MC34108 - NEWARK ELECTRONICS - Datasheet.Directory

AVX BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

www.avx.com

Version 12.6

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

Table of Contents

An Introduction to BestCap®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

BestCap® General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

SECTION 1: Electrical Ratings (A-B Series) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Electrical Ratings (BZ01/02/05/09). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

SECTION 2: Mechanical Specifications (A-Lead) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Mechanical Specifications (W-Lead) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mechanical Specifications (H-Lead) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Mechanical Specifications (L-Lead). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Mechanical Specifications (N-Lead) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Mechanical Specifications (S-Lead). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Packaging Specifications (BZ01/02/05/09). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Packaging Quantities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Cleaning/Handling/Storage Conditions/Part Marking/Termination Finish. . . . 14

Product Safety Materials Handling/Materials and Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Typical Weight Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SECTION 3: Electrical Characteristics – Schematic, Typical Characteristics. . . . . . . . . . . . . . . . . . . . 16

Mounting Procedure on a PCB for BestCap®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Qualification Test Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

SECTION 4: Application Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

BestCap®Construction/Voltage Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Enhancing the Power Capability of Primary Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

BestCap®for GSM/GPRS PCMCIA Modems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

SECTION 5: Extended Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and

data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement

and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required.

Specifications are typical and may not apply to all applications.

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

Supercapacitors (also referred to as Electrochemical

Capacitors or Double Layer Capacitors) have rapidly become

recognized, not only as an excellent compromise between

“electronic” or “dielectric” capacitors such as ceramic,

tantalum, film and aluminum electrolytic, and batteries (Figure

1), but also as a valuable technology for providing a unique

combination of characteristics, particularly very high energy,

power and capacitance densities.

There are, however, two limitations associated with

conventional supercapacitors, namely: high ESR in the tens

of Ohms range, and high capacitance loss when required to

supply very short duration current pulses. BestCap®

successfully addresses both of these limitations.

The capacitance loss in the millisecond region is caused by

the charge transfer (i.e. establishment of capacitance) being

carried out primarily by relatively slow moving ions in double

layer capacitors.

In the above-mentioned “electronic” capacitors, the charge

transfer is performed by fast electrons, thereby creating

virtually instant rated capacitance value. In the BestCap®, a

unique proton polymer membrane is used – charge transfer

by protons is close to the transfer rate for electrons and

orders of magnitude greater than organic molecules. Figure

2 below illustrates the severe capacitance loss experienced

by several varieties of supercapacitors under short pulse

width conditions. It can also be seen from Figure 2 how well

BestCap®retains its capacitance with reducing pulse widths.

For comparison purposes, the characteristic of an equivalent

capacitance value aluminum electrolytic capacitor is shown

in Figure 2. The electrolytic capacitor is many times the vol-

ume of the BestCap®.

ELECTROLYTIC

CAPACITOR

POLYMER

ELECTROLYTIC

ALUMINUM

TANTALUM

100

10001001010.1 10000

1000

10000

SPECIFIC ENERGY

Capacitance (mF)

Specific Energy (mFV/cc)

Figure 1. Specific Energy of Capacitor Types

INTRODUCING

BESTCAP®: A NEW GENERATION OF PULSE SUPERCAPACITORS

20%

40%

60%

80%

100%

1000 100

Actual Cap. (% of Nominal)

Pulse Width (msec)

10 1

EDLC-Electrochemical

double layer capacitor

Aluminum Electrolytic Capacitor

manufacturer A EDLC

manufacturer B EDLC

manufacturer C EDLC

Figure 2. Actual Capacitance vs. Pulse Width

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

BESTCAP®– A SERIES – MAXIMUM CAPACITANCE, LOW ESR

B SERIES – LOW PROFILE, LOW ESR

STANDARD:

ELECTRICAL SPECIFICATIONS Full dimensional specifications shown in section (2)

A Style: Through-Hole Mount

(Available in BZ01, BZ02 case only)

L-Style: Four Terminal Planar Mount

(Available in BZ01 and BZ02 case only)

S-Style: Three Terminal Planar Mount

(Available in BZ01, BZ05, BZ09 case only)

The BestCap®is a low profile device available in four case sizes. Capacitance range is from 6.8mF to 1000mF and includes 7

voltage ratings from 3.6V to 16V.

H-Style: Extended Stand-Off Through Hole Mount

(Available in BZ01, BZ02 case only)

BESTCAP®– AVAILABLE LEAD CONFIGURATIONS

BODY DIMENSIONS

Case Size L ±0.5 (0.020) W ±0.2 (0.008) H nom

mm (inches) mm (inches) mm (inches)

BZ01 28 (1.102) 17 (0.669) 2.3 (0.091) – 6.5 (0.256)

BZ02 48 (1.890) 30 (1.181) 2.9 (0.114) – 6.8 (0.268)

BZ05 20 (0.787) 15 (0.590) 2.3 (0.091) – 6.5 (0.256)

BZ09 17 (0.669) 15 (0.590) 2.3 (0.091)

Capacitance range: 6.8mF – 1000mF

Capacitance tolerance: +80% / –20%

Voltage ratings (max): 3.6V 4.5V 5.5V 9V 12V 15V 16V 20V

Test voltages: 3.5V 4.2V 5.0V 8.4V 10.0V 11.0V 13.0V 16.0V

Surge test voltage: 4.5V 5.6V 6.9V 11.3V 15.0V 18.8V 20.0V 25.0V

Temperature range: –20°C to 70°C, consult factory for -40ºC and +75ºC options

N-Style: Two Terminal Planar Mount

(Available in BZ01, BZ05, BZ09 case only)

W-Style: Wire Lead Mount

(Available in BZ01, BZ05 case only)

HOW TO ORDER (See Detailed Electrical Specifications for valid combinations)

BZ 0 1 5 A 503 Z A B XX

BestCap®Standard Case Size Rated Series Capacitance Capacitance Lead Packaging Not Used For

0 = Standard 1 = 28mmx17mm Voltage A = Maximum Code Tolerance Format B = Bulk Standard

1 = High Cap 2 = 48mmx30mm 3 = 3.6V Capacitance (Farad Code) Z = (+80/-20)% A, H, L, N, Product

5 = 20mmx15mm 4 = 4.5V B = Low Profile 8 = (+50/-20)% S or W (Consult

9 = 17mmx15mm 5 = 5.5V P = (+100/-0)% Factory For

9 = 9.0V N = (+30/-30)% Special

C = 12.0V Requirements)

