2013-07-16 DURIS(R) E 5 Datasheet Draft Version 0.0 GW JDSLS1.EC The DURIS(R) E 5 combines high efficacy and a wide beam angle into a compact format (5.6 mm x 3.0 mm). This is key to homogeneous illumination applications where the DURIS(R) E 5 never fails to impress with its performance on system level. Die DURIS(R) E 5 kombiniert hohe Effizienz und einen weiten Abstrahlwinkel in einer kompakten Bauform (5.6 mm x 3.0 mm). Speziell fur Anwendungen mit besonders homogener Lichtverteilung kann die DURIS(R) E 5 mit ihrer Leistung auf Systemebene uberzeugen. Features: Besondere Merkmale: * Package: white SMT package, colored diffused silicone resin * Viewing angle at 50 % IV: 120 * Color: 2700 K - 6500 K ( white ) * CRI: min. 80 ( typ. 85 ) * Luminous Flux: typ. 43 lm @ 5000 K * Luminous efficacy: typ. 109 lm/W @ 5000 K * Gehausetyp: weies SMT Gehause, farbiger diffuser Silikon-Verguss * Abstrahlwinkel bei 50 % IV: 120 * Farbe: 2700 K - 6500 K ( wei ) * CRI: min. 80 ( typ. 85 ) * Lichtstrom: typ. 43 lm @ 5000 K * Lichtausbeute: typ. 109 lm/W @ 5000 K Applications Anwendungen * Retrofits and fixtures * Task lights 2013-07-16 * Retrofits * Schreibtischleuchten 1 Draft Version 0.0 GW JDSLS1.EC Ordering Information Bestellinformation Type: Color Temperature Luminous Intensity 1) page 24 Ordering Code Typ: Farbtemperatur Lichtstarke Bestellnummer 1) Seite 24 IF = 120 mA [K] IV [mcd] GW JDSLS1.EC-FRFT-5C8D-1 6500 13000 ... 16400 Q65111A4675 GW JDSLS1.EC-FRFT-5E8G-1 5700 13000 ... 16400 Q65111A4674 GW JDSLS1.EC-FRFT-5H7I-1 5000 13000 ... 16400 Q65111A4673 GW JDSLS1.EC-FRFT-5L7N-1 4000 13000 ... 16400 Q65111A4672 GW JDSLS1.EC-FRFT-5O8Q-1 3500 13000 ... 16400 Q65111A4671 GW JDSLS1.EC-FRFT-5R8T-1 3000 13000 ... 16400 Q65111A4670 GW JDSLS1.EC-FQFS-5U8X-1 2700 12100 ... 15000 Q65111A4820 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page ). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. GW JDSLS1.EC-FRFT-5H7I-1 means that only one group FR, FS, FT will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where color chromaticity coordinate groups are measured and binned, single groups will be shipped on any one packing unit. GW JDSLS1.EC-FRFT-5H7I-1 means that the device will be shipped within the specified limits. In order to ensure availability, single color chromaticity groups groups will not be orderable (see page ). In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. GW JDSLS1.EC-FRFT-5H7I-1 means that only one forward voltage group L1,L2,M1,M2,N1,N2,P1,P2 will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page ). Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite ). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. GW JDSLS1.EC-FRFT-5H7I-1 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen FR, FS, FT enhalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Farbortgruppe geliefert. Z.B. GW JDSLS1.EC-FRFT-5H7I-1 bedeutet, dass in einer Verpackungseinheit nur eine der Farbortgruppen enthalten ist (siehe Seite ). GW JDSLS1.EC-FRFT-5H7I-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Farbortgruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. GW JDSLS1.EC-FRFT-5H7I-1 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen L1,L2,M1,M2,N1,N2,P1,P2 enthalten (siehe Seite ). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. 2013-07-16 2 Draft Version 0.0 GW JDSLS1.EC Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 85 C Storage temperature range Lagertemperatur Tstg -40 ... 100 C Junction temperature Sperrschichttemperatur Tj 110 C Forward current Durchlassstrom (TS = 25 C) IF 150 mA Surge current Stostrom (t <= 10 s; D = 0.005; TS = 25 C) IFM 300 mA Reverse voltage Sperrspannung (TS = 25 C) VR not designed for reverse operation V ESD withstand voltage ESD Festigkeit (acc. to ANSI/ESDA/JEDEC JS-001 - HBM) VESD up to 5 kV 2013-07-16 3 Draft Version 0.0 GW JDSLS1.EC Characteristics (TS = 25 C; IF = 120 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2 120 Forward voltage 2) page 24 Durchlassspannung 2) Seite 24 (min.) (typ.) (max.) VF VF VF 2.80 3.30 3.60 V V V IR not designed for reverse operation Reverse current Sperrstrom Color reproduction index 3) page 24 Farbwiedergabe Index 3) Seite 24 (typ.) (min.) Ra Ra 85 80 - Real thermal resistance junction / solder point (typ.) (max.) Rth JS real Rth JS real 52 80 K/W K/W (typ.) (max.) Rth JS el Rth JS el 37 57 K/W K/W 4) page 24 Realer Warmewiderstand Sperrschicht / Lotpad 4) Seite 24 "Electrical" thermal resistance junction / solder point 4) page 24 "Elektrischer" Warmewiderstand Sperrschicht / Lotpad 4) Seite 24 (with efficiency e = 34 %) Note: Individual forward voltage groups see next page Anm.: Durchlassspannungsgruppen siehe nachste Seite 2013-07-16 4 Draft Version 0.0 GW JDSLS1.EC Brightness Groups Helligkeitsgruppen Group Luminous Intensity 1) page 24 Luminous Intensity 1) page 24 Luminous Flux Luminous Flux Gruppe Lichtstarke Lichtstarke Lichtstrom Lichtstrom (min.) Iv [mcd] (max.) Iv [mcd] (extrapolated min.) V [mlm] (extrapolated max.) V [mlm] FQ 12100 13000 35600 38200 FR 13000 14000 38200 41200 FS 14000 15000 41200 44100 FT 15000 16400 44100 48200 FU 16400 18000 48200 52900 Note: 1) Seite 24 1) Seite 24 The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered. The extrapolated typical minimum and maximum values are calculated with a typical V/IV factor of 2.94. It is to consider that the 3 range of the V/IV factor is 2.8 - 3.1. Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen besteht. Einzelne Helligkeitsgruppen sind nicht bestellbar. Der extrapolierte typische Minimum- und Maximumlichtstrom sind mit einem V/IV-Faktor von 2,94 berechnet. Mit der 3-Abweichung ergibt sich ein V/IV-Faktor von 2,8 bis 3,1. Forward Voltage Groups 2) page 24 Durchlassspannungsgruppen 2) Seite 24 Group Gruppe (min.) VF [V] (max.) VF [V] L1 2.80 2.90 L2 2.90 3.00 M1 3.00 3.10 M2 3.10 3.20 N1 3.20 3.30 N2 3.30 3.40 P1 3.40 3.50 P2 3.50 3.60 2013-07-16 5 Draft Version 0.0 GW JDSLS1.EC Chromaticity Coordinate Groups 5) page 24 Farbortgruppen 5) Seite 24 Cy 0.900 520 515 525 0.800 530 540 510 0.700 550 505 560 0.600 570 500 0.500 580 590 495 0.400 600 0.300 610 620 630 700 490 0.200 485 480 0.100 475 470 450 460 0.000 0.000 0.100 0.200 0.300 0.400 0.500 0.600 0.700 0.800 Cx Coordinates in