Amphenol
RJF Series
Awarded
“Component
product of the
year”
Electronica 2004
Reinforced Infocom Connectors for Harsh Environment
RJ45 Field - RJ11 Field - RJ Switch - USB Field - FireWire Field - LC Field - MTRJ field
Amphenol
FW Field (IEEE 1394)
MTRJ Field - LC Field
Self Closing Cap
(RJ 45/USB/IEEE 1394)
Rugged USB memory
key
RJF TVRJ Field
USB-A Field
RJF 544 RJF EZRJF RB (RJ Fast)
NEW
CAT6
RJ11 Field
NEW
RJ Switch
NEW
NEW
TABLE OF CONTENTS
Rugged RJ45 Solutions
RJFRB: plastic circular shell - reverse bayonet coupling, IDC & PCB Tail Receptacle......................................................................3
RJF544: plastic circular shell - push pull coupling ......................................................................................................................................6
RJFEZ: plastic rectangular shell - lever coupling .........................................................................................................................................8
RJF: metallic circular shell based on MIL-C-26482 - bayonet coupling.............................................................................................10
RJF - special receptacles: right angle, cable mount inline and PC tails receptacles.....................................................................13
RJFTV: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device ...........15
Self Closing Cap for square flange RJFTV receptacles.............................................................................................................................18
RJFTV - receptacles and plugs with 360° EMI backshells .......................................................................................................................19
RJFTV - special receptacles: right angle, through bulkhead and PC tails receptacles ................................................................21
RJF-RJFTV Sealed: transversally sealed RJF and RJFTV receptacles....................................................................................................24
High Reliability Cat5E cable and cordsets....................................................................................................................................................25
Rugged USB-A and USB-B solutions (USB2.0)
USBFTV: rugged USB-A - metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device.......26
USBFTV: special versions: receptacles with 360° EMI backshells - PC tails receptacles ..............................................................29
USBFTV memory key ...........................................................................................................................................................................................30
USBF memory key ...........................................................................................................................................................................................31
High Reliability USB2.0 cordsets......................................................................................................................................................................32
USBBF: rugged USB-B - plastic circular shell - thread coupling ...........................................................................................................33
Rugged IEEE1394 solutions
FWFTV: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device .........34
Rugged RJ45 / USB-A / IEEE1394 receptacles with self closing cap
Self Closing Cap ....................................................................................................................................................................................................37
Rugged RJ11/RJ12 solutions
RJ11F: metallic circular shell based on MIL-C-26482 - bayonet coupling........................................................................................38
Rugged MTRJ and LC (fiber optic) solutions
MTRJF: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device...........40
LCF: metallic circular shell based on MIL-DTL-38999 series III - thread coupling with anti-decoupling device ................42
Rugged Ethernet Switchs
5 or 9 ports IP30 Switch - Unmanaged, Ring or managed ...................................................................................................................44
5 ports IP67 Switch - Fiber glass reinforced Polyester enclosure - Unmanaged or Ring ...........................................................47
9 ports Switch IP67 - Aluminum enclosure with olive drab cadmium plating - Unmanaged or managed - Gigabit .............51
Factory
Automation
Wireless
Systems
Video
and CCTV
C4ISR
Military
Communications
Commercial
Avionics and Rail
Mass Transit
NEW
CAT6
NEW
APPLICATIONS
NEW
NEW
NEW
NEW
NEW
CONNECTORS
Series Industrial Ethernet
Specication Coupling Mechanism Shape Material Specication Prime Market Page
RJF RB Reverse Bayonet Circular Plastic N/A Industrial & Telecom 3
RJF544 IEC 60603-7 variant 12 Push Pull Circular Plastic N/A Industrial & Telecom 6
RJF EZ IEC 60603-7 variant 13 Lever Rectangular Plastic N/A Industrial & Telecom 8
RJF IEC 60603-7 variant 11 Bayonet Circular Metal MIL-C-26482 MIL/Aero & Industrial 10
RJF TV Thread Circular Metal MIL-DTL-38999
(Series III)
MIL/Aero &
Rail Mass Transit 15
USBFTV Thread Circular Metal MIL-DTL-38999
(Series III) Mil/Aero & Rail Mass Transit 26
Rugged
USB Key Circular Metal N/A MIL/Aero & Industrial 31
USBBF Thread Circular Plastic N/A Industrial & Telecom 33
FWFTV Thread Circular Metal MIL-DTL-38999
(Series III) Mil/Aero & Video 34
Self Closing
Cap
Bayonet (for RJ45)
N/A
(for USB-A and IEEE1394)
Circular Metal N/A Industrial & Telecom 37
RJ11F Bayonet Circular Metal MIL-C-26482 MIL/Aero & Industrial 38
MTRJFTV Thread Circular Metal MIL-DTL-38999
(Series III) Mil/Aero & Rail Mass Transit 40
LC/LX5F Thread Circular Metal MIL-DTL-38999
(Series III) Mil/Aero & Rail Mass Transit 42
EXAMPLE FOR RJ 45 CORDSET
The Amphenol Field Series
allows you to transform a
standard infocom cordset into
a rugged waterproof connector
for harsh environments.
RJ eld allows you to use
Ethernet Class D / Cat. 5e
connections for 10 BaseT,
v 100 BaseTX or 1000 Base T
networks in extreme
environments.
- A full range of versions
depending upon the application
- No cabling operation nor
measurement required after
installation
- Sealing: IP67 (1 meter immersion
for up to 30 minutes)
- Shock, vibration and traction
resistant
- Inline extension
- Mechanical coding/polarization
- EMI protection
RJFIELD CONCEPT
RJ stop ® patent
No
Tool
No
Cabling
www.rjeld.com
RJFIELD SELECTION GUIDE
1
RJFIELD SELECTION GUIDE
ETHERNET
SWITCHES
Series Sealing Material Number
of ports Unmanaged Ring Managed Prime
Market Page
RJS IP30 Metal &
Plastic 5 or 9 x x x
Factory
Automation /
Video
44
RJSPC IP67 Plastic 5 x x Factory
Automation 47
RJSML IP67 Metal 9 x x x MIL/Aero 51
RJFIELD SELECTION GUIDE
CABLE & CORDSET
Reels Cordsets Prime Market Page
(without RJ45)
100 m (around 238 ft)
300 m (around 984 ft)
(with RJ45 overmolded at each end)
Available lengths see page 25 Mil/Aero & Rail Mass Transit 25
Available in Cordset Available Lenght see page 32 Mil/Aero / Rail Mass Transit
& Industrial 32
NEW
2
RJF RB Ethernet Connection System for Harsh Environment – Industrial Ethernet
Data Transmission
10 BaseT, 100 BaseTX and 1000 BaseT networks
Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801
Cat6 per TIA/EIA 568B and ClassE per ISO/IEC 11801
MAIN CHARACTERISTICS
nSealed against fluids and dust (IP67)
nShock, Vibration and Traction resistant
nNo cabling operation in field, no tools required
nReverse bayonet coupling
nRJ45 cordset retention in the plug: 70 N in the axis
nMating cycles: 500 min
Part Number Code
Series
RJF RB
RJF RB 7 1RA
Shell Type
6: Composite reverse bayonet Plug, Plastic Gland
7: Composite jam nut Receptacle
Back Terminations (For Receptacles only)
1: Female RJ45
1RA: Right angle female RJ45
2: RJ45 Cordset
3U: IDC cat6 - unshielded
3F: IDC cat6 - partial shielding
3S: IDC cat6 - 100% shielded
Cordset Length (For Receptacles with “2” back termination only)
03: 0.3m [11.81 inches]
05: 0.5m [19.68 inches]
10: 1m [39.37 inches]
15: 1.5m [59.05 inches]
Cabling Configuration (For “7” Receptacles and with type "2" back termination only)
100BTX: (=568B)
568A
Examples: - Plug: RJF RB 6
- Receptacle, female RJ45 Back termination: RJF RB 71
- Receptacle, right angle female RJ45 Back termination: RJF RB 71RA
- Receptacle, 1,5m [59.05”] RJ45 cordset termination: RJF RB 72 15 100BTX
RJFRB allows you to use an Ethernet Class D / Cat. 5e and Class E/Cat 6 con-
nection for 10 BaseT,100 BaseTX or 1000 BaseT networks in harsh environ-
ments.
With the patented RJStop® system you can use a standard RJ45 cordset in a
protective composite plug which will protect it from shocks, dust and fluids.
No hazardous on-field cabling and grounding!
Environmental Protection
nSealing: IP67
nSalt Spray > 1000 h
nFire Retardant / Low Smoke: UL94 V0 and NFF 16102, DIN 5510-2
nThermal Shock: 5 cycles at - 40°C / +100°C
nOperating Temperature: - 40°C / +85°C
Applications
nTelecom Equipments
nVideo Control
nRobotics
n Industrial Process Control
nCNC Machines
nSpecial Machines
nMotion Control
NEW
CAT6
RJF RB
NEW
PCB
IDC Receptacle PCB Receptacle
3
Plug
nType 6 Shell with Plastic Gland
Receptacle
nType 1: Female RJ45
(front mounting)
nType 1RA: Right Angle Female RJ45
(front mounting)
nType 2: RJ45 Cordset
(front mounting)
nType 3: IDC Cat6 termination
(rear mounting)
RJF RB 6
RJF RB 71
RJFRB71RA
RJFRB72XX 100BTX (XX=03, 05, 10 or 15 - see part number code page 3)
Unshielded: RJFRB73U
Partial shielding RJFRB73F
Shielded: RJFRB73S
Panel Drilling
4
4
2
3
3
n IP67 Dust Caps
Accessories
nStraight PCB termination receptacle:
(rear mounting)
Part number: RJF RB 75
RJF RB C7
Cap for receptacles RJFRB71 / 71RA / 72xxx
RJF RB C75
Cap for receptacles RJFRB75 and RJFRB73x
Assembly Instructions
IMPORTANT NOTE
The customer's PCB
design will determine the
receptacle category.
PCB Drilling RJFRB
Panel Drilling
1 2 3
4 5 6
7 8
5
RJF 544 Ethernet Connection System for Harsh Environment – Industrial Ethernet
Part Number Code
Series
RJField 544 - Push Pull
RJF 544 2 2 03 100 BTX
Shell Type
6: Composite Push Pull Plug, Plastic Gland
2: Composite Square Flange Receptacle
2M: Metallized (Ni) Composite Square Flange Receptacle
Back Terminations (For Receptacles only)
1: Female RJ45
2: RJ45 Cordset
Cordset Length (For Receptacles with “2” Back Termination only)
03: 0.3 meters [11.81 inches]
05: 0.5 meters [19.68 inches]
10: 1 meter [39.37 inches]
15: 1.5 meters [59.05 inches]
00: 8 tinned holes at the rear of the PCB to solder the cable
Cabling Configuration (For “2” Receptacles only)
100BTX: (=568B)
568A
Examples: - Plug: RJF 544 6
- Square flange receptacle, Female RJ45 Back termination: RJF 544 21
- Metallized Square flange receptacle, Female RJ45 Back termination: RJF 544 2M 1
- Square flange receptacle, 1,5m [59.05”] 100 BTX cordset termination: RJF 544 22 15 100BTX
- Square flange receptacle, solder termination: RJF 544 22 00
Applications
nTelecom Equipment
n Video Control
n Robotics
n Industrial Process Control
nCNC Machines
n Special Machines
n Motion Control
n Tele-maintenance
RJF544 allows you to use an Ethernet Class D / Cat. 5e connection for 10
BaseT,100 BaseTX or 1000 BaseT networks in harsh environments:
With the patented RJStop® system you can use a standard RJ45 cordset in a
protective composite plug which will protect it from shocks, dust and fluids.
No hazardous on-field cabling and grounding!
