LED Lighting for
PAY PAY
For Backlighting
For Buttons, Reels
and General Illumination
LED
Linear Light
Based LED
Based LEDs SELECTOR GUIDE
With the technological advancements in Light Emitting Diodes
(LEDs) brightness can now rival the incandescent lamp when
used in similar packages. These advancements have allowed
for a new type of product called the Based LED - an LED with
the fit and functionality of an incandescent light bulb.
Dialight's line of based LEDs were designed with flexibility and
efficiency in mind.
S
Longer life - up to 100,000 hrs
S
Energy savings - 90% less power required
S
High reliability - vibration and shock resistant
S
Multi-chip, Cluster, and Single Ultra-Bright Chip
S
AlInGaP and InGaN die technology
S
Polarized and non-polarized
S
Single and multi-voltage input
T 3 1/4 Miniature
Bayonet
(BA9S)
T 3 1/4 Miniature
Bayonet
(BA9S)
T 3 1/4
Wedge
(T10)
T 3 1/4
Miniature
Screw (E10)
DDDDDDDD DD
DDDDDDDD DDD
DDDDDDDD D
DDDDDDDD D
DDDDDDDDD
BASE 6 12/14* 24/28* 120 NON- 6-36
STYLE CONFIG. RED GREEN AMBER BLUE WHITE VDC VDC VDC VAC POLARIZED POLARIZED AC/DC
Single Chip
Single Chip
Cluster
Cluster
Cluster
T 1 3/4
Wedge
(T5)
LED Configuration:
Single Chip - The single chip design consists of a single ultra-bright LED of the latest LED technology, AlInGaP or InGaN, which is
mounted onto an incandescent base. Even though there is only one LED, this high intensity product can provide equivalent light output of the
bulb it replaces. This design has a slightly narrower viewing angle than either the multi-chip or cluster, yet is one of the most cost-effective
designs available.
Cluster - The cluster uses multiple discrete SMD or 3 mm T1 LEDs mounted into the appropriate incandescent base. The viewing angle
of the cluster is 120°, however the use of multiple LEDs increases the overall light output. The overall design provides flexibility where the lat-
est in LED technology, AlInGaP and InGaN, can be employed.
Multi-chip - The multi-chip device incorporates 6 LED die-mounted on a specially designed ceramic header which is then placed onto a
traditional incandescent base. It's unique construction enables versatility; not only can the die be mounted on this header but additional com-
ponents can be added. Typical viewing angle of the multi-chip is 120°.
Polarity
LEDs are diodes which allow current to flow in only one direction. In order to utilize them with an alternating power source (AC), or if you
are unfamiliar with the polarity of your circuit, a rectifying circuit must be used. Dialight's non-polarized based LEDs incorporate a full wave
rectifier and all the necessary components to allow proper operation in any circuit providing the correct voltage is used.
Maximizing Light Output
In order to maximize the light output from a based LED, it is important to match the color of the lens cap to the emitting color of the LED.
Unlike the incandescent lamp that emits light over the full spectrum, LEDs are monochromatic (emit one color). Since a lens cap is a filter, if
not matched properly the overall light output may be substantially reduced.
SAMPLING OF PRODUCT
Dominant Forward
Part Color Wavelength Current Intensity
Number (TYP- nm) Voltage (TYP. mA) (TYP.-mcd)
586-2201-201 Red 615 6 VDC 15 888
586-2202-201 Green 528 6 VDC 15 784
586-2203-201 Yellow 591 6 VDC 15 628
586-2205-201 Blue 470 6 VDC 15 252
586-2206-201 White * 6 VDC 15 1680
586-220A-201 White/Yellow * / 591 6 VDC 15 1154
586-220B-201 White/Orange * / 610 6 VDC 15 1232
586-2201-202 Red 615 12 VDC 15 888
586-2202-202 Green 528 12 VDC 15 784
586-2203-202 Yellow 591 12 VDC 15 628
586-2205-202 Blue 470 12 VDC 15 252
586-2206-202 White * 12 VDC 15 1680
586-220A-202 White/Yellow * / 591 12 VDC 15 1154
586-220B-202 White/Orange * / 610 12 VDC 15 1232
586-2201-203 Red 615 14 VDC 15 888
586-2202-203 Green 528 14 VDC 15 784
586-2203-203 Yellow 591 14 VDC 15 628
586-2205-203 Blue 470 14 VDC 15 252
586-2206-203 White * 14 VDC 15 1680
586-220A-203 White/Yellow * / 591 14 VDC 15 1154
586-220B-203 White/Orange * / 610 14 VDC 15 1232
586-2201-204 Red 615 24 VDC 15 888
586-2202-204 Green 528 24 VDC 15 784
586-2203-204 Yellow 591 24 VDC 15 628
586-2205-204 Blue 470 24 VDC 15 252
586-2206-204 White * 24 VDC 15 1680
586-220A-204 White/Yellow * / 591 24 VDC 15 1154
586-220B-204 White/Orange * / 610 24 VDC 15 1232
Dialight reserves the right to make changes at any
time in order to supply the best product possible.
