Not Recommended for New Designs, Use MKP385 MKP380 www.vishay.com Vishay BCcomponents AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES * 5 mm pitch * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Low losses due to low contact resistance and low loss dielectric make these products suitable for applications where high currents at high frequency occur or high stability is preferred. QUICK REFERENCE DATA Capacitance range (E24 series) 0.0022 F to 0.1 F Capacitance tolerance 10 %, 5 % Climatic category 55/085/56 Maximum application temperature 85 C Reference specifications IEC 60384-17 Dielectric Polypropylene film Electrodes Metallized film Construction Wound mono construction Encapsulation Flame retardant plastic case and epoxy resin UL-class 94 V-0 Leads Marking Tinned wire C-value; tolerance; rated voltage; manufacturer's type designation; code for dielectric material; manufacturer's emblem; code for factory of origin; year and week of manufacture Rated DC voltage 100 VDC; 160 VDC; 250 VDC; 400 VDC; 630 VDC Rated AC voltage 63 VAC; 100 VAC; 160 VAC; 200 VAC Rated peak-to-peak voltage 180 V; 280 V; 450 V; 560 V Rated temperature 85 C Performance grade Grade 1 (long life) Stability grade Grade 2 Note * For more detailed data and test requirements contact: dc-film@vishay.com Revision: 08-Sep-16 Document Number: 28136 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP380 www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters w l h lt O dt P 0.3 COMPOSITION OF CATALOG NUMBER MULTIPLIER (nF) TYPE AND PITCHES 380 5.0 mm CAPACITANCE (numerically) 0.1 2 1 3 10 4 Example: 104 = 10 x 10 = 100 nF 2222* BFC2 380 380 XX XX X XX XX X * Old ordering code PREFERRED TYPES TYPE 380 TYPE 380 Revision: 08-Sep-16 PACKAGING Ammopack PACKAGING LEAD CONFIGURATION H = 18.5 mm; P0 = 12.7 mm C-TOL. 100 V 160 V 250 V 400 V 630 V 10 % 25 35 45 55 65 66 LEAD CONFIGURATION ON REQUEST Ammopack H = 18.5 mm; P0 = 12.7 mm 5% 26 36 46 56 Loose in box Lead length 4.0 mm + 1.0 mm / - 0.5 mm 10 % 21 31 41 51 61 5% 22 32 42 52 62 Document Number: 28136 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP380 www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA - 100 VDC DESCRIPTION VALUE Tangent of loss angle: at 10 kHz at 100 kHz 0.018 F C 0.027 F 10 x 10-4 15 x 10-4 0.027 F < C 0.075 F 10 x 10-4 20 x 10-4 0.075 F < C 0.1 F 10 x 25 x 10-4 10-4 Rated voltage pulse slope (dU/dt)R at 100 V (DC) 80 V/s R between leads for C 1.0 F at 100 V; 1 min > 100 000 M R between interconnected leads and case; 100 V; 1 min > 100 000 M Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s 160 V; 1 min Withstanding (DC) voltage between leads and case 2840 V; 1 min Note (1) See "Voltage Proof Test for Metalized Film Capacitors": www.vishay.com/doc?28169 ELECTRICAL DATA AND ORDERING CODE CATALOG NUMBER BFC2 380 ..... AND PACKAGING URDC (V) CAP. (F) DIMENSIONS wxhxl (mm) MASS (g) (2) AMMOPACK (1) LOOSE IN BOX H = 18.5 mm, P0 = 12.7 mm lt = 4.0 mm + 1.0 mm / - 0.5 mm C-TOL. = 10 % LAST 5 DIGITS OF CATALOG NUMBER SPQ SPQ PITCH = 5.0 mm 0.3 mm; dt = 0.50 mm 0.05 mm; URAC = 63 V; Up-p = 180 V 0.018 25183 0.020 25203 0.022 25223 0.024 25243 0.027 25273 0.030 100 3.5 x 8.0 x 7.2 0.30 25303 0.033 25333 0.036 25363 0.039 25393 0.043 25433 0.047 25473 0.051 25513 0.056 25563 0.062 4.5 x 9.0 x 7.2 0.42 25683 0.075 25753 0.091 0.100 6.0 x 11.0 x 7.2 0.64 1000 2000 25623 0.068 0.082 1500 750 25823 25913 25104 Notes (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only * SPQ = Standard Packing Quantity Revision: 08-Sep-16 Document Number: 28136 