MAIN CHARACTERISTICS
nCompliant with IEC 60603-7 variant 12
nShock, Vibration and Traction resistant
n No cabling operation in field and no tools required
nSealed against fluids and dust (IP67)
nQuick Push Pull coupling
n RJ45 cordset retention in the plug: 100 N in the axis
n Mating cycles: 500 min
nImproved EMI Protection
Data Transmission
10 BaseT, 100 BaseTX and 1000 BaseT networks
Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801
Environmental Protection
nSealing: IP67
n Salt Spray > 1000 h
n Fire Retardant / Low Smoke: UL94 V0 and NFF 16102, DIN 5510-2
n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s.
n Thermal Shock: 5 cycles at - 40°C / +100°C
n Operating Temperature: - 40°C / +85°C
RJF 544
6
Type 1: Female RJ45 Type 2: RJ45 Cordset Type 2 - 00: Solder – 8 tinned holes
Plug
nType 6 Shell with Plastic Gland
RJF 544 6
Receptacle
nType 2 Shell: Square flange receptacle with 4 mounting holes
RJF 544 2
Back Terminations
Notes: - Type 2 without RJ45 plug at the end of the cable are also available: consult factory - Type 1 also availble with 90° female RJ45
nPanel Gasket (Thickness: 1 mm [.039]): Part No. 544 02 JE
nPlug Insert removal tool: Part No. 5440 OT 02
Accessories
n IP67 Caps
7
RJF EZ Ethernet Connection System for Harsh Environment – Industrial Ethernet
Environmental Protection
nSealing: IP67
nSalt Spray > 1000 h
nFire Retardant / Low Smoke: UL94 V0 and NFF 16102, DIN 5510-2
nThermal Shock: 5 cycles at - 40°C / +100°C
nOperating Temperature: - 40°C / +85°C
Part Number Code
Series
RJField EZ - Lever
RJF EZ 2 2 03 100 BTX
Shell Type
6: Composite Lever Plug, Plastic Gland
2: Composite Square Flange Receptacle
Back Terminations (For Receptacles only)
1: Female RJ45
2: RJ45 Cordset
Cordset Length (For Receptacles with “2” Back Termination only)
03: 0.3m [11.81 inches]
05: 0.5m [19.68 inches]
10: 1m [39.37 inches]
15: 1.5m [59.05 inches]
Cabling Configuration (For “2” Receptacles only)
100BTX: (=568B)
568A
Examples: - Plug: RJF EZ 6
- Receptacle, Female RJ45 Back termination: RJF EZ 21
- Receptacle, 1,5m [59.05”] 100 BTX cordset termination: RJF EZ 22 15 100BTX
Data Transmission
10 BaseT, 100 BaseTX and 1000 BaseT networks
Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801
MAIN CHARACTERISTICS
nCompliant with IEC 60603-7 variant 13
nSealed against fluids and dust (IP67)
nShock, Vibration and Traction resistant
nNo cabling operation in field and no tools required
nQuick lever coupling
nRJ45 cordset retention in the plug: 70 N in the axis
nMating cycles: 500 min
RJFEZ allows you to use an Ethernet Class D / Cat. 5e connection for 10
BaseT,100 BaseTX or 1000 BaseT networks in harsh environments.
With the patented RJStop® system you can use a standard RJ45 cordset in a
protective composite plug which will protect it from shocks, dust and fluids.
No hazardous on-field cabling and grounding!
Applications
nTelecom Equipment
nVideo Control
nRobotics
nIndustrial Process Control
nCNC Machines
nSpecial Machines
nMotion Control
nTele-maintenance
RJF EZ
8
Notes: Type 2 without RJ45 plug at the end of the cable are also available: consult factory
Type 1: Female RJ45 Type 2: RJ45 Cordset
Back Terminations
Plug
RJF EZ 2
Receptacle
nIP67 Dust Caps
For Plugs: Not available
For Receptacles: RJF EZ BE
n Panel Gasket
Thickness: 1 mm [.039]
Part No. RJF EZ JE
RJF EZ 6
Accessories
Assembly Instructions
9
RJF Ethernet Connection System for Harsh Environment – Industrial Ethernet
Data Transmission
10 BaseT, 100 BaseTX and 1000 BaseT networks
Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801
Environmental Protection
nSealing: IP67
n Salt Spray: 48 h with Nickel plating
> 96 h with black coating
> 500 h with Oliv Drab Cadmium
n Fire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102
n Vibrations: 10 – 500 Hz, 10 g, 3 axes: no
discontinuity > 10 nano s.
nShocks: IK06: weight of 250 g drop from 40
cm [15.75 in] onto connectors (mated pair)
n Humidity: 21 days, 43°C, 98% humidity
n Thermal Shock: 5 cycles at - 40°C / +100°C
n Temperature Range: - 40°C / +85°C
Part Number Code
Series
RJField
RJF 2 2 B 03 100 BTX
Shell Type
6: Plug, Plastic Gland
6M: Plug, Metal Gland
2: Square Flange Receptacle
2PE: IP67 In line square flange Receptacle
2PEM: IP67 In line square flange Receptacle, Metal Gland
7: Jam Nut Receptacle
7PE: IP67 In line Jam Nut Receptacle
7PEM: IP67 In line Jam Nut Receptacle, Metal Gland
Back Terminations (For Receptacles only)
1: Female RJ45
2: RJ45 Cordset
Shell Finishes
B: Black Coating - ROHS compliant
N: Nickel (Note: with this version, the inserts are metallized) - ROHS compliant
G: Olive Drab Cadmium (Note: with this version, the inserts are metallized)
Cordset Length (For Receptacles with “2” Back Termination only)
03: 0.3m [11.81 inches]
05: 0.5m [19.68 inches]
10: 1m [39.37 inches]
15: 1.5m [59.05 inches]
00: 8 tinned holes at the rear of the PCB to solder the cable
Cabling Configuration (For “2” Receptacles only)
100BTX: (=568B)
568A
Examples: - Nickel plug: RJF 6 N
- Black square flange receptacle, female RJ45 back termination: RJF 2 1 B
- Olive drab cadmium jam nut receptacle, 1.5m [59.05”] 100 BTX cordset termination: RJF 7 2 G 15 100BTX
- Black in line square flange receptacle, 30cm [11.81”] 100BTX cordset termination: RJF 2PE 2 B 03 100BTX
- Nickel jam nut receptacle, solder termination: RJF 72 N 00
Applications
nRobotics
n Industrial Process Control
n CNC Machines
n Special Machines
n Oil & Gas
nMotion Control
nData Acquisition and
Transmission in Harsh
Environment
n Tele-maintenance
RJF allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT,100
BaseTX or 1000 BaseT networks in harsh environments:
With the patented RJStop®system you can use a standard RJ45 cordset in a
metallic plug which will protect it from shocks, dust and fluids.
No hazardous on-field cabling and grounding!
nCompliant with IEC 60603-7 variant 11
nBayonet coupling (“Audible & Visual” coupling signal )
nRobust metallic shells based on MIL-C-26482
n RJ45 cordset retention in the plug: 100 N in the axis
n Mating cycles: 500 min
n Sealed against fluids and dust (IP67)
n Shock, Vibration and Traction resistant
n No cabling operation in field and no tools required
n Mechanical Coding / Polarization (4 positions)
MAIN CHARACTERISTICS
“N”: nickel plating
“B”: black coating
RJF
10
Plug:
nShell type 6 With Plastic or Metal Gland
Receptacles:
n Square flange receptacle
4 mounting holes: Shell type 2
nJam nut receptacle
Hexagonal Nut mounting:
Shell type 7
nIP67 In line receptacles:
Shell type 2PE and 7PE with Plastic or Metal Gland
82 [3.23] Fully Assembled
Type 1: Female RJ45 Type 2: RJ45 Cordset Type 2 - 00: Solder - 8 tinned holes
Notes: • Type 2 without RJ45 plug at the end of the cable are also available: consult factory • Type 1 also available with 90° female RJ45
RJF 6
RJF 2
RJF 7
RJF 2PE/2PEM
Back Terminations:
RJF 7PE/7PEM
11
RJ45 PLUG
HALF INSULATOR
RJ STOP®
Patent
HALF INSULATOR
STOPPER
STOPPER
AUDIBLE
LOCKING
1
1
2
1
2
Assembly instructions
1. Push down the RJ45 cordset latch, and fix it inside the insert
2. Press in and click the other part of the insert
3. Insert in the metallic housing
RJFC 2 B
Connector Type
6: Plug
2: Square Flange Receptacle
7: Jam Nut Receptacle
Finishes
B: Black Coating - ROHS compliant
N: Nickel - ROHS compliant
G: Olive Drab Cadmium
nMetallic cap
Accessories:
n Panel gasket for
square flange « 2 »thickness:
0,6 mm – P/N: JE 18
n Insert removal tool for
receptacle and plug
P/N = RJF ODE
Universal: Can be used with all standard * RJ45 Cat.5e cordset brands
Easy and Safe: No field cabling tools required
12
RJF Special receptacles: Right angle, cable mount inline & PC tails
Square Flange Receptacle - 4 mounting holes - Right Angle – 4 clocking positions:
Some applications have minimal space inside the system. The right angle recep-
tacles meet this need while keeping the advantage of connecting a standard RJ45
cordset at the back.
Jam Nut Receptacle – Hexagonal nut mounting - Right Angle – 4 clocking positions:
PART NUMBERS:
Black coating: RJF21RAB
Nickel plating: RJF21RAN
Olive Drab Cadmium plating: RJF21RAG
PART NUMBERS:
Black coating: RJF71RAB
Nickel plating: RJF71RAN
Olive Drab Cadmium plating: RJF71RAG
Inline receptacles allow you to make cable extensions in the field by using them
with rugged RJFied series plugs.
Metallic Gland
Black coating: RJF2PEWFM1B
Nickel plating: RJF21PEWFM1N
Olive Drab Cadmium plating: RJF2PEWFM1G
PART NUMBERS:
Plastic Gland
Black coating: RJF2PEWF1B
Nickel plating: RJF2PEWF1N
Olive Drab Cadmium plating: RJF2PEWF1G
RJF Special Receptacles
“N”: nickel plating
“B”: black coating
Right Angle Receptacles
Inline Cable Mount Receptacles
13
These receptacles can be soldered directly on your PCB. A compound insures a
transversal sealing and good performance in high vibration environments. They can
be connected with rugged RJField series plugs.
PART NUMBERS:
Note:
1. Platings available:
"B": black coating
"N": nickel plating
"B": olive drab cadmium plating
2. As these receptacles are compounded, coding position has to be chosen before ordering
Examples:
Square flange receptacle – black coating – coding A: RJF2SA5B
Square flange receptacle – nickel plating – coding C: RJF2SC5N
Square flange receptacle – olive drab cadmium plating – coding D: RJF2SD5G
PCB LAYOUT – SOLDER FACE VIEW PANEL DRILLING
In some applications, a transversal sealing for the receptacle is a « must ». This
will prevent fluids and dust from going through the receptacle when plug or cap
are not mated to the receptacle. The sealed solution (version “S”) has a compound
at the rear of the receptacle as shown on the picture. For more information, please
consult datasheet RJF-RJFTV Environmentally Sealed Receptacles, page 23.
“N”: nickel plating
“B”: black coating
PCB Tails Receptacles
Environmentally Sealed Receptacles
14
RJF TV Ethernet Connection System for Harsh Environment
Part Number Code
Series
RJ Field TV
RJF TV 2 2 G 03 100 BTX
Shell Type
6: Plug with Plastic gland
6M: Plug with Metal gland
2: Square Flange Receptacle
2PE: Square Flange Rec. with IP67 backshell
2PEM: Square Flange Rec, IP67 back, metal gland
7: Jam Nut Receptacle
7PE: Jam Nut Rec. With IP67 backshell
7PEM: Jam Nut Rec., IP67 back., metal gland
2SA, 7SA: Compounded versions: see page 23
Back Terminations (Receptacles only)
1: Female RJ45
2: RJ45 Cordset
Shells material & Finish
N: Aluminium shell - nickel plating (receptacle inserts are metallized) - ROHS compliant
G: Aluminium shell - olive drab cadmium plating (receptacle inserts are metallized)
BZ: Marine bronze shell (receptacle inserts are metallized) - ROHS compliant
Cordset Length (type 2 back termination only)
03: 0.3m [11.81 inches]
05: 0.5m 19.68 inches]
10: 1m [39.37 inches]
15: 1.5m [59.05 inches]
00: 8 tinned holes at the rear of the PCB to solder the cable
Cabling Configuration (for Type “”2”” receptacles only)
100BTX: (=568B)
568A
Examples: - Olive Drab Cadmium plug with plastic gland: RJF TV 6G
- Olive Drab Cadmium Jam Nut Receptacle, female RJ45 back termination: RJF TV 71G
- Nickel Jam Nut Receptacle, 1,5 m 100 BTX cordset back termination: RJF TV 72N 15 100BTX
- Olive Drab Cadmium in line Square Flange Recept., 0,3 m 100 BTX cordset back termination: RJF TV 2PE 2 G 03 100BTX
- Nickel Jam Nut Receptacle Solder termination 8 tinned holes: RJF TV 22 N 00
RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT,
100 BaseTx or 1000 BaseT networks in harsh environments.
With the patented RJStop system you can use a standard RJ45 cordset in a
metallic plug which will protect it from shocks, dust and fluids.
No hazardous on-field cabling and grounding!
