PRA135I3-1KBLNW - VISHAY - Datasheet.Directory

PRA073, PRA074, PRA100, PRA135, PRA182 (CNW)

www.vishay.com Vishay Sfernice

Revision: 22-Jul-2019 1Document Number: 53033

For technical questions, contact: sferthinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

High-Precision Thin Film Chip Resistor Arrays, Sulfur Resistant

DESIGN SUPPORT TOOLS AVAILABLE

PRA arrays can be used in most applications requiring a

matched pair (or set) of resistor elements. The networks

provide 1 ppm/°C TCR tracking, a ratio tolerance as tight as

0.01 %, and outstanding stability.

They are available in pitch:

• 0.70 mm for PRA073 (based on case 0302)

• 0.70 mm for PRA074 (based on case 0402)

• 1.00 mm for PRA100 (based on case 0603)

• 1.35 mm for PRA135 (based on case 0805)

• 1.82 mm for PRA182 (based on case 1206)

FEATURES

• High-stability passivated nichrome resistive

layer 0.02 % on ratio, 1000 h at Pn at +70 °C

• Tight TCR (10 ppm/°C) and TCR tracking

(to 1 ppm/°C)

• Very low noise < -35 dB and voltage coefficient

< 0.01 ppm/V

• Ratio tolerance to 0.01 % (R ≥ 200R)

• High-temperature (230 °C) version, see PRA HT

• ESA-qualified version, see PRA HR

• SMD wraparound chip resistor array

• Thin film technology

• Option to withstand humidity test of AEC-Q200

• Sulfur resistant (per ASTM B809-95 humid vapor test)

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL PERFORMANCE

DIMENSIONS

Note

• N represents number of resistors

3D Models

ABSOLUTE TRACKING

TCR 10 ppm/°C 2 ppm/°C

ABSOLUTE RATIO

TOL. 0.1 % 0.01 %

Available

DIM.

PRA073

(0302 base)

PRA074

(0402 base)

PRA100

(0603 base)

PRA135

(0805 base)

PRA182

(1206 base)

mm mil mm mil mm mil mm mil mm mil

A 0.75 ± 0152 29.5 ± 6 1.00 ± 0.152 40 ± 6 1.52 ± 0.152 60 ± 6 1.91 ± 0.152 75 ± 6 3.06 ± 0.152 120 ± 6

BB = N x E (± 0.2 mm)

B = N x E (± 8 mil)

C 0.5 ± 0.127 20 ± 5 0.5 ± 0.127 20 ± 5 0.5 ± 0.127 20 ± 5 0.5 ± 0.127 20 ± 5 0.5 ± 0.127 20 ± 5

D 0.15 ± 0.08 5.9 ± 3 0.25 ± 0 .1 10 ± 4 0.38 ± 0.13 15 ± 5 0.38 ± 0.13 15 ± 5 0.4 ± 0.13 16 ± 5

E 0.7 27.5 0.7 27.5 1 40 1.35 53 1.825 72

F 0.55 ± 0.1 21.5 ± 4 0.55 ± 0.1 21.5 ± 4 0.7 ± 0.1 27.6 ± 4 1.05 ± 0.1 41.4 ± 4 1.525 ± 0.1 6 ± 4

Gmin. 0.28 11 0.29 11.4 0.49 19.3 0.88 34.5 1.99 78.3

Xmax. 0.51 20 0.51 20 0.66 26 1.01 39.8 1.49 58.7

Zmax. 1.8 70.9 2.05 80.7 2.57 101.2 2.96 116.5 4.11 161.8

Suggested land pattern

(according to IPC-7351A)

Xmax.

Zmax. Gmin.

One common point

Independent resistors

PRA073, PRA074, PRA100, PRA135, PRA182 (CNW)

www.vishay.com Vishay Sfernice

Revision: 22-Jul-2019 2Document Number: 53033

For technical questions, contact: sferthinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Part number can only have 18 digits. Depending on information needed a compromise has to be found. Consult Vishay

(2) When the last digit(s) of the ohmic value is (are) 0, it (they) must be omitted

E.g.:PRA100I4-2K20BWN → must be ordered under PRA100I4-2K2BWN

PRA100I4-2K00BWN → must be ordered under PRA100I4-2KBWN

Notes

(1) At +70 °C

(2) 0.02 % (R ≥ 50 Ω), 0.01 % (R ≥ 200 Ω)