F = 15.0V

G = 16.0V

K = 20.0V

LEAD-FREE COMPATIBLE

COMPONENT

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

SECTION 1: ELECTRICAL RATINGS

CAPACITANCE / VOLTAGE / CASE SIZE MATRIX

A-SERIES – MAXIMUM CAPACITANCE

Capacitance Rated Voltage DC at 25°C

mF Code 3.6V 5.5V 9.0V 12.0V 16.0V

Case Lead Case Lead Case Lead Case Lead Case Lead

Size Styles Size Styles Size Styles Size Styles Size Styles

10 103 BZ05 N, S

22 223 BZ01 A, H, S

33 333 BZ05 N, S, W BZ01 A, H, S

47 473 BZ11 S

50 503 BZ01 A, H, S, L

68 683 BZ05 S

70 703 BZ01 A, H, S, L

90 903 BZ02 A, H, L

100 104 BZ01 A, H, S, L

120 124 BZ02 A, H, L BZ12 A, L

140 144 BZ01 A, H, S, L

150 154 BZ15 S

200 204 BZ02 A, H, L

280 284 BZ02 A, H, L

400 404 BZ02 A, H, L

470 474 BZ12 A

560 564 BZ02 A, H, L

1000 105 BZ12 A, H, L

B-SERIES – LOW PROFILE

Capacitance Rated Voltage DC at 25°C

mF Code 3.6V 4.5V 5.5V 9.0V 12.0V 15.0V 20.0V

Case Lead Case Lead Case Lead Case Lead Case Lead Case Lead Case Lead

Size Styles Size Styles Size Styles Size Styles Size Styles Size Styles Size Styles

4.7 472 BZ05 N, S, W

6.8 682 BZ05 N, S, W BZ01 N, S, W

15 153 BZ09 N, S, W BZ05 N, S, W BZ01 A, H, S

22 223 BZ05 N, S, W BZ01 A, H, S

30 303 BZ01 S, N

33 333 BZ01 S, N, W BZ05 S, N, W

47 473 BZ15 N, S, W BZ11 S

50 503 BZ01 S, N, W

60 603 BZ01 A, H, S, L

100 104 BZ11 S, N, W

SECTION 1: ELECTRICAL RATINGS

ELECTRICAL RATINGS - SEE SECTION 2 FOR DIMENSIONAL REFERENCES

BZ 01 CASE SIZE

Part Rated Capacitance ESR Leakage Height A-Lead Height H-Lead Height S-Lead Height S-Lead

Number Voltage (mF) (mOhms at 1 kHz) Current (mm) (mm) (AJ)*

(Volts) (µA max) (mm) (mm)

Nominal

+80%, –20% Typical Maximum Maximum H max H max H max H max

3.6V

BZ013B503Z_B 50 100 120 5 NA NA 3.2 2.1

BZ013A703Z_B 3.6V 70 140 168 5 3.5 6.4 4.0 2.9

BZ113B104Z_B 100 100 120 10 NA NA 3.2 2.1

BZ013A144Z_B 140 70 84 5 5.3 8.2 5.8 NA

4.5V

BZ014B333Z_B 4.5V 33 150 180 5 NA NA 3.5 2.4

5.5V

BZ015B303Z_B 30 160 192 5 NA NA 3.8 2.7

BZ015A503Z_B 5.5V 50 160 192 5 4.1 7.0 4.6 3.5

BZ015B603Z_B 60 80 96 10 5.4 8.3 5.9 NA

BZ015A104Z_B 100 80 96 10 6.7 9.6 7.2 NA

9.0V

BZ019B223Z_B 9.0V 22 250 300 5 4.7 7.6 5.2 4.1

BZ019A333Z_B 33 250 300 5 5.5 8.4 6.0 4.9

12.0V

BZ01CB153Z_B 12.0V 15 350 420 5 5.9 8.8 6.4 5.3

BZ01CA223Z_B 22 350 420 5 7.1 10.0 7.6 6.5

16.0V

BZ01GB682ZSB 16.0V 6.8 400 480 10 6.8

20.0V

BZ01KB682ZSB 20.0V 6.8 400 480 10 6.8

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

BZ 02 CASE SIZE

Part Rated Capacitance ESR Leakage Height A-Lead Height H-Lead Height L-Lead

Number Voltage (mF) (mOhms at 1 kHz) Current (mm) (mm) (mm)

(Volts) (µA max)

Nominal

+80%, –20% Typical Maximum Maximum H max H max H max

3.6V

BZ023A284Z_B 3.6V 280 45 54 20 3.5 6.4 3.7

BZ023A564Z_B 560 25 30 40 5.3 8.2 5.5

5.5V

BZ025A204Z_B 200 60 72 20 4.1 7.0 4.3

BZ025A404Z_B 5.5V 400 35 42 40 6.7 9.6 6.9

BZ125A105Z_B 1000 35 42 120 6.7 9.6 6.9

9.0 V

BZ029A124Z_B 9.0V 120 70 84 20 5.8 8.7 6.0

12.0V

BZ02CA903Z_B 12.0V 90 90 108 20 7.4 10.3 7.6

16.0V

BZ12GA124Z_B 16.0V 120 160 192 60 9.1 9.1

* Select S-Lead BZ01 BestCap®are available with insulation on the bottom of the part and zero clearance from the PCB. See section 2.6 for

dimensions. To order, please add special requirement AJ to the end of the part number. Example: BZ013B503ZSBAJ

All capacitance, ESR, and leakage current values listed in these tables are at room temperature only.

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

BZ 05 CASE SIZE

Part Rated Capacitance ESR Leakage Height N-Lead Height S-Lead

Number Voltage (mF) (mOhms at 1 kHz) Current (mm) (mm)

(Volts) (µA max)

Nominal

+80%, –20% Typical Maximum Maximum H max H max

4.5V

BZ054B223Z_B

4.5V 22 170 204 5 2.3 2.3

BZ154B473Z_B

47 170 204 10 2.3 2.3

5.5V

BZ055B153Z_B 15 250 300 5 2.7 2.7

BZ055A333Z_B 5.5V 33 250 300 5 3.5 3.5

BZ055B333Z_B 33 125 150 10 NA 4.8

BZ155A104Z_B 100 125 150 20 NA 6.1

12.0V

BZ05CA103Z_B 12.0V 10 500 600 55 6.5 6.5

15.0V

BZ05FB682Z_B 15.0V 6.8 500 600 10 5.8 5.8

20.0V

BZ05KB472ZSB 20.0V 4.7 700 840 10 6.7

* The 4.5V BZ09 BestCap® are available only in a special low profile version.