MAIN CHARACTERISTICS
nSealed against fluids and dusts (IP67)
nShock, Vibration and Traction resistant
nNo cabling operation in field and no tools required
nMechanical Coding / Polarization (4 positions)
nImproved EMI protection
n Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type)
with anti-decoupling device
nRobust metallic shells
nRJ45 cordset retention in the plug: 100 N in the axis
nMating cycles: 500 min
Environmental Protection
nSealing: IP67
nSalt Spray: 48 h with Aluminium shell - Nickel plating
> 500 h with Aluminium shell - Olive Dran Cadmium plating
1000h with Marine bronze shell
nFire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102
nVibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s.
nCompounded versions tested per NAS 1599 (5-3000 Hz, 20g, 12h)
nShocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair)
nHumidity: 21 days, 43°C, 98% humidity
nThermal Shock: 5 cycles at - 40°C / +100°C
nTemperature Range: - 40°C / +85°C
Data Transmission
10 BaseT, 100 BaseTX and 1000 BaseT networks
Cat 5e per TIA/EIA 568B and ClassD per ISO/IEC 11801
Applications
nData Acquisition and Transmission in harsh
environment
nRailways
nRadars
nShelters
nBattlefield Communication
nSystems
nNavy
“N”: nickel plating
“BZ”: marine bronze
RJF TV
15
Notes Type 2 without RJ45 plug at the end of the cable are also available: consult factory
Plug
n « 6 » Shell With plastic or metal gland
Receptacles
n« 2 » Shell Square Flange
n« 7 » Shell Jam Nut
n « 2PE » and « 7PE » Shells
IP67 In-line receptacle
With plastic or Metal gland
92 [3.622]
Type 1: Female RJ45 Type 2: RJ45 Cordset Type 2 - 00: Solder – 8 tinned holes
RJF TV 6
RJF TV 2
RJF TV 7
Back Terminations
RJF TV 2PE/2PEM/7PE/7PEM
Panel Drilling
16
CODE A
CODE B
CODE C
CODE D
Plug Receptacle
Main Key
RJFTVC 2 G
Connector Type
6: Plug
2: Square Flange Receptacle
7: Jam Nut Receptacle
Shell Material & finish
N: Aluminium shell - nickel plating - ROHS compliant
G: Aluminium shell - olive drab cadmium plating
BZ: Marine bronze shell - ROHS compliant
Plug Cap Receptacle Cap
nMetallic Caps
Accessories
Assembly instructions
CONNECTION SIDE VIEW
Insert Codings
n Panel Gasket for square flange
receptacle
(Thickness: 0,8 mm [.031]): JE19
n Insert removal tool: RJF ODE
CODE A
CODE B
CODE C
CODE D
Receptacle
y
* CLIC * !
* CLIC * !
17
RJF TV SELF CLOSING CAP (SCC SERIES)
This Self Closing cap automatically protects the RJF TV square flange receptacle (MIL-DTL-3899 type), protecting your system
from dust and water projection. A spring automatically closes the upper part of the cap when the RJF TV plug is removed
from the receptacle.
n Panel Gasket for square flange receptacle
(Thickness: 0,8 mm [.031]):
PART NUMBER: JE19
RJFTV SCC Series
PART NUMBER:
Self closing cap only: RJFTVSCC
Remark: Compatible only with RJFTV
square flange receptacle type: RJFTV2XXX
(see page 15)
18
RJFTV Receptacles - Plugs with 360° EMI backshells
RJFTV series receptacles and plugs with EMI backshells provide a solution with 360°
shielding: same protection than the one proposed per standard MIL-DTL-38999
serie III connectors. With those solutions we recommend using our reinforced and
double shielded cat5E cable, see page 24.
PART NUMBERS:
Olive Drab Cadmium Plating: Kit38082
Nickel Plating: Kit38082NI
SQUARE FLANGE RECEPTACLE
Kit38082 and Kit38082NI include:
JAM NUT RECEPTACLE
PART NUMBERS:
Olive Drab Cadmium Plating: Kit38204
Nickel Plating: Kit38204NI
Kit38204 and Kit38204NI include:
RJFTV - 360° shielded
19
IMPORTANT NOTE
With these receptacles, customer will have to solder his cable
on the PCB. So the wire positions have to be defined per the
customer according to his network.
Kit38081 and Kit38081NI include:
PLUGS
PART NUMBERS:
Olive Drab Cadmium Plating: Kit38081
Nickel Plating: Kit38081NI
IMPORTANT NOTE
With these plugs, the standard RJ45 plug is not provided.
Customer will have to crimp a standard RJ45 on the cable by
himself.
We advise using our double Shielded, reinforced Cat5E cable
(see page 24) with these RJFTV series EMI connectors.If customer
wants to use his own cable, please check with us regarding
compatibility with our backshells: contact@rjfield.com.
We also provide assembled cordsets, (see examples below).
For this type of solution please provide the configuration needed:
length, description of second end…
Grounding Ring
Grounding
Ring
20
RJFTV Right angle – Through Bulkhead – PC Tails Receptacles
Some applications have minimal space inside the system. The right angle recep-
tacles meet this need while keeping the advantage of connecting a standard RJ45
cordset at the back.
SQUARE FLANGE RECEPTACLE
PART NUMBERS:
Nickel plating: RJFTV71RAN
Olive Drab Cadmium plating: RJFTV71RAG
PART NUMBERS:
Nickel plating: RJFTV21RAN
Olive Drab Cadmium plating: RJFTV21RAG
PANEL DRILLING
PANEL DRILLING
JAM NUT RECEPTACLE
“N”: nickel plating
RJFTV - Special receptacles
Right Angle Receptacles
21
Our RJFTV through bulkhead receptacles can be connected on each side with
rugged RJFTV plugs. This system allows mechanical protection and a sealing (IP67)
inside and outside the equipement, and keeps the flexibility offered by panel
mount and plug connectors.
PART NUMBERS:
Nickel plating – Non metallized inserts: RJFTVB2N ISO BRUT
Nickel plating – Metallized inserts: RJFTVB2N ISO NI
In some applications, a transversal sealing for the receptacle is a « must ». This will
prevent fluids and dust from going through the receptacle when plug or cap are
not mated to the receptacle. The sealed solution (version “S”) has a compound at the
rear of the receptacle as shown on the example. In addition, the Sealed RJF TV have
been successfully tested in very high vibration corresponding to airplanes applica-
tions. For more information, please consult datasheet RJF-RJFTV Environmentally
Sealed Receptacles (see page 23).
RJF TV 7SA2 G 05 100BTX
These receptacles can be soldered directly to your PCB. A compound insures a
transversal sealing and good performance in high-vibration environments. The
shell of those receptacles are in the « Stand Off » style. They can be connected with
RJFTV series plugs.
SQUARE FLANGE RECEPTACLE
Olive Drab Cadmium plating – Non metallized inserts: RJFTVB2G ISO BRUT
Olive Drab Cadmium plating – Metallized inserts: RJFTVB2G ISO NI
PART NUMBERS:
Olive Drab Cadmium Plating: RJFTV25GF459
Nickel Plating: RJFTV25NF459
Through Bulkhead Receptacles
Environmentally Sealed Receptacles
PCB Tails receptacles
“N”: nickel plating
22
3.24
PANEL DRILLING
PCB LAYOUT
Solder view face
JAM NUT RECEPTACLE
PART NUMBERS:
Olive Drab Cadmium Plating: RJFTV75RGF459
Nickel Plating: RJFTV75RNF459
PANEL DRILLING
PCB LAYOUT
Solder view face
23
RJF/RJF TV Environmentaly Sealed Receptacles
Part Number Code
Series
RJF: MIL-C-26482 bayonet
RJFTV: MIL-C-38999 series III
RJF TV 7S A 2 G 03 100 BTX
Shell Type
2S: Sealed Square Flange Receptacle
7S: Sealed Jam Nut Receptacle
Coding
A,B,C,D
Back Terminations (For Receptacles only)
1: Female RJ45
2: RJ45 Cordset
Shell material & Finish
B: Aluminium shell - black coating - ROHS compliant (available for RJF Series Only)
N: Aluminium shell - nickel plating - ROHS compliant (note: receptacle inserts are metallized)
G: Aluminium shell - olive drab cadmium plating (note: receptacle inserts are metallized)
BZ: Marine bronze shell (receptacle inserts are metallized) - ROHS compliant (only available for RJFTV)
Cordset Length (For Receptacles with “2” Back Termination only)
03: 0.3m [11.81 inches]
05: 0.5m [19.68 inches]
10: 1m [39.37 inches]
15: 1.5m [59.05 inches]
Cabling Configuration (For “2” Receptacles only)
100BTX: (=568B)
568A
Examples: - Bayonet, A coding, Olive Drab Cadmium Jam Nut sealed receptacle with female RJ45 Back termination: RJF 7SA 1 G
- Bayonet, A coding, Black square flange sealed receptacle, Female RJ45 Back termination: RJF 2SA 1 B
- Series III, A coding, Olive Drab Cadmium Jam Nut sealed receptacle, 1.5m [59.05”] 100 BTX cordset: RJF TV 7SA 2 G15 100BTX
Data Transmission
10 BaseT, 100 BaseTX and 1000 BaseT networks
Cat 5e per TIA/EIA 568B and ClassD
per ISO/IEC 11801
Applications
nOutdoor Equipment
nAirplanes Equipment
nTactical Radios
nShelters
nRugged computers
n Data Acquisition and Transmission in
Harsh Environments
SEALED RECEPTACLE In some applications, a transversal sealing for the receptacle is a
« must ». This will prevent fluids and dust from going through the receptacle when plug or
cap are not mated to the receptacle. The sealed solution (version "S") has a compound at
the rear of the receptacle as shown on the examples below. This feature is available both in
RJF and RJF TV shells (please consult the relevant data sheet for product details and acces-
sories). In addition, the Sealed RJF TV have been successfully tested in very high vibration
corresponding to airplane applications.
RJFTV 7S A 2G 15 100BTX
CODE A
CODE B
CODE C
CODE D
Plug Receptacle
Main Key
MAIN CHARACTERISTICS
n Same as the RJF and RJF TV series … a
complete IP67 sealing of the receptacle
(even with no plug or no protective cap
mated) is added. IP 67 means immersion
during 30 minutes under 1 meter of water
(watertight).
n Outside dimensions are the same as the
standard RJF and RJF TV series.
n Vibrations: The compounded versions
of the RJF TV have been tested in vibra-
tion following the NAS 1599 Aeronautic
specification (Ambient temperature):
5 - 3000 Hz, 20g, 2,5 mm [.1 inch]
double amplitude, 3 axes, 12 hours
Note: This specification exceeds
MIL-C-26500 requirements.
“N”: nickel plating
“B”: black coating
“BZ”: marine bronze (only for RJFTV)
IMPORTANT NOTE
Due to the compound, the coding of
the connector must be done in the
factory: use the codes A, B, C or D in
the Part Number.
RJF/RJF TV
24
CABLE CAT 5E High Reliability Cat 5e Ethernet Cable & Cordsets
General Construction:A 4 pair, 24 AWG, 100 Ohm SFTP round patch cable, designed
to the ISO / IEC 11801 Category 5e requirements (cat 5e on 76m). The cable con-
tains 4 twisted pairs, cabled, double shielded with kevlar reinforcement strands,
jacketed in black UV resistant Polyurethane HFFR. Designed for fixed or portable
applications in harsh environments.
HFFR: Halogen Free Flame Retardant
Jacket Compound Specification:
Halogen Free Flame Retardant Polyether-based Polyurethane. Glossy finish.
Excellent hydrolysis resistance. High microbial resistance. UV resistant.
High flexibility.
Applications
nRobotics
nMotion Control
nRailways
nCNC Machines
nBattelfield communication
nIndustrial Process Control
PHYSICAL CHARACTERISTICS
CONDUCTORS 24 AWG (0,25 mm) tinned
copper, 7x0.20 mm
INSULATION Color coded 568-B, Linear Low
Density Polyethylene,
Nom. Dia. 0,039” (1mm)
ASSEMBLY Pairs cabled with Kevlar strength
members and separation tape
wrapped
SHIELDS Inner: Aluminium mylar
100% coverage
Outer: Tinned copper braid
80% coverage
JACKET Black, special PUR compound
WEIGHT 40 Lbs / mft (59 KG/Km)
OUTSIDE DIAM. 0.28” (7.1 mm) nom.
MIN BEND RADIUS
(During installation)
67.5mm (9x O. D.)
MIN BEND RADIUS
(During operation)
37.5mm (5 x O.D.)
MIN FLEXES TO FAILURE Passes IEC 61156-6 requirtements
TEMPERATURE Plus 70°C, minus 25°C
Cordsets with a RJ45 plug overmolded on each end
Length (m/ft) Part Number
0,76 m / 2,5 ft RJF SFTP 5E 0076
1,52 m / 5 ft RJF SFTP 5E 0152
3,05 m / 10 ft RJF SFTP 5E 0305
4,57 m / 15 ft RJF SFTP 5E 0457
6,24 m / 20,46 ft RJF SFTP 5E 0624
7,62 m / 25 ft RJF SFTP 5E 0762
9,37 m / 30,72 ft RJF SFTP 5E 0937
10,00 m / 32,78 ft RJF SFTP 5E 1000
15,25 m / 50 ft RJF SFTP 5E 1525
22,87 m / 75 ft RJF SFTP 5E 2287
30,5 m / 100 ft RJF SFTP 5E 3050
45,75 m / 150 ft RJF SFTP 5E 4575
ELECTRICAL CHARACTERISTICS
DC Resistance 96 Ohms/Km @ 20° C
Impedance 100 +/- 15 Ohms 1-100 MHz
Attenuation
772 KHz 2.70 db/100m nom.
1 MHz 3.15 db/100m nom.
4 MHz 6.45 db/100m nom.
10 MHz 9.90 db/100m nom.
16 MHz 12.3 db/100m nom.
20 MHz 13.8 db/100m nom.
31.25 MHz 17.7 db/100m nom.
62.5 MHz 25.6 db/100m nom.
100 MHz 33 db/100m nom.
N.E.X.T. (Near-End Crosstalk Loss)
772 KHz 64 db min.
1 MHz 62 db min.
4 MHz 53 db min.
10 MHz 47 db min.
16 MHz 44 db min.
20 MHz 42 db min.
31.25 MHz 40 db min.
62.5 MHz 35 db min.
100 MHz 32 db min.
Capacitance 46pF / m nom. @ 1KHz
LCL 43 dB min. @ 64 KHz
Capacitance Unbalance 3.4 pF / m max. @ 1KHz
(wire to ground)
Insulation Resistance 150 M Ohm min.