Dominant Forward
Part Color Wavelength Current Intensity
Number (TYP- nm) Voltage (TYP. mA) (TYP.-mcd)
586-1201-201 Red 615 6 VDC 35 450
586-1202-201 Green 528 6 VDC 15 120
586-1203-201 Yellow 587 6 VDC 35 450
586-1205-201 Blue 470 6 VDC 15 50
586-1206-201 White * 6 VDC 15 320
586-1201-202 Red 615 12 VDC 18 450
586-1202-202 Green 528 12 VDC 11 170
586-1203-202 Yellow 587 12 VDC 18 450
586-1205-202 Blue 470 12 VDC 11 70
586-1206-202 White * 12 VDC 11 450
586-1201-203 Red 615 14 VDC 20 500
586-1202-203 Green 528 14 VDC 12 185
586-1203-203 Yellow 587 14 VDC 20 500
586-1205-203 Blue 470 14 VDC 12 75
586-1206-203 White * 14 VDC 12 500
586-1201-204 Red 615 24 VDC 14 350
586-1202-204 Green 528 24 VDC 14 215
586-1203-204 Yellow 587 24 VDC 14 350
586-1205-204 Blue 470 24 VDC 14 85
586-1206-204 White * 24 VDC 14 580
586-1201-205 Red 615 28 VDC 14 350
586-1202-205 Green 528 28 VDC 13 210
586-1203-205 Yellow 587 28 VDC 14 350
586-1205-205 Blue 470 28 VDC 13 80
586-1206-205 White * 28 VDC 13 540
* White Color Coordinates: x = .320, y = .310
T 3 1/4 WEDGE (T10)
SOperating Voltages: 6,12,14 and 24 VDC
(T5 also available in 28 VDC)
SNon-polarized
SOperating temperature: -30oC to +85oC
SStorage temperature: -40oC to +100oC
T 1 3/4 WEDGE (T5)
SReplaces incandescent lamp numbers:
79, 16, 84, 86, 18, 37, 70, 73, 74, 17, 85**
586 Series BASED LEDS
SReplaces incandescent lamp numbers: 159,
259, 444, 447, 555, 3-501, 3-504, 3-509, 124, 158,
161, 168, 193, 194, 658, 184, 3-505, 3-507**
** May replace other incandescent lamps
To Illuminate Switches and Reels
T 1 3/4 WEDGE (T5)
T 3 1/4 WEDGE (T10)
For Back Lighting Panels
18 inch (460 mm) Linear Light Strip
SOperating Requirements: Constant current source of 700 mA*
SOperating Temperature: -40oC to +55oC
SStorage Temperature: -40oC to +120oC
SLumens Output: up to 360 lumens
SHousing Material: Black Aluminum
SLens Material: Polycarbonate
UL94 flammability rating
SProjected life: 50,000 hours
(70% initial output after 50,000 hours)
*Example: Advance Transformer Part Number
120VAC input - LED 120A0700C24F
230VAC input - LED 913700518806
Dialight reserves the right to make changes at any
time in order to supply the best product possible.
Dialight Corporation
1501 Route 34 South
Farmingdale, NJ 07727 USA
Tel: 1-732-919-3119 • Fax: 1-732-751-5778
www.dialight.com
A Roxboro Group Company
TYPICAL
PART NUMBER LUMEN OUTPUT COLOR LENS
SLW-46021-ICA 120 Warm White non-diffused
SLW-46021-ICB 120 Warm White diffused
SLC-46027-ICA 150 Cool White non-diffused
SLC-46027-ICB 150 Cool White diffused
SLW-46042-ICA 240 Warm White non-diffused
SLW-46042-ICB 240 Warm White diffused
SLC-46054-ICA 300 Cool White non-diffused
SLC-46054-ICB 300 Cool White diffused
MBEXGAMX001_A