All capacitance, ESR, and leakage current values listed in these tables are at room temperature only.

BZ 09 CASE SIZE

Part Rated Capacitance ESR Leakage Height N-Lead Height S-Lead

Number Voltage (mF) (mOhms at 1 kHz) Current (mm) (mm)

(Volts) (µA max)

Nominal

+80%, –20% Typical Maximum Maximum H max H max

4.5V

BZ094B153Z_BAI 4.5V 15 250 300 5 2.4* 2.3*

SECTION 2: MECHANICAL SPECIFICATIONS

2.1 Case Dimensions & Recommended PCB Layout

2.1.1: A-Style Configuration (Pin Through Hole)

Case Dimensions: mm (inches)

Case Size BL W H L S LO LW LL

+1.0 (0.040)/-0 +1.0 (0.040)/-0 (Maximum) ±1.0 (0.040) ±0.1 (0.004) ±0.2 (0.008) ±0.2 (0.008) ±0.2 (0.008)

BZ01 28 (1.102) 17 (0.669) See Section 1 32 0.45 (0.018) 1.5 (0.059) 1.27 (0.050) 2.5 (0.098)

BZ02 48 (1.890) 30 (1.181) See Section 1 52 0.45 (0.018) 1.5 (0.059) 1.27 (0.050) 2.5 (0.098)

TABLE 2.1.1: A-STYLE DIMENSIONS

2.1.2: A-Lead Configuration (Through Hole)

Recommended PCB Dimensions: mm (inches)

Case Size A B C D

±0.05 (0.002) ±0.05 (0.002) ±0.05 (0.002) ±0.1 (0.004)

BZ01 17.25 (0.679) 8.90 (0.350) 28 (1.102) Ø1.4 (0.055)

BZ02 30.25 (1.191) 8.90 (0.350) 48 (1.890) Ø1.4 (0.055)

TABLE 2.1.2: A-LEAD LAYOUT DIMENSIONS

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

SECTION 2: MECHANICAL SPECIFICATIONS (cont’d)

2.2.1: W-Style Case Dimensions

RED

BLACK

TABLE 2.2.1: W-STYLE CASE DIMENSIONS

Case Dimensions: mm (inches)

LWHBLB

Case Size ±0.5 (0.020) +1.0 (0.040)/-0 (Maximum) +1.0 (0.040)/-0 ±0.5 (0.020)

BZ05 50.5 (1.988) 15 (0.591) See Section 1 25.4 (1.0) 10 (0.394)

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

Case Dimensions: mm (inches)

BL W H L SLO LW LL

Case Size +1.0 (0.040)/-0 +1.0 (0.040)/-0 (Maximum) ±1.0 (0.040) +0.5 (0.020)/ ±0.2 (0.008) ±0.2 (0.008) ±0.2 (0.008)

-0.4 (0.016)

BZ01 28 (1.102) 17 (0.669) See Section 1 32 (1.260) 3.0 (0.118) 1.5 (0.059) 1.27 (0.050) 2.5 (0.098)

BZ02 48 (1.890) 30 (1.181) See Section 1 52 (2.047) 3.0 (0.118) 1.5 (0.059) 1.27 (0.050) 2.5 (0.098)

BZ05 20 (0.787) 15.6 (0.614) See Section 1 24.3 (0.957) 3.0 (0.118) 1.5 (0.059) 1.27 (0.050) 2.5 (0.098)

PCB Dimensions: mm (inches)

Case Size A B C D

±0.05 (0.002) ±0.05 (0.002) ±0.05 (0.002) ±0.1 (0.004)

BZ01 17.25 (0.679) 8.90 (0.350) 28 (1.102) Ø1.4 (0.055)

BZ02 30.25 (1.191) 8.90 (0.350) 48 (1.890) Ø1.4 (0.055)

BZ05 15.25 (0.600) 8.90 (0.350) 19 (0.748) Ø1.4 (0.055)

SECTION 2: MECHANICAL SPECIFICATIONS (cont’d)

2.3.1: H-Style Case Dimensions (Through Hole Extended Height)

TABLE 2.3.1: H-STYLE CASE DIMENSIONS

2.3.2: H-Lead Configuration (Through Hole Extended Height)

TABLE 2.3.2: H-LEAD LAYOUT DIMENSIONS

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

SECTION 2: MECHANICAL SPECIFICATIONS (cont’d)

2.4.1: L-Lead Configuration (Planar Mount)

LL LW

TABLE 2.4.1: L-STYLE CASE DIMENSIONS

2.4.2: L-Lead Configuration (Planar Mount)

TABLE 2.4.2: L-STYLE LEAD LAYOUT

Case Dimensions: mm (inches)

Case Size BL W H L S LO LW LL

+1.0 (0.040)/-0 +1.0 (0.040)/-0 (Maximum) ±1.0 (0.040) ±0.2 (0.008) ±0.2 (0.008) ±0.2 (0.008) ±0.5 (0.020)

BZ01 28 (1.102) 17 (0.6691) See Section 1 33 0.55 (0.022) 1.5 (0.059) 1.27 (0.050) 2.4 (0.098)

BZ02 48 (1.890) 30 (1.181) See Section 1 52 0.55 (0.022) 1.5 (0.059) 1.27 (0.050) 2.4 (0.098)

PCB Dimensions: mm (inches)

Case Size A B C PL PW

±0.1 (0.004) ±0.1 (0.004) ±0.1 (0.004) ±0.2 (0.008) ±0.2 (0.008)

BZ01 19.2 (0.776) 10.8 (0.425) 28 (1.102) 3.0 (0.118) 3.7 (0.146)

BZ02 32.2 (1.268) 10.8 (0.425) 48 (1.890) 3.2 (0.126) 3.7 (0.146)

Case Dimensions: mm (inches)

Case Size L W H B LL LW EL EW

±0.5 (0.020) +1.0 (0.040)/-0 (Maximum) ±0.5 (0.020) ±0.2 (0.008) ±0.2 (0.008) ±0.5 (0.020) ±0.5 (0.020)

BZ01 30.5 (1.201) 17 (0.669) See Section 1 11.2 (0.441) 2.5 (0.098) 1.4 (0.055) 2.5 (0.098) 1.4 (0.055)

BZ05 23.5 (0.925) 15 (0.591) See Section 1 7.5 (0.295) 2.5 (0.098) 2.5 (0.098) 3.5 (0.138) 2.5 (0.098)