reference to CIE 1931 (cx cy) Cy 0.440 4000 K 2700KK 2700 3000KK 3000 3500 K 0.420 8T 8S 8R 8Q 0.400 7Q 8O 7P 7N 0.380 7J 7I 5500 K 0.360 6000 K 0.340 6500 K 7E 7000 K 7D 7C 0.320 7F 6G 6F 5G 6E 6H 5H 5L 5K 6I 5J 5I 5P 5N 5M 6K 5R 5Q 5S 5T 8X 8V 8W 7W 7X 7U 7V 6W 6X 6U 6V 5W 5X 5U 5V 2700 K 0K 300 5O 0K 350 K 00 40 warm white K 00 45 K 00 50 5F 6D 6C 7H 7G 6L 6J 6P 6O 6M 7K 5000 K 6N 7L 6T 6S 6R 6Q 7O 7M 4500 K 7S 7R 8P neutral white 7T 8U 5E 5D K 00 57 5C K 00 65 cool white 0.300 0.300 0.320 0.340 0.360 0.380 0.400 0.420 Coordinates in reference to CIE 1931 (cx cy) 2013-07-16 0.440 0.460 0.480 0.500 Cx 6 Draft Version 0.0 GW JDSLS1.EC Color Chromaticity Groups 5) page 24 Farbortgruppen 5) Seite 24 Group Gruppe 5C 6C 7C 8C 5D 6D 7D 2013-07-16 Cx Cy 0.3055 0.3177 0.3068 Group Gruppe Cx Cy Cx Cy 0.3456 0.3601 0.4261 0.4077 0.3113 0.3464 0.3688 0.4299 0.4165 0.3108 0.3229 0.3539 0.3669 0.4346 0.4108 0.3119 0.3162 0.3551 0.3760 0.4387 0.4197 0.3041 0.3240 0.3670 0.3578 0.4222 0.3840 0.3055 0.3177 0.3692 0.3677 0.4263 0.3929 0.3098 0.3296 0.3746 0.3624 0.4298 0.3867 0.3108 0.3229 0.3773 0.3726 0.4342 0.3957 0.3028 0.3304 0.3692 0.3677 0.4263 0.3929 0.3041 0.3240 0.3714 0.3775 0.4305 0.4019 0.3087 0.3363 0.3773 0.3726 0.4342 0.3957 0.3098 0.3296 0.3799 0.3828 0.4386 0.4048 0.3015 0.3368 0.3714 0.3775 0.4305 0.4019 0.3028 0.3304 0.3736 0.3874 0.4346 0.4108 0.3076 0.3430 0.3799 0.3828 0.4386 0.4048 0.3087 0.3363 0.3826 0.3931 0.4430 0.4138 0.3108 0.3229 0.3746 0.3624 0.4346 0.4108 0.3119 0.3162 0.3773 0.3726 0.4387 0.4197 0.3162 0.3282 0.3822 0.3670 0.4430 0.4138 0.3170 0.3212 0.3853 0.3776 0.4474 0.4228 0.3098 0.3296 0.3773 0.3726 0.4298 0.3867 0.3108 0.3229 0.3799 0.3828 0.4342 0.3957 0.3154 0.3352 0.3853 0.3776 0.4373 0.3893 0.3162 0.3282 0.3885 0.3882 0.4420 0.3985 0.3087 0.3363 0.3799 0.3828 0.4342 0.3957 0.3098 0.3296 0.3826 0.3931 0.4386 0.4048 0.3146 0.3422 0.3885 0.3882 0.4420 0.3985 0.3154 0.3352 0.3916 0.3987 0.4468 0.4077 7I 5L 6L 7L 5M 6M 7M 7 Group Gruppe 8R 5S 6S 7S 8S 5T 6T Draft Version 0.0 Group Gruppe 8D 5E 6E 7E 8E 5F 6F 7F 2013-07-16 GW JDSLS1.EC Cx Cy 0.3076 0.3430 0.3087 Group Gruppe Cx Cy Cx Cy 0.3822 0.3670 0.4386 0.4048 0.3363 0.3853 0.3776 0.4430 0.4138 0.3138 0.3492 0.3898 0.3716 0.4468 0.4077 0.3146 0.3422 0.3934 0.3825 0.4515 0.4168 0.3162 0.3282 0.3853 0.3776 0.4430 0.4138 0.3170 0.3212 0.3885 0.3882 0.4474 0.4228 0.3216 0.3334 0.3934 0.3825 0.4515 0.4168 0.3221 0.3262 0.3970 0.3935 0.4562 0.4260 0.3154 0.3352 0.3885 0.3882 0.4373 0.3893 0.3162 0.3282 0.3916 0.3987 0.4420 0.3985 0.3210 0.3408 0.3970 0.3935 0.4428 0.3906 0.3216 0.3334 0.4006 0.4044 0.4477 0.3998 0.3146 0.3422 0.3890 0.3690 0.4420 0.3985 0.3154 0.3352 0.3916 0.3772 0.4468 0.4077 0.3205 0.3481 0.3975 0.3731 0.4477 0.3998 0.3210 0.3408 0.4006 0.3815 0.4526 0.4090 0.3138 0.3492 0.3916 0.3772 0.4468 0.4077 0.3146 0.3422 0.3943 0.3853 0.4515 0.4168 0.3200 0.3554 0.4006 0.3815 0.4526 0.4090 0.3205 0.3481 0.4036 0.3898 0.4576 0.4183 0.3217 0.3316 0.3943 0.3853 0.4515 0.4168 0.3222 0.3243 0.3970 0.3934 0.4562 0.4260 0.3293 0.3384 0.4036 0.3898 0.4576 0.4183 0.3294 0.3306 0.4067 0.3982 0.4625 0.4275 0.3212 