PWR70XX 11/98 REV F Page 1
Product Data Sheet 5 WATTS REGULATED
DC/DC CONVERTER
Internet: http://www.cdpowerelectronics.com
Power Electronics Division, United States
3400 E Britannia Drive, Tucson, Arizona 85706
Phone: 800.547.2537 Fax: 520.770.9369
Power Electronics Division, Europe
C&D Technologies (Power Electronics) Ltd.
132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland
Tel: +353.61.474.133 Fax:+353.61.474.141
PWR70XX
FEATURES
HIGH RELIABILITY
SHORT-CIRCUIT PROTECTED
FOLDBACK CURRENT LIMIT
HIGH EFFICIENCY
LINEAR OUTPUT REGULATION
TRACKING OUTPUTS
SIX-SIDED SHIELDING
INTERNAL INPUT AND OUTPUT
FILTERING
NON-CONDUCTIVE CASE
INDUSTRY STANDARD PINOUT
500VDC ISOLATION
DESCRIPTION
The PWR70XX Series uses advanced circuit design and
packaging technology to realize superior reliability and
performance. A 170kHz driven push-pull oscillator is used
to ensure stable frequency and non-saturating operation of
the input stage. This means there are no high peak
voltages or currents like other design topologies, which can
severely reduce unit reliability. Reliability is further enhanced
by the use of MOSPOWER transistors. These rugged
devices permit higher frequency operation with less
complicated drive circuitry than is possible with bipolar
power transistors. Reduced parts count adds to the reliability
of the PWR70XX Series.
Continuous short-circuit protection and foldback current
limiting make the PWR70XX Series rugged devices for use
in demanding system applications. These features add to
the overall reliability of the PWR70XX Series by reducing
the possibility of inadvertently damaging the unit due to an
output overload.
The high efficiency of the PWR70XX Series means low
internal power dissipation. With less heat dissipated, the
PWR70XX Series can operate at higher ambient temperature
with no degradation of reliablility.
The PWR70XX Series offers the user low cost without
sacrificing reliability. The use of surface mounted devices
and manufacturing technologies makes it possible to offer
premium performance and low cost.
PWR70XX 11/98 REV FPage 2
NOMINAL RATED RATED REFLECTED
INPUT OUTPUT OUTPUT NO RATED RIPPLE
VOLTAGE VOLTAGE CURRENT LOAD LOAD CURRENT EFFICIENCY
MODEL (VDC) (VDC) (mA) (mA) (mA) (mAp-p) (%)
PWR7000 5 5 1000 50 1580 30 63
PWR7004 5 ±12 ±210 50 1490 30 67
PWR7005 5 ±15 ±167 50 1450 30 69
PWR7006 12 5 1000 30 620 30 67
PWR7010 12 ±12 ±210 30 580 30 72
PWR7011 12 ±15 ±167 30 570 30 73
PWR7012 15 5 1000 30 500 30 67
PWR7016 15 ±12 ±210 30 480 30 70
PWR7017 15 ±15 ±167 30 460 30 73
PWR7018 24 5 1000 30 320 30 65
PWR7022 24 ±12 ±210 30 310 30 67
PWR7023 24 ±15 ±190 30 355 30 68
PWR7030 48 5 1000 20 165 30 63
PWR7033 48 ± 5 ±500 20 168 30 62
ELECTRICAL SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
INPUT CURRENT
NOTE: Other input to output voltages may be available. Please consult factory.
COMMON SPECIFICATIONS
Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified.
PARAMETER CONDITIONS MIN TYP MAX UNITS
INPUT
Voltage Range 4.75 5 5.25 VDC
10.8 12 13.2 VDC
13.5 15 16.5 VDC
21.6 24 26.5 VDC
43.2 48 52.8 VDC
ISOLATION
Rated Voltage 500 VDC
Test Voltage 60Hz, 10 Seconds 500 Vpk
Resistance 10 G
Capacitance 80 pF
Leakage Current VISO = 240VAC, 60Hz 10 18 µArms
OUTPUT
Rated Power 5W
Voltage Setpoint Accuracy Rated Load, Nominal VIN ±1 %
Temperature Coefficient ±0.02 %/°C
Ripple and Noise BW = DC to 10MHz 30 mVp-p
BW = DC to 2MHz 5 mV rm s
Tracking –VOUT Tracks +VOUT ±1 %
TRANSIENT RESPONSE
5V Output Models (Within ±1%) Rated Load to No Load 50 µs
No Load to Rated Load 10 0 µs
All Other Models (Within ±0.1%) Rated Load to No Load 30 µs
No Load to Rated Load 10 0 µs
REGULATION
Line Regulation High Line to Low Line ±0.02 %
Load Regulation Rated Load to No Load
5V Output Models ±0.04 %
All Other Models ±0.02 %
GENERAL
Switching Frequency 170 kHz
Package Weight 50 g
MTTF per MIL-HDBK-217, Rev. E*Circuit Stress Method
Ground Benign TA = +25°C 762,000 Hr
TA = +70°C 46,000 Hr
Fixed Ground TA = +35°C 230,000 Hr
Naval Sheltered TA = +35°C 127,000 Hr
Airborne Uninhabited Fighter TA = +35°C 29,000 Hr
TEMPERATURE
Specification 0 +25 +70 °C
Operation -25 +85 °C
Storage -40 +110 °C
PWR70XX 11/98 REV F Page 3
ABSOLUTE MAXIMUM RATINGS
Output Short-Circuit Duration ................................................... Continuous
Internal Power Dissipation.................................................................. 3. 5W
Lead Temperature (soldering, 10 seconds max) ............................ +300°C
ORDERING INFORMATION
PWR 70XX A /H
Device Family
PWR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
Package Option
A or C (see Mechanical section)
Screening Option
NOTES: All dimensions are in inches (millimeters).
GRID: 0.1 inches (2.54 millimeters).
* Common pin not present on single output models.
Marked with: specific model ordered, date code, job code.
PIN PLACEMENT TOLERANCE: ±0.015"
MATERIAL: Units are encapsulated in a low thermal resistance
molding compound which has excellent chemical resistance, wide
operating temperature range, and good electrical properties under high
humidity environments. The encapsulant and outer shell of the unit
have UL94V-0 ratings. Lead material is brass with a solder plated
surface to allow ease of solderability.
MECHANICAL
PWR70XX
PWR70XX 11/98 REV FPage 4
ENGINEERING NOTES
The inf ormation provided herein is believ ed to be reliable; howe ver, C&D TECHNOLOGIES assumes no responsibility f or inaccur acies or omissions. C&D TECHNOLOGIES assumes no responsibility f or
the use of this information, and all use of such information shall be entirely at the user's o wn risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the
circuits described herein are implied or granted to any third par ty. C&D TECHNOLOGIES does not authorize or warrant any C&D TECHNOLOGIES product for use in life suppor t devices/systems or
in aircraft control applications.