MSDEU02-HI SERIES DC-DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package FEATURES Industrial SMD Package Ultra-high I/O Isolation 8000VDC with Reinforced Insulation, rate for 300Vrms Working Voltage Common Mode Transient Immunity:15KV/s Qualified for IGBT and High Isolation Applications Operating Ambient Temp. Range -25C to +80C Water-washable Process Available(option) Tape & Reel Package Available UL/cUL/IEC/EN 60950-1 Safety Approval PRODUCT OVERVIEW The MINMAX MSDEU02-HI series is a new range of isolated 2W DC-DC converter modules in SMD package which feature a Ultra-high I/O-isolation voltage rated for 8000VDC with reinforced insulation. A very high common mode transient immunity with 15KV/s qualifies these product for IGBT driver applications.There are 15 Models available for 5, 12, and 24VDC input. These converters offer a cost-effective solution for wind turbine, solar panel, transporation systems, industrial control equipments and some IGBT driver applications where a very high I/O-isolation is required. Model Selection Guide Model Number Input Voltage (Range) Output Voltage Max. Min. @Max. Load @No Load VDC VDC mA mA mA(typ.) mA(typ.) 5 400 8 615 12 165 3 609 15 133 2.5 605 12 83 1.5 553 10 15 66 1 542 10 MSDEU02-12S05HI 5 400 8 256 12 MSDEU02-12S12HI 12 165 3 254 10 15 133 2.5 252 12 83 1.5 224 10 MSDEU02-12D15HI 15 66 1 220 10 MSDEU02-24S05HI 5 400 8 128 12 MSDEU02-24S12HI 12 165 3 127 10 15 133 2.5 126 12 83 1.5 112 10 15 66 1 110 10 MSDEU02-05S05HI MSDEU02-05S12HI MSDEU02-05S15HI MSDEU02-05D12HI 5 (4.5 ~ 5.5) MSDEU02-05D15HI MSDEU02-12S15HI MSDEU02-12D12HI MSDEU02-24S15HI MSDEU02-24D12HI 12 (10.8 ~ 13.2) 24 (21.6 ~ 26.4) MSDEU02-24D15HI Output Current Input Current Load Regulation Max. capacitive Load % (max.) F Efficiency (typ.) @Max. Load 12 10 90 330 10 40 65 66 100# 72 73 65 330 10 30 % 65 65 66 100# 74 75 65 330 10 65 66 100# 74 75 # For each output Input Specifications Parameter Model Input Voltage Range Input Surge Voltage (1 sec. max.) Input Filter 2018/04/24 REV:5 Max. 5V Input Models 4.5 5 5.5 10.8 12 13.2 24V Input Models 21.6 24 26.4 5V Input Models -0.7 --- 9 12V Input Models -0.7 --- 18 24V Input Models -0.7 --- 30 Tel:886-6-2923150 Page 1 of 5 Typ. 12V Input Models All Models E-mail:sales@minmax.com.tw Min. Internal Capacitor Unit VDC MSDEU02-HI SERIES DC-DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package Output Specifications Parameter Output Voltage Setting Accuracy Output Voltage Balance Line Regulation Load Regulation Ripple & Noise Temperature Coefficient Short Circuit Protection Conditions Min. ------- Typ. Max. 2.0 4.0 Dual Output, Balanced Loads 0.1 1.0 Vin=Min. to Max. @Full Load 1.2 1.5 Io=20% to 100% See Model Selection Guide 0-20 MHz Bandwidth ----150 --0.01 0.02 0.5 Second Max., Automatic Recovery Unit %Vnom. % % mV P-P %/ Isolation, Safety Standards Parameter Conditions 60 Seconds Reinforced insulation, rated for 300Vrms working voltage Tested for 1 second I/O Isolation Voltage I/O Isolation Resistance I/O Isolation Capacitance Common Mode Transient Immunity Min. Typ. Max. Unit 4000 --- --- VACrms 8000 --- --- VDC 500 VDC 10 --- --- G 100KHz, 1V --15 15 --- 20 --- pF KV/s UL/cUL 60950-1 recognition(UL certificate), IEC/EN 60950-1(CB-report) Safety Approvals General Specifications Parameter Conditions Switching Frequency MTBF (calculated) MIL-HDBK-217F@25, Ground Benign Moisture Sensitivity Level (MSL) Min. Typ. Max. Unit 50 80 100 KHz 2,000,000 --- --- Hours IPC/JEDEC J-STD-020D.1 Level 2 Environmental Specifications Parameter Operating Ambient Temperature Range (See Power Derating Curve) Case Temperature Storage Temperature Range Humidity (non condensing) Cooling Conditions Min. Max. Unit Natural Convection -25 +80 ---50 --Natural Convection +90 +125 95 % rel. H Lead-free reflow solder process IPC/JEDEC J-STD-020D.1 Power Derating Curve 100 Natural convection 20LFM Output Power (%) 80 400LFM 60 40 20 0 ~ -25 0 20 40 60 Ambient Temperature C E-mail:sales@minmax.com.tw 2018/04/24 REV:5 Tel:886-6-2923150 Page 2 of 5 80 100 110 MSDEU02-HI SERIES DC-DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package Notes 1 2 3 4 5 6 7 Specifications typical at Ta=+25, resistive load, nominal input voltage and rated output current unless otherwise noted. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules; however they may not meet all specifications listed. We recommend to protect the converter by a slow blow fuse in the input supply line. Other input and output voltage may be available, please contact factory. That "natural convection" is about 20LFM but is not equal to still air (0 LFM). It is not recommended to use water-washing process on SMT units. Specifications are subject to change without notice. Package Specifications Mechanical Dimensions Connecting Pin Patterns 17.78 [0.70] 24.0 [0.94] 2.54 [0.1] 15.24 [0.6] 2.9 9.0 [0.35] 4.3 [0.17] 7 0 ~4 All dimensions in mm (inches) 8 Tolerance: X.X0.5 (X.XX0.02) Bottom View X.XX0.25 ( X.XXX0.01) 10 9 16 Pins 0.05 (0.002) Dual Output 1 -Vin -Vin 7 NC NC 8 NC Common 9 +Vout +Vout 10 -Vout -Vout +Vin NC: No Connection E-mail:sales@minmax.com.tw 2018/04/24 2.54 [0.10] 0.15 S Single Output 16 1.6 [0.06] SEATING PLANE 1.5 [ 0.06] 1 Pin Connections Pin 9.25 0.5 [0.36 0.02] 0.25 [0.01] 10.6 [0.42] S 19.5 [0.77] 8 1.00 [0.04] 13.7 [0.54] 7 1 [0.11] Top View 16.6 [0.65] 13.7 [0.54] 10 9 16 18.1 [0.71] 3.11 [0.12] REV:5 +Vin Tel:886-6-2923150 Page 3 of 5 Physical Characteristics Case Size : 24.0x13.7x9.0mm (0.94x0.54x0.35 inches) Case Material : Non-Conductive Black Plastic (flammability to UL 94V-0 rated) Pin Material : Phosphor bronze Weight : 3.75g MSDEU02-HI SERIES DC-DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package Order Code Table Standard For water-washable process MSDEU02-05S05HI MSDEU02-05S05HI-W MSDEU02-05S12HI MSDEU02-05S12HI-W MSDEU02-05S15HI MSDEU02-05S15HI-W MSDEU02-05D12HI MSDEU02-05D12HI-W MSDEU02-05D15HI MSDEU02-05D15HI-W MSDEU02-12S05HI MSDEU02-12S05HI-W MSDEU02-12S12HI MSDEU02-12S12HI-W MSDEU02-12S15HI MSDEU02-12S15HI-W MSDEU02-12D12HI MSDEU02-12D12HI-W MSDEU02-12D15HI MSDEU02-12D15HI-W MSDEU02-24S05HI MSDEU02-24S05HI-W MSDEU02-24S12HI MSDEU02-24S12HI-W MSDEU02-24S15HI MSDEU02-24S15HI-W MSDEU02-24D12HI MSDEU02-24D12HI-W MSDEU02-24D15HI MSDEU02-24D15HI-W E-mail:sales@minmax.com.tw 2018/04/24 REV:5 Tel:886-6-2923150 Page 4 of 5 MSDEU02-HI SERIES DC-DC CONVERTER 2W, Ultra-high I/O lsolation, SMD Package Test Setup Peak-to-Peak Output Noise Measurement Test Use a Cout 0.47F ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between 50 mm and 75 mm from the DC-DC Converter. +Vin +Out Copper Strip Single Output DC / DC Converter -Vin Cout -Out Scope Resistive Load Copper Strip +Vin +Out Copper Strip Dual Output DC / DC Converter Com. Copper Strip -Vin -Out Scope Cout Resistive Load Cout Scope Copper Strip Technical Notes Maximum Capacitive Load The MSDEU02-HI series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup time. For optimum performance we recommend 100F maximum capacitive load for dual outputs and 330F capacitive load for single outputs. The maximum capacitance can be found in the data sheet. Input Source Impedance The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < 1.0 at 100 KHz) capacitor of a 2.2F for the 5V input devices, a 1.0F for the 12V input devices and a 0.47F for the 24V input devices. + DC Power Source +Vin + +Out DC / DC Converter Load Cin - -Vin -Out Output Ripple Reduction A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is recommended to use 3.3F capacitors at the output. + +Vin DC Power Source - +Out Single Output DC / DC Converter -Vin + Cout Load -Out +Vin DC Power Source - +Out Dual Output DC / DC Com. Converter -Vin -Out Cout Load Load Cout Thermal Considerations Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept below 90. The derating curves are determined from measurements obtained in a test setup. Position of air velocity probe and thermocouple 15mm / 0.6in 50mm / 2in Air Flow DUT 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw Minmax Technology Co., Ltd. 2018/04/24 REV:5 Page 5 of 5