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP380 www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA - 160 VDC DESCRIPTION VALUE Tangent of loss angle: at 10 kHz at 100 kHz 0.013 F C 0.027 F 10 x 10-4 15 x 10-4 0.027 F < C 0.068 F 10 x 10-4 20 x 10-4 Rated voltage pulse slope (dU/dt)R at 160 V (DC) 80 V/s R between leads for C 1.0 F at 100 V; 1 min > 100 000 M R between interconnected leads and case; 100 V; 1 min > 100 000 M Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s 256 V; 1 min Withstanding (DC) voltage between leads and case 2840 V; 1 min Note (1) See "Voltage Proof Test for Metalized Film Capacitors": www.vishay.com/doc?28169 ELECTRICAL DATA AND ORDERING CODE CATALOG NUMBER BFC2 380 ..... AND PACKAGING URDC (V) CAP. (F) DIMENSIONS wxhxl (mm) MASS (2) (g) AMMOPACK (1) LOOSE IN BOX H = 18.5 mm, P0 = 12.7 mm lt = 4.0 mm + 1.0 mm / - 0.5 mm C-TOL. = 10 % LAST 5 DIGITS OF CATALOG NUMBER SPQ SPQ PITCH = 5.0 mm 0.3 mm; dt = 0.50 mm 0.05 mm; URAC = 100 V; Up-p = 280 V 0.013 35133 0.015 35153 0.016 35163 0.018 35183 0.020 35203 0.022 35223 0.024 0.027 160 3.5 x 8.0 x 7.2 0.30 35243 35273 0.030 35303 0.033 35333 0.036 35363 0.039 35393 0.043 35433 0.047 35473 0.051 35513 0.056 35563 0.062 0.068 4.5 x 9.0 x 7.2 0.42 1500 35623 2000 1000 750 750 2000 35683 Notes (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only * SPQ = Standard Packing Quantity Revision: 08-Sep-16 Document Number: 28136 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP380 www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA - 250 VDC DESCRIPTION VALUE Tangent of loss angle: at 10 kHz at 100 kHz 0.0091 F C 0.027 F 10 x 10-4 15 x 10-4 0.027 F < C 0.043 F 10 x 10-4 20 x 10-4 Rated voltage pulse slope (dU/dt)R at 250 V (DC) 90 V/s R between leads for C 1.0 F at 100 V; 1 min > 100 000 M R between interconnected leads and case; 100 V; 1 min > 100 000 M Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 100 V/s 400 V; 1 min Withstanding (DC) voltage between leads and case 2840 V; 1 min Note (1) See "Voltage Proof Test for Metalized Film Capacitors": www.vishay.com/doc?28169 ELECTRICAL DATA AND ORDERING CODE CATALOG NUMBER BFC2 380 ..... AND PACKAGING URDC (V) CAP. (F) DIMENSIONS wxhxl (mm) MASS (2) (g) AMMOPACK (1) LOOSE IN BOX H = 18.5 mm, P0 = 12.7 mm lt = 4.0 mm + 1.0 mm / - 0.5 mm C-TOL. = 10 % LAST 5 DIGITS OF CATALOG NUMBER SPQ SPQ PITCH = 5.0 mm 0.3 mm; dt = 0.50 mm 0.05 mm; URAC = 160 V; Up-p = 450 V 250 0.0091 45912 0.010 45103 0.011 45113 0.012 45123 0.013 45133 0.015 45153 0.016 45163 0.018 0.020 3.5 x 8.0 x 7.2 0.30 45203 45223 0.024 45243 0.027 45273 0.030 45303 0.033 45333 0.036 45363 0.039 45393 4.5 x 9.0 x 7.2 0.42 2000 1000 2000 750 2000 750 2000 45183 0.022 0.043 1500 45433 Notes (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only * SPQ = Standard Packing Quantity Revision: 08-Sep-16 Document Number: 28136 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP380 www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA - 400 VDC DESCRIPTION VALUE Tangent of loss angle: at 10 kHz at 100 kHz 0.0043 F C 0.0091 F 10 x 10-4 15 x 10-4 0.0091 F < C 0.02 F 10 x 10-4 20 x 10-4 Rated voltage pulse slope (dU/dt)R at 400 V (DC) 100 V/s R between leads for C 1.0 F at 100 V; 1 min > 100 000 M R between interconnected leads and case; 100 V; 1 min > 100 000 M Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 100 V/s 640 V; 1 min Withstanding (DC) voltage between leads and case 2840 V; 1 min Note (1) See "Voltage Proof Test for Metalized Film Capacitors": www.vishay.com/doc?28169 ELECTRICAL DATA AND ORDERING CODE