883 * www.koaspeer.com 73 resistors CND