Voltage Rating 230 VMS
Dielectric Strength VAC/1 min - 700 V/Min
Propagation Delay (100 MHz) 5.2 ns/m max. @ 100 MHz
Delay Skew 20 ns/100m max. @ 1-100 MHz
Resistance Unbalance 3% max. @ 20° C
Structural Return Loss (100 MHz) 23db/100m min. @ 1-20 MHz
Spark test (tested during production) 3 KV
Velocity of propagation 67% nom.
Reel of cable
(without RJ45 plug on ends)
Length (m / ft) Part Number
100 m / ~328 ft 190-038045-00
300 m / ~984 ft 190-038045-01
Reinforced CAT 5E Cable
25
Data Transmission
USB Specification 2.0
Data Rate: Up to 480 Mb/s for High Speed USB
Environmental Protection
nSealing (when mated): IP67 (Temporary immersion)
nSalt Spray: 48 h with Nickel plating
> 500 h with Olive Drab Cadmium
1000 h with marine bronze shell
nFire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102
nVibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s
nShocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair)
nHumidity: 21 days, 43°C, 98% humidity
nTemperature Range: - 55°C / +85°C
Series
USB Field TV
USBF TV 2 1 G
Shell Type
6: Plug
2: Square Flange Receptacle
2PE: Square Flange Receptacle with backshell
7: Jam Nut Receptacle
7PE: Jam Nut Receptacle with backshell
Back Terminations (Receptacles only)
1: USB-A receptacle
2: Solder (4 tinned holes)
Shells Material & Finish
N: Aluminium shell - Nickel plating - ROHS compliant
G: Aluminium shell - Olive Drab Cadmium plating
BZ: Marine bronze shell - ROHS compliant
Examples: - Olive Drab Cadmium Plug: USBF TV 6G
- Olive Drab Cadmium Square Flange Receptacle, USB-A back terminat°: USBF TV 21G
- Olive Drab Cadmium Jam Nut Receptacle, USB-A receptacle back terminat°: USBF TV 71G
- Nickel Jam Nut Receptacle, solder termination: USBF TV 72N
Applications
nEmbedded Computers
n Data Acquisition and transmission in harsh
environment
nRailways
nBattelfield Communication Systems
nNavy Systems
USBF TV USB Connection System for Harsh Environment
With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug
which will protect it from shocks, dust and fluids.
No hazardous on-field cabling and grounding!
This metallic plug is connected into a receptacle, using a Tri Start Thread cou-
pling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device
for high vibrations.
MAIN CHARACTERISTICS
nSealed against fluids and dusts (IP67)
nShock, Vibration and Traction resistant
nNo cabling operation in field and no tools required
nMechanical Coding / Polarization (2 positions)
nImproved EMI protection
nTri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decou-
pling device
n2 mechanical Coding / Polarization possibilities by the user (receptacle insert rotation)
nUSBF TV plug retention in the receptacle: 100 N in the axis
nMating cycles: 500 to 1500
Part Number Code
“N”: nickel plating
“BZ”: marine bronze
USBF TV
26
Plug
Receptacles
n « 2 » Shell Square Flange
n « 7 » Shell Jam Nut
n « 2PE » and « 7PE » Shells
86.9 [3.422]
Backshell used with back termination type 1:
USB A receptacle (Not sealed)
Backshell used with
back termination type 2:
Solder (Sealed – IP67)
72.7 [2.862]
Type 1: USB-A Receptacle Type 2: Solder
4 Tined holes to solder your cable
View of the PCB of the
Type 2 version with 4 tined
holes for solder termination
USBF TV 6
USBF TV 2
USBF TV 7
Back Terminations
USBF TV 2PE/7PE-1 USBF TV 2PE/7PE-2
27
Can be used with most the USB cordset brands: No tools required!
Plug Assembly
1. Only if you need a full sealing (IP67): Install the white sticker around the
plug, covering the 4 little holes of the overmolding
2. Insert the black O Ring around the front face of the USB A plug. This O
Ring will ensure connection sealing
3. Insert the USB cordset into the metallic backshell
4. Insert the retention spacer laterally to the cable (this spacer is soft, in
order to adapt to different shapes of overmolding) and slide the over-
molding of the USB-A plug into this retention spacer
5. Insert the friction ring laterally to the cable
6. Choose the right coding (2 positions) and insert the USB-A plug into the
protective plug. Note at this step, the main key is used for polarization.
7. Screw the backshell on the plug body. A wrench can be necessary to
fully tighten it, and the connection to the receptacle can help
Receptacle Assembly
Insert the USB module from the rear. Reference is main key.
Beware to have a coding compatible with the coding you used for
the plug: on front view, the white shapes in the USBs
must be on the same side.
To remove the USB module, insert
the removal tool USBF ODE from the
Front, and push back the module.
nMetallic Caps
USBF TVC 2 G
Connector Type
6: Plug
2: Square Flange Receptacle
7: Jam Nut Receptacle
Shells Material & Finish
N: Aluminium shell - Nickel - ROHS compliant
G: Aluminium shell - Olive Drab Cadmium
BZ: Marine bronze shell - ROHS compliant
nPanel Gasket for square
flange receptacle
(Thickness: 0,8 mm [.031]): JE15
1 2
3 4
5 6
Accessories
Assembly Instructions
7a 7b
IMPORTANT NOTE
The connection sealing is not done
by the black retention spacer (which
is sloted), but by the front face ORing
(see 2)
n Receptacle Insert removal tool: USBF ODE
28
4 HOLES M3
THRU ALL
33.9
USBFTV Receptacles with 360° EMI backshells & PC Tails receptacles
USBFTV Receptacles series with EMI backshells provide 360° shielding: same
protection than the one proposed per Standard MIL-DTL-38999 serie III
Connectors. We offer these EMI backshells with square flange and jam nut
receptacles. The available platings are nickel or olive drab cadmium.
With those solutions we suggest using our reinforced USB cable
(shielded – zero halogen jacket). See page 31
We can provide those receptacles: • with cordset already soldered
• without cordset
For 360° shielded USBFTV series receptacles, please consult us:
www.usbfield.com
IMPORTANT NOTE
With receptacles provided without
cable, customer will have to solder
his cable on the PCB, please find
below the cabling specification.
If customer prefers to use his cable,
please check with us compatibility
with our EMI backshells:
www.usbfield.com
RECEPTACLES WITH
360° EMI BACKSHELLS
EXAMPLE WITH A SQUARE FLANGE RECEPTACLE PROVIDED WITHOUT CABLE
PC TAILS RECEPTACLE WITH « STAND OFF » SHELL
Those receptacles can be soldered directly on your PCB. A compound insures a transversal sealing and good performance in high-vibration
environments. The shell of these receptacles are in the « Stand Off » style. They can be connected with rugged USBFTV series plugs.
PART NUMBERS:
Jam nut receptacle – Nickel: USBFTV75NF459
Square flange receptacle – Olive Drab Cadmium: USBFTV75GF459
Panel Drilling
“N”: nickel plating
USBF TV - specials
29
Dimensions of rugged USBFTV Key shown with receptacle USBFTV21x
DEFINITION OF PART NUMBER
Beginning of every
USBFTV
Key part number.
Remains unchanged.
Plating:
"N": nickel plating
"G": olive drab cadmium
NB: please check the plating
of your USBFTV receptacle
Coding position:
A: coding A
B: coding B
NB: please check the
coding of your
USBFTV receptacle*
Capacity of your USBFTV Key:
0256
0512
1024
Other capacity, please consult us
at contact@rjfield.com
* The coding can be changed on the receptacle using our tool USBFODE
EXAMPLE: USBFTVKEY6A0256N: USBFTV KEY  CODING A  CAPACITY OF 256MO  NICKEL PLATING
EXAMPLE: USBFTVKEY6A1024GCAP: USBFTV KEY  CODING A  CAPACITY OF 1024MO  OLIVE DRAB CADMIUM PLATING  PROTECTIVE CAP
USBFTV KEY 6 A 0256 N CAP
Cap: With cap
Blank: Without
cap
REINFORCED USBFTV MEMORY KEYS
USBFTV - memory keys
We provide reinforced USB memory
keys available in different capaci-
ties. They can be used ONLY with
our USBFTV series receptacles. When
mated on the receptacle, the system
is IP67.
“N”: nickel plating
“B”: black coating
USB cordset is included with
each memory key
30
Dimensions of rugged USBF Key:
DEFINITION OF PART NUMBER
Beginning of every
USB Key part number.
Remains unchanged.
Shell finish:
N: Natural
G: Green
B: Black
Capacity of your USBF Key:
0256
0512
1024
Other capacity, please consult us
at contact@rjfield.com
EXAMPLE: USBFKEY0256N: USB MEMORY KEY  CAPACITY OF 256MO  SHELL FINISH : NATURAL
EXAMPLE: USBFKEY1024G: USB MEMORY KEY  CAPACITY OF 1024MO  SHELL FINISH : GREEN
USBF KEY 0256 N
Rugged Metallic USB KEY
with CAP SEALING : IP 67
REINFORCED USB MEMORY KEYS
We provide reinforced USB memory
keys available in different capaci-
ties. When mated, the system is IP67.
Shells are metallic with 1/4 turn bayo-
net coupling.
USB cordset is included with
each memory key
USB Memory keys
31
High Reliability USB 2.0 Cordsets
General Construction :this is a USB-2.0 cable containing one 28 AWG 90Ω
characteristic impedance data pair, two 24 AWG power conductors, overall
SFTP shields (SFTP = double shielding, Braid and foild), jacketed in black UV
resistant Polyurethane HFFR*. Designed for fixed or portable applications in
industrial and harsh environments.*HFFR : Halogen Free Flame Retardant.
Jacket Compound Specification:
Halogen Free Flame Retardant Polyether-based Polyurethane. Glossy finish.
Excellent hydrolysis resistance. High microbial resistance. UV resistant. High
flexibility.
Applications
n Robotics
n Motion Control
n Railways
n CNC Machines
n Battelfield communication
n Industrial Process
PHYSICAL CHARACTERISTICS
DATA CONDUCTORS bare copper, 7/0.12 mm nom
(28 AWG)
DATA INSULATION 0.9 mm nom
COLOR DATA PAIR Green & white
POWER CONDUCTORS Tinned copper, 7/0.2 mm (24 AWG)
POWER INSULATION 1.1 mm nom
COLOR POWER WIRE Red & Black
SHIELDS Foil: poviding 100% coverage, in contact
with tinned copper drain wire and an
overall braid providing 65% nom. cover-
age made of 16x5/0.1 mm tinned copper
strands
JACKET PU compound
COLOR JACKET Black
WEIGHT 38 KG/Km
OUTSIDE DIAM. 0.20 inch (5.1 mm nom. +/- 0.15)
MIN BEND RADIUS
(During installation)
45.9 mm ( 9x O. D.)
MIN BEND RADIUS
(During operation)
25.5mm ( 5 x O.D.)
TEMPERATURE installation Plus 60°C, minus 5°C
TEMPERATURE operational Plus 70°C, minus 30°C
ELECTRICAL CHARACTERISTICS
DC RESISTANCE 94 Ohms/Km @ 20° C
IMPEDANCE 90 +/- 13 Ohms 1-400 MHz
ATTENUATION
1 KHZ 8 db/100m max.
4 MHZ 15,6 db/100m max.
24 MHZ 38 db/100m max.
96 MHZ 76 db/100m max.
200 MHZ 128 db/100m max.
400 MHZ 232 db/100m max.
CAPACITANCE 2X28 AWG 54pF / m nom. @ 1KHz
CAPACITANCE
UNBALANCE
2.0 pF / m max. @ 1KHz
(wire to ground)
DIELECTRIC STRENGTH VAC/1 min - 500 V/Min
RESISTANCE UNBALANCE 2% max. @ 20° C
VELOCITY OF PROPAGA-
TION
65% min. 68% max.
