MSM Vishay Dale Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Single-In-Line, Molded SIP; 01, 03, 05 Schematics FEATURES * MIL-PRF-83401 qualified * 0.195" [4.95mm] "A" and 0.350" [8.89mm] "C" maximum seated heights * Highly stable thick film * TCR available in "K" ( 100ppm/C) or "M" ( 300ppm/C) characteristic * All device leads are hot-solder dipped * Rugged molded case construction * Compatible with automatic insertion equipment * 100% screen tested per Group A, Subgroup 1 of MIL-PRF-83401 * All devices are capable of passing the MIL-STD-202, Method 210, Condition D "Resistance to Soldering Heat" test * Available in tube pack STANDARD ELECTRICAL SPECIFICATIONS MODEL/ SCHEMATIC PROFILE RESISTOR PACKAGE POWER RATING POWER RATING Max. @ 70C Max. @ 70C W W RESISTANCE RANGE STANDARD TOLERANCE* % TEMPERATURE COEFFICIENT** (- 55C to + 125C) WEIGHT g MSM06A MSM08A MSM10A 01 01 01 0.12 0.12 0.12 0.60 0.84 1.08 10 - 1M 2 K, M 0.4 0.5 0.6 MSM06A MSM08A MSM10A 03 03 03 0.12 0.12 0.12 0.36 0.48 0.60 10 - 1M 2 K, M 0.4 0.5 0.6 MSM06A MSM08A MSM10A 05 05 05 0.07 0.07 0.07 0.60 0.84 1.08 Consult factory 2 K, M 0.4 0.5 0.6 MSM06C MSM08C MSM10C 01 01 01 0.20 0.20 0.20 1.00 1.40 1.80 10 - 1M 2 K, M 0.7 0.9 1.1 MSM06C MSM08C MSM10C 03 03 03 0.20 0.20 0.20 0.60 0.80 1.00 10 - 1M 2 K, M 0.7 0.9 1.1 MSM06C MSM08C MSM10C 05 05 05 0.11 0.11 0.11 0.88 1.32 1.80 Consult factory 2 K, M 0.7 0.9 1.1 * 1% and 5% available ** K = 100ppm/C; M = 300ppm/C TECHNICAL SPECIFICATIONS MECHANICAL SPECIFICATIONS PARAMETER UNIT MSM Series Maximum Operating Voltage VDC 50 Veff < 50ppm VAC 200 min. Insulation Resistance 10,000M Operating Temperature Range C - 55 to + 125 Storage Temperature Range C - 55 to + 150 Voltage Coefficient of Resistance Dielectric Strength www.vishay.com 58 Body: Molded epoxy. Terminals: Copper alloy, hot-solder dipped. Solderability: Per MIL-PRF-83401. For Technical Questions, contact: ff2aresistors@vishay.com Document Number: 31514 Revision 05-Aug-02 MSM Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 - Type RZ DIMENSIONS in inches [millimeters] "C" Profile "A" Profile 0.030 + 0.005 - 0.015 [0.762 + 0.127 - 0.381] 0.030 + 0.005 - 0.015 [0.762 + 0.127 - 0.381] A 0.187 + 0.008 - 0.010 [4.75 + 0.203 - 0.254] Pin # 1 0.040 + 0.009 - 0.015 [1.02 + 0.229 - 0.381] 0.342 + 0.008 - 0.010 [8.69 + 0.203 - 0.254] Pin # 1 0.040 + 0.009 - 0.015 [1.02 + 0.229 - 0.381] 0.100 0.005 [2.54 0.127] Non-Accumulative 0.135 + 0.015 - 0.010 [3.43 + 0.381 - 0.254] 0.017 0.004 [0.432 0.102] B C Equal Space 0.100 0.005 [2.54 0.127] Non-Accumulative A 0.017 0.004 0.135 + 0.015 - 0.010 [0.432 0.102] [3.43 + 0.381 B 0.254] C Equals Spaces 0.098 max. [2.49 max.] 0.098 max. [2.49 max.] 0.012 0.004 [0.305 0.102] MODEL A B C MSM06 0.583 0.015 [14.81 0.381] 0.500 [12.70] 5 MSM08 0.783 0.015 [19.89 0.381] 0.700 [17.78] 7 MSM10 0.983 0.015 [24.97 0.381] 0.900 [22.86] 9 0.012 0.004 [0.305 0.102] ORDERING INFORMATION - MILITARY PART NUMBER 01, 03 Schematics K K CHARACTERISTIC "A" PROFILE M8340107 "C" PROFILE M8340104 DETAIL SPEC. NO. "A" PROFILE M8340107 = 6 pin SIP RZ070 M8340108 = 8 pin SIP RZ080 M8340109 = 10 pin SIP RZ090 EXAMPLE: M8340104K1003GG = A high profile single-in-line resistor network