BZ09 20.5 (0.807) 15 ( 0.591) See Section 1 7.5 (0.295) 2.5 (0.098) 2.5 (0.098) 3.5 (0.138) 2.5 (0.098)

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

SECTION 2: MECHANICAL SPECIFICATIONS (cont’d)

2.5.1: N-Lead Configuration

TABLE 2.5.1: N-STYLE CASE DIMENSIONS

2.5.2: N-Lead Configuration (Planar Mount)

APW

LPL

RPL

TABLE 2.5.2: N-STYLE LEAD LAYOUT

PCB Dimensions: mm (inches)

Case Size A B PW LPL RPL

±0.5 (0.020) ±0.1 (0.004) ±0.1 (0.004) ±0.1 (0.004) ±0.1 (0.004)

BZ01 0.5 (0.020) 9.5 (0.374) 3.2 (0.126) 3.5 (0.138) 3.5 (0.138)

BZ05 1.0 (0.039) 5.9 (0.232) 4.1 (0.161) 2.5 (0.098) 3.5 (0.138)

BZ09 1.0 (0.039) 5.9 (0.232) 4.1 (0.161) 2.5 (0.098) 3.5 (0.138)

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

SECTION 2: MECHANICAL SPECIFICATIONS (cont’d)

2.6.1: S-Lead Configuration (Planar Mount)

WEW

TABLE 2.6.1: S-STYLE CASE DIMENSIONS

2.6.2: S-Lead Layout (Planar Mount)

LPL

LPW

AEPW

EPL

TABLE 2.6.2: S-STYLE PAD LAYOUT DIMENSIONS

Planar Mount

“S”

Available in

BZ01, BZ05

& BZ09

Case Size Only

Case Dimensions: mm (inches)

Case Size BL W H L EL EW LL LW

+1.0 (0.040)/-0 +1.0 (0.040)/-0 (Maximum) ±1.0 (0.040) ±0.5 (0.020) ±0.2 (0.008) ±0.5 (0.020) ±0.2 (0.008)

BZ01 28 (1.102) 17 (0.669) See Section 1 38.7 (1.524) 5.0 (0.197) 4.5 (0.177) 5.7 (0.224) 2.0 (0.079)

BZ05 20 (0.787) 15 (0.591) See Section 1 26 (1.024) 3.5 (0.138) 2.5 (0.098) 2.5 (0.098) 2.5 (0.098)

BZ09 17 (0.669) 15 (0.591) See Section 1 23 (0.906) 3.5 (0.138) 2.5 (0.098) 2.5 (0.098) 2.5 (0.098)

PCB Dimensions: mm (inches)

Case Size A B EPL EPW LPL LPW

±0.1 (0.004) ±0.1 (0.004) ±0.1 (0.004) ±0.1 (0.004) ±0.1 (0.004) ±0.1 (0.004)

BZ01 13.0 (0.512) 35.1 (1.382) 4.5 (0.177) 6.0 (0.236) 5.8 (0.228) 3.5 (0.138)

BZ05 10.0 (0.394) 25.0 (0.984) 3.0 (0.118) 4.5 (0.177) 2.9 (0.114) 4.5 (0.177)

BZ09 10.0 (0.394) 22.0 (0.886) 3.0 (0.118) 4.5 (0.177) 2.9 (0.114) 4.5 (0.177)

PACKAGING QUANTITIES:

Size No. of Rows No. of Columns Pieces/Tray

BZ01 5315

BZ02 428

BZ05 5420

BZ09 5420

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

SECTION 2: MECHANICAL SPECIFICATIONS (cont’d)

167.6

(6.60) 13.2

(0.52)

50.8

(2.00)

31.8

(1.25)

167.6

(6.60)

BZ02 Case:

167.6

(6.60) 13.2

(0.52)

71.0

(2.80)

38.1

(1.50)

167.6

(6.60)

BZ05, BZ09 Case:

167.6

(6.60) 13.2

(0.52)

38.1

(1.50)

28.6

(1.12)

167.6

(6.60)

2.7: Packaging Specifications

BZ01 Case:

This specification applies when our electrochemical supercapacitors are packed using a 165mm by 165mm container. The

parts are held in place by a 166mm by 166mm lid.

SECTION 2: MECHANICAL SPECIFICATIONS

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

2.8 CLEANING

The BestCap®supercapacitor is cleaned prior to shipment.

Should cleaning be required prior to insertion into the applica-

tion, it is recommended to use a small amount of propanol

taking care not to remove the label. The cell should not be

immersed due to possible deterioration of the epoxy encap-

sulation. Care must also be taken not to bend the leads.

2.9 HANDLING

Care should be taken not to allow grease or oil into the part

as it may lead to soldering problems. Handling should be

minimized to reduce possible bending of the electrodes

leads.

2.10 STORAGE CONDITIONS

AVX BestCap®supercapacitor is unaffected by the following

storage conditions:

Temperature: 15°C ~ 35°C

Humidity: 45% RH ~ 75% RH

This temperature and humidity range is specified for consid-

eration of terminal solderability. BestCap®are able to with-

stand shelf life at 70ºC for 1000 hours.

2.11 PART MARKING

2.12 TERMINATION FINISH

Gold over nickel, tin over nickel.

Capacitance

Country of Origin

Voltage

Date and

Lot Code

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

2.13 PRODUCT SAFETY MATERIALS HANDLING

Precautions

• Do not disassemble the capacitor.

• Do not incinerate the capacitor and do not use incineration

for disposal.

• The capacitor contains polymeric electrolyte and carbon

electrodes. However, since the polymer is composed of

acid based chemical ingredients, if punctured or

dismantled and the skin is contacted with the capacitor

internal components, it is recommended to wash the skin

with excess of running water.

• If any internal material contacts the eyes, rinse thoroughly

with running water.

• Be aware not to apply over-voltage. Combination of

charging at voltage greater than the nominal, plus high

temperature, plus prolonged time may result in capacitor

bulging or rupturing.

BestCap®is RoHS compliant

May be assembled with Pb-Free solder.