CATALOG NUMBER BFC2 380 ..... AND PACKAGING URDC (V) CAP. (F) DIMENSIONS wxhxl (mm) MASS (2) (g) AMMOPACK (1) LOOSE IN BOX H = 18.5 mm, P0 = 12.7 mm lt = 4.0 mm + 1.0 mm / - 0.5 mm C-TOL. = 10 % LAST 5 DIGITS OF CATALOG NUMBER SPQ SPQ PITCH = 5.0 mm 0.3 mm; dt = 0.50 mm 0.05 mm; URAC = 200 V; Up-p = 560 V 0.0043 55432 0.0047 55472 0.0051 55512 0.0056 55562 0.0062 55622 0.0068 0.0075 400 3.5 x 8.0 x 7.2 0.30 55682 55752 0.0082 55822 0.0091 55912 0.010 55103 0.011 55113 0.012 55123 0.013 55133 0.015 0.016 4.5 x 9.0 x 7.2 0.42 0.018 0.020 1500 2000 1000 55153 55163 750 55183 6.0 x 11.0 x 7.2 0.64 55203 Notes (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only * SPQ = Standard Packing Quantity Revision: 08-Sep-16 Document Number: 28136 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP380 www.vishay.com Vishay BCcomponents SPECIFIC REFERENCE DATA - 630 VDC DESCRIPTION VALUE Tangent of loss angle: at 10 kHz at 100 kHz 0.0015 F C 0.0091 F 10 x 10-4 15 x 10-4 0.0091 F < C 0.01 F 10 x 10-4 15 x 10-4 Rated voltage pulse slope (dU/dt)R at 630 V (DC) 120 V/s R between leads for C 1.0 F at 500 V; 1 min > 100 000 M R between interconnected leads and case; 500 V; 1 min > 100 000 M Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s 880 V; 1 min Withstanding (DC) voltage between leads and case 2840 V; 1 min Note (1) See "Voltage Proof Test for Metalized Film Capacitors": www.vishay.com/doc?28169 ELECTRICAL DATA AND ORDERING CODE CATALOG NUMBER BFC2 380 ..... AND PACKAGING URDC (V) CAP. (F) DIMENSIONS wxhxl (mm) MASS (g) (2) AMMOPACK (1) LOOSE IN BOX H = 18.5 mm, P0 = 12.7 mm lt = 4.0 mm + 1.0 mm / - 0.5 mm C-TOL. = 10 % LAST 5 DIGITS OF CATALOG NUMBER SPQ SPQ PITCH = 5.0 0.3 mm; dt = 0.50 0.05 mm; URAC = 200 V; Up-p = 560 V 0.0022 65222 0.0024 65242 0.0027 65272 0.0030 65302 0.0033 65332 0.0036 65362 0.0039 630 3.5 x 8.0 x 7.2 0.30 65392 0.0043 65432 0.0047 65472 0.0051 65512 0.0056 65562 0.0062 65622 0.0068 65682 0.0075 65752 0.0082 0.0091 0.010 4.5 x 9.0 x 7.2 0.42 1500 65822 1000 2000 750 65912 65103 Notes (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information 0 (2) Weight for short lead product only * SPQ = Standard Packing Quantity Revision: 08-Sep-16 Document Number: 28136 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BFC238021104 BFC238021183 BFC238021203 BFC238021223 BFC238021243 BFC238021273 BFC238021303 BFC238021333 BFC238021363 BFC238021393 BFC238021433 BFC238021473 BFC238021513 BFC238021563 BFC238021623 BFC238021683 BFC238021753 BFC238021823 BFC238021913 BFC238022104 BFC238022183 BFC238022203 BFC238022223 BFC238022243 BFC238022273 BFC238022303 BFC238022333 BFC238022363 BFC238022393 BFC238022433 BFC238022473 BFC238022513 BFC238022563 BFC238022623 BFC238022683 BFC238022753 BFC238022823 BFC238022913 BFC238025104 BFC238025183 BFC238025203 BFC238025223 BFC238025243 BFC238025273 BFC238025303 BFC238025333 BFC238025363 BFC238025393 BFC238025433 BFC238025473 BFC238025513 BFC238025563 BFC238025623 BFC238025683 BFC238025753 BFC238025823 BFC238025913 BFC238026104 BFC238026183 BFC238026203 BFC238026223 BFC238026243 BFC238026273 BFC238026303 BFC238026333 BFC238026363 BFC238026393 BFC238026433 BFC238026513 BFC238026563 BFC238026623 BFC238026753 BFC238026823 BFC238026913 BFC238031133 BFC238031153 BFC238031163 BFC238031183 BFC238031203 BFC238031223 BFC238031243 BFC238031273 BFC238031303 BFC238031333 BFC238031363 BFC238031393 BFC238031433 BFC238031473 BFC238031513 BFC238031563 BFC238031623 BFC238031683 BFC238032133 BFC238032153 BFC238032163 BFC238032183 BFC238032203 BFC238032223 BFC238032243 BFC238032273