SCES219N - APRIL 1999 - REVISED JUNE 2005 D Available in the Texas Instruments D D D D D D Ioff Supports Partial-Power-Down Mode NanoStar and NanoFree Packages Supports 5-V VCC Operation Inputs Accept Voltages to 5.5 V Max tpd of 3.6 ns at 3.3 V Low Power Consumption, 10-A Max ICC 24-mA Output Drive at 3.3 V DBV PACKAGE (TOP VIEW) A 1 5 2 GND 3 VCC A GND 4 D D DCK PACKAGE (TOP VIEW) B B Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) 1 5 DRL PACKAGE (TOP VIEW) VCC 2 3 4 A 1 B 2 GND 3 5 4 VCC Y YEA, YEP, YZA, OR YZP PACKAGE (BOTTOM VIEW) GND 3 4 B 2 A 1 5 Y VCC Y Y See mechanical drawings for dimensions. description/ordering information This single 2-input positive-OR gate is designed for 1.65-V to 5.5-V VCC operation. The SN74LVC1G32 performs the Boolean function Y + A ) B or Y + A * B in positive logic. NanoStar and NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. NanoStar and NanoFree are trademarks of Texas Instruments. Copyright 2005, Texas Instruments Incorporated !" #!$% &"' &! #" #" (" " ") !" && *+' &! #", &" ""%+ %!&" ", %% #""' POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SCES219N - APRIL 1999 - REVISED JUNE 2005 ORDERING INFORMATION ORDERABLE PART NUMBER PACKAGE TA NanoStar - WCSP (DSBGA) 0.17-mm Small Bump - YEA SN74LVC1G32YEAR NanoFree - WCSP (DSBGA) 0.17-mm Small Bump - YZA (Pb-free) SN74LVC1G32YZAR Reel of 3000 NanoStar - WCSP (DSBGA) 0.23-mm Large Bump - YEP -40C to 85C TOP-SIDE MARKING _ _ _CG_ SN74LVC1G32YEPR NanoFree - WCSP (DSBGA) 0.23-mm Large Bump - YZP (Pb-free) SOT (SOT-23) - DBV SOT (SC-70) - DCK SOT (SOT-553) - DRL SN74LVC1G32YZPR Reel of 3000 SN74LVC1G32DBVR Reel of 250 SN74LVC1G32DBVT Reel of 3000 SN74LVC1G32DCKR Reel of 250 SN74LVC1G32DCKT Reel of 4000 SN74LVC1G32DRLR C32_ CG_ Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site. YEA/YZA, YEP/YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, * = Pb-free). FUNCTION TABLE INPUTS A B OUTPUT Y H X H X H H L L L logic diagram (positive logic) A B 2 1 2 POST OFFICE BOX 655303 4 Y * DALLAS, TEXAS 75265 SCES219N - APRIL 1999 - REVISED JUNE 2005 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 6.5 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 6.5 V Voltage range applied to any output in the high-impedance or power-off state, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to 6.5 V Voltage range applied to any output in the high or low state, VO (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 V to VCC + 0.5 V Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -50 mA Output clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -50 mA Continuous output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA Package thermal impedance, JA (see Note 3): DBV package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206C/W DCK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252C/W DRL package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142C/W YEA/YZA package . . . . . . . . . . . . . . . . . . . . . . . . . . . 154C/W YEP/YZP package . . . . . . . . . . . . . . . . . . . . . . . . . . . 132C/W Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. 2. The value of VCC is provided in the recommended operating conditions table. 3. The package thermal impedance is calculated in accordance with JESD 51-7. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SCES219N - APRIL 1999 - REVISED JUNE 2005 recommended operating conditions (see Note 4) Operating VCC VIH Supply voltage High-level input voltage VIL Low-level input voltage VI VO Input voltage Data retention only VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V VCC = 2.3 V t/v Low-level output current Input transition rise or fall rate 5.5 0.65 x VCC 1.7 V 2 0.7 x VCC 0.35 x VCC 0.7 0.8 V 0.3 x VCC 0 5.5 V 0 VCC -4 V -8 mA -24 -32 4 8 16 VCC = 3 V UNIT V 1.5 -16 VCC = 3 V VCC = 4.5 V VCC = 1.65 V IOL 1.65 VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V Output voltage High-level output current MAX VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 1.65 V VCC = 2.3 V IOH MIN mA 24 VCC = 4.5 V VCC = 1.8 V 0.15 V, 2.5 V 0.2 V 32 VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V 10 20 ns/V 5 TA Operating free-air temperature -40 85 C NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SCES219N - APRIL 1999 - REVISED JUNE 2005 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC 1.65 V to 5.5 V IOH = -100 mA IOH = -4 mA IOH = -8 mA IOH = -16 mA VOH ICC ICC 2.3 V 1.9 MAX 2.3 4.5 V IOL = 100 mA IOL = 4 mA 1.65 V to 5.5 V 0.1 1.65 V 0.45 IOL = 8 mA IOL = 16 mA 2.3 V 0.3 3.8 0.4 3V VI = 5.5 V or GND, One input at VCC - 0.6 V, IO = 0 Other inputs at VCC or GND Ci VI = VCC or GND All typical values are at VCC = 3.3 