MCP Indoor Call Point Range MCP1 - Resistor & Clean Contact Model (Red Versions) PRODUCT DATASHEET Product Benefits * Unique 'Plug & Play' installation concept * Total 'Flex-Ability' in the choice of operating element * Anti-Tamper facility * Enhanced aesthetics * Fully approved to the latest standards * Backward compatibility Product Approvals 166b/39 & 166b/40 Pending Product Overview Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost, are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique 'plug and play' concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple, but effective with no re-termination required and no time wasted. Through new standards and legislation, both break glass and re-settable operating elements can now be used within a manual call point. To provide you with the greatest 'flex-ability', the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered. All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard. The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options. These options are easily utilised by simply connecting the terminal block to the required connection in the back of the MCP1 product. A variety of resistor versions are available, with both 470 and 680 offered as standard. However, other resistor types can be provided upon request. The MCP1B product version allows for connection to 'Savwire' systems. Electrical Specification Connection Details: Max: Cable Termination: Figure .1 See Figure .1 30VDC 0.5-2.5mm2 MUS1A-R MCP1B-X Environmental Specification 0-95% non-condensing -400C to +550C -400C to +550C IP24D Mechanical Specification Material: Weight: Colour: PC/ABS 110g Flush/160g Surface Red, Ral 3001 Ordering Information Model Electrical Configuration Markings Stock MUS1A-R470FG-01 MUS1A-R470FF-01 MUS1A-R680FG-01 MUS1A-R470SG-01 MUS1A-R470SF-01 MUS1A-R680SG-01 MUS1B-R470SG01 Operating Mounting Element 470Ohm 470Ohm 680Ohm 470Ohm 470Ohm 680Ohm 470Ohm Resistor Resistor Resistor Resistor Resistor Resistor Resistor & & & & & & & N\O N\O N\O N\O N\O N\O N\O 24VDC 24VDC 24VDC 24VDC 24VDC 24VDC 24VDC (Savwire) Glass Flexible Glass Glass Flexible Glass Glass Flush Flush Flush Surface Surface Surface Surface EN54-11 EN54-11 EN54-11 EN54-11 EN54-11 EN54-11 EN54-11 Non-Stock MCP1A-R680FF-01 MCP1B-R470FG-01 MCP1B-R470FF-01 MCP1A-R680SF-01 MCP1B-R470FG-01 MCP1B-R470FF-01 680Ohm 470Ohm 470Ohm 680Ohm 470Ohm 470Ohm Resistor Resistor Resistor Resistor Resistor Resistor & & & & & & N\O N\O N\O N\O N\O N\O 24VDC 24VDC 24VDC 24VDC 24VDC 24VDC Flexible (Savwire) Glass (Savwire) Flexible Flexible (Savwire) Glass (Savwire) Flexible Flush Flush Flush Surface Surface Surface EN54-11 EN54-11 EN54-11 EN54-11 EN54-11 EN54-11 N\O = Normally Open Contact Accessories Code SC070 KG1 x 5 PS210 PS200 SC071 Description Pack Of Ten Test Keys Pack Of five Glass Elements Flexible Operating Element Plain Hinged Cover Pack Of Ten Terminal Blocks KAC Alarm Company Limited, 15-19 Trescott Road, Smallwood, Redditch, England B98 7AH. T: +44 (0) 1527 406655, F: +44 (0) 1527 406677, E: sales@kac.co.uk W: www.kac.co.uk PRODUCT DATASHEET Humidity: Operating Temperature: Storage Temperature: Ingress Protection (IP) Rating: Document Ref. LIT:MCP1 Rev. No. 01 E. & O.E.