US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded High SRF Inductors
–
0805PS
Document 265-1
Document 265-1 Revised 03/05/18
L2
DCR4
SRF5
Part ±10%
Q min3 max typ
Isat6
Irms7
number1 (µH) at 1 MHz (Ohms) (MHz) (A) (A)
0805PS-102KL_ 1.0 21 0.14 340 0.90 1.6
0805PS-152KL_ 1.5 21 0.18 265 0.85 1.3
0805PS-272KL_ 2.7 21 0.35 190 0.60 0.88
0805PS-332KL_ 3.3 21 0.50 180 0.55 0.70
0805PS-392KL_ 3.9 21 0.74 165 0.50 0.61
0805PS-472KL_ 4.7 21 0.85 155 0.43 0.59
0805PS-562KL_ 5.6 21 0.91 143 0.38 0.57
0805PS-682KL_ 6.8 21 1.37 118 0.32 0.46
0805PS-103KL_ 10 21 1.51 66 0.27 0.43
0805PS-153KL_ 15 21 2.04 34 0.22 0.34
0805PS-223KL_ 22 25 2.48 22 0.18 0.33
0805PS-333KL_ 33 25 3.00 17 0.16 0.28
0805PS-473KL_ 47 25 3.85 15 0.15 0.26
0805PS-683KL_ 68 28 4.42 12 0.12 0.24
0805PS-823KL_ 82 30 6.00 12 0.11 0.21
0805PS-104KL_ 100 32 6.96 9.0 0.10 0.19
0805PS-124KL_ 120 32 7.51 7.7 0.10 0.18
0805PS-154KL_ 150 32 8.33 5.0 0.08 0.18
0805PS-224KL_ 220 32 13.71 5.0 0.07 0.14
0805PS-334KL_ 330 32 20.53 3.5 0.06 0.11
1. When ordering, please specify termination and packaging codes:
0805PS-334KLC
Terminations: L = RoHS compliant, not halogen-free. Silver-palladium-
platinum-glass frit terminations
R = Halogen free component. Matte tin over nickel over
silver-platinum-glass frit terminations.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape
(1500 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per full
reel).
2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMD -A
fixture in Agilent/HP 4263B LCR meter.
3. Q measured on an Agilent/HP 4291 with an Agilent/HP 16193 test
fixture.
4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DC current at 25°C that causes an inductance drop of 10% (typ) from
its value without current. Click for temperature derating information.
7. Current that causes a 40°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Designer’s Kit C348 contains 6 of each part
Core material Ceramic/Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Environmental RoHS compliant; halogen free optional
Terminations Silver-palladium-platinum-glass frit. Other terminations
available at additional cost
Weight 57.6 – 62.4 mg
Ambient temperature –40°C to +65°C with Irms current
Maximum part temperature +105°C (ambient + temp rise) Derating.
Storage temperature Component: –40°C to +105°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1500/7″reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 2.34 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
• Higher SRF and than our other power inductors
• High inductance with tight tolerance
• Excellent current handling for a part this size
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 265-2
Power Chip Inductors - 0805PS Series
0.1
1
10
100
1000
110100
1000
Current (mA)
Inductance (µH)
10 µH
3.3 µH
330 µH
100 µH
1µH
A B C
max max max D E F G H I J
0.133 0.118 0.079 0.053 0.080 0.050 0.020 0.070 0.040 0.030 inches
3,38 3,00 2,00 1,35 2,03 1,27 0,51 1,78 1,02 0,76 mm
A
B
FD
C
E
G
I
I
J
H
Recommended
Land
Pattern
Terminal wraparound:
approx 0.010/0,25 both ends
Typical L vs Frequency Typical L vs Current
0.1
1
10
100
1000
0.01 0.1
11
0
Frequency (MHz)
Inductance (µH)
10 µH
3.3 µH
330 µH
100 µH
1µH
0.1
11
0
Frequency (MHz)
Q factor
10 µH
3.3 µH
330 µH
1µH
100 µH
70
60
50
40
30
20
10
0
Typical Q vs Frequency
Document 265-2 Revised 03/05/18
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Coilcraft:
0805PS-823KLB 0805PS-332KLB 0805PS-154KLC 0805PS-102KLC 0805PS-124KLC 0805PS-104KLB 0805PS-
103KLB 0805PS-152KLB 0805PS-334KLB 0805PS-223KLC 0805PS-154KLB 0805PS-224KLB 0805PS-272KLB
0805PS-392KLB 0805PS-333KLB 0805PS-102KLB 0805PS-153KLC 0805PS-683KLB 0805PS-472KLC 0805PS-
473KLC 0805PS-223KLB 0805PS-682KLC 0805PS-683KLC 0805PS-334KLC 0805PS-152KLC 0805PS-472KLB
0805PS-224KLC 0805PS-392KLC 0805PS-333KLC 0805PS-272KLC 0805PS-153KLB 0805PS-473KLB 0805PS-
332KLC 0805PS-562KLB 0805PS-124KLB 0805PS-104KLC 0805PS-103KLC 0805PS-823KLC 0805PS-562KLC
0805PS-682KLB