V, TA = 25C. V 0.55 4.5 V VI = 5.5 V or GND VI or VO = 5.5 V UNIT V IOH = -32 mA IOL = 32 mA A or B inputs VCC - 0.1 1.2 TYP 2.4 IOL = 24 mA II Ioff 1.65 V 3V IOH = -24 mA VOL MIN 0.55 0 to 5.5 V 5 mA 0 10 mA 1.65 V to 5.5 V 10 mA 3 V to 5.5 V 500 mA 3.3 V 4 pF switching characteristics over recommended operating free-air temperature range, CL = 15 pF (unless otherwise noted) (see Figure 1) PARAMETER tpd FROM (INPUT) TO (OUTPUT) A or B Y VCC = 1.8 V 0.15 V VCC = 2.5 V 0.2 V VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V MIN MAX MIN MAX MIN MAX MIN MAX 1.9 7.2 0.8 4.4 0.9 3.6 0.8 3.4 UNIT ns switching characteristics over recommended operating free-air temperature range, CL = 30 pF or 50 pF (unless otherwise noted) (see Figure 2) PARAMETER tpd FROM (INPUT) TO (OUTPUT) A or B Y VCC = 1.8 V 0.15 V VCC = 2.5 V 0.2 V VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V MIN MAX MIN MAX MIN MAX MIN MAX 2.8 8 1.2 5.5 1.1 4.5 1 4 UNIT ns operating characteristics, TA = 25C PARAMETER Cpd Power dissipation capacitance TEST CONDITIONS f = 10 MHz POST OFFICE BOX 655303 VCC = 1.8 V TYP VCC = 2.5 V TYP 20 * DALLAS, TEXAS 75265 20 VCC = 3.3 V TYP 21 VCC = 5 V TYP 22 UNIT pF 5 SCES219N - APRIL 1999 - REVISED JUNE 2005 PARAMETER MEASUREMENT INFORMATION RL From Output Under Test CL (see Note A) VLOAD Open S1 GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V 0.15 V 2.5 V 0.2 V 3.3 V 0.3 V 5 V 0.5 V VI tr/tf VCC VCC 3V VCC 2 ns 2 ns 2.5 ns 2.5 ns VM VLOAD CL RL V VCC/2 VCC/2 1.5 V VCC/2 2 x VCC 2 x VCC 6V 2 x VCC 15 pF 15 pF 15 pF 15 pF 1 M 1 M 1 M 1 M 0.15 V 0.15 V 0.3 V 0.3 V VI Timing Input VM 0V tw tsu VI Input VM VM th VI Data Input VM VM 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VI VM Input VM 0V tPLH tPHL VOH VM Output VM VOL tPHL Output Waveform 1 S1 at VLOAD (see Note B) tPLH VM VM VM 0V tPZL tPLZ VLOAD/2 VM tPZH VOH Output VI Output Control VM VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS Output Waveform 2 S1 at GND (see Note B) VOL + V VOL tPHZ VM VOH - V VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 . D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SCES219N - APRIL 1999 - REVISED JUNE 2005 PARAMETER MEASUREMENT INFORMATION RL From Output Under Test CL (see Note A) VLOAD Open S1 GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V 0.15 V 2.5 V 0.2 V 3.3 V 0.3 V 5 V 0.5 V VI tr/tf VCC VCC 3V VCC 2 ns 2 ns 2.5 ns 2.5 ns VM VLOAD CL RL V VCC/2 VCC/2 1.5 V VCC/2 2 x VCC 2 x VCC 6V 2 x VCC 30 pF 30 pF 50 pF 50 pF 1 k 500 500 500 0.15 V 0.15 V 0.3 V 0.3 V VI Timing Input VM 0V tw tsu VI Input VM VM th VI Data Input VM VM 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VI VM Input VM 0V tPLH tPHL VOH VM Output VM VOL tPHL Output Waveform 1 S1 at VLOAD (see Note B) tPLH VM VM VM 0V tPZL tPLZ VLOAD/2 VM tPZH VOH Output VI Output Control VM VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS Output Waveform 2 S1 at GND (see Note B) VOL + V VOL tPHZ VM VOH - V VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 . D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 2. Load Circuit and Voltage Waveforms POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 10-Oct-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74LVC1G32DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DBVRE4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DBVTE4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DCKR ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DCKRE4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DCKRG4 ACTIVE SC70 DCK 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DCKT ACTIVE SC70 DCK 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DCKTE4 ACTIVE SC70 DCK 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DRLR ACTIVE SOP DRL 5 4000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32DRLRG4 ACTIVE SOP DRL 5 4000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC1G32YEAR ACTIVE WCSP YEA 5 3000 TBD SNPB Level-1-260C-UNLIM SN74LVC1G32YEPR ACTIVE WCSP YEP 5 3000 TBD SNPB Level-1-260C-UNLIM SN74LVC1G32YZAR ACTIVE WCSP YZA 5 3000 Pb-Free (RoHS) SNAGCU Level-1-260C-UNLIM SN74LVC1G32YZPR ACTIVE WCSP YZP 5 3000 Pb-Free (RoHS) SNAGCU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 10-Oct-2005 provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA MPDS025C - FEBRUARY 1997 - REVISED FEBRUARY 2002 DCK (R-PDSO-G5) PLASTIC SMALL-OUTLINE PACKAGE 0,30 0,15 0,65 5 0,10 M 4 1,40 1,10 1 0,13 NOM 2,40 1,80 3 Gage Plane 2,15 1,85 0,15 0-8 0,46 0,26 Seating Plane 1,10 0,80 0,10 0,00 0,10 4093553-2/D 01/02 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion. Falls within JEDEC MO-203 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated