3
Engineered Adhesiv es Di vision
3M Center, Building 220-7E-01
St. Paul, MN 55144-1000 Printed in U.S .A.
©3M 2000 70-0705-7564-5 (8/01)
Recycled Paper
40% pr e-consumer
10% post-consumer
Scotch®ATG Ta pes
924 • 926 • 928 • 969 • 97 6 • 97 0 XL
A pplication Ideas
(continued) •Tapes 969 and 976
Tapes 969 and 976 are ideal for
bonding materials with glossy
coatings where an aggressi ve
adhesi v e with high initial adhesion is
desired. Some application ideas are:
• Folders and boxes
• Attach f abric sw atches in sample
books
• Assemble point-of-purchase
displays
•Tape 970XL
This adhesi v e is ideal for adhesion to many
paper materials but also w orks well on
many surf aces. Some application ideas are:
• Pressure-sensitive edges for posters and
point of purchase sales advertising.
• Mounting photos pre-press, prior to color
scanning in lithography (0.001 in. [0.025
mm] caliper helps reduce visibility).
• Mounting of novelty items, photographs,
note pads, etc.
MSDS: 3M has not prepared a MSDS for these products which are not subject to the MSDS requirements
of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions for
use, these products should not present a health and safety hazard. However, use or processing of the
products in a manner not in accordance with the directions for use may affect their performance and
present potential health and safety hazards.
TSCA: These products are defined as articles under the Toxic Substances Control Act and therefore, are
exempt from inventory listing requirements.
Certification/
Recognition
To request additional product information or to arrange for sales assistance , call toll free 1-800-362-3550
or visit www.3M.com/bonding. Address correspondence to: 3M Engineered Adhesives Division, 3M
Center, Building 220-7E-01, St. Paul, MN 55144-1000. Our fax number is 651-733-9175. In Canada,
phone: 1-800-364-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00.
F or Additional
Information
3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is
responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s
method of application. Please remember that many factors can aff ect the use and performance of a 3M
product in a particular application. The materials to be bonded with the product, the surf ace prepar ation
of those materials, the product selected for use, the conditions in which the product is used, and the time
and environmental conditions in which the product is expected to perform are among the many factors
that can affect the use and performance of a 3M product. Given the variety of factors that can affect the
use and performance of a 3M product, some of which are uniquely within the user’s knowledge and
control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular
purpose and suitable for the user’s method of application.
Important Notice
If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE TO
REFUND THE PURCHASE PRICE OF OR T O REPAIR OR REPLA CE THE DEFECTIVE 3M PRODUCT.
3M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or
consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence,
warranty, or strict liability.
Limitation of Remedies
and Liability
This Engineered Adhesives Division product w as man ufactured under a 3M quality system registered to ISO 9002 standards.
ISO 9002