Agilent 34137A Test Lead Set Agilent 34137A Test Lead Set Operating Instructions Operating Instructions This Test Lead Set is designed for use only with the Agilent 3458A Multimeter. Do not use with other Agilent meters. This Test Lead Set is designed for use only with the Agilent 3458A Multimeter. Do not use with other Agilent meters. Assistance Assistance For technical assistance, contact your nearest Agilent Sales Office. Or visit the Agilent web site at www.agilent.com/find/assist for further information. For technical assistance, contact your nearest Agilent Sales Office. Or visit the Agilent web site at www.agilent.com/find/assist for further information. Agilent Technologies, Inc. 900 S. Taft Avenue Loveland, CO 80537 U.S.A. Agilent Technologies, Inc. 900 S. Taft Avenue Loveland, CO 80537 U.S.A. Symbols Symbols Refer to instrument manual for additional safety information. CAT II IEC Measurement Category II. Refer to instrument manual for additional information. Refer to instrument manual for additional safety information. CAT II IEC Measurement Category II. Refer to instrument manual for additional information. Ratings Quantity Ratings Quantity Test Lead - 1000V, 15A 2 pieces Test Lead - 1000V, 15A 2 pieces Fine Tip Probe Attachments - 300V, 3A 2 pieces Fine Tip Probe Attachments - 300V, 3A 2 pieces Mini Grabber Attachment - 300V, 3A 1 piece Mini Grabber Attachment - 300V, 3A 1 piece SMT Grabber Attachments - 300V, 3A 2 pieces SMT Grabber Attachments - 300V, 3A 2 pieces Operation Operation Refer to the multimeter user's guide for further information. Refer to the multimeter user's guide for further information. The Fine Tip, Mini Grabber, and SMT Grabber attachments plug onto the probe end of the Test Leads. The Fine Tip, Mini Grabber, and SMT Grabber attachments plug onto the probe end of the Test Leads. WARNING: If Test Lead Set is used in a manner not specified by Agilent Technologies, the protection provided by the Test Lead Set may be impaired. Instrument damage or personal injury may result. WARNING: If Test Lead Set is used in a manner not specified by Agilent Technologies, the protection provided by the Test Lead Set may be impaired. Instrument damage or personal injury may result. Maintenance Maintenance If any portion of the Test Lead Set is worn or damaged, do not use; replace with a new Test Lead Set. If any portion of the Test Lead Set is worn or damaged, do not use; replace with a new Test Lead Set. (c) Agilent Technologies, Inc. 2012 *34137-90000* *34137-90000* E1212 E1212 December 2012 34137-90000 34137-90000