JNPS-0814
i
目 次 ／ CONTENTS
頁 / PAGE
1. 機能 ·················································································································1
FUNCTION············································································································6
2. 適合対象 ·········································································································1
COMPATIBLE OBJECTS ·····················································································6
3. 関連仕様図 ·····································································································1
RELATED SPECIFICATION DRAWINGS ························································ 6
4. 関連規格類 ·····································································································1
RELATED TEST STANDARDS ········································································· 6
5. 適用 ·················································································································2
APPLICATION······································································································ 7
6. 品質特性 ·······································································································3
QUALITY PERFORMANCE·················································································8
7. 製品上めっき仕様識別表示 ·········································································· 5
PLATING SPEC INDICATION ON CONNECTOR············································10
8. 包装＆表示 ·····································································································5
PACKAGE & IDENTIFICATION ······································································· 10
9. 保管 ·················································································································5
STORAGE············································································································ 10
10. 注意事項 ·········································································································5
ATTENTIONS ····································································································· 10
JNPS-0814
６
1. FUNCTION
This connector is one of MDR board mount receptacle straight series. And mating side has 2 rows of
female contacts with the pitch of 1.27mm and contact tails are arranged in 1.27mm×1.905mm staggered
grid. This connector can be mounted on the compatible PC board and mating with MDR plug connector
enables to have the electrical performance.
This connector is grounded by screw lockdown.
2. COMPATIBLE OBJECTS
2-1 COMPATIBLE CONNECTORS
3M BRAND MDR PLUG : 101XX-XXXX XX
2-2 COMPAIBLE PC BOARDS
PCB with solder plating hole
See RELATED SPECIFICATION DRAWINGS recommended hole pattern.
4U-0010-0466-2
3. RELATED SPECIFICATION DRAWINGS
See the drawings described in JNPD-0814.
4. RELATED TEST STANDARDS
MIL-STD-202
JEIDA-38-1984
JIS C 0050
JNTM-0039, JNTM-0040
*JNTM: Test Method Standard of Sumitomo 3M for Electronic and Electrical Component Parts.
JNPS-0814
７
5. APPLICATION
PRODUCT NUMBER INFORMATION
PLATING THICKNESS SUFFIX
PL : under Nickel Plating
CONTACT AREA / Gold Plating 0.2 µm Min.
TAIL AREA / Gold Flash Plating
with Lubricant Treatment
PE : under Nickel Plating
CONTACT AREA / Gold Plating 0.5 µm Min.
TAIL AREA / Gold Flash Plating
PC : under Nickel Plating
CONTACT AREA / Gold Plating 0.76 µm Min.
TAIL AREA / Gold Flash Plating
RETENTION FEATURE
0 : Screw Lock (M2.6) for PC Board
1 : Screw Lock (M2.5) for PC Board
TYPE
2 : Standard Body
CONTACT QUANTITY
XX : XX Pos. (Exception: 100 pos. is shown "A0".)
PRODUCT SERIES NAME
102 : MDR Receptacle
SOLDER TAIL
2 : 3.4mm
PIN CONFIGURATIONS
6 : Board Mount Straight Type
102 XX – 6 2 X 2 PX
JNPS-0814
８
6. QUALITY PERFORMANCE
6-1 RATING
ITEM RATING
CURRENT
VOLTAGE
TEMPERATURE
0.5A Max.
AC: 150V Max. / DC: 200V Max.
-55°C ~ 85°C
6-2 PHYSICAL SPECIFICATIONS * The value in ( ) is reference.
TEST
DESCRIPTION REQUIREMENT TEST CONDITION
RELATED
STANDARD
CONTACT
RETENTION FORCE
7.85N (0.8 kgf) Min. Tensile speed 5mm / min.
――――
INSERTION &
WITHDRAWAL
FORCE
Insertion Force:
1.47N (150 gf) Max.
Withdrawal Force:
0.39N (40 gf) Min.
Tensile speed 5mm / min with
Compatible connector.
Spec. Value is estimated by one
contact pin.
――――
CONTACT
SOLDER ABILITY
Wetting: 95% Min.
or
Zero cross time:
3 seconds Max.