with 6 pins and a TCR of 100ppm/C, resistance value of 100 kilohm, tolerance of 2% and "G" Schematic. A001* K G H A001* K G H CHARACTERISTIC RESISTANCE VALUE TOLERANCE SCHEMATIC "A" PROFILE M8340107 "C" PROFILE M8340104 DETAIL SPEC. NO. "A" PROFILE M8340107 = 6 pin SIP RZ070 M8340108 = 8 pin SIP RZ080 M8340109 = 10 pin SIP RZ090 C or G C or G SCHEMATIC F = 1% K = 100ppm/C The first three digits are M = 300ppm/C significant figures. The last G= 2% digit specifies number of J = 5% zeros to follow. "C" PROFILE M8340104 = 6 pin SIP RZ040 M8340105 = 8 pin SIP RZ050 M8340106 = 10 pin SIP RZ060 EXAMPLE: M8340107K1003GC = A low profile single-in-line resistor network with 6 pins and a TCR of 100ppm/C, resistance value of 100 kilohm, tolerance of 2% and a "C" Schematic. 05 Schematic G 1003 G 1003 RESISTANCE VALUE TOLERANCE "C" PROFILE M8340104 = 6 pin SIP RZ040 M8340105 = 8 pin SIP RZ050 M8340106 = 10 pin SIP RZ060 K = 100ppm/C M = 300ppm/C F = 1% G= 2% J = 5% M83401 assigned code for values of R1 and R2. EXAMPLE: EXAMPLE: M8340104KA001GH = A high profile single-in-line resistor network M8340107KA001GH = A low profile single-in-line resistor network with 6 pins, a TCR of 100ppm/C, R1 resistance value of 82 ohm, R2 with 6 pins, a TCR of 100ppm/C, R1 resistance value of 82 ohm, resistance value of 130 ohm, tolerance of 2% and "H" Schematic. R2 resistance value of 130 ohm, tolerance of 2% and "H" Schematic. * The H Schematic resistance values are specified by a 4-digit code, which comes from MIL-R-83401. The codes and corresponding resistance values are: CODE A001 A002 A003 A004 A005 A006 R1 (Ohms) 82 120 130 160 180 180 Document Number: 31514 Revision 05-Aug-02 R2 (Ohms) 130 200 210 260 240 390 CODE R1 (Ohms) R2 (Ohms) A007 A008 A009 A010 A011 A012 220 220 330 330 330 1.5k 270 330 390 470 680 3.3k CODE A013 A014 A015 A016 A017 A018 For Technical Questions, contact: ff2aresistors@vishay.com R1 (Ohms) 3k 180 270 560 560 620 R2 (Ohms) 6.2k 270 270 560 1.2k 2.7k www.vishay.com 59 MSM Vishay Dale Thick Film Resistor Networks, Military, MIL-PRF-83401 - Type RZ Derating 01 Schematic "C" Profile Power Rating (Watts) Power Rating (Watts) "A" Profile MSM10A Package 1.08 MSM08A Package 0.84 MSM06A Package 0.60 MSM10C Package 1.80 MSM08C Package 1.40 MSM06C Package 1.00 Single Resistor 0.12 - 55 + 25 + 70 + 125 + 150 Ambient TemperatureC - 55 0.60 0.48 0.36 0 MSM10A Package MSM08A Package 1.00 0.80 0.60 MSM08C Package MSM06C Package MSM06A Package Single Resistor Single Resistor 0.12 - 55 0 + 25 + 70 + 125 + 150 Ambient TemperatureC - 55 "A" Profile 1.08 MSM10A Package 0.84 MSM08A Package 0.60 0 + 25 + 70 + 125 + 150 Ambient TemperatureC "C" Profile Power Rating (Watts) Power Rating (Watts) + 70 + 125 + 150 Ambient TemperatureC MSM10C Package 0.20 05 Schematic + 25 "C" Profile "A" Profile Power Rating (Watts) Power Rating (Watts) 03 Schematic 0 Single Resistor 0.20 MSM10C Package 1.80 1.32 MSM08C Package MSM06A Package MSM06C Package 0.88 0.11 Single Resistor Single Resistor 0.07 - 55 www.vishay.com 60 0 + 25 + 70 + 125 + 150 Ambient TemperatureC - 55 0 For Technical Questions, contact: ff2aresistors@vishay.com + 25 + 70 + 125 + 150 Ambient TemperatureC Document Number: 31514 