CORDSETS WITH A USB A PLUG OVERMOLDED
ON EACH END (OUT OF USB SPECIFICATION > 5 M)
Length (m/ft) Part Number
6 m / 19,68 ft USB2 AA 600 PU HFFR
7 m / 22.96 ft USB2 AA 700 PU HFFR
8 m / 26.24 ft USB2 AA 800 PU HFFR
9 m / 29.52 ft USB2 AA 900 PU HFFR
10 m / 32.80 ft USB2 AA 1000 PU HFFR
CORDSETS WITH A USB A PLUG OVERMOLDED
ON EACH END UNDER USB SPECIFATION ≤ 5M
Length (m/ft) Part Number
0.5 m / 1,64 ft USB2 AA 050 PU HFFR
1 m / 3.28 ft USB2 AA 100 PU HFFR
1.50 m / 4.92 ft USB2 AA 150 PU HFFR
2 m / 6.56 ft USB2 AA 200 PU HFFR
2.50 m / 8.2 ft USB2 AA 250 PU HFFR
3 m / 9.84 ft USB2 AA 300 PU HFFR
3.50 m / 11.48 ft USB2 AA 350 PU HFFR
4 m / 13.12 ft USB2 AA 400 PU HFFR
4.5 m / 14.76 ft USB2 AA 450 PU HFFR
5 m / 16.40 ft USB2 AA 500 PU HFFR
USB 2.0 Cordsets
32
USBB Field
USB B Field
SEALED IP67 USBB CONNECTION SYSTEM
• USB-B male plug overmolded on USB2.0 cable
• USB-A plug can be used with USBFTV
• USB-B female receptacle with 50 mm wires & 5 way connectors
• Plastic shells
• Thread coupling
• Rear mount Jam Nut receptacle with panel gasket included
FEMALE RECEPTACLE AND CAPMALE SEALED PLUG USB-B / USB-A CORDSET
Applications
PLUG CORDSET – MALE SEALED USB-B / MALE USB-A *
USB 2.0 cable – PVC jacket
PART NUMBERS:
L = 1000±50mm [39.37±1.97] - P/N: USBBF6100
L = 2000±50mm [78.74±1.97] - P/N: USBBF6200
PIN ASSIGNMENTS FRONT VIEW
1 = RED (AWG 24)
2 = WHITE (AWG 28)
3 = GREEN (AWG 28)
4 = BLACK (AWG 24)
Shield = Drain
(*) To get a sealed USB-A plug, you can use our USB FTV series.
RECEPTACLE – FEMALE USB-B
JWT CONNECTOR – PITCH 2.5MM
JWT 1 = USB1 = RED (AWG 24)
JWT 2 = USB2 = WHITE (AWG 28)
JWT 3 = USB3 = GREEN (AWG 28)
JWT 4 = USB4 = BLACK (AWG 24)
JWT 5 = USB Shield = YELLOW (AWG 24)
RECEPTACLE CAP
CAP PN: USBBFC7
n Embedded Computers n Data Transfer n Numerical Control Machine
RECEPTACLE PN:
USBBF7
33
Environmental Protection
nSealing (mated): IP67 (Temporary immersion - 1 meter up to 30 minutes)
nSalt Spray: 48 hr with Nickel plating
500 hr with Olive Drab Cadmium
nFire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102
nVibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s
nShocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair)
nHumidity: 21 days, 43°C, 98% humidity
nTemperature Range: - 55°C / +85°C
Part Number Code
Series
IEEE1394 Field TV
FW F TV 2 1 G
Shell Type
6: Plug
2: Square Flange Receptacle
2PE: Square Flange Receptacle with backshell
7: Jam Nut Receptacle
7PE: Jam Nut Receptacle with backshell
Back Terminations (Receptacles only)
1: IEEE 1394 receptacle
2: Solder Board (6 tinned holes)
Shell Plating
N: Nickel - ROHS Compliant
G: Olive Drab Cadmium
Examples: - Olive Drab Cadmium Plug: FWF TV 6G
- Olive Drab Cadmium Square Flange Receptacle, IEEE 1394 front & back: FWF TV 21G
- Olive Drab Cadmium Jam Nut Receptacle, IEEE 1394 front and back: FWF TV 71G
- Nickel Jam Nut Receptacle, solder board termination: FWF TV 72N
FWF TV IEEE 1394 Connection System for Harsh Environments
Data Transmission
IEEE 1394a-2000
400 Mbits/second over 4.5 meters
With FW Field, you can insert a standard IEEE1394 cordset into a metallic plug
which will protect it from shocks, dust and fluids.
No hazardous on-field cabling and grounding!
This metallic plug is connected into a receptacle, using a Tri Start Thread cou-
pling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device
for high vibrations.
MAIN CHARACTERISTICS
n No assembly tools required
n Sealed against fluids and dusts (IP67)
nNo time-consuming in-field cabling operation necessary
nTri-start thread coupling mechanism (MIL-DTL-38999 series III type)
with anti-decoupling device
nFW plug retention in the receptacle: 100 N in the axis
nMating cycles: 500 to 1500 times
nImproved EMI protection
Applications
nEmbedded Computers
nVideo
n Railways
n Battelfield Communication Systems
n Naval & Shipboard Systems
n Robotics & Automation
n Process Control
n Rugged Communications
“N”: nickel plating
FWFTV
34
Plug
Receptacles
n « 2 » Shell Square Flange
n« 7 » Shell Jam Nut
n« 2PE » and « 7PE » Shells
86.9[3.422] 77[3.020]
Backshell used with IEEE 1394
Receptacle with back-termination - (Type 1)
Non sealed version
Backshell used with PCB
Receptacle back- termination - (Type 2)
Sealed version – IP67
Type 2 : Solder 6 Tined holes for soldering
T
ype 1 : IEEE 1394 Receptacle
Back Terminations
View of the PCB Type 2
version - with 6 tinned holes
for solder termination
FWF TV 6
FWF TV 2
FWF TV 7
35
Can be used with most IEEE 1394 cordset brands: No tools required!
Plug Assembly
1. If a fully sealed (IP67) assembly is required: Install the white tape
around the plug to cover the 4 holes of the overmolding. If there are
no holes omit this step.
2. Insert the black O Ring around the front face of the IEEE 1394 plug.
This O Ring will ensure the seal.
3. Insert the IEEE 1394 cordset into the metallic backshell.
4. Insert the retention spacer laterally onto the cable (this spacer is soft
so as to adapt to various overmolding styles) and slide the IEEE 1394
plug into this retention spacer.
5. Insert the friction ring laterally onto the cable cordset.
6. Insert the IEEE 1394 plug into the metallic circular shell. Note at this
step that the main key is used for polarization.
7. Screw the backshell on the plug body. A spanner may be required to
fully close the backshell to the circular shell.
Important Note: The sealing of the connector is not done by the
black retention spacers which are slotted, but rather by the front face
O-Ring (Fig 2).
Receptacle Assembly
To Solder your cable onto the PCB:
1. Attach the 2 metallized plastic inserts around the PCB (Fig 1a & 1b).
2. Insert the IEEE 1394 module from the rear of the connector.
Removing Modules
1. Insert the removal tool FWF ODE
from the front
2. Push the module back with thumb.
FWF TVC 2 G
Connector Type
6: Plug
2: Square Flange Receptacle
7: Jam Nut Receptacle
Shell plating
N: Nickel - ROHS Compliant
G: Olive Drab Cadmium
nPanel Gasket for square flange receptacle
(Thickness: 0,8 mm [.031]): JE15
nReceptacle Insert removal tool: FWF ODE
1 2
65
43
2
1
2
1a
1b
Accessories
nMetallic Caps
Assembly Instructions
7a 7b
36
Version: RJ45
RJF 21N SCC
Nickel and metallized
inserts (EMI)
RJF 21B SCC
Black and blank insert
Version: USB
USBF 21N SCC
Nickel and metallized
inserts (EMI)
USBF 21B SCC
Black and blank insert
Version: IEEE1394
FWF 21N SCC
Nickel and metallized
inserts (EMI)
FWF 21B SCC
Black and blank insert
[1.052]
SELF CLOSING CAP For RJ Field, USB and IEEE1394 receptacles
This Self Closing Cap automatically protects the RJ Field square flange receptacles (MIL-C-26482 type), protecting your
system from dust and water projections. The same cap can be used to protect USB and IEEE1394 receptacles. A spring
automatically closes the upper part of the cap when either the RJ Field plug, RJ45 cordset, USB or IEEE1394 cordset, or
USB key are removed from the receptacle.
n Note: Panel gasket for square
flange receptacles: JE18
36
[1.417]
26.7
[1.052]
64.1
[2.523]
26.97
[1.062]
26.1
[1.028]
21.9
[.862]
“N”: nickel plating
“B”: black coating
Self Closing Cap
37
Environmental Protection
nSealing: IP67
nSalt Spray: 48 h with Nickel plating
> 96 h with black coating
> 500 h with Oliv Drab Cadmium
nFire Retardant / Low Smoke: UL94 V0 and NF F 16 101 & 16 102
nVibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 10 nano s.
nShocks: IK06: weight of 250 g drop from 40 cm [15.75 in] onto connectors (mated pair)
nHumidity: 21 days, 43°C, 98% humidity
nThermal Shock: 5 cycles at - 40°C / +100°C
nTemperature Range: - 40°C / +85°C
Part Number Code
Series
RJ11Field
RJ11F 2 2 B
Shell Type
6: Plug, Plastic Gland
2: Square Flange Receptacle
7: Jam Nut Receptacle
Back Terminations (For Receptacles only)
1: Female RJ11
2: Solder (6 tinned holes)
Shell Finishes
B: Black Coating - ROHS Compliant
N: Nickel - ROHS Compliant
G: Olive Drab Cadmium
Examples: - Black Plug: RJ11F 6 B
- Black square flange receptacle, Female RJ11 Back termination: RJ11F 2 1 B
- Nickel Jam Nut Receptacle, solder termination: RJ11F 72 N
RJ11F Rugged RJ11/RJ12 Connection System for Harsh Environment
MAIN CHARACTERISTICS
nBayonet coupling (“Audible & Visual” coupling signal )
nRobust metallic shells based on MIL-C-26482
n4 mechanical user-defined coding / Polarization settings (insert rotation)
nRJ11 cordset retention in the plug: 100 N in the axis
nMating cycles: 500 min
Applications
nIndustrial applications
nBattlefield communication
nMetallic cap
RJ11FC 2 B
Connector Type
6: Plug
2: Square Flange Receptacle
7: Jam Nut Receptacle
Finishes
B: Black Coating - ROHS Compliant
N: Nickel - ROHS Compliant
G: Olive Drab Cadmium
n Panel gasket for square flange « 2 »
thickness: 0,6 mm P/N: JE 14
n Insert removal tool
for receptacle and plug
P/N = RJ11F ODE
Accessories
RJ11Field allows you to use a standard phone RJ11 / RJ12 connection in
harsh environments. With the patented RJStop® system you can use a stan-
dard RJ11 / RJ12 cordset in a metallic plug which will protect it from shocks,
dust and fluids. No hazardous on-field cabling!
NEW
“N”: nickel plating
“B”: black coating
RJ11 F
38
T
ype 1: Female RJ11 / RJ12 Type 2: Solder
6 tined through holes to solder your cable
Plug
n Shell type 6 with Plastic Gland
Receptacles
nSquare flange receptacle
4 mounting holes Shell type 2
nJam nut receptacleHexagonal Nut mounting-
Shell type 7
Back Terminations
Easy and Safe: No field cabling tools required
1. Pass the RJ11 / RJ12 plug « A » through the plastic gland « B »
2. Lateraly slide the insert « C » on the cable
3. Fix the RJ11 / RJ12 plug « A » in the insert « C », pushing on the lever
4. Insert in the metallic housing « D »
5. Tighten the plastic gland « B »
4 coding positions
RJ11F 6
RJ11F 2
RJ11F 7
Assembly instructions
39
Part Number Code
Serie
MTRJ Field TV
MTRJF TV 6M C G N
Shell Type
6: Plug with metal backshell, plastic PG clamp
6M: Plug with metal backshell and metal PG clamp
2: Square flange receptacle
2PE: Square flange, metal backshell and plastic PG clamp
2PEM: Square flange, metal backshell and metal PG clamp
7: Jam nut receptacle
7PE: Jam nut, metal backshell and plastic PG clamp
7PEM: Jam nut, metal backshell and metal PG clamp
Cable Type
C: Mini round cable 2,8 mm
D: Flat duplex cable 1,6 mm
S: Duplex zipcord 1,6 mm
0: Receptacle without backshell
T: Flat duplex cable + Duplex zipcord for 1,6 mm - 2mm - 2,8mm
Shell Finish
N: Nickel plated
G: Olive drab cadmium plated
B: Bronze
D: Black zinc cobalt
Z: Olive drab zinc cobalt
Polarization
N: Normal
A/B/C/D/E
Cap Series B EC N TV W 13
Protective cap type
EC: For square flange receptacle
ER: For jam nut receptacle
F: For plug
Wire type
N: Nylon cord
Blank: Metallic chain
TV: Series
Shell finish
B: Bronze
F: Electroless nickel plated, aluminium version
W: Olive drab cadmium plated, aluminium version
D: Black zinc cobalt
Z: Olive drab zinc cobalt
MTRJF TV Transform your MTRJ patchcord into an Environmental Connector
MECHANICAL CHARACTERISTICS
nNumber of Channels: 1/2/4
nTypical Insertion Loss: 0,5db in MM
nDurability: 500 mating/unmating cycles (changes for<0,2 db)
Applications
nRailways
nBase Station
nMilitary communication
nNavy
With MTRJFTV you can use a standard MTRJ patchcord in a metallic plug
which will protect it from shocks, dust and fluids.