BESTCAP®– TYPICAL WEIGHT DATA

2.14 BESTCAP® MATERIALS AND WEIGHT

Rated Voltage (V) Capacitance (mF) Part Number Weight (g)

3.6V 50 BZ013B503Z_B 2.9

70 BZ013A703Z_B 4.2

100 BZ113B104Z_B 2.9

140 BZ013A144Z_B 5.3

280 BZ023A284Z_B 12.2

560 BZ023A564Z_B 15.9

4.5V 15 BZ094B153Z_B 1.5

22 BZ054B223Z_BBQ 1.8

33 BZ014B333Z_B 3.2

47 BZ154B473Z_BBQ 1.8

5.5V 15 BZ055B153Z_B 1.9

30 BZ015B303Z_B 3.4

33 BZ055A333Z_B 2.3

33 BZ055B333Z_B 2.1

50 BZ015A503Z_B 4.6

60 BZ015B603Z_B 5.5

68 BZ055A683Z_B 3.4

100 BZ015A104Z_B 6.1

200 BZ025A204Z_B 13.3

400 BZ025A404Z_B 18.4

1000 BZ125A105Z_B 18.4

9.0V 22 BZ019B223Z_B 4.4

33 BZ019A333Z_B 5.0

120 BZ029A124Z_B 15.6

12.0V 10 BZ05CA103Z_B 3.5

15 BZ01CB153Z_B 5.0

22 BZ01CA223Z_B 6.2

90 BZ02CA903Z_B 19.3

15.0V 6.8 BZ05FB682Z_B 2.8

16.0V 124 BZ12GA124Z_B 25

Materials Constituent RoHS BZ01 BZ02 BZ05 BZ09

Compliant? Weight % Weight % Weight % Weight %

Case Stainless Steel YES 56.7% 44.5% 64.8% 64.8%

Leads (A, H, and L lead only) Stainless Steel YES 4.2% 0.7%

Electrode Stainless Steel YES 13.6% 8.0% 13.6% 13.6%

Electrode Insulation Laminating Adhesive YES 2.3% 1.0% 2.4% 2.4%

Core Metallized Current Collector YES 5.2% 8.0% 1.6% 1.6%

Current Collector YES 2.5% 14.3% 1.0% 1.0%

Active Electrode YES 1.0% 5.7% 0.4% 0.4%

Core Sealant YES 0.9% 5.2% 0.3% 0.3%

Encapsulant Epoxy YES 10.3% 11.4% 11.8% 11.8%

Bottom Insulation Laminating Adhesive YES 2.3% 1.0% 2.4% 2.4%

Label Label YES 1.0% 0.2% 1.8% 1.8%

TOTAL 100% 100% 100% 100%

SECTION 3.2: TYPICAL CHARACTERISTICS

0.07

0.06

0.05

0.04

0.03

0.02

0.01

-25 -20 -15 -10 -5 0 5 10 15 20

Temperature (°C)

BZ015A503ZLB35

Capacitance (Farads)

25 30 35 40 45 50 55 60 65

0.700

0.600

0.500

0.400

0.300

0.200

0.100

0.000

-25 -20 -15 -10 -5 0 5 10 15 20

Temperature (°C)

BZ015A503ZLB35

ESR (Ohms)

25 30 35 40 45 50 55 60 65

Capacitance vs. Temperature ESR vs. Temperature

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

SECTION 3: ELECTRICAL CHARACTERISTICS – SCHEMATIC

3.1 Terminal Connections:

3.1.1: S-Lead

3.1.2: A-, H- & L-Lead

Common terminals connected to case Common terminals connected to case

3.1.3: C- & N-Lead

Devices are non polar but it is usual to maintain case at ground potential

0.1

ESR (Ohms)

0.01

10 100 1,000 10,000 100,000 1,000,000 10,000,000

Frequency (Hz)

100,000,000

BZ015A503

BZ014A104

BZ025A204

ESR vs. Frequency

1.00E+01

1.00E+00

1.00E-01

1.00E-02

ESR (Ohms)

10 100 1,000 10,000 100,000 1,000,000 10,000,000

Frequency (Hz)

100,000,000

BZ015A503

BZ014A104

BZ025A204

ESR Comparison

0.1

0.01

Impedance (Ohms)

10 100 1,000 10,000 100,000 1,000,000 10,000,000

Frequency (Hz)

100,000,000

BZ015A503

BZ014A104

BZ025A204

Impedance vs. Frequency

0.1

0.01

Impedance (Ohms)

10 100 1,000 10,000 100,000 1,000,000 10,000,000

Frequency (Hz)

100,000,000

BZ015A503

BZ014A104

BZ025A204

Impedance Comparison

SECTION 3.3: MOUNTING PROCEDURE ON A PCB FOR BESTCAP®

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

BestCap®products can be mounted on PCBs by either

selectively heating only the capacitor terminals by using a

pulsed reflow soldering station or by using hand soldering.

IR Reflow or wave soldering may not be used. The main

body of the device should be less than 60ºC at all times.

HAND SOLDERING STATION

Equipment: Temperature controlled, 50W general

purpose iron

Solder type: 63Sn/37Pb, rosin core wire

Temperature: 400ºC (+20ºC - 100ºC)

Time: 2 to 5 seconds maximum, smaller time

(2 sec.) at 420ºC and 5 sec. at 300ºC,

overall it being a time-temperature rela-

tionship. Shorter time, higher temperature

is preferred.

Solder Type: Lead Free, 95Sn/5Ag

Temperature: 430ºC (+20ºC - 100ºC)

Time: 2 to 5 seconds maximum, smaller time

(2 sec.) at 450ºC and 5 sec. at 330ºC,

overall a time-temperature relationship.

Shorter time, higher temperature is

preferred.

PULSED REFLOW SOLDERING

Application data for the ‘Unitek’ pulsed-reflow soldering

station.

Equipment:

Controller Uniflow ‘Pulsed Thermode Control’

Head Thin-line Reflow Solder Head

Solder paste type No Clean Flux

Solder composition 63% Sn, 37% Pb

Percent solids 88%

Solder thickness 6 mils

Solder-weld tip size 0.075"

Solder-weld tip force 6 lbs.

Temperature profile:

In both cases, the main body of the BestCap®part should be less than 60ºC at all times.

Temperature Time

Pre-heat 130ºC 0 sec.

Rise 440ºC (±10) 2 sec.

Reflow 440ºC (±10) 2 sec.

Cool 165ºC

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

SECTION 3.4: QUALIFICATION TEST SUMMARY

Test Test Method Parameter Limits

Initial Capacitance Charge to test voltage at room temperature. Disconnect parts from Capacitance (Cap) +80% / -20%

Measurement voltage to remove charging effects. Discharge cells with a constant current of rated Cap

(4 mA) noting voltage and time 1 and 2 seconds after beginning discharge.