0.3389 0.3970 0.3934 0.4428 0.3906 0.3217 0.3316 0.3997 0.4015 0.4477 0.3998 0.3292 0.3461 0.4067 0.3982 0.4483 0.3919 0.3293 0.3384 0.4097 0.4065 0.4534 0.4011 0.3206 0.3462 0.3975 0.3731 0.4477 0.3998 0.3212 0.3389 0.4006 0.3815 0.4526 0.4090 0.3292 0.3461 0.4061 0.3773 0.4534 0.4011 0.3292 0.3539 0.4095 0.3858 0.4585 0.4104 5N 6N 7N 5O 6O 7O 8O 5P 8 Group Gruppe 7T 8T 5U 6U 7U 8U 5V 6V Draft Version 0.0 Group Gruppe 8F 5G 6G 7G 8G 5H 6H 7H 2013-07-16 GW JDSLS1.EC Cx Cy 0.3201 0.3534 0.3206 Group Gruppe Cx Cy Cx Cy 0.4006 0.3815 0.4526 0.4090 0.3462 0.4036 0.3898 0.4576 0.4183 0.3291 0.3617 0.4095 0.3858 0.4585 0.4104 0.3292 0.3539 0.4130 0.3944 0.4636 0.4197 0.3293 0.3384 0.4036 0.3898 0.4576 0.4183 0.3294 0.3306 0.4067 0.3982 0.4625 0.4275 0.3366 0.3369 0.4130 0.3944 0.4636 0.4197 0.3369 0.3451 0.4164 0.4029 0.4688 0.4290 0.3292 0.3461 0.4067 0.3982 0.4483 0.3919 0.3293 0.3384 0.4097 0.4065 0.4534 0.4011 0.3369 0.3451 0.4164 0.4029 0.4538 0.3931 0.3373 0.3534 0.4198 0.4115 0.4591 0.4025 0.3292 0.3461 0.4061 0.3773 0.4534 0.4011 0.3292 0.3539 0.4095 0.3858 0.4585 0.4104 0.3373 0.3534 0.4147 0.3814 0.4591 0.4025 0.3376 0.3616 0.4185 0.3902 0.4644 0.4118 0.3291 0.3617 0.4095 0.3858 0.4585 0.4104 0.3292 0.3539 0.4130 0.3944 0.4636 0.4197 0.3376 0.3616 0.4185 0.3902 0.4644 0.4118 0.3379 0.3698 0.4223 0.3990 0.4697 0.4211 0.3366 0.3369 0.4130 0.3944 0.4636 0.4197 0.3369 0.3451 0.4164 0.4029 0.4688 0.4290 0.3441 0.3428 0.4223 0.3990 0.4697 0.4211 0.3448 0.3515 0.4261 0.4077 0.4750 0.4304 0.3369 0.3451 0.4164 0.4029 0.4538 0.3931 0.3373 0.3534 0.4198 0.4115 0.4591 0.4025 0.3448 0.3515 0.4261 0.4077 0.4593 0.3944 0.3456 0.3601 0.4299 0.4165 0.4648 0.4038 0.3373 0.3534 0.4147 0.3814 0.4591 0.4025 0.3376 0.3616 0.4185 0.3902 0.4644 0.4118 0.3456 0.3601 0.4222 0.3840 0.4648 0.4038 0.3464 0.3688 0.4263 0.3929 0.4703 0.4132 6P 7P 8P 5Q 6Q 7Q 8Q 5R 9 Group Gruppe 7V 8V 5W 6W 7W 8W 5X 6X Draft Version 0.0 Group Gruppe 5I 6I GW JDSLS1.EC Cx Cy 0.3441 0.3428 0.3448 Group Gruppe Cx Cy Cx Cy 0.4185 0.3902 0.4644 0.4118 0.3515 0.4223 0.3990 0.4697 0.4211 0.3515 0.3487 0.4263 0.3929 0.4703 0.4132 0.3527 0.3578 0.4305 0.4019 0.4758 0.4225 0.3448 0.3515 0.4223 0.3990 0.4697 0.4211 0.3456 0.3601 0.4261 0.4077 0.4750 0.4304 0.3527 0.3578 0.4305 0.4019 0.4758 0.4225 0.3539 0.3669 0.4346 0.4108 0.4813 0.4319 6R 7R Group Gruppe 7X 8X Group Name on Label Gruppenbezeichnung auf Etikett Example: FR-5H-L1 Beispiel: FR-5H-L1 Brightness Helligkeit Chromaticity Coordinate Farbort Forward Voltage Durchlassspannung FR 5H L1 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. 2013-07-16 10 Draft Version 0.0 GW JDSLS1.EC Relative Spectral Emission - V() = Standard eye response curve 6) page 24 Relative spektrale Emission - V() = spektrale Augenempfindlichkeit 6) Seite 24 Irel = f (); TS = 25 C; IF = 120 mA Irel GW JDSLS1.EC-MS 1,0 : V : warm white : cool white 0,8 0,6 0,4 0,2 0,0 350 400 450 500 550 600 650 700 750 800 [nm] Radiation Characteristics 6) page 24 Abstrahlcharakteristik 6) Seite 24 Irel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2013-07-16 0.8 0.6 0.4 0 20 11 40 60 80 100 120 Draft Version 0.0 GW JDSLS1.EC Forward Current 6) page 24 Durchlassstrom 6) Seite 24 Relative Luminous Intensity 6) page 24 Relative Lichtstarke 6) Seite 24 IF = f (VF); TS = 25 C IV/IV(120 mA) = f(IF); TS = 25 C GW JDSLS1.EC GW JDSLS1.EC IV IF [mA] IV(120mA) 140 1,2 120 1,0 100 0,8 80 0,6 60 0,4 40 0,2 20 0,0 5 2,6 2,8 3,0 3,2 3,4 3,6 3,8 20 40 60 80 0 10 0 12 0 14 IF [mA] VF [V] Chromaticity Coordinate Shift 6) page 24 Farbortverschiebung 6) Seite 24 Chromaticity Coordinate Shift 6) page 24 Farbortverschiebung 6) Seite 24 warm white / warmwei cool white / kaltwei Cx, Cy = f(IF); TS = 25 C Cx, Cy = f(IF); TS = 25 C GW JDSLS1.EC GW JDSLS1.EC-6500K Cx Cy Cx Cy : Cx : Cy 0,44 : Cx : Cy 0,350 0,345 0,43 0,340 0,42 0,335 0,41 0,330 0,40 20 40 60 80 0 10 0 12 0 14 0 IF [mA] 2013-07-16 20 40 60 80 10 0 12 0 0 14 IF [mA] 12 Draft Version 0.0 GW JDSLS1.EC Relative Forward Voltage 6) page 24 Relative Vorwartsspannung 6) Seite 24 Relative Luminous Intensity 6) page 24 Relative Lichtstarke 6) Seite 24 VF = VF - VF(25C) = f(Tj); IF = 120 mA VF [V] IV/IV(25)C = f(Tj); IF = 120 mA GW JDSLS1.EC 0,20 Iv GW JDSLS1.EC 1,2 Iv(25C) 0,15 1,0 0,10 0,8 0,05 0,6 0,00 0,4 -0,05 0,2 -0,10 -0,15 -40 -20 0 20 40 60 80 0,0 -40 100 120 -20 0 20 40 60 80 Tj [C] Chromaticity Coordinate Shift 6) page 24 Farbortverschiebung 6) Seite 24 Chromaticity Coordinate Shift 6) page 24 Farbortverschiebung 6) Seite 24 warm white / warmwei cool white / kaltwei Cx, Cy = f(Tj); IF = 120 mA Cx, Cy = f(Tj); IF = 120 mA GW JDSLS1.EC Cx Cy Cx Cy : Cx : Cy 0,44 100 120 Tj [C] GW JDSLS1.EC-6500K 0,350 : Cx : Cy 0,345 0,43 0,340 0,335 0,42 0,330 0,41 0,325 0,320 0,40 0,315 0,39 -40 -20 0 20 40 60 80 100 120 -40 Tj [C] 2013-07-16 -20 0 20 40 60 80 100 120 Tj [C] 13 Draft Version 0.0 GW JDSLS1.EC Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF = f (T) IF [mA] GW JDSLS1.EC 160 150 140 130 120 110 100 90 80 70 60 50 40 30 Do not use below 10 mA 20 10 0 0 20 40 60 80 100 TS [C] 2013-07-16 14 Draft Version 0.0 GW JDSLS1.EC Package Outline 7) page 24 Mazeichnung 7) Seite 24 Approximate Weight: 35 mg Gewicht: 35 mg Function: P2 and thermal pad: Anode; P3: Cathode; P1&P4 not connected Funktion: P2 and Warmeleitpad: Anode; P3: Kathode; P1&P4 nicht verbunden 2013-07-16 15 Draft Version 0.0 GW JDSLS1.EC Recommended Solder Pad 7) page 24 Empfohlenes Lotpaddesign 7) Seite 24 Reflow soldering Reflow-Loten Note: Package not suitable for ultra sonic cleaning. For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Anm.: Das Gehause ist fur Ultraschallreinigung nicht geeignet. Um eine verbesserte Lotstellenkontaktierung zu erreichen, empfehlen wir, unter StandardStickstoffatmosphare zu loten. 2013-07-16 16 Draft Version 0.0 GW JDSLS1.EC Reflow Soldering Profile Reflow-Lotprofil Preconditioning: JEDEC Level 3 acc. to JEDEC J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 s 300 250 t OHA04612 Profile Feature Profil-Charakteristik Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum ) Ramp-up rate to preheat* 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2013-07-16 C 17 s Draft Version 0.0 GW JDSLS1.EC Method of Taping 7) page 24 Gurtung 7) Seite 24 2013-07-16 18 Draft Version 0.0 GW JDSLS1.EC Tape and Reel Gurtverpackung 12 mm tape with 2000 pcs. on 180 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm (inch) Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 +0.3/-0.1 4 0.1 (0.157 0.004) 4 0.1 (0.157 0.004) or 8 0.1 (0.315 0.004) 2 0.05 (0.079 0.002) 1.5 0.1 (0.059 + 0.004) 1.75 0.1 (0.069 0.004) 5.5 0.05 (0.217 0.002) Reel dimensions in mm (inch) Reel dimensions in mm (inch) A W Nmin W1 W2max 180 (7) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 2013-07-16 19 Draft Version 0.0 GW JDSLS1.EC Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE LE nk, el see . lab e H) (R bla cod If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs d nta ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co ce is UR 24 6 da e y MI 40 be tim C h e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC l wit or fac MO Flo tim s TO at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: un wh ve l Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > , Mo se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo r-p RH g, bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo TIO Barcode label N U C A M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2013-07-16 20 Draft Version 0.0 GW JDSLS1.EC Transportation Packing and Materials Kartonverpackung und Materialien Barcode label MY DE 18 R -1 +Q -1 P P: OU GR ) 44 01 C: D/ D) (9 00 20 34 : TY : (Q )Q H O 12 S S em R ic AM on du O ct pto or H NO s TC BA 3G P) (6 NO T LO T) (1 NO OD PR ) (X DE M Y R 18 GR OU P: P -1 +Q -1 E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: (X ) PR OD O NO : (1 T) 11 00 LO T 14 2 5 (Q )Q TY : SR AM 21 00 (9 D) 20 00 D/ C: 99 8 01 44 M u L lt S iT Y O T67 P L 6 5 14 2 110 0 (G ) Muster du O ct pto or s 21 NO : O S R ic AM on em BA TC H 3G H 12 34 NO : 12 S 8 2199 2100 : 12 _ (6 P) : el LE see . lab e H) nk, (R bla cod If y bar . dit RH mi % hu e /60 ive d C re ag lat ra ck re 30 < inf pa % k s of to 90 ea ur s d ). < ns (p or ur s d Ho de , cteg itio ur s Ho an bje co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da e y 40 be oc tim C e th < tor ll pr tim or ). 23 tim e at t wi ntC l wi or fac MO Flo tim s TO at or e. ca at Flo tha ale el or ur nth OP nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, l oc ve vic is be or de 24 tin en l 5a6 pr ve Le de e te co , w, g: ve l un wh e Le ke r se da ur e ba ed flo Le ve mo % ba e ba al d ur e Le ist en re e 10 e tim ur e se for ist ale op se for > , Mo se ist ur is or . , is ha 33 se Mo nk be ist nk rd g -0 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi va p. elf Ye ar ks s _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W Ho un Af flody qu Indno ire DE 1. e 4 8 re ed re y is qu JE 2. bo e Mo or tim 16 re C/ : e es dit2b a) St tim or mi is IP e ed or tim vic b) or g Hu Flo en tim or De 2a kin ce te Flo a) op or 3. b) ba en Flo da e fer l 1 2 Flo If al re tim ve l 4. se d l 2a3 ve Le g an ve l e Le Ba te ur e Le ve ur e Le ist Da ur e ist Mo ist ur Mo ist Mo Mo (G M ul LS ti Y TO T6 P 76 LE Muster L VE N s IVE RS ainIT TO ntNSUC TIO U g coSEND CO Ais baRE TU MI CThIS SE D Bi Bin1 Bi n2 : Pn3 : Q- 1ML : 1- 20 20 2 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label Dimensions of transportation box in mm (inch): Width / Breite Length / Lange Height / Hohe 195 5 (7.677 0.1968) 195 5 (7.677 0.1968) 30 5 (1.181 0.196) 2013-07-16 21 OHA02044 Draft Version 0.0 GW JDSLS1.EC Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Exempt group (Expositionsdauer 10000 s). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporar eingeschranktes Sehvermogen oder auch Nachbilder zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. Subcomponents of this LED are silverplated. Silver is discoloring when being exposed to environments containing high concentrations of aggressive substances. Corroded silver may lead to a worsening of the optical performance of the LED and can in the worst case lead to a failure of the LED. Do not expose this LED to aggressive atmospheres. Note, that corrosive gases may as well be emitted from materials close to the LED in the final product. Einzelkomponenten dieser LED sind silberbeschichtet. Silberoberflachen werden durch korrosive Substanzen verandert. Korrodiertes Silber kann zu einer Verschlechterung der optischen Eigenschaften und im schlimmsten Fall zum Ausfall der LED fuhren. Diese LED darf aggressiven Bedingungen nicht ausgesetzt werden. Es ist zu beachten, dass korrosive Gase auch von Materialien emittiert werden konnen, die sich im Endprodukt in unmittelbarer Umgebung der LED befinden. Change management for this component is aligned with the requirements of the lighting market. Das Anderungsmanagement dieses Bauteils ist an den Anforderungen des Lichtmarktes ausgerichtet. 2013-07-16 22 Draft Version 0.0 GW JDSLS1.EC Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2013-07-16 23 Draft Version 0.0 GW JDSLS1.EC Glossary Glossar 1) Brightness: Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 1) Helligkeit: Helligkeitswerte werden mit Stromeinpragedauer von 25 ms und Genauigkeit von 11% ermittelt. 2) Forward Voltage: Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. 2) Durchlassspannung: Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 3) Color reproduction index: Color reproduction index values (CRI-RA) are measured during a current pulse of typically 25 ms and with a tolerance of 3. 3) Farbwiedergabe Index: Werte des Farbwiedergabe Index (CRI-RA) werden wahrend eines Strompulses einer typischen Dauer von 25 ms und mit einer Genauigkeit 3 gemessen. 4) Thermal Resistance: Rth max is based on statistic values (6). 4) Warmewiderstand: Rth statistischen Werten (6). 5) Chromaticity coordinate groups: Chromaticity coordinate groups are tested at a current pulse duration of 25 ms and a tolerance of 0.01. 5) Farbortgruppen: Farbortgruppen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 0,01 ermittelt. 6) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 6) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 7) Tolerance of Measure: Dimensions are specified as follows: mm (inch). 7) Matoleranz: Mae angegeben: mm (inch). Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2013-07-16 24 max werden basiert wie einer einer auf folgt