No hazardous on-field cabling!
The MTRJ Field offers an easy system to upgrade from a standard to an envi-
ronmental MTRJ.
• Sealed against fluids and dust (IP67)
• Shock, Vibration proof,
• No cabling operation in field and no tools required for installation
nRequested information to order MTRJ Field Patchcord
Plug MTRJ: Male /Female
Type of fiber: 50/125, 62,5/125, 9/125
Patchcord length: ex 10.5m
Drawing: description of the product
Contact us for other configuration
Dismounting Tool Ordering Information
MTRJFTV DM TOOL
“N”: nickel plating
MTRJF TV
40
Line drawings (Dimensions in mm)
n Plug (MIL DTL 38 999 series III Size 13)
n Receptacle (MIL DTL 38 999 series III Size 13) with backshell
n Square Flange Receptacle (MIL DTL 38 999 series III Size 13)
n Jam Nut Receptacle (MIL DTL 38 999 series III Size 13)
Protective caps
29 Max
96 Max
2.31 MAX
V
9.37 MAX
Size 13/25
= 22.30
Panel Thickness
1.57 MIN, 3.18 MAX
0.875 (inches)
24.26
30.17
34.93
25.58
38.38
25.58
36.00
24.26
MTRJ FTV 6
MTRJ FTV 2PE/2PEM
MTRJ FTV 7PE/7PEM
MTRJ FTV 2
MTRJ FTV 7
Square flange receptacle with backshell Jam Nut receptacle with backshell
PANEL DRILLING
Square flange receptacle rear
panel mounting
Square flange receptacle
front panel mounting
PANEL DRILLING
Jam nut receptacle
rear panel mounting
Protective cap for
plug (nylon cord)
Protective cap for
receptacles (nylon cord)
41
LC/LX5F Transform your LC/LX5 patchcord into an Environmental Connector
MECHANICAL CHARACTERISTICS
nNumber of Channels: 2
nTypical Insertion Loss: 0,5db in MM and SM
nDurability 500 mating/unmating cycles (changes for<0,2 db)
Applications
nRailways
nBase Station
nMilitary communication
nNavy
The LC Field and LX5 Field offers an easy system to upgrade from a standard to an environmental LC or LX5.
• Sealed against fluids and dust (IP67)
• Shock, Vibration proof
• No cabling operation in field and no tools required for installation (except 1,6mm and 2mm zipcord cable)
With the patented RJStop ® system you can use a standard LC or LX5 patchcord in a metallic plug which will protect it from
shocks, dust and fluids. No hazardous on-field cabling!
Part Number Code
Serie
Optical connector type
LCF: LC Field TV
LX5F: LX5 Field TV
XXXX TV XX X X X
Shell Type
6M: Plug with metal backshell and metal PG clamp
2: Square flange receptacle without backshell
7: Jam nut receptacle without backshell
Cable Type
D: Flat duplex cable 1,6 mm
E: Duplex zipcord 1,6 mm
F: Flat duplex cable 2 mm
G: Duplex zipcord 2 mm
H: Flat duplex cable 2,8 mm
I: Duplex zipcord 2,8 mm
0: Receptacle without backshell
T: Flat duplex cable + Duplex zipcord for 1,6 mm - 2mm - 2,8mm
Shell Finish
N: Nickel plated
G: Olive drab cadmium plated
B: Bronze
D: Black zinc cobalt
Z: Olive drab zinc cobalt
Polarization
N: Normal
A / B / C / D / E
Cap Series B EC N TV W 19
Protective cap type
EC: For square flange receptacle
ER: For jam nut receptacle
F: For plug
Wire type
N: Nylon cord
Blank: Metallic chain
TV: Series
Shell finish
B: Bronze
F: Electroless nickel plated, aluminium version
W: Olive drab cadmium plated, aluminium version
D: Black zinc cobalt
Z: Olive drab zinc cobalt
Corresponding connector shell size: 19
nRequested information to order LC/LX5 Field Patchcord
Type of connector: Male /Female
Type of fiber: 50/125, 62,5/125, 9/125
Patchcord length: ex 10.5m
Drawing: description of the product
Contact us for other configutration
Tools informations:
Mounting Tools:
LCFTV MO TOOL: LC FIELD Mounting tools
LX5TV MO TOOL: LC FIELD Mounting tools
Dismounting Tools *:
LCFTV DM TOOL: LC FIELD Dismounting tools
LX5TV DM TOOL: LC FIELD Dismounting tools
(To dismount the LC or LX5 you need to use both of dis-
mounting and mounting tools)
“N”: nickel plating
LC/LX5F
42
3,25
0,13 M
4 PL ACES
2 PL ACES
2 PL ACES
2 PL ACES
36,53
29,36
26,97
29,36
26,97 4xø3,25
40,50min
ø 32,94
29,36
26,97 4xø 3,25
40,50min
ø 28,98
PANEL THICKNESS
1,57 MIN 3,18 MAX 9,37 MAX
33,86
22,30
2,31 MAX
49,50max
35,15
46,02
39,67
ø 35,16
33,86
47,00min
20,24 MAX
25,40 mm
1,25 (inches)
29,62 MAX
39,19 mm
4,93
22,99 +0,15
-0
20,83 11,91
max
3,89
max
M28x1-6g
+0
-0,13
+0,25
-0,25
+0,20
-0,13
+0,20
-0,13
+0
-0,25
+0
-0,25
+0
-0,025
+0,025
-0
+0,043
-0,041
+0,25
-0,25
+0
-0,25
92
ø 38,10
Line drawings (Dimensions in mm)
nPlug (MIL DTL 38 999 series III Size 19)
nSquare Flange Receptacle (MIL DTL 38 999 series III Size 19)
nJam Nut Receptacle (MIL DTL 38 999 series III Size 19)
Protective caps
PANEL DRILLING
Square flange receptacle rear
panel mounting
Square flange receptacle
front panel mounting
PANEL DRILLING
Jam nut receptacle
rear panel mounting
Protective cap for
plug (nylon cord)
Protective cap for
receptacles (nylon cord)
43
RJ Switch Industrial Ethernet Switch
IP30
INDUSTRIAL RUGGED ETHERNET SWITCH
Amphenol offers a full range of Rugged Ethernet switches for industrial use.
These switches are specifically designed for industrial applications where
Real-Time is a key requirement. The wide range, from unmanaged Plug & Play
switches to those managed with fiber optics ports, will fulfill all your needs.
This family of switches, IP30 rated, is suitable for both Din-Rail or flat panel
mounting. This is an easy way to make the Ethernet networks of your manu-
facturing site, automation or control units deterministic.
This wide range of Ethernet switches is available with following features:
• Unmanaged, Real-Time Ring and Managed models
• RJ45 ports and up to two fiber optics ports (mutlimode or singlemode)
• 5 or 9 port models
KEY FEATURES
nRedundant power inputs with surge/spike protection
nUltra reliable 1,000,000 hours MTBF
nHazardous location: operation in Zone 2
nWide operating temperature range of –40°C to 70/85°C
nRugged metal packaging with DIN rail or direct panel mounting
nAuto-detecting, auto-crossover and auto-polarity
nFull-Duplex operation with flow control (no collisions!)
nRing Switch Networking Features
• Real-Time Ring for ultra-fast fault-tolerant loops
• Recovery time of 30 ms + 5 ms per hop!
• Ideal for deterministic systems and PLCs
• Real-time traffic prioritization
• Port mirroring for traffic diagnostic
nManaged Switch Networking Features
• Rapid Spanning Tree (RSTP) for fast redundant rings
• Priority queuing for real-time performance (QoS and CoS)
• SNMP v1 and v2 for network management
• SNMPv3 for authentication and encryption
• IGMP for multicast filtering
• VLAN for traffic segregation
• User friendly configuration (web, Telnet, RS232)
• Encryption using HTTPS, SSL, SSH, SNMPv3
• Message filtering to stop broadcast storms
• RMON and port mirroring for diagnostics
• The Power of Linux Inside
Applications
nFactory Automation
nRobotics
nProcess Control
nTransportation Systems
nData Acquisition & Transmission
DESCRIPTION
SC or ST fiber connector (1, 2 or none)
DIN-Rail or Panel Mounting Fixture
5 or 9 connectors (RJ45, SC or ST fiber)
Unmanaged, Ring or Managed Capability
Indicators for Power, Alarm Output Status
Indicators for Link Status and Datarate
• 10 Mbps
• 100 Mbps
Terminal block for Redundant Power Inputs + Alarm Output
IP30 Iridized Aluminum Enclosure
RJ Switch
44
IEEE Ethernet Standards
IEEE 802.3 /u 10 Mbps Ethernet and 100 Mbps Fast Ethernet
IEEE 802.3x Full-Duplex with Flow Control
IEEE 802.1p Priority Queuing – QoS, CoS, ToS/DS (Ring and managed models)
IEEE 802.1D/w Rapid Spanning Tree for redundant rings and Spanning Tree for interoperability
(managed models)
IEEE 802.1Q VLAN for traffic segregation (managed models)
Regulatory Approvals
EMI emissions EN55022, FCC part 15, ICES-003
EMC immunity IEC61326-1, IEEE C37.90
Shocks IEC60068-2-27
Vibrations IEC60068-2-6
Free Fall IEC60068-2-32
Hazardous Location UL1604, CSA C22.2/213 (Class 1, Div. 2), EN50021/Zone 2
Ethernet features
RJ45 ports 5 or 9 Shielded RJ45 ports 10/100BaseTX
Fiber optic ports SC or ST connectors
Datarate 100BaseFX (100Mbps)
Wavelength 1300 nm center
Fiber multimode (mm) optimal: 62.5/125 um
Fiber singlemode (sm) optimal: 9/125 um
Fiber max distance (Full duplex): 2km (mm), 15 or 40 km (sm)
Ethernet switch type Intelligent store & forward
Full / Half Duplex Configurable
RJ45 speed 10 or 100 Mbps auto-negotiation
RJ45 MDI/MDIX Auto-crossover connection
RJ45 TD and RD polarity Auto-polarity
Typical latency 16 us + frame time @ 10 Mbps (varies on load and settings)
5 us + frame time @ 100 Mbps
MAC addresses supported 2048
Memory bandwidth 3.2 Gbps
Environmental
Operating Temperature - 40°C to +85°C
(- 40°C to +70°C for RJS-9MS models)
Storage Temperature - 40°C to +85°C
Humidity (non-condensing) 5 to 95 % RH
Status RS and MS models only
“OK” contact output 10 – 30 VDC
(or 10 - 50 VDC depends on models)
Maximum current 0.5 A
Power Supply
Input Power (depends on models) 4 W - typical,
ALL PORTS ACTIVE AT 100 MBPS
Redundant Inputs 10 - 50 VDC (models RJS-5RS; RJS-9RS)
10 - 30 VDC (all other models)
MANAGED, RING & UNMANAGED SWITCH FEATURES
Power
protection
rating
Industrial MIL-STD-1275
Available on:
RJS-5RS / RJS-9RS
RJS-9MS -4 & -5
Surge protection 100 V for 1s
Transient
protection
15 KW peaks 15 KW peaks
Spike protection 5 KW
(10 times for 10 µs)
5 KW
(10 times for 10 µs)
250 V
(50 times for 100 µs)
EXCEEDS MIL-STD-1275
45
DIMENSIONS EXAMPLE FOR 5 PORT RING MODELS POWER AND ALARM WIRING
Part Number Code
Series RJS 5ES 1 - -
RJ-Switch
Type of Electronics
5ES: 5 ports total, Ethernet unmanaged switch
9ES: 9 ports total, Ethernet unmanaged switch
5RS: 5 ports total, Ethernet Ring switch
9RS: 9 ports total, Ethernet Ring switch
5MS: 5 ports total, Ethernet Managed switch
9MS: 9 ports total, Ethernet Managed switch
RJ45 or ber ports
1: RJ45 ports only, no ber
2: 1 multimode ber ports
3: 1 singlemode ber ports
4: 2 multimode ber ports (except for 9ES- models)
5: 2 singlemode ber ports (except for 9ES- models)
Style of Fiber connectors
Blank: No ber
SC: SC style ber connector(s)
ST: ST style ber connector(s)
SCL: SC style ber connector(s), long haul ber (40km), on singlemode models
STL: ST style ber connector(s), long haul ber (40km), on singlemode models
Pre-set for Ring models only
E0: Pre-set for 0 rings (special order)
E1: Pre-set for 1 ring (standard order), congured on last 2 ports
E2: Pre-set for 2 rings (special order), Ring 1 = last 2 ports, Ring 2 = ports 1 & 2.