C = I * dt/dv

Initial DCL Charge to test voltage at room temperature. Disconnect parts from Leakage Current (DCL) Within Limit

Measurement voltage to remove charging effects. Note voltage and time 5 minutes

and 25 minutes after disconnecting. I = C * dV/dt

Initial ESR Measurement frequency @ 1kHz; Measurement voltage @ 10 mV Equivalent Series +20% / -50%

Measurement at room temperature Resistance (ESR) of typical value

Load Life Apply test voltage at 70ºC for 1000 hours. Allow to cool to room DCL < 2.0x rated max.

temperature and measure Cap, DCL and ESR Cap > 0.7x rated

ESR < 3.0x rated

Shelf Life Maintain at 70ºC for 1000 hours with no voltage applied. Allow to DCL < 1.5x rated max.

cool to room temperature and measure Cap, DCL and ESR. Cap > 0.7x rated

ESR < 2.0x rated

Humidity Life Maintain at 40°C / 95% RH for 1000 hours. Allow to cool to room DCL < 1.5x rated max.

temperature and measure Cap, DCL and ESR. Cap > 0.7x rated

ESR < 1.5x rated

Leg pull strength Apply an increasing force in shear mode until leg pulls away Yield Force Not less than

(A and L leads only) 25 pounds shear

Surge Voltage Step

1 Apply 125% of the rated voltage for 10 seconds DCL < 1.5x rated max.

2 Short the cell for 10 minutes Cap > 0.7x rated

3 Repeat 1 and 2 for 1000 cycles ESR < 1.5x rated

Temperature Cycling Step

1 Ramp oven down to –20°C and then hold for 15 min. DCL < 1.5x rated max.

2 Ramp oven up to 70ºC and then hold for 15 min. Cap > 0.7x rated

3 Repeat 1 and 2 for 100 cycles ESR < 1.5x rated

Temperature Step Temp Soak Time (prior to test)

Characteristics

1 -40°C 4 hours DCL

Measure Cap, ESR, DCL (-40ºC rated parts only) 70°C < 10x rated

2 -20°C 4 hours

Measure Cap, ESR, DCL

3 -10°C 4 hours

Measure Cap, ESR, DCL Cap

4 0°C 4 hours 25°C > 80% rated

Measure Cap, ESR, DCL

5 25°C 4 hours ESR

Measure Cap, ESR, DCL -40°C < 20x rated

6 40°C 4 hours -20°C < 5x rated

Measure Cap, ESR, DCL -10°C < 4x rated

7 60°C 4 hours 70°C < 1.3x rated

Measure Cap, ESR, DCL < 1.3x rated

8 70°C 4 hours

Measure Cap, ESR, DCL

Thermal Shock Step

1 Place cells into an oven at –20°C for 30 minutes DCL < 2.0x rated max.

2 In less than 15 seconds, move cells into a Cap > 0.7x rated

70ºC oven for 30 minutes

3 Repeat 1 and 2 for 100 cycles ESR < 2.0x rated max.

Vibration Step

1 Apply a harmonic motion that is deflected 0.03 inches DCL < 2.0x rated max.

2 Vary frequency from 10 cycles per second to Cap > 0.7x rated

55 cycles at a ramp rate of 1 Hz per minute

3 Vibrate the cells in the X-Y direction for three hours ESR < 2.0x rated max.

4 Vibrate the cells in the Z direction for three hours

5 Measure Cap, ESR and DCL

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

4.1: ELECTROCHEMICAL EDLC VS.

ELECTRONIC TECHNOLOGY -

BESTCAP®CONSTRUCTION

To understand the benefits offered by the BestCap®, it is

necessary to examine how an electrochemical capacitor

works. The most significant difference between an electron-

ic capacitor and an electrochemical capacitor is that the

charge transfer is carried out by the electrons in the former

and by electrons and ions in the latter. The anions and

cations involved in double layer supercapacitors are con-

tained in the electrolyte which may be liquid (normally an

aqueous or organic solution) or solid. The solid electrolyte is

almost universally a conductive polymer.

Electrons are relatively fast moving and therefore transfer

charge “instantly.” However, ions have to move relatively

slowly from anode to cathode, and hence a finite time is

needed to establish the full nominal capacitance of the

device. This nominal capacitance is normally measured at

1 second.

The differences between EDLC (Electrochemical Double

Layer Capacitors) and electronic capacitors are summarized

in the table below:

4.2: VOLTAGE DROP

Two factors are critical in determining the voltage drop when

a capacitor delivers a short current pulse; these are ESR

and “available” capacitance as shown in Figure 4.

Figure 4. Voltage-time relation of capacitor unit

The instant voltage drop ΔVESR is caused by and is directly

proportional to the capacitor’s ESR. The continuing voltage

drop with time ΔVC, is a function of the available charge, i.e.

capacitance. From Figures 3 and 4 it is apparent that, for

very short current pulses, e.g. in the millisecond region, the

combination of voltage drops in a conventional supercapaci-

tor caused by a) the high ESR and b) the lack of available

capacitance causes a total voltage drop, unacceptable for

most applications. Now compare the BestCap®performance

under such pulse conditions. The ultra-low ESR (in

milliOhms) minimizes the instantaneous voltage drop, while

the very high retained capacitance drastically reduces the

severity of the charge related drop. This is explained further

in a later section.

EFFICIENCY/TALKTIME BENEFITS OF BESTCAP®

Since BestCap®, when used in parallel with a battery, pro-

vides a current pulse with a substantially higher voltage than

that available just from the battery as shown in Figure 5, the

efficiency of the RF power amplifier is improved.

Figure 5. GSM Pulse

Additionally, the higher-than battery voltage supplied by the

BestCap®keeps the voltage pulse above the “cut off volt-

age” limit for a significantly longer time than is the case for

the battery alone. This increase in “talk time” is demonstrated

in Figures 6(a) (Li-Ion at +25°C), and 6(b) (Li-Ion at 0°C).

3.6

3.4

3.2

0 1000 2000 3000 4000

3.8

Battery Voltage (Volts)

Current (Amps)

Time (µSeconds)

Battery Voltage Battery and Capacitor Voltage Current Pulse

Cell Case (Anode)

Electrode (Cathode)

Carbon

Insulation Material

Current Collector

Separator

SECTION 4: APPLICATION NOTES

• A capacitor basically consists of two conductive plates

(electrodes), separated by a layer of dielectric material.

• These dielectric materials may be ceramic, plastic film,

paper, aluminum oxide, etc.

• EDLCs do not use a discrete dielectric interphase

separating the electrodes.