(3) At -40 °C to +125 °C

(4) At -40 °C to +125 °C, 1 ppm/°C on request

Note

(1) For temperature up to 230 °C, see PRA HT

(www.vishay.com/doc?53057) or consult factory

GLOBAL PART NUMBER INFORMATION (1)

New Global Part Numbering: PRA100I4-5K62BWBT51

GLOBAL

MODEL CONFIG. NUMBERS OF

RESISTORS VALUE (2) ABS. TOL. RATIO TOL. TERMINATION PACKAGING OPTION

PRA073

PRA074

PRA100

PRA135

PRA182

I: independent

C: common

2 to 8 Decimal

R or K

B = 0.1 %

D = 0.5 %

B = 0.1 %

W = 0.05 %

P = 0.02 %

L = 0.01 %

B: SnPb over

nickel barrier

N: SnAg over

nickel barrier

G: gold over

nickel barrier

For more

information see

“Codification

of packaging”

table

Leave

blank

if no

option

B: lead bearing version

N and G: lead (Pb)-free/

RoHS version

For different ohmic values on a given network a specific part number is used

CNW 1368 T

GLOBAL

MODEL REFERENCE For more information see

“Codification of packaging” table

Historical Part Number example: PRA100 I 4 5K62 0.1 % 0.05 % TR R0051

PRA100 I 4 5K62 0.1 % 0.05 % TR R0099

HISTORICAL

MODEL CONFIG. NUMBERS OF

RESISTORS OHMIC VALUE ABS. TOL. RATIO TOL. PACKAGING OPTION

STANDARD ELECTRICAL SPECIFICATIONS

MODEL SIZE

RESISTANCE

RANGE

POWER

RATING PER

RESISTOR (1)

ABSOLUTE

TOLERANCE

± %

RATIO

TOLERANCE (2)

ABSOLUTE

TCR (3)

± ppm/°C

RATIO

TCR (4)

± ppm/°C

PRA073 073 10 to 50K 0.030 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2

PRA074 074 10 to 100K 0.040 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2

PRA100 100 10 to 250K 0.100 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2

PRA135 135 10 to 500K 0.125 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2

PRA182 182 10 to 2M 0.200 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2

CLIMATIC SPECIFICATIONS

Operating temperature range (1) -55 °C to +155 °C

PERFORMANCE VS. HUMID SULFUR VAPOR

Test conditions 50 °C ± 2 °C, 85 % ± 4 % RH,

exposure time 500 h

Test results Resistance drift < (0.05 % R + 0.05 Ω),

no corrosion products observed

PERFORMANCES

TEST SPECIFICATIONS

Noise ≤ -35 dB

Voltage coefficient ≤ 0.01 ppm/V

Limiting voltage

PRA073 20 V

PRA074 40 V

PRA100 50 V

PRA135 100 V

PRA182 150 V

RA1 0 0 I 4 - 5PK62BWBT 99

PRA073, PRA074, PRA100, PRA135, PRA182 (CNW)

www.vishay.com Vishay Sfernice

Revision: 22-Jul-2019 3Document Number: 53033

For technical questions, contact: sferthinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SPECIAL FEATURES

Resistance values can be different on a given network

(R max./R min. as high as 300). Tooling charges might

be required depending on the ohmic values in the

same network. Please, consult Vishay Sfernice for ohmic

values, tolerances and also temperature coefficient (e.g.

± 1 ppm/°C) outside the standard range.

AEC-Q200 OPTION: 0058

Vishay Sfernice offers a part compliant to AEC-Q200

specification.

PACKAGING

Several types of packaging are available: Waffle-pack and tape and reel.

Note

(1) Other sizes upon request

MECHANICAL SPECIFICATIONS

Substrate Alumina

Technology Thin film

Film Nickel chromium with mineral passivation

Terminations

B type: SnPb over nickel barrier

N type: SnAg over nickel barrier

G type: Gold over nickel barrier

NUMBER OF PIECES PER PACKAGE

SIZE MOQ WAFFLE PACK MAX. QUANTITY PER BOX TAPE AND REEL (1)

MIN. MAX.