Example: RJ-Switch, 5 ports Ethernet Ring switch, with 1 multimode ST fiber port, pre-set for 1 ring: RJS-5RS-2-ST-E1
A COMPLETE RANGE OF IP67 SEALED INDUSTRIAL ETHERNET SWITCHES
Amphenol offers the widest range of IP67 sealed Industrial Ethernet switches for very harsh environments. The Ethernet
interfaces are waterproof & rugged RJ45 connectors from the RJ FIELD series (www.rjfield.com). For any other product
such as RJ45/fiber optics converter, please do not hesitate to consult us.
RJS-PC5 SERIES
• 5 ports IP67 RJ45 connectors
• Polyester enclosure
• Ring or unmanaged models
RJS-AL SERIES
• 8 ports IP67 RJ45 connectors
• Aluminum enclosure
• Managed or unmanaged models
RJS-PC SERIES
• 8 ports IP67 RJ45 connectors
• Polyester enclosure
• Managed or unmanaged models
CONSULT OUR DEDICATED
WEBSITE FOR MORE INFORMATION:
www.rjswitch.com
46
RJ Switch
Harsh Environment Industrial Ethernet Switch
Plastic Enclosure - IP67
Rugged & Waterproof Switch
Amphenol offers a small size 5 port waterproof Ethernet Switch that can withstand a variety of extreme conditions - low &
high temperatures, shocks & vibrations, dust particles or even liquid immersion. This is an easy way to make the Ethernet net-
works of your manufacturing site, automation or control units deterministic.
Amphenol IP67 Industrial Ring Switch
Amphenol IP67 Ring Ethernet switch is a combination of very fast, fault-tolerant network redundancy Sixnet technology and
IP67 sealed & rugged packaging, specifically designed for the harshest environments.
Rings self-configure and just run, without any complex configuration.
The switch board is sealed within a waterproof IP67 polyester enclosure suitable for highly corrosive environments. The polyes-
ter material is glass fiber reinforced. This makes it very rugged against shocks and vibration.
The I/O interfaces are waterproof & rugged RJ45 connectors from the RJ FIELD plastic circular series.
Key Features
nWaterproof IP67 Rating (NEMA 6)
nReduced Installation Costs with the patented RJStop® system
nUse any standard RJ45 cordset
nRugged Enclosure in Polyester reinforced with 30% glass fiber
nRedundant power inputs with surge/spike protection
nUltra reliable 1,000,000 hours Mean Time Between Failure (MTBF)
nZone 2 hazardous location
nRing Switch Networking Features (managed features available !)
n Real-Time Ring for ultra-fast fault-tolerant loops
• Recovery time of 30 ms + 5 ms per hop!
n Modbus monitoring over Ethernet
•Ideal for deterministic systems and PLCs
n Real-time traffic prioritization (QoS and CoS)
• Assure delivery of real-time data
• Improve network utilization
• User settable priority assignments
n Advanced switch features
• User configurable port settings
• Port mirroring for traffic diagnostics
• Pre-configurable for Plug-And-Play simplicity
Industrial Applications
nFactory Automation
nRobotics
nProcess Control
nTransportation Systems
nData Acquisition & Transmission
RJ Switch
47
IP67 Unmanaged and Ring Switch Features
IEEE Ethernet Standards
IEEE 802.3 10Mbps Ethernet
IEEE 802.3u 100Mbps Fast Ethernet
IEEE 802.3x Full-Duplex with Flow Control
IEEE 802.1p standard QoS/CoS - Quality/Class of Service for Ring model only
Regulatory Approvals
EMI emissions EN55022, FCC part 15, ICES-003
EMC immunity: IEC61326-1, IEEE C37.90
Shocks: IEC60068-2-27
Vibrations: IEC60068-2-6
Free Fall: IEC60068-2-32
Hazardous Location: UL1604, CSA C22.2/213 (Class 1, Div. 2), EN50021/Zone 2
Ethernet features
Ports 5 Shielded RJ45 ports 10/100BaseTX
Ethernet switch type Intelligent store & forward
Full / Half Duplex Configurable
RJ45 speed 10 or 100 Mbps auto-negotiation
RJ45 MDI/MDIX Auto-crossover connection
RJ45 TD and RD polarity Auto-polarity
Typical latency 16 us + frame time @ 10 Mbps (varies on load and settings)
5 us + frame time @ 100 Mbps
MAC addresses supported 2048
Memory bandwidth 3.2 Gbps
Ethernet isolation 1500 Vrms 1 minute
Ring features Link loss recovery time: 30 ms plus 5 ms per hop
(for Ring model only) Maximum switches in ring: 50+
Dual Ring support
Power Supply
Input power (typical) ES: 2,4 W ; RS: 2,7 W
Status Reporting (for Ring model only)
“OK” contact output Output current: 0.5 A max
“OK” contact State OFF when a fail occurs
ON when power
and switching is OK
Environmental
Operating Temperature - 40°C to +75°C
Storage Temperature - 40°C to +85°C
Weight 0.54 kg
48
Real-Time Ring Switches
Amphenol Real-Time Ring switches combines the Plug&Play simplicity of an unmanaged switch with high performances of
Sixnet Ring managed switches.
nReal-Time fault-tolerant Ring
Recovery time of 30 ms + 5 ms per hop!
nReal-Time traffic prioritization (QoS & CoS)
Assure delivery of real-time data
nAvailable Managed features
User configurable port settings
Port mirroring for traffic diagnostics
Pre-configurable for Plug & Play simplicity
The use of such switches provides a fast network and avoids faults. When a break occurs, the switch instantly transfers data to
new path. The link loss recovery is 30 ms plus 5 ms times the number of Ring switches in the ring. For example, 10 ring switch-
es will recover in less than 80 ms. Rings can be pre-configured to “just run”. They don’t need an assigned IP address. But if you
like, you can fine tune the performance of the ring by using a simple Windows wizard (which is free).
Ring networks can be divided into multiple “sub-rings” which enhance reliability and recovery speed through small ring paths.
The prioritization of messages assures delivery of real-time data. Some applications need to force no-real-time data (such as
video information) to lower priority and force critical real-time data at higher priority. Network utilization is improved.
This combination of Ethernet technology associated with rugged and sealed protective enclosure is the ideal solution to
deliver deterministic performance to your industrial systems even in the harshest environment!
Description (example for Ring model)
49
Dimensions (mm/inch)
190 [7.48]
75.4 [2.968]
75 [2.953]
107.6 [4.236]
Part Numbers
Series
IP67 RJ-Switch, with polyester body
RJS-PC 5ES 1
Type of Electronics
5RS: 5 ports 10/100 Mbps, Ring switch (standard order)
5ES: 5 ports 10/100 Mbps, Unmanaged switch (special order)
Connectors
1: RJ45 ports, 10/100BaseT(X)
1CAPS: Caps are attached on both power and data receptacles
Military Rated Protection
Blank: Industrial protection (standard order)
EP: Extended power protection exceeds MIL-STD-1275 (special order)
Example IP67 Ethernet Ring switch, 5 ports 10/ 100 Mbps, with caps attached on the receptacles: RJS-PC-5RS-1CAPS
Note The Ring model is pre-set for 1 ring enabled on the ports 4 and 5.
You may change the configuration by using the free windows configuration tool.
Simply choose the desired pair of ports for your new enabled ring.
Accessories
n P/N: RJF PC5 PWR
Plug for power port
Sealing protection: IP67
n P/N: RJF RB 6
Plugs for RJ45 ports
Sealing protection: IP67
FREE WINDOWS
Configuration tool
Download it at
www.rjswitch.com
50
RJ Switch Harsh Environment Military Ethernet Switch
Metallic enclosure – IP67 – Gigabit
Sealed, Rugged & Waterproof Switch
Amphenol offers 9 ports managed, RING and unmanaged Ethernet Switches that can withstand a variety of extreme conditions.
Whatever the situation - high temperatures, extreme shocks & vibrations, dust particles or even liquid immersion there is a solu-
tion available.
This is an easy way to make the Ethernet networks of your systems deterministic. Up to 3 gigabit ports are offered! The switch
electronics are sealed within a waterproof IP67 metallic enclosure. The conductive cadmium plating is suitable for most demand-
ing EMI-RFI environments. The I/O interface includes redundant power inputs as well as waterproof rugged RJ45 connectors
from the RJF TV FIELD threaded product series based on MIL-DTL-38999 (Series III) metallic shell size 19. This series enables the
transformation without tooling any standard RJ45 cordset into a robust and waterproof connection system.
Applications
Military Applications
nData Acquisition & Transmission
nBattlefield Communication C4ISR
nRugged Networks
nMobile Communications
nTest Equipment
nAvionic & Shipboard Systems
RING switch
n Ring for fast fault-tolerant loops
nRecovery time of 30 ms + 5 ms per hop!
nQoS and CoS priority queuing
MANAGED switch
nRSTP for redundant rings
nQoS and CoS priority queuing
nSNMPv3 authentication and encryption
nIGMP for multicast filtering
nVLAN for trafic segregation
nAnd much more !
RJ Switch
Key Features
Rugged environmental features
nRugged metal packaging with cadmium olive drab protection
nMIL-DTL-38999 III connectors for both power and Ethernet ports
nIP65/IP67 rated
nMIL-STD-1275 Surge and Spike protection
nMIL-STD-810F shocks
nZone 2 hazardous location
nWide operating temperature range of –40°C to 70°C
nAltitude 3000m height; transportation 10000m height
Ethernet features
n3 ports 10/100/1000-BaseT(X) + 6 ports 10/100-BaseT(X)
nUnmanaged, RING unmanaged and Managed models
nFull-Duplex operation with flow control (no collisions!)
nAuto-detecting, auto-crossover and auto-polarity
51
Managed & Unmanaged Switch Features
IEEE Ethernet Standards
Models Features 802.3/u 802.3x 802.3z 802.1p 802.1D 802.1w 802.1Q
RJS ML 9ES Unmanaged P P
RJS ML 9RS RING P P P
RJS ML 9RG RING - Gigabit PPPP
RJS ML 9MS Managed PP PPPP
RJS ML 9MG Managed - Gigabit PPPPPPP
IEEE 802.3 /u 10 Mbps Ethernet and 100 Mbps Fast Ethernet
IEEE 802.3x Full-Duplex with Flow Control
IEEE 802.3z Gigabit 1000 Mbps Ethernet
IEEE 802.1p Priority queuing – QoS, CoS, ToS/DS
IEEE 802.1D/w Rapid Spanning Tree for redundant rings and Spanning Tree (interoperability)
IEEE 802.1Q VLAN for traffic segregation
Regulatory Approvals
EMI emissions EN55022 class A, FCC part 15, ICES-003
EMC immunity IEC61326-1, IEEE C37.90
Shocks: MIL-STD-810F : 40g, 11ms, 18 saw tooth shocks
Hazardous Location: UL1604, CSA C22.2/213, EN50021 Class1, Div. 2 / Zone 2
Power Supply
Redundant 24 VDC Input 10 – 50 VDC for Ring -9RS models
10 - 30 VDC for all other models
Input power 4 to 9 W typical (all ports active), depends on models
Connectors for power TV 07 RW 0935 P: MIL-DTL-38999 III Jam nut receptacle
olive drab cadmium plated
6 contacts size 22D
Ethernet features
RJ45 ports 9 shielded RJ45 ports 10/100 Base T(X) or 1000 Base T(X)
Connectors for RJ45 ports RJFTV 7 G: Jam nut receptacle based on MIL-DTL-38999 III
Olive drab cadmium plated
Full / Half Duplex Automatic or configurable
MDI / MDIX Auto-crossover connection
RJ45 speed 10, 100 or 1000 Mbps auto-negotiation
Typical latency 16 us + frame time @ 10 Mbps (varies on load and settings)
5 us + frame time @ 100 Mbps
MAC addresses supported 2048
8192 (gigabit models)
Memory bandwidth 3.2 Gbps
32 Gbps (gigabit)
Temperature
Operating Temperature - 40°C to +70°C
Storage Temperature - 40°C to +85°C
Status (Ring models)
“OK” contact output Sourcing power
Maximum current0.5 A
Weight approx 2.2Kg
Power
ratings
Industrial
specifications
9ES1; 9MS1; 9RG1;
9MG1
MIL-STD-1275
Specifications
RJS-ML-9RS1
Surge protection 100 V for 1s
Transient protection 15 KW peaks 15 KW peaks
Spike protection 5 KW
(10x for 10 µs)
5 KW
(10x for 10 µs)
250 V
(50x for 100 µs)
EXCEEDS MILSTD1275
52
RJ-Switch enclosure description Real-Time Ring Switches
Amphenol Real-Time Ring switches combines the Plug&Play
simplicity of an unmanaged switch with high performances
of managed switches.
