528
Features––––––––––––––––––––––––
• Heat resistant design suitable for surface
mounting
The housing is made of heat resistant plastic to allow reflow
soldering.
• Staggered surface mount tails
The lead pitch is thus 1.0mm (.039"), which enables connector
mounting operation easier.
• Embossed tape for automatic mounting
The FLT connector is packaged in embossed tape for
automatic mounting. The plastic reel can be used repeatedly,
good for eco-system.
• FPC insertion is easy
Staggered and unique contact point layout can reduce the
FPC insertion force, yet with secure retention force.
• Compact design
This connector measures only 4.15mm (.163") high after
mounting, with a reduced surface mounting area, as solder
tabs are not necessary because of the staggered solder tail
construction.
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/50m Ωmax.
After environmental testing/20m Ωmax.
(Variance from the initial)
• Insulation resistance: 500M Ωmin.
• Withstanding voltage: 200V AC/minute
• Applicable FPC: Lead pitch/0.5mm (.020")
Lead width/0.35mm (.014")
Mating part thickness/
0.30 ±0.05mm (.012"±.002")
<
Note
>
FPC to be actually used should be checked for applicability.
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812