• EDLCs utilize the charge separation, which is formed

across the electrode – electrolyte interface.

• The EDLC constitutes of two types of charge carriers:

IONIC species on the ELECTROLYTE side and

ELECTRONIC species on the ELECTRODE side.

▲t

▲V(IR)

▲V(Q)=I* ▲t/C(▲t)

▲

total=I*R + I*

▲

t/C(

▲

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

Figure 6a. Li-ION Battery at +25°C

Figure 6b. Li-ION Battery at +0°C

PULSE CAPACITOR APPLICATIONS

As mentioned earlier, the voltage drop in a circuit is critical

as the circuit will not operate below a certain cut-off voltage.

There are two sources of voltage drop (ΔV) which occur, the

first ΔVESR is because of the equivalent series resistance

(ESR) and the second, called the capacitive drop, is ΔVC.

From Ohm’s law,

voltage = current x resistance or V = IR

Let us say that the instantaneous starting voltage is Vo, or

voltage for the circuit from where the voltage drops. If the

capacitor has an ESR of 100 milliOhms and the current is 1

amp,

ΔVESR = 1 amp x (0.100) ohms = 0.1 volts or 100 milli-volts.

On demand, during the discharge mode, the voltage V = Vo

- ΔVESR = (Vo - 0.1) volts

The second voltage drop is because of the capacitance.

This is shown in the equation as a linear function because of

simplicity. Simply put,

Q (charge) = C (capacitance) x V (voltage)

The derivative, dQ/dt = I (current, in amps) = C x dV/dt

Hence, ΔVC(dV, the voltage drop because of capacitance) =

I x dt/C. This formula states that the larger the capacitance

value the lower the voltage drop. Compared to a Ta capacitor,

this ΔVCis reduced by a factor of about 10 to 100. So,

BestCap®has an advantage where higher capacitance is

needed. If the current pulse itself is 1 amp, the current pulse

width is 1 second and the capacitance is 10 millifarads, the

ΔVC= 1A x 1Sec/0.01F, or a 100 volts; such an application

is out of the range of BestCap®. However, if the pulse width

becomes narrower, say 10 milli-seconds, and the capaci-

tance is 100 millifarads, the ΔVC= 1 x (10/1000)/(100/1000)

= 0.1 volt or 100 milli-volts. This shows the advantage of the

large capacitance and hence the term “pulse” capacitor.

The specific power – specific energy graphs are used in the

battery industry to compare competitive products. As the dt

becomes smaller i.e.100 milliseconds, 10 milliseconds and

then 1 millisecond, our estimates show that the specific

power for the BestCap®is the highest as compared to our

competitors because of our choice of internal materials

chemistry.

Concl usi on: we now clearly show that BestCap®has an

advantage over competitors for short current pulse whose

widths are smaller than a few hundred milliseconds.

2.5

3.5

0 100 200 300 400

Cutoff Voltage Limits

Voltage (Volts)

Cutoff Voltage

3.4 Volts

3.5 Volts

3.6 Volts

Time (Minutes)

% Increase

28%

73%

300%

Battery AloneBattery with Pulse Capacitor

GSM Pulse @ 2 Amps

2.5

3.5

0 100 200 300 400

LI-ION Battery

Voltage (Volts)

500

Cutoff Voltage

3.4 Volts

3.5 Volts

3.6 Volts

Time (Minutes)

% Increase

28%

100%

300%

Battery AloneBattery with Pulse Capacitor

GSM Pulse @ 2 Amps 0°C

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

4.3 ENHANCING THE POWER

CAPABILITY OF PRIMARY BATTERIES

When electronic equipment is powered by a primary (non

rechargeable) battery, one of the limitations is the power

capability of the battery.

In order to increase the available current from the battery

while maintaining a constant voltage drop across the battery

terminals, the designer must connect additional cells in

parallel, leading to increased size and cost of both the

battery and the finished product.

When high power is only required for short periods, more

sophisticated approaches can be considered. The tradition-

al approach involves using a high power rechargeable

battery, charged by a low power primary cell.

A far superior solution, however, is the use of a BestCap®

Supercapacitor, which is a device specifically designed to

deliver high power.

Traditional design:

Design using BestCap®:

BestCap®Supercapacitor benefits to the designer are:

• Substantially lower voltage drop for pulse durations of up

to 100msec.

• Substantially lower voltage drop at cold temperatures

(–20°C).

• Discharge current limited only by the ESR of the capacitor

The following analysis compares a primary battery connect-

ed in parallel to a Lithium Tionil Chloride, to the same

primary battery connected to a BestCap®Supercapacitor.

Various current pulses (amplitude and duration) are applied

in each case.

BestCap® 5.5V 100mF

BestCap® 3.5V 560mF

Primary

Battery BestCap

Battery Powered

Equipment Requiring

High Current Pulses

Primary

Battery

Rechargeable

Battery

Battery Powered

Equipment Requiring

High Current Pulses

Pulse Voltage Voltage

Drop (mV) Drop (mV)

BestCap®Supercapacitors rechargeable battery

250mA / 1msec 25 150

500mA / 1msec 50 220

750mA / 1msec 75 150

200mA / 100msec at –20°C 232 470

Pulse Voltage Voltage

Drop (mV) Drop (mV)

BestCap®Supercapacitors rechargeable battery

250mA / 100msec 50 190

500mA / 100msec 100 350

750mA / 100msec 152 190

1500mA / 1msec 43 220

1500mA / 100msec 305 350

750mA / 100msec at –20°C 172 470

Additional BestCap®Rechargeable

Characteristics Battery

Maximum discharge current Not limited 5A Maximum

(single pulse)

Number of Cycles Not limited 40K to 400K

(to retain 80%

capacity)

4.4 BESTCAP®FOR GSM/GPRS PCM-

CIA MODEMS

There is an increasing usage of PCMCIA modem cards for

wireless LAN and WAN (Wide Area Network) applications.

The PCMCIA card is used as an accessory to Laptops and

PDAs and enables wide area mobile Internet access, includ-

ing all associated applications like Email and file transfer.

With the widespread use of GSM networks, a PCMCIA

GSM modem is a commonly used solution. To achieve

higher speed data rates, GSM networks are now being

upgraded to support the GPRS standard.

The design challenge:

GSM/GPRS transmission requires a current of approximate-

ly 2A for the pulse duration. The PCMCIA bus cannot supply

this amount of pulsed current. Therefore, there is a need for

a relatively large capacitance to bridge the gap.

The capacitor supplies the pulse current to the transmitter

and is charged by a low current during the interval between

pulses.

THE SOLUTION:

Capacitor

2 Ampere

Current

Voltage

+ from

PCMCIA bus

Transmitter

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

SOLUTION A SOLUTION B

Chip Tantalum BestCap®

BZ154B473ZSB

Rated Capacitance 2.2 47

(milli Farad)

Capacitance

@ 0.5msec Pulse 2.2 30

(milli Farad)

Operating Voltage (V) 3.7 3.7

ESR 50 160

(milli ohm)

Size (mm) .4 x 7 x 2 20 x 15 x 2.1

Voltage Drop* (V)

GPRS Pulse 0.804V 0.268V

(25% duty cycle)

Voltage After Pulse (V) 2.896 3.432

Cutoff Voltage (V) 3.1 3.1

Pass/FAIL FAIL PASS

* V=V1+V2=1.5A*ESR + (1.5A*1.154msec)/C

It is assumed that during the pulse, 0.5A is delivered by the

battery and 1.5A by the capacitor.

Concl usi on: High capacitance is needed to minimize voltage

drop. A high value capacitance, even with a higher ESR,

results in a lower voltage drop. Low voltage drop minimizes

the conductive and emitted electro magnetic interference

and increases transmitter output power and efficiency.

V1 = I*ESR

V2 = I*⌬t/C

}

SECTION 5: EXTENDED

TEMPERATURE RANGE

AVX continues to expand the BestCap®product offerings for

additional applications. For applications demanding other

temperature ratings, AVX offers special construction tech-

niques for high and low temperature performance upon

request.

AVX offers temperature range extensions as follows:

-40ºC to 70ºC, -20ºC to 75ºC and -40ºC to 75ºC.

AVX has extensive experience in manufacturing these alter-

nate temperature rating parts. Contact AVX for your special

temperature requirements.

BestCap®Ultra-low ESR

High Power Pulse Supercapacitors

NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given

herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements

or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not

recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are

typical and may not apply to all applications.

“Niobium Oxide Capacitors are manufactured and sold under patent license from Cabot Corporation, Boyertown, Pennsylvania U.S.A.”

AVX Products Listing

For more information please visit

our website at

http://www.avx.com

CONNECTORS

PASSIVES

Capacitors

Multilayer Ceramic

Film

Glass

Niobium Oxide* - OxiCap®

Pulse Supercapacitors

Tantalum

Circuit Protection

Thermistors

Fuses - Thin Film

Transient Voltage Suppressors

Varistors - Zinc Oxide

Directional Couplers

Thin-Film

Filters

Ceramic

EMI

Noise

SAW

Low Pass - Thin Film

Inductors

Thin-Film

Integrated Passive Components

PMC - Thin-Film Networks

Capacitor Arrays

Feedthru Arrays

Low Inductance Decoupling Arrays

Piezo Acoustic Generators

Ceramic

Resistors

Arrays

Miniature Axials

Timing Devices

Clock Oscillators

MHz Quartz Crystal

Resonators

VCO

TCXO

Automotive

Standard, Custom

Board to Board

SMD (0.4, 0.5, 1.0mm), BGA, Thru-Hole

Card Edge

DIN41612

Standard, Inverse, High Temperature

FFC/FPC

0.3, 0.5, 1.0mm

Hand Held, Cellular

Battery, I/O, SIMcard, RF shield clips

2mm Hard Metric

Standard, Reduced Cross-Talk

IDC Wire to Board

Headers, Plugs, Assemblies

Memory

PCMCIA, Compact Flash, Secure Digital, MMC,

Smartcard, SODIMM

Military

H Government, DIN41612

PolytectTM

Soft Molding

Rack and Panel

VariconTM

S-BCAP3M612-C

A KYOCERA GROUP COMPANY

http://www.avx.com

Contact:

AVX Greenville, SC

Tel: 864-967-2150

AVX Northwest, WA

Tel: 360-699-8746

AVX Midwest, IN

Tel: 317-861-9184

AVX Mid/Pacific, CA

Tel: 408-988-4900

AVX Northeast, MA

Tel: 617-479-0345

AVX Southwest, CA

Tel: 949-859-9509

AVX Canada

Tel: 905-238-3151

AVX South America

Tel: +55-11-4688-1960

AVX Limited, England

Tel: +44-1276-697000

AVX S.A.S., France

Tel: +33-1-69-18-46-00

AVX GmbH, Germany

Tel: +49-0811-95949-0

AVX SRL, Italy

Tel: +39-02-614-571

AVX Czech Republic

Tel: +420-57-57-57-521

AVX/ELCO UK

Tel: +44-1638-675000

ELCO Europe GmbH

Tel: +49-2741-299-0

AVX S.A., Spain

Tel: +34-91-63-97-197

AVX Benelux

Tel: +31-187-489-337

AVX/Kyocera (S) Pte Ltd.,

Singapore

Tel: +65-6286-7555

AVX/Kyocera, Asia, Ltd.,

Hong Kong

Tel: +852-2363-3303

AVX/Kyocera Yuhan Hoesa,

South Korea

Tel: +82-2785-6504

AVX/Kyocera HK Ltd.,

Taiwan

Tel: +886-2-2656-0258

AVX/Kyocera (M) Sdn Bhd,

Malaysia

Tel: +60-4228-1190

AVX/Kyocera International

Trading Co. Ltd.,

Shanghai

Tel: +86-21-3255 1933

AVX/Kyocera Asia Ltd.,

Shenzen

Tel: +86-755-3336-0615

AVX/Kyocera International

Trading Co. Ltd.,

Beijing

Tel: +86-10-6588-3528

AVX/Kyocera India

Liaison Office

Tel: +91-80-6450-0715

AMERICAS EUROPE ASIA-PACIFIC

KED Hong Kong Ltd.

Tel: +852-2305-1080/1223

KED Hong Kong Ltd.

Shenzen

Tel: +86-755-3398-9600

KED Company Ltd.

Shanghai

Tel: +86-21-3255-1833

KED Hong Kong Ltd.

Beijing

Tel: +86-10-5869-4655

KED Taiwan Ltd.

Tel: +886-2-2950-0268

KED Korea Yuhan Hoesa,

South Korea

Tel: +82-2-783-3604/6126

KED (S) Pte Ltd.

Singapore

Tel: +65-6509-0328

Kyocera Corporation

Japan

Tel: +81-75-604-3449

ASIA-KED

(KYOCERA Electronic Devices)