The use of such switches provides a fast network and avoids
faults. When a break occurs, the switch instantly transfers data
to new path. The link loss recovery is 30 ms plus 5 ms times
the number of Ring switches in the ring. For example, 10 ring
switches will recover in less than 80 ms. Rings can be pre-con-
figured to “just run”. They don’t need an assigned IP address.
But if you like, you can fine tune the performance of the ring
by using a simple Windows wizard (which is free).
Ring networks can be divided into multiple “sub-rings” which
enhance reliability and recovery speed through the small ring
paths.
9 R ugge d IP 6 7
R J F TV E therne t P or ts
O ption a l C a ps A v a i la ble
for Unus ed P orts
No n-m a na ge d, R i ng o r
M a na ge d C a pa b il ity
IP 67 A luminum
E nc los ur e w ith
C ond uc ti v e P la ting
R e dun da nt
P ow er Inputs
A la r m O u tpu t
O ption a l C a ps
A v a i la b le for unus e d I/O
V e r tic a l M oun ti ng
F ix ture
L E Ds in di c a tin g
P o w e r a nd F a ult
L e ds i ndi c a ting
A c tiv i ty, L i nk S ta tus ,
Da ta r a te (1 0 /1 00 Mbps )
Note: the mode l shown
is gi ve n fo r ind ic a tion
Dimensions (mm) Military Aluminum ML Enclosure
Part Numbers
Series
RJ-Switch
RJS ML 9ES1
Type of Enclosure
ML: Aluminum, OD Green Cadmium Plating &
MIL-DTL-38999 (Series III) Receptacles
Type of Electronics
9ES1: Unmanaged 9 ports 10/100 Base T(X)
9RS1: Unmanaged RING 9 ports 10/100 Base T(X)
9RG1: Unmanaged RING 6 ports 10/100 Base T(X) + 3 ports 10/100/1000 Base T(X)
9MS1: Managed 9 ports 10/100 Base T(X)
9MG1: Managed 6 ports 10/100 Base T(X) + 3 ports 10/100/1000 Base T(X)
Accessories: Caps for receptacles fixed with string directly to the receptacle
Blank: No caps included
Caps: Attached caps for both power and data included
Example: Unmanaged RING switch in an aluminum enclosure with olive drab green conductive
cadmium plating, 9 ports 10/100 Base T(X) & RJF TV threaded coupling receptacles
& caps added to the switch: RJS ML 9RS1 CAPS
Accessories
n
Plugs for Ethernet ports
Based on MIL-DTL-38999
No tool required!
RJF TV 6 M G
n
Plugs for Power 1 and
Power 2
MIL-DTL-38999
Olive drab cadmium plated
Crimp contacts
6 contacts size 22D
TV 06 RW 0935 S
906
NOTE:
The model shown is given for indication.
The LEDs for Power status and ports activity depend on models.
Real-Time fault-tolerant Ring
Recovery time of 30 ms + 5 ms
per hop!
Real-Time traffic prioritization
(QoS & CoS)
Assure delivery of real-time data
Available Managed features
User configurable port settings
Port mirroring for traffic diagnostics
Pre-configurable for Plug & Play
simplicity
The informations given in this section are as a guideline only. We reserve the right to modify our products in any way we deem necessary.
53
RJFast is the only system on the market capable of
converting a standard RJ-45 cable into a category
6 Ethernet connector compatible with industrial
environments (including IP67) in a few seconds,
without tedious, long and costly crimping.
RJF RB (RJ FAST) CONCEPT
No
Tool
No
Cabling
www.rjeld.com
With RJF RB, RJ STOP is
directly molded into the shell
NEW
CAT6
NOTES
RJAST Concept
54
NOTES
55
RJ FIELD GLOSSARY
10BASE-T
10 Mbps Ethernet on twisted-pair (Category 3)
cable.
100BASE-T
The twisted pair version of 100 Mbps Ethernet.
Requires Category 5 cabling.
1000BASE-T
A recent LAN standard for implementing 1000
Mbps Ethernet on Category 5 cable. Also called
Gigabit Ethernet.
Auto-MDIX
A protocol which allows two Ethernet devices to
negotiate their use of the Ethernet Transmit (Tx) and
Receive (Rx) cable pairs. This allows two Ethernet
devices with MDI or MDI-X connectors to connect
without using a cross-over cable.
Baud
A unit of measurement that denotes the number
of bits that can be transmitted per second. For
example, if a modem is rated at 9600 baud it is
capable of transmitting data at a rate of 9600 bits
per second.
Bandwidth
The maximum capacity of a network channel.
Usually expressed in bits per second (bps). Ethernet
channels have bandwidths of 10, 100, and 1000
Mbps (Gigabit).
bps
Bits Per Second is the unit used for measuring line
speed, the number of information units transmitted
per second.
Broadcast
A transmission initiated by one station and sent to
all stations on the network.
Byte
The amount of memory needed to store one
character such as a letter or a number. Equal to 8 bits
of digital information. The standard measurement
unit of a file size.
Category 5
A performance classification for twisted pair cables,
connectors and systems. Specified to 100 MHz.
Suitable for voice and data applications up to 155
Mbps.
Category 5 e
Also called Enhanced Category 5. A performance
classification for twisted pair cables, connectors
and systems. Specified to 100 MHz. Suitable for
voice and data applications up to 1000 Mbps.
Category 6
A performance classification for twisted pair cables,
connectors and systems.Specified up to 250 MHz.
CSMA/CD
Carrier Sense Multiple Access/Collision Detect. The
Medium Access Control (MAC) protocol used in
Ethernet.
Data rate
The speed of the data transmission, measured in
bps (bits per second) or Mbps.
Duplex (Full, Half)
Full duplex is a communications method that allows
for the simultaneous transmission and reception of
data. In Half Duplex communication, transmissions
and receptions can occur in either direction but not
at the same time.
Ethernet
The most common network protocol in
use. A protocol is a set of rules enabling data
communications. Ethernet can operate over several
different media including fiber optic, coaxial cable
and twisted-pair cable.
IEEE 802.3
IEEE Working Group for CSMA/CD, the protocol
used in Ethernet transmissions.
IGMP snooping
The ability of a switch to observe Internet Group
Multicast Protocol (IGMP) traffic in order to learn
IP Multicast group membership. The purpose is to
restrict multicast transmissions to only those ports
which have requested them.
LAN
Local Area Network. A network of directly-
connected machines (located in close proximity),
providing high speed communication over physical
media such as fiber optics, coaxial cable, or twisted
pair wiring.
56
MAC Address
A unique address assigned to a station interface,
identifying that station on the network. With
Ethernet, this is the unique 48-bit station address.
Same as the physical address.
Megabit (Mb)
Megabit. One million bits of information, usually
used to express a data transfer rate; 1 Megabit/
second = 1Mbps.
Megabyte (MB)
MegaByte. A unit of data storage size which
represents one million characters of information.
Multicast
A transmission initiated by one station to many
stations of the network.
Port Mirroring
Port mirroring allows a switch port to monitor
packets from any or all of its ports so that traffic can
be analysed.
Quality of Service (QoS)
Some switches support QoS (per 802.1p and
802.1Q standards) whereby messages can be
assigned levels of priority. QoS is important where
time-critical applications can be impaired by data
delays.
RJ45
8-position modular jacks used on twisted pair links
for Ethernet cabling.
RJ-Field
A wide range of connectors which allow to reinforce
and seal standard RJ45 cable. See www.rjfield.com
SNMP
Simple Network Management Protocol. This is THE
standard used for switch management programs.
Spanning Tree Protocol (STP)
A link management protocol providing path
redundancy and preventing network loops by
defining a tree to span all switches in a network.
It forces redundant data paths into a standby
(blocked) state. If a path malfunction occurs, the
topology is reconfigured and the link reestablished
by activating the standby path.
TCP/IP
Transmission Control Protocol/Internet Protocol. A
set of protocols, resulting from ARPA efforts, used
by the Internet to support services such as remote
login (TELNET), file transfer (FTP) and mail (SMTP).
TELNET
The Internet standard protocol for remote login
(terminal connection) service. TELNET allows a user
at one site to interact with a remote timesharing
system at another site as if the user’s terminal were
connected directly to the remote computer.
VLAN
Virtual Local Area Network. A LAN that maps
stations on a basis other than location such as by
department, user type or application. Managing
traffic, workstations, and bandwidth can be easier
with a VLAN and improve network efficiency.
57
For more information, please visit our websites:
www.rjeld.com - www.usbeld.com - www.fweld.com - www.rjswitch.com
DOC-000075-ANG
Your local Contact:
The information given in this document are as a guideline only.
We reserve the right to modify our products in any way we deem necessary.
Any duplication is prohibited, unless approved in writing.
Design by amphenol japan, adapted by Steven Kilgallon - 02/2007
Gestion & Edition by soleaconseil Printed by
NORTH AMERICA
AMPHENOL Pcd, Inc.
2 Technology Drive
Peabody, MA 01960
Telephone: 1-978-532-8800
Fax: 1-978-532-6800
EUROPE
AMPHENOL SOCAPEX
948 Promenade de l’Arve - B. P. 29
74311 Thyez Cedex - France
Telephone: 33-4-5089-2800
Fax: 33-4-5096-1941
AMPHENOL LIMITED WHITSTABLE
Thanet Way, Whitstable - Kent, CT5 3JF
United Kingdom
Telephone: 44-1227-773-200
Fax: 44-1227-276-571
AMPHENOL JAPAN MIL/AERO INDUSTRIAL
689-1, Iseochi, Ritto-shi Shiga 520-3044 - Japan
Telephone: 81-77-553-8501
Fax: 81-77-551-2200
AMPHENOL DAESHIN
558 Sosa, SongNea
Bucheon-city, Kyunggi-Do - Korea 420-130
Telephone : 82-32-610-3800
Fax: 82-32-673-2507/665-6219
OTHER COUNTRIES
AMPHENOL MEXICO
Prolongacion Reforma 61-6 B2
Col. Paseo de las Lomas - C.P. 013130 Mexico
Telephone : 52-55-5258-9984
Fax: 52-55-5081-6890
AMPHENOL SOUTH AFRICA
30 Impala Road
2196 Chislehurston-Sandton - South Africa
Telephone: 27-11-783-9517 - Fax : 27-11-783-9519
BAR TEC LTD
4 Hagavish St, PO Box 279
Kfar Saba 44102 - Israel
Telephone: 972-9-767-4097
Fax: 972-9-767-4324
AMPHENOL ARGENTINA
“Av. Callao 930 2do piso Oficina B “Plaza”
C1023” - AAP Buenos Aires - Argentina
Telephone: 54-11-4815-6886
Fax: 54-11-4814-5779
AMPHENOL AUSTRALIA PTY LIMITED
2 Fiveways Blvd., Keysborough
Melbourne, Victoria 3173 - Australia
Telephone: 61-3-8796-8888
Fax: 61-3-8796-8801
AMPHENOL DO BRAZIL
Rua Diogo Moreira, 132, 20 andar, rooms 2001-2-3
CEP: 05423-010 Sao Paulo SP - Brazil
Telephone: 55-11-3815-1003
Fax: 55-11-3815-1629
AMPHENOL AIR LB GmbH
Am Kleinbahnhof 4 - 66740 Saarlouis Germany
Telephone: 49-6831-981-00
Fax: 49-6831-981-030
AMPHENOL ITALIA
Via Barbaiana n. 5, 20020 Lainate - Milano - Italy
Telephone: 39-02-93254.1
Fax: 39-02-93254.444
AMPHENOL IBERICA
AMPHENOL SCANDINAVIA
Ängsullsvägen 7 - S-187 51 Täby - Sweden
Telephone: +46702129200
Fax: +46702634677
Edificio "Burgosol"
c/Comunidad de Madrid, 35 - bis - Oficina No 55
ES- 28230 Las Rozas - Madrid - Spain
Telephone: 34-91-640-73-02/03/04
Fax: 34-91-640-73-07
AMPHENOL INTERCONNECT INDIA
PRIVATE LIMITED
105 Bhosari Industrial Area - Pune 411 026 - India
Telephone: 91-20-712-0363/0463/0155
Fax: 91-20-712-0581
AMPHENOL PCD CHINA
Shenzen
Telephone: +86-755-8173-8281
www.amphenol.com.cn
ASIA
AMPHENOL BENELUX
Zadelmaker 121 NL-2401 PD Alphen aan den Rijn
The Netherlands
Telephone: 31-172-444-903
Fax: 31-172-240-254
AMPHENOL CENTRAL EUROPE
Topolowa 13, 41 600 Swietochlowice - Poland
Telephone: 48-32-3484-201 - Fax: 48-32-3484-202