QSD2030F — Plastic Silicon Photodiode
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
QSD2030F Rev. 1.1.1
July 2010
QSD2030F
Plastic Silicon Photodiode
Features
PIN photodiode
Package type: T-1 3/4 (5mm lens diameter)
Wide reception angle, 40°
Daylight filter
Package material and color: black epoxy
High sensitivity
Peak sensitivity
λ
= 880nm
Radiant sensitive area: 1.245mm x 1.245mm
Package Dimensions
0.195 (4.95)
0.040 (1.02)
NOM
0.100 (2.54)
NOM
0.050 (1.25)
0.800 (20.3)
MIN
0.305 (7.75)
0.240 (6.10)
0.215 (5.45)
0.020 (0.51)
SQ. (2X)
REFERENCE
SURFACE
CATHODE
CATHODE
ANODE
Notes:
1. Dimensions for all drawings are in inches (mm).
2. Tolerance of ±0.010 (0.25) on all non-nominal dimensions unless otherwise specified.
Schematic
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
QSD2030F Rev. 1.1.1 2
QSD2030F — Plastic Silicon Photodiode
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Notes:
1. Derate power dissipation linearly 1.33mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as cleaning agents.
4. Soldering iron 1/16” (1.6mm) minimum from housing.
Electrical/Optical Characteristics
(T
A
=25°C)
Symbol Parameter Rating Unit
T
OPR
Operating Temperature -40 to +100 °C
T
STG
Storage Temperature -40 to +100 °C
T
SOL-I
Soldering Temperature (Iron)
(2,3,4)
240 for 5 sec °C
T
SOL-F
Soldering Temperature (Flow)
(2,3)
260 for 10 sec °C
V
BR
Reverse Breakdown Voltage 50 V
P
D
Power Dissipation
(1)
100 mW
Symbol Parameter Test Conditions Min. Typ. Max. Units
λ
PS
Peak Sensitivity Wavelength 880 nm
λ
SR
Wavelength Sensitivity Range 700 1100 nm
Θ
Reception Angle ±20 °
V
F
Forward Voltage I
F
= 80mA 1.3 V
I
D
Reverse Dark Current V
R
= 10V, Ee = 0 10 nA
I
L
Reverse Light Current Ee = 0.5mW/cm
2
, V
R
= 5V,
λ
= 950nm
15 25 µA
V
O
Open Circuit Voltage Ee = 0.5mW/cm
2
,
λ
= 880nm 420 mV
TC
V
Temperature Coefficient of V
O
+0.6 mV
/
K
I
SC
Short Circuit Current Ee = 0.5mW/cm
2
,
λ
= 880nm 50 µA
TC
I
Temperature Coefficient of I
SC
+0.3 %
/
K
C Capacitance V
R
= 0, f = 1MHz, Ee = 0 60 pF
t
r
Rise Time V
R
= 5V, R
L
= 50
,
λ
= 950nm 5 ns
t
f
Fall Time 5
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
QSD2030F Rev. 1.1.1 3
QSD2030F — Plastic Silicon Photodiode
Typical Performance Characteristics
Figure 4. Dark Current vs. Reverse VoltageFigure 3. Capacitance vs. Reverse Voltage
Figure 1. Reverse Light Current vs. Emitter Output Power Figure 2. Angular Response
VR–Break Down Voltage (V)
ID–Dark Current (nA)
Vr–Reverse Voltage (V)
Cj–Capacitance (pF)
051015 20 25 30 35
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
T
A
= 25°C
V
R
= 5V
T
A
= 25°C
024681012141618 20
14
12
10
8
6
4
2
0
Ee–Emitter output power (mw/cm2)
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
10° 20°
30°
40°
50°
60°
70°
80°
90°
1.0
0.9
0.8
0.7
IL–Reverse Light Current Voltage (µA)
0
5
10
15
20
25
30
35
40
45
50
55
©2010 Fairchild Semiconductor Corporation www.fairchildsemi.com
QSD2030F Rev. 1.1.1 4
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,andisnot
intended to be an exhaustive list of all such trademarks.
AccuPower
Auto-SPM
Build it Now
CorePLUS
CorePOWER
CROSSVOLT
CTL
Current Transfer Logic
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax
ESBC
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series
FACT®
FAST®
FastvCore
FETBench
FlashWriter®*
FPS
F-PFS
FRFET®
Global Power ResourceSM
Green FPS
Green FPSe-Series
Gmax
GTO
IntelliMAX
ISOPLANAR
MegaBuck
MICROCOUPLER
MicroFET
MicroPak
MicroPak2
MillerDrive
MotionMax
Motion-SPM
OptoHiT™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM
PowerTrench®
PowerXS™
Programmable Active Droop
QFET®
QS
Quiet Series
RapidConfigure
Saving our world, 1mW/W/kW at a time™
SignalWise
SmartMax
SMART START
SPM®
STEALTH
SuperFET
SuperSOT-3
SuperSOT-6
SuperSOT-8
SupreMOS®
SyncFET
Sync-Lock™
®*
The Power Franchise®
TinyBoost
TinyBuck
TinyCalc
TinyLogic®
TINYOPTO
TinyPower
TinyPWM
TinyWire
TriFault Detect
TRUECURRENT*
"SerDes
UHC®
Ultra FRFET
UniFET
VCX
VisualMax
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a)
are intended for surgical implant into the body or (b) support or
sustain life, and (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on ourexternal website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance,failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customersfromthe
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized FairchildDistributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical
and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.
Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet
Identification
Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I49
n
QSD2030F — Plastic Silicon Photodiode