FR1AA thru FR1MA
SURFACE MOUNT
FAST RECOVERY RECTIFIER
REVERSE VOLTAGE – 50 to 100
0 Volts
FORWARD CURRENT – 1.0 Ampere
FEATURES
•
Very low profile package – 0.9mm
•
Glass passivated chip
•
For surface mounted applications
•
Low reverse leakage current
•
Low forward voltage drop
•
High current capability
•
Fast switching for high efficiency
MECHANICAL DATA
•
Case: JEDEC DO-221AC
•
Case Material: “Green” molding compound, UL
flammability classification 94V-0, (No Br. Sb. Cl.)
•
Moisture Sensitivity: Level 1 per J-STD-020C
•
Terminals: Lead Free Plating (Matte Tin Finish.)
•
Reliability tested in accordance with AEC-Q101
•
Component in accordance to RoHs 2002/95/EC
SMA FLAT
SMA FLAT
DIM.
MIN. MAX.
A 0.90
1.10
B 1.25
1.65
C 0.15
0.40
D 2.25
2.95
E 4.80
5.60
E1 3.95
4.60
L 0.75
1.50
All dimension in millimeter
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
°C
ambient temperature unless otherwise specified.
PARAMETER SYMBOL
FR1AA
FR1BA
FR1DA
FR1GA
FR1JA
FR1KA
FR1MA
UNIT
Device marking code Note
FR1AA
FR1BA
FR1DA
FR1GA
FR1JA
FR1KA
FR1MA
---
Maximum Repetitive Peak Reverse Voltage V
RRM
50 100 200 400 600 800 1000 V
Maximum RMS Voltage V
RMS
35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage V
DC
50 100 200 400 600 800 1000 V
Average Rectified Output Current
@T
L
=125°C I
(AV)
1.0 A
Peak Forward Surge Current 8.3ms single half
sine-wave I
FSM
30 A
Operating junction temperature range T
J
-55 to +150 °C
Storage temperature range T
STG
-55 to +150 °C
PARAMETER TEST CONDITIONS
SYMBOL
Max. UNIT
Forward Voltage (1)
IF=1.0A
Tj=25°C V
F
1.3 V
Leakage Current (1)
VR=V
DC
Tj=25°C
Tj=125°C I
R
5
200 uA
Maximum Reverse Recovery Time (Note 2) T
RR
150 250 500 ns
THERMAL CHARACTERISTIC SYMBOL
Typical UNIT
Typical junction capacitance (3) C
J
15 pF
Typical thermal resistance _ Junction to Case (4) R
Θ
JC
26 °C/W
Typical thermal resistance _ Junction to Ambient (4)
R
Θ
JA
85 °C/W
Typical thermal resistance _ Junction to Lead (4) R
Θ
JL
18 °C/W
Note : REV. 3, Sep-2012, KSEP01
(1) 300us Pulse width, 2% Duty cycle.
(2) Reverse Recovery Test Conditions:I
F
=0.5A,I
R
=1.0A,I
RR
=0.25A.
(3) Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
(4) Thermal Resistance test performed in accordance with JESD-51. Unit mounted on 0.75t glass-epoxy substrate with foot print
copper
pad. R
Θ
JL
is measured at the lead
of cathode band,
R
Θ
JC
is measured at the top centre of body.
RATING AND CHARACTERISTIC CURVES
FR1AA~FR1MA
FIG.1- FORWARD CURRENT DERATING CURVE
0
0.2
0.4
0.6
0.8
1
1.2
0 25 50 75 100 125 150
LEAD TEMAERATURE, (℃)
AVERAGE FORWARD CURRENT, (A)
FIG.2- MAXIMUM NON-REPETITIV E SURGE
CURRENT
0
5
10
15
20
25
30
35
1 10 100
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT,
(A)
FIG.3- TYPICAL FORWORD CHARACTERISTICS
0.01
0.1
1
10
100
0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS FORWA RD
CURRENT, (A)
FIG.4- TYPICAL JUNCTION CAPACITANCE
1
10
1 10 100
REVERSE VOLTAGE, (V)
CAPACITANCE, (pF)
FIG.5- TYPICAL REVERSE CHARACTERISTICS
0.00001
0.0001
0.001
0.01
0.1
10 30 50 70 90 110 130
PERCENT OF RAT ED PEAK REVERSE VOLTAGE, (V)
INSTANTANEOUS REVERSE CURRENT, (uA)
Tj=25°C
Tj=25°C
Tj=75°C
8.3ms Single Half-Wave
RESISTIVE OR
INDUCTIVE LOAD
Tj=25°C, f=1MHz
Mounted on glass-epoxy
substrate with 1oz/ft
2
_foot print
copper pad.
Tj=125°C
Tj=50°C
Tj=100°C
Tj=125°C
Legal Disclaimer Notice
FR1AA~FR1MA
Important Notice and Disclaimer
LSC reserves the right to make changes to this document and its products and specifications
at any time without notice. Customers should obtain and confirm the latest product
information and specifications before final design, purchase or use.
LSC makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does LSC assume any liability for application assistance or
customer product design. LSC does not warrant or accept any liability with products which
are purchased or used for any unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property rights of
LSC.
LSC products are not authorized for use as critical components in life support devices or
systems without express written approval of LSC.