PRA073 x 2

100

400

PRA073 x 3 100

PRA073 x 4 140

PRA073 x 5 140

PRA073 x 6 60

PRA073 x 7 60

PRA073 x 8 60

PRA074 x 2

100

400

PRA074 x 3 100

PRA074 x 4 140 100 4000

PRA074 x 5 140

PRA074 x 6 60

PRA074 x 7 60

PRA074 x 8 60

PRA100 x 2

100

100 100 4000

PRA100 x 3 140 100 4000

PRA100 x 4 60 100 4000

PRA100 x 5 50

PRA100 x 6 50 100 3000

PRA100 x 7 50

PRA100 x 8 28 100 4000

PRA135 x 2

100

140 100 4000

PRA135 x 3 60

PRA135 x 4 60 100 4000

PRA135 x 5 50

PRA135 x 6 28 100 4000

PRA135 x 7 24

PRA135 x 8 24

PRA182 x 2

100

60 100 2000

PRA182 x 3 60 100 4000

PRA182 x 4 50 100 2000

PRA182 x 5 21 100 4000

PRA182 x 6 24

PRA182 x 7 24

PRA182 x 8 20

CODIFICATION OF PACKAGING

CODE 18 PACKAGING

WAFFLE PACK

W100 min., 1 mult

PLASTIC TAPE (Standard for all sizes.)

T100 min., 1 mult

TA 100 min., 100 mult

TB 250 min., 250 mult

TC 500 min., 500 mult

TD 1000 min., 1000 mult

TE 2500min., 2500 mult

TF Full tape (quantity depending on size of chips)

PRA073, PRA074, PRA100, PRA135, PRA182 (CNW)

www.vishay.com Vishay Sfernice

Revision: 22-Jul-2019 4Document Number: 53033

For technical questions, contact: sferthinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGING RULES

Waffle Pack

Can be filled up to maximum quantity indicated in the table

here above, taking into account the minimum order quantity.

When quantity ordered exceeds maximum quantity of a

single waffle pack, the waffle packs are stacked up on the

top of each other and closed by one single cover.

To get “not stacked up” waffle pack in case of ordered

quantity > maximum number of pieces per package:

Please consult Vishay Sfernice for specific ordering

code.

Tape and Reel

Can be filled up to maximum quantity indicated in the table

here above, taking into account the minimum order quantity.

When quantity ordered is between the MOQ and the

maximum reel capacity, only one reel is provided.

When several reels are needed for ordered quantity

within MOQ and maximum reel capacity: Please consult

Vishay Sfernice for specific ordering code.

POWER RATING

MARKING (1)

On the primary package, printed information includes

Vishay S.A. trademark series and model, schematic number

of resistors, ohmic value, absolute tolerance, ratio tolerance,

type of termination: B tinned over nickel barrier.

Marking on parts:

All resistors inside network have same ohmic value:

If number of resistors inside network < or = 3

For instance ohmic value 13K:

Coded 1302: M = 1, C = 3, D = 0, U = 2

If number of resistors inside networks > 3

E.g.: 4 resistors in the network:

Ohmic value 13K: Coded 1302: M = 1, C = 3, D = 0, U = 2

Resistors inside the network have different ohmic value, a

CNW number is assigned by Vishay Sfernice

If number of resistors inside network < or = 3

E.g.: CNW1538: M = 1, C = 5, D = 3, U = 8

If number of resistors inside networks > 3

E.g.: 4 resistors in the network:

E.g.: CNW1314: M = 1, C = 3, D = 1, U = 4

Note

(1) PRA073 and PRA074 are NOT marked. For CNW of size 073 and 074, only a “dot” is marked to identify R1

Note

• Rn: Nominal resistance

07020 40 60 80 100 120 140 155

100

Ambient Temperature in °C

Rated Power (%)

R1 R2

R3 R4

CD U

R1 R2

R3 R4

CD U

PERFORMANCE

TESTS CONDITIONS

CECC REQUIREMENTS

DRIFTS

ABSOLUTE PER

(Typical Values) RATIO

Overload 2.5 Un/2 s 0.05 % Rn + 0.05 Ω0.01 % Rn

Climatic sequences -55 °C to +155 °C/5 moisture cycles 0.1 % Rn + 0.05 Ω0.01 % Rn

Thermal shock -55 °C to +155 °C/5 cycles 30' 0.05 % Rn + 0.05 Ω0.01 % Rn

Load life 1000 h/Pn at 70 °C 0.1 % Rn + 0.05 Ω0.02 % Rn

Resistance to solder heat 260 °C/10 s 0.05 % Rn + 0.05 Ω0.01 % Rn

Moisture resistance 0.01 Pn at + 40 °C 93 % RH 0.1 % Rn + 0.05 Ω0.01 % Rn

High temperature storage 1000 h/no load at +155 °C 0.1 % Rn + 0.05 Ω0.02 % Rn

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.