Solder: Sn-3Ag-0.5Cu
- Wetting Measurement:
245°C, 3 seconds
- Wetting Balance Method:
245°C
JNTM-0039
JIS C 0050
SOLDERING HEAT
RESISTANCE
Connector should not have
any defect portions after test.
Dip soldering:
260°C, 10 seconds, 2 times or
263°C, 5seconds, 2 times
* Pre-heat Condition:
Temp. of Components
100°C Max.
Duration 60 seconds Max.
Soldering iron:
390°C, 3 seconds, 2 times
JNTM-0040
JNPS-0814
９
6-3 ELECTRICAL SPECIFICATIONS
TEST
DESCRIPTION REQUIREMENT TEST CONDITION
RELATED
STANDARD
DIELECTRIC
WITHSTANDING
VOLTAGE
No appearance of arcing
and break down.
Leak current: 1mA Max.
Impressed voltage is AC 500V rms.
between adjacent two contacts for one
minute.
――――
INSULATION
RESIDENSE
500MΩ Min. Impressed voltage is DC 500V between
adjacent two contacts for one minute. ――――
DISCONTINUITY
Less than 1µs - Vibration test
* as the part of 3M SEQUENCE-II
- Mechanical sock test
See Table 1.
Initial /
for each plating spec.
35mΩ Max.
Contact resistance is measured
at Short Circuit.
Current: 1.5mA
Open Circuit Voltage: 20mV
by 4 terminal method.
* Measurement values include
the resistance of contact pins
as conductive material.
CONTACT
RESISTANCE
Change of contact
resistance after
evaluation tests/
for each plating spec.
± 25mΩ Max.
(1) PL Plating
3M SEQUENCE -I /
mating (30 cycles) Æ moisture
Æ salt spray
3M SEQUENCE -II /
thermal shock Æ humidity
Æ vibration
3M SEQUENCE -III /
thermal life
H2S GAS SEQUENCE /
mating (30 cycles)Æ H2S gas
DURABILITY /
300 cycles
MECHANICAL SHOCK /
(2) PE Plating and PC Plating
3M SEQUENCE -I /
mating (50 cycles) Æ moisture
Æ salt spray
3M SEQUENCE -II /
thermal shock Æ humidity
Æ vibration
3M SEQUENCE -III /
thermal life
H2S GAS SEQUENCE /
mating (50 cycles)Æ H2S gas
DURABILITY /
500 cycles
* NOTE: See Table 1.
for environmental tests.
See Table 1.
JNPS-0814
１０
Table 1: ENVIROMENTAL TEST
ITEM TEST CONDITION RELATED STANDARD
MOISTURE -10 ∼ 65°C, Relative Humidity 95% / 10 cycles MIL-STD-202F106D
SALT SPRAY NaCl 5% solution, 35°C / 48 hours MIL-STD-202F101D
THERMAL SHOCK -55°C→25°C→85°C→25°C / 5 cycles MIL-STD-202F107G
HUMIDITY
(STEADY STATE) 40°C, Relative Humidity 95% / 96 hours MIL-STD-202F103B
THERMAL LIFE Steady Current: Current Rating × 110%, 85°C / 1000 hours ――――
H2S GAS 3 ± 1 ppm, 40°C, Relative Humidity 70 ∼ 80% / 96 hours JEIDA-38-1984
VIBRATION
Sweep Freq.: 10 ∼ 55Hz, Amplitude: 1.52mm (or 98 m/s2)
Sweep Cycle: 1 min., Sweep time: 2 hours
Sweep Directions: X, Y, Z
MIL-STD-202F201A
MECHANICAL
SHOCK
490 m/s2, 11ms, Half sine shock pulse.
3 times / X,Y,Z directions (Total 9 times) MIL-STD-202E213B
7. PLATING SPEC INDICATION ON CONNECTOR
The first letter, in stamped 3 letters on the connector body for lot numbering, identified the following
plating specs.
R XX : PL plating
Z XX : PE plating
Y XX : PC plating
* XX : two alphabet letters
8. PACKAGE & IDENTIFICATION
These products are packed with plastic tray and carton box for transit.
Carton box is identified by part number, quantity, maker name and lot number.
9. STORAGE
This products shall be stored in a room, ambient temperature 5 ∼ 35°C, and ambient humidity
40 ∼ 70%.