Revision 05-Aug-02 MSM Thick Film Resistor Networks, Military, MIL-PRF-83401 - Type RZ Vishay Dale CIRCUIT APPLICATION 5, 7 or 9 resistors with one pin common 01 Schematic "A" Profile MSM06A-01 (M8340107xxxxxxC) MSM08A-01 (M8340108xxxxxxC) MSM10A-01 (M8340109xxxxxxC) "C" Profile MSM06C-01 (M8340104xxxxxxC) MSM08C-01 (M8340105xxxxxxC) MSM10C-01 (M8340106xxxxxxC) The MSM06A-01, MSM08A-01, MSM10A-01, MSM06C-01, MSM08C-01 and MSM10C-01 molded single-in-line resistor networks provide the user with a choice of 5, 7 or 9 nominally equal resistors, each connected to a common pin (Pin No. 1). Commonly used in the following applications: 1 2 3 n-1 n * "Wired OR" Pull-up * Power Gate Pull-up * MOS/ROM Pull-up/Pull-down 03 Schematic 3, 4 or 5 isolated resistors "A" Profile MSM06A-03 (M8340107xxxxxxG) MSM08A-03 (M8340108xxxxxxG) MSM10A-03 (M8340109xxxxxxG) 1 2 3 4 n-1 n 05 Schematic * Long-Line Impedance Balance * LED Current Limiting * ECL Output Pull-down * TTL Input Pull-down 4, 6 or 8 isolated resistors "A" Profile MSM06A-05 (M8340107xxxxxxH) MSM08A-05 (M8340108xxxxxxH) MSM10A-05 (M8340109xxxxxxH) R2 R1 2 "C" Profile MSM06C-03 (M8340104xxxxxxG) MSM08C-03 (M8340105xxxxxxG) MSM10C-03 (M8340106xxxxxxG) The MSM06A-03, MSM08A-03, MSM10A-03, MSM06C-03, MSM08C-03 and MSM10C-03 molded single-in-line resistor networks provide the user with a choice of 3, 4 or 5 nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: * "Wired OR" Pull-up * Power Driven Pull-up * Power Gate Pull-up * Line Termination 1 * Open Collector Pull-up * TTL Input Pull-down * TTL Unused Gate Pull-up 3 n-1 n "C" Profile MSM06C-05 (M8340104xxxxxxH) MSM08C-05 (M8340105xxxxxxH) MSM10C-05 (M8340106xxxxxxH) The MSM06A-05, MSM08A-05, MSM10A-05, MSM06C-05, MSM08C-05 and MSM10C-05 molded single-in-line resistor networks provide the user with a choice of 4, 6 or 8 pair of R1/R2 resistor values for pulse squaring and TTL dual-line terminating requirements. PERFORMANCE TEST CONDITIONS MAX. R (Typical Test Lots) Power Conditioning 1.5 x rated power, applied 1.5 hours "ON" and 0.5 hour "OFF" for 100 hours 4 hours at + 25C ambient temperature 0.50% R Thermal Shock 5 cycles between - 65C and + 125C 0.50% R Short Time Overload 2.5 x rated working voltage 5 seconds 0.25% R (Characteristic K) 0.50% R (Characteristic M) Low Temperature Operation 45 minutes at full rated working voltage at - 65C 0.25% R (Characteristic K) 0.50% R (Characteristic M) Moisture Resistance 240 hours with humidity ranging from 80% RH to 98% RH 0.50% R Resistance to Soldering Heat Leads immersed in + 260C solder to within 1/16" of body for 10 seconds 0.25% R Shock Total of 18 shocks at 100 G's 0.25% R Vibration 12 hours at maximum of 20 G's between 10 and 2,000 Hz 0.25% R Load Life 1000 hours at + 70C, rated power applied 1.5 hours "ON", 0.5 hour "OFF" for full 1000 hour period 0.50% R (Characteristic K) 2.00% R (Characteristic M) Terminal Strength 4 1/2 pound pull for 30 seconds 0.25% R Insulation Resistance 10,000 Megohm (minimum) -- Dielectric Withstanding Voltage No evidence of arcing or damage (200 V RMS for 1 minute) -- Document Number: 31514 Revision 05-Aug-02 For Technical Questions, contact: ff2aresistors@vishay.